NH_4Y_3F_(10)多孔纳米晶的制备及其在MALDI-TOF-MS中的应用(英文)

利用水热法合成出NH4Y3F10多孔纳米晶。由于Y3+离子的激发态能量可以转移给具有较高振动能的有机分子,因此这些多孔纳米晶可以作为基质辅助激光解析电离飞行时间质谱的基体材料,用于检测小分子和聚乙二醇。通过与商品化的基体材料(CHCA、DHB)对比,证明NH4Y3F10多孔纳米晶是一种性能优异的基体材料。这种新型基体材料已经成功应用于有机分子、小肽、C60、缺氧诱导因子(HIFs)和聚乙二醇的分子量的检测,显示出这种基体材料具有广泛的应用前景。     

12-Tungstophosphates I-mmobilized on Chemically Modified Mesoporous Silica SBA-15

A functionalized material. PW/SBA-15m, was prepared successfully in diluted H2SO4 aqueous solutions by immobilizing 12-tungstophosphates on chemically modified mesoporous silica SBA-15 and characterized by elemental analysis, FTIR, ^31p MAS NMR, XRD and TEM. The results indicate that the framework of SBA-15 and the Keggin structure of PW12O40^3- were retained, and that 23%-33% (mass fraction) of PW12O40^3- wasimmobilized; the PW12O40^3- anions were finely dispersed on the pore wall of SBA-15. Having been leached in ethanol at 60 ℃ for 7 h, the loss of PW12O40^3- anions was not found.     

One pot synthesis of functionalized SBA-15 by using an 8-hydroxyquinoline-5-sulfonamide-modified organosilane as precursor

A novel functionalized SBA-15 mesoporous material was prepared through co-condensation of tetraethylorthosilicate with an 8-hydroxyquinoline-5-sulfonamide-modified organosilane precursor in the presence of P123 as structure-directing agent. After removal of template, the obtained material was characterized by powder X-ray diffraction (XRD), nitrogen adsorption-desorption, Fourier transform infrared (FT-IR), thermal analysis (TGA-DTA), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and elemental analysis. Then, aluminum quinolate complex was attached covalently to this functionalized SBA-15 by using coordinating ability of grafted 8-HQ and its emission spectra showed a slightly blue shift in comparison with AlQ(3) complex.     

Functionalized SBA-15 materials as carriers for controlled drug delivery: influence of surface properties on matrix-drug interactions

Mesoporous SBA-15 materials were functionalized with amine groups through postsynthesis and one-pot synthesis, and the resulting functionalized materials were investigated as matrixes for controlled drug delivery. The materials were characterized by FTIR, N(2) adsorption/desorption analysis, zeta potential measurement, XRD, XPS, and TEM. Ibuprofen (IBU) and bovine serum albumin (BSA) were selected as model drugs and loaded onto the unmodified and functionalized SBA-15. It was revealed that the adsorption capacities and release behaviors of these model drugs were highly dependent on the different surface properties of SBA-15 materials. The release rate of IBU from SBA-15 functionalized by postsynthesis is found to be effectively controlled as compared to that from pure SBA-15 and SBA-15 functionalized by one-pot synthesis due to the ionic interaction between carboxyl groups in IBU and amine groups on the surface of SBA-15. However, SBA-15 functionalized by one-pot synthesis is found to be more favorable for the adsorption and release of BSA due to the balance of electrostatic interaction and hydrophilic interaction between BSA and the functionalized SBA-15 matrix.     

Using oxidized carbon nanotubes as matrix for analysis of small molecules by MALDI-TOF MS

Oxidized carbon nanotubes are tested as a matrix for analysis of small molecules by matrix assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF-MS). Compared with nonoxidized carbon nanotubes, oxidized carbon nanotubes facilitate sample preparation because of their higher solubility in water. The matrix layer of oxidized carbon nanotubes is much more homogeneous and compact than that of nonoxidized carbon nanotubes. The efficiency of desorption/ionization for analytes and the reproducibility of peak intensities within and between sample spots are greatly enhanced on the surface of oxidized carbon nanotubes. The advantage of the oxidized carbon nanotubes in comparison with alpha-cyano-4-hydroxycinnamic acid (CCA) and carbon nanotubes is demonstrated by MALDI-TOF-MS analysis of an amino acid mixture. The matrix is successfully used for analysis of synthetic hydroxypropyl beta-cyclodextrin, suggesting a great potential for monitoring reactions and for product quality control. Reliable quantitative analysis of jatrorrhizine and palmatine with a wide linear range (1-100 ng/mL) and good reproducibility of relative peak areas (RSD less than 10%) is achieved using this matrix. Concentrations of jatrorrhizine (8.65 mg/mL) and palmatine (10.4 mg/mL) in an extract of Coptis chinensis Franch are determined simultaneously using the matrix and a standard addition method.     

