虚拟式声显微镜及应用技术研究

本文描述一台虚拟式扫描声显微镜及应用技术研究，它的硬件特别简单，仅由一台带有超高速A/D卡和快脉冲收发卡的PC机和机械扫描系统组成，主要的功能均由软件完成，脉冲收发卡仅包括脉冲产生和高频放大器，A/D卡采用PCI总线，采样率1GSPS，数据传输率100MB/s，系统能采集并实时显示频率达百兆的未检波回波信号，采修订本以的信号经软件处理，可在屏幕上实时显示样品的A、B、C型幅度像或相位像，仪器利用信号处理技术提高信号的信噪比；进行特征提取，识别，该仪器在材料识别，电子、光电子器件和焊接质量检测等方面功能较强，具有广阔的开发应用前景。     

复合材料的超声检测新技术 Ⅰ.声-超声技术

本文对于在航空航天工业中占有重要地位的先进复合材料的两项超声检测新技术的原理、特点和应用进行了简明介绍。本部分先介绍声－超声（ＡＵ）技术。     

基于PC机的脉冲序列发生器

为了降低谱仪的复杂性和成本，文中提出了基于PC机的脉冲序列发生器设计方案. 详细讨论了在Windows 98和Windows XP下通过关中断的方法来保证脉冲序列时序的精度和稳定性，通过实验给出了基于PC机的脉冲序列发生器的短期稳定度和长期稳定度，最后通过自旋回波实验直接验证了该方案的可行性.     

光声显微成象——一种新型显微成象技术

本文概述了光声显微镜的发展概况、基本原理、装置系统、成象特点以及应用前景.以国内外已经建立的光声显微镜装置及其所取得的研究成果,说明这种成象系统在物理、化学、生物、医学及其它科学研究和生产实际中将发挥重要作用.     

基于PCI总线的PC机再入遥测站平台设计

以PC机为主体的遥测地面站是将遥测系统中的接收机、同步器、解调器、时间码和信号源等主要部件小型化、智能化和模块化，作为PC机的功能模块卡插入PC机的PCI扩展槽中，使PC机升级成为一个功能齐全的PC机遥测站。PC机遥测站已成为国内外遥测系统发展的一个重要方向，有些相关产品已非常成熟，不仅投入工程使用，而且作为一种通用遥测平台推广到许多应用领域，为开发PC机再入遥测站奠定了良好的基础。     

光声信号的声透镜层析成像研究

提出了一种用声透镜实现光声层析成像的新模式。从理论上计算出了声透镜的响应，测出了已知声场中标准物像面处的声场分布。考虑到圆形活塞振源的指向性，对代表物成像进行了理论修正，并与实验结果做了对比分析。研究表明，利用声透镜可以实现光声层析成像，并经图像重构得到了生物组织中异物的光声图像，横向、纵向分辨力较高。     

混凝土材料声发射技术研究综述

本对混凝土材料声发射技术研究的历史，现状及涉及的领域进行了概括与总结。对混凝土材料声发射机理，声发射参数与力学参数间的关系。声发射在断裂力学中的应用，混凝土材料的凯塞效应与应用以及现代非线性理论和方法与声发射技术的结合等问题进行了评价与展望。     

一种基于双波长的光声测温技术

光声测温是一种利用光声效应来进行温度监控的新方法,具有非侵入式、高灵敏度和探测深度较深等优点.但现有的单波长光声测温方法极易受到系统及测量环境干扰而导致测量精度降低.为了解决这一问题,本文提出了一种双波长光声温度测量方法.在光声测温理论的基础上,分析推导了双波长光声测温的基本原理,并进行了仿体及离体组织样品的双波长光声测温实验.实验结果显示,与传统单波长模式相比,双波长模式下的光声温度测量误差明显减小,测量精度平均提高35%以上.研究结果表明双波长光声测温方法能够有效提高光声温度测量的精度和稳定性,可作为一种更精准的光声温度监控方法应用于医疗手术等领域.     

基于CCD和PC机的高精度刚度检测系统的研制

根据某类球头杆零件的高精度刚度检测的实际需要 ,开展了将 CCD技术应用于零件刚度检测领域的研究 ,并研制出一套基于 CCD和 PC机技术的此类球头杆零件的高精度刚度检测系统。认为 CCD技术在工业刚度检测领域具有良好的应用前景。     

基于PC机的虚拟现实技术研究

本文利用所需额外硬件很少的立体显示技术,研制了一种基于微机平台的虚拟现实系统。这个系统利用最新推出的微机版的三维图形标准Open GL建模,以实时动画形式实现了真正的交互性,立体视觉效果明显,可以给观赏者提供真实的临场感和亲自控制的参与感。与已研制出的“三维立体显示系统”相比,有了实质性的进步。     

All-optical adaptive scanning acoustic microscope

We have constructed a fast laser-based surface acoustic wave (SAW) microscope, which may be thought of as a non-perturbing scanning acoustic microscope. The instrument is capable of rapid high resolution vector contrast imaging at several discrete frequencies, without any damage to the sample. Tailoring the generating optical distribution using computer-generated holograms allows us to both focus the acoustic waves (increasing their amplitude) and to spread the optical power over the sample surface (preventing damage). Accurate quantitative amplitude and phase (velocity) measurements and unique acoustic contrast mechanisms are possible with our instrument based on this technology due to the non-perturbing nature and the instrument geometries.However, the complexity of the optical generation profile leads to a strong dependence on material properties such as the SAW velocity and material anisotropy. We address these issues in this paper, and demonstrate how a spatial light modulator may be used to adapt the generating optical distribution to compensate for the material properties. This facilitates simpler alignment and velocity matching, and, combined with an acoustic wavefront sensor, will allow real-time adjustment of the generating source to enable imaging on anisotropic materials.     

300MHZ scanning laser acoustic microscope

The knife—edge and harmonic technique in the Scanning LaserAcoustic Microscope is studied in this paper.The operating frequency of theSLAM can be increased from 100MHz to 300MHz by using the harmonic tech-nique.The acoustic images of some samples are obtained on our SLAM at300MHz.     

300MHz激光扫描声学显微镜

本文对激光扫描声学显微镜（ＳＬＡＭ）的刀口理论以及利用谐波技术提高其工作频率的方法进行了研究．实验上实现了使基波频率为１００ＭＨｚ的ＳＬＡＭ工作于３００ＭＨｚ三次谐波上．最后给出了一些样品在３００ＭＨｚＳＬＡＭ系统上较清晰的声学图像．     

Schlieren成像和声场可视化

Schlieren技术是利用声场引起透明媒质光折射率的变化而实现声场可视化的光学成像技术。它具有对声场无干扰、快速、瞬态成像的特点。本文利用二维光学Fourier变换分析了Schlieren技术的成像原理,在采用连续激光和高速ICCD的Schlieren成像系统中,实验研究了平面波声场和线聚焦声场中换能器光学校准方法和声压的定量检测技术。发展声场瞬态和动态成像技术,观测了声波的聚焦过程和固-液界面的声场分布和变化。这些结果表明Schlieren技术是一种有效的声场可视化和定量检测的光学成像技术。     

Distance resolution of the scanning acoustic air microscope

In this paper the experimental results concerning the distance resolution measurements performed with the air microscope operating with a focussing transducer at 1.27 MHz are presented. A distance resolution of 3 nm has been achieved, corresponding to the average distance between two molecules in air at normal conditions. The influence of air temperature variations on the distance measurements has been taken into account.     

Measuring scanning acoustic microscope with a harmonic sounding signal

A concept of a scanning acoustic microscope with a harmonic sounding signal for measuring the parameters of local homogeneous regions of flat samples is proposed. The distinctive feature of the device is the utilization of the Doppler effect that occurs in the sounding wave reflected from the sample surface when the sample is uniformly moved relative to the focusing ultrasonic transducer of the microscope. It is theoretically demonstrated that the spectrum of the received signal is determined by the product of the reflection coefficient and the transfer function of the transducer. The errors of the measurement technique are considered, and the sources of signal distortions are analyzed. High sensitivity of the measurement results to the errors of the scanning system is demonstrated. The developed measuring microscope is described, in which an acoustic interferometer is used to provide the necessary precision of the scanning coordinate measurement. The microscope transfer function is measured for the frequency of the sounding signal 65 MHz, and the values of density and bulk wave velocities are determined for a homogeneous sample by the measured phase of the reflection coefficient using the technique of nonlinear estimation of parameters. With fused quartz used as an example, it is shown that the measurement error is 7.2% for density and 2.3 and 0.7% for the velocities of longitudinal and transverse waves, respectively. In addition, the velocity of a leaky surface wave (SAW) is determined by two methods. One method is based on measuring the position of the inflexion point for the experimental phase of the reflection coefficient, and the other is based on calculating the SAW velocity corresponding to the measured values of density and bulk wave velocities. The errors of these methods are found to be equal to 0.42 and 0.17%, respectively.     

Determination of elastic constants using a scanning acoustic microscope

A cubic single crystal of GaAs with two polished (100)-surfaces was examined with a scanning acoustic microscope (SAM) in transmission mode. The images of the transmitted ultrasound amplitude measured at frequencies of 350–400 MHz contain sufficient information about the acoustic anisotropy of the crystal to determine the complete set of the three elastic constants C₁₁, C₁₂, C₄₄ numerically. This was done by an interactive fitting procedure correlating simulated images with the measured one. This technique seems to be universally applicable to virtually all sorts of single crystals. Compared to plane wave investigations it saves preparatory labour since one single crystal orientation suffices for a determination of all elastic constants.     

激光扫描声学显微镜光学系统的设计

半导体激光器具有半导体和固体器件的许多优点：结构紧凑、效率高、价格便宜、长寿命，在许多方面优于气体激光器，因此在一些测量领域有较好的应用前景。本文基于棱镜对光的一维压缩及新型半导体激光器，对激光扫描声学显微镜的光学系统进行了新的设计，给出了相关数据及具体技术指标，实验证实其光学性能满足要求。整个光学系统具有结构紧凑、可靠性高、使用方便等特点，现已用于激光扫描声学显微镜定型设计。     

激光扫描声显微镜物理系统的设计及实验

本文对激光扫描声显微镜中刀口及干涉仪二种解调器进行了比较,对干涉仪解调器的实用设计及声台有关问题作了详细分析,提供了各参量的选择依据。最后给出了一些实验结果。