Discrete complexes immobilized onto click-SBA-15 silica: controllable loadings and the impact of surface coverage on catalysis

Azidopropyl functionalized mesoporous silica SBA-15 were prepared with variable azide loadings of 0.03-0.7 mmol g(-1) (~2-50% of maximal surface coverage) through a direct synthesis, co-condensation approach. These materials are functionalized selectively with ethynylated organic moieties through a copper-catalyzed azide alkyne cycloaddition (CuAAC) or "click" reaction. Specific loading within a material can be regulated by either the azide loading or limiting the alkyne reagent relative to the azide loading. The immobilization of ferrocene, pyrene, tris(pyridylmethyl)amine (TPA), and iron porphyrin (FeTPP) demonstrates the robust nature and reproducibility of this two-step synthetic attachment strategy. Loading-sensitive pyrene fluorescence correlates with a theoretically random surface distribution, rather than a uniform one; site-isolation of tethered moieties ~15 ? in length occurs at loadings less than 0.02 mmol g(-1). The effect of surface loading on reactivity is observed in the oxygenation of SBA-15-[Cu(I)(TPA)]. SBA-15-[Mn(II)(TPA)]-catalyzed epoxidation exhibits a systematic dependence on surface loading. A comparison of homogeneous, site-isolated and site-dense complexes provides insight into catalyst speciation and ligand activity.     

Synthesis, characterization, and luminescence properties of the ternary europium complex covalently bonded to mesoporous SBA-15

A novel mesoporous SBA-15 type of hybrid material (phen-SBA-15) covalently bonded with 1,10-phenanthroline (phen) ligand was synthesized by co-condensation of tetraethoxysilane (TEOS) and the chelate ligand 5-[N,N-bis-3-(triethoxysilyl)propyl]ureyl-1,10-phenanthroline (phen-Si) in the presence of Pluronic P123 surfactant as a template. The preservation of the chelate ligand structure during the hydrothermal synthesis and the surfactant extraction process was confirmed by Fourier transform infrared (FTIR) and (29)Si MAS NMR spectroscopies. SBA-15 consisting of the highly luminescent ternary complex Eu(TTA)(3)phen (TTA = 2-thenoyltrifluoroacetone) covalently bonded to a silica-based network, which was designated as Eu(TTA)(3)phen-SBA-15, was obtained by introducing the Eu(TTA)(3).2H(2)O complex into the hybrid materials via a ligand exchange reaction. XRD, TEM, and N(2) adsorption measurements were employed to characterize the mesostructure of Eu(TTA)(3)phen-SBA-15. For comparison, SBA-15 doped with Eu(TTA)(3).2H(2)O and Eu(TTA)(3)phen complexes and SBA-15 covalently bonded with a binary europium complex with phen ligand were also synthesized, and were named SBA-15/Eu(TTA)(3), SBA-15/Eu(TTA)(3)phen, and Eu-phen-SBA-15, respectively. The detailed luminescence studies on all the materials showed that, compared with the doping sample SBA-15/Eu(TTA)(3)phen and binary europium complex functionalized sample Eu-phen-SBA-15, the Eu(TTA)(3)phen-SBA-15 mesoporous hybrid material exhibited higher luminescence intensity and emission quantum efficiency. Thermogravimetric analysis on Eu(TTA)(3)phen-SBA-15 demonstrated that the thermal stability of the lanthanide complex was evidently improved as it was covalently bonded to the mesoporous SBA-15 matrix.     

8-羟基喹啉铜(Ⅱ)功能化SBA-15的制备、表征及催化性质

利用3-氨丙基功能化的介孔SBA-15(APS-SBA-15)作为载体, 通过C—N共价键将8-羟基喹啉铜(Ⅱ)固定到APS-SBA-15孔道中, 制备了8-羟基喹啉铜(Ⅱ)功能化的SBA-15催化剂[Cu(Ⅱ)-Q-APS-SBA-15], 并将其用于以质量分数30%的过氧化氢为氧化剂的苯酚羟化反应中. 结果表明, Cu(Ⅱ)-Q-APS-SBA-15呈现出较高的苯酚转化率和苯二酚选择性.     

一步法直接合成有机季铵功能修饰的介孔分子筛SBA-15

以P123 嵌段共聚物为模板剂, 3-三甲基丙基氯化铵三甲氧基硅烷(TMAPS)为修饰剂, 酸性条件下一步法直接合成了有机季铵基团功能修饰的SBA-15, 并通过XRD、TEM、N2吸附-脱附、Raman 光谱等对功能化样品的结构和性质进行了表征, 对一步法合成TMAPS 修饰的SBA-15 的可能反应机理进行了探讨. 修饰后的SBA-15 仍然保持了二维六方特征介孔结构, 随着TMAPS负载量的增大, SBA-15 孔道有序度下降, 孔径、孔容和比表面积也随之下降. 有机季铵基团在SBA-15 孔道表面均匀分散, 可与HAuCl4通过快速离子交换制备Au 颗粒高度分散的Au-SBA-15.     

Controlled drug release from bifunctionalized mesoporous silica

Serial of trimethylsilyl-carboxyl bifunctionalized SBA-15 (TMS/COOH/SBA-15) have been studied as carriers for controlled release of drug famotidine (Famo). To load Famo with large capacity, SBA-15 with high content of carboxyl groups was successfully synthesized by one-pot synthesis under the assistance of KCl. The mesostructure of carboxyl functionalized SBA-15 (COOH/SBA-15) could still be kept even though the content of carboxyl groups was up to 57.2%. Increasing carboxyl content could effectively enhance the loading capacity of Famo. Compared with pure SBA-15, into which Famo could be hardly adsorbed, the largest drug loading capacity of COOH/SBA-15 could achieve 396.9 mg/g. The release of Famo from mesoporous silica was studied in simulated intestine fluid (SIF, pH=7.4). For COOH/SBA-15, the release rate of Famo decreased with narrowing pore size. After grafting TMS groups on the surface of COOH/SBA-15 with hexamethyldisilazane, the release of Famo was greatly delayed with the increasing content of TMS groups.     

pH值响应性毒死蜱/铜席夫碱配合物改性SBA-15的制备及缓释性能

以3-氨丙基三乙氧基硅烷（APTES）、水杨醛和铜离子为改性剂,通过后嫁接法制得铜席夫碱配合物改性SBA-15（Cu-SBA-15）,并以毒死蜱为模型药物,制备了毒死蜱/铜席夫碱配合物改性SBA-15缓释体系。利用TEM、SEM、XRD、N₂吸附-脱附、TG、FTIR和XPS对SBA-15、氨基改性SBA-15（NH₂-SBA-15）、水杨醛希夫碱改性SBA-15（SA-SBA-15）的形貌、结构和Cu-SBA-15的配位情况进行了表征,考察了SBA-15在改性前后对毒死蜱的吸附量和缓释性能,并着重探究了毒死蜱/铜席夫碱配合物改性SBA-15载药体系在不同pH值下的释药行为。结果表明,APTES和水杨醛能够通过后嫁接法修饰于SBA-15,修饰后仍保持十分有序的孔道结构。SBA-15通过改性后,其对毒死蜱的吸附量由100 mg·g^-1增加至195 mg·g^-1,且其对药物的缓释性能也得到改善。毒死蜱/铜席夫碱配合物改性SBA-15缓释体系显示出明显的pH值响应性,pH=3时的释药速率大于pH=11时,而在中性条件下的缓释效果相对最好。载药体系的释药行为可用Riger-Peppas动力学模型来描述,其药物释放由Fick扩散控制。     

pH值响应性毒死蜱/铜席夫碱配合物改性SBA-15的制备及缓释性能

以3-氨丙基三乙氧基硅烷(APTES)、水杨醛和铜离子为改性剂,通过后嫁接法制得铜席夫碱配合物改性SBA-15(Cu-SBA-15),并以毒死蜱为模型药物,制备了毒死蜱/铜席夫碱配合物改性SBA-15缓释体系。利用TEM、SEM、XRD、N2吸附-脱附、TG、FTIR和XPS对SBA-15、氨基改性SBA-15(NH_2-SBA-15)、水杨醛希夫碱改性SBA-15(SA-SBA-15)的形貌、结构和Cu-SBA-15的配位情况进行了表征,考察了SBA-15在改性前后对毒死蜱的吸附量和缓释性能,并着重探究了毒死蜱/铜席夫碱配合物改性SBA-15载药体系在不同pH值下的释药行为。结果表明,APTES和水杨醛能够通过后嫁接法修饰于SBA-15,修饰后仍保持十分有序的孔道结构。SBA-15通过改性后,其对毒死蜱的吸附量由100 mg·g~(-1)增加至195 mg·g~(-1),且其对药物的缓释性能也得到改善。毒死蜱/铜席夫碱配合物改性SBA-15缓释体系显示出明显的pH值响应性,pH=3时的释药速率大于pH=11时,而在中性条件下的缓释效果相对最好。载药体系的释药行为可用Riger-Peppas动力学模型来描述,其药物释放由Fick扩散控制。     

Activation energy of the reaction between hexacyanoferrate (Ш) and thiosulfate ions catalyzed by platinum nanoparticles confined in nanometer space

Pt nanoparticles (NPs) have been successfully encapsulated in SBA-15 mesoporous silica support. The silica was firstly functionalized by polyaminoamine (PAMAM) dendrimers with various generations and provided different nanometer space for Pt NPs. The growth of Pt NPs is restricted by the double confinement effect of PAMAM dendrimers and SBA-15 mesopores. The Pt NPs can be precisely controlled to localize inter- or intradendrimeric within SBA-15 tunnels. The different pore structures of Gn-PAMAM-SBA-15 (Gn-PS15) support have great influence on the catalytic performance of the encapsulated Pt NPs. The blocking structure of higher generation Gn-PS15 support debased the catalytic performance and increased the activation energy of reaction between Fe(CN)(6)(3-) and S(2)O(3)(2-) in a certain degree.     

负载型双噁唑啉催化剂上的不对称Diels-Alder反应

 分别以乙烷桥键磺酸官能化的有机-无机杂化介孔材料、十二钨磷酸铯、活化硅胶以及SBA-15为载体,通过非共价键作用制备了负载型双噁唑啉催化剂,并将该催化剂用于催化3-((E)-2-丁烯酰基)-1,3-噁唑啉-2-酮和环戊二烯的不对称Diels-Alder反应. 研究表明,催化剂的性能取决于载体本身以及载体表面阴离子的性质. 以SBA-15为载体时产物的对映体选择性较低,可归因于载体表面较低的羟基浓度.     

New pi-complexation adsorbents for propane-propylene separation

New adsorbents were prepared and tested for the separation of propane-propylene mixtures by adsorption. The ordered mesoporous material SBA-15 was used as the starting material for silver-ion deposition for pi-complexation with propylene. Two different loadings of silver were evaluated. Adsorption equilibrium and kinetic measurements of propane and propylene in the matrix (pure SBA-15) and the silver-modified adsorbents were performed at 323, 343, and 373 K. In this temperature range, the selectivity of propylene in one of the materials (Ag/SBA-15 = 0.5) is in the range 13-22 because the amount of propane adsorbed is very small, 0.095 mmol/g of propane versus 1.12 mmol/g of propylene at 100 kPa and 343 K. The diffusivity of both hydrocarbons is not seriously affected by the introduction of silver into the mesoporous structure.     

高分散TiO_2/SBA-15的制备及光催化性能

提出了一种制备高分散TiO2/SBA-15光催化剂的新方法.以钛酸四正丁酯(TB)和羧基改性的SBA-15(COOH/SBA-15)为原料,利用COOH/SBA-15表面上高分散的羧基与TB的配合作用将TB锚定,经过溶剂热及焙烧处理制得TiO2/SBA-15光催化剂.采用粉末X射线衍射(XRD),N2吸脱附,傅里叶变换红外光谱(FT-IR),透射电镜(TEM)等对所得催化剂进行了表征.结果表明:所得TiO2/SBA-15光催化剂为高结晶度的锐钛矿晶型,TiO2均匀地分散在SBA-15表面,TiO2/SBA-15光催化剂保持较好的介孔特征结构,具有较大比表面积.以降解罗丹明B(RhB)为探针反应,考察了所得TiO2/SBA-15光催化剂的光催化性能.与后处理浸渍法制备的光催化剂相比,本文制备的TiO2/SBA-15光催化剂表现出了更加优越的光催化性能.     

嫁接法制备Ni/SBA-15催化剂的催化氯苯加氢脱氯

SBA-15表面经嫁接方式引入氨基官能团,与Ni络合制备了SBA-15负载的Ni催化剂(Ni/SBA-15N)。同时,采用传统的浸渍法制备了具有相似Ni负载量的催化剂(Ni/SBA-15)。在负载量相近条件下,Ni/SBA-15N的Ni颗粒分散性均高于Ni/SBA-15。XRD和TPR结果表明,催化剂焙烧后,在氨化SBA-15表面,Ni以硅酸镍形式存在,而在SBA-15表面,Ni以NiO形式存在。Ni/SBA-15对氯苯催化加氢脱氯活性不随Ni负载量的变化而变化;而在Ni/SBA-15N中,Ni负载量增加,催化剂活性增加。     

Immobilization of human carbonic anhydrase on gold nanoparticles assembled onto amine/thiol-functionalized mesoporous SBA-15 for biomimetic sequestration of CO2

A biocatalyst was synthesized by immobilizing human carbonic anhydrase onto gold nanoparticles assembled over amine/thiol-functionalized mesoporous SBA-15. The physicochemical properties of the functionalized mesoporous SBA-15 were obtained by XRD, BET, FE SEM, HR TEM, EDS, and zeta potential analysis. The biocatalytic performance was studied for para-nitrophenyl acetate (p-NPA) hydrolysis. The kinetic parameters K(m) were found to be 22.35 and 27.75 mM, and K(cat)/K(m) values were 1514.09 and 1612.25 M(-1) s(-1) for HCA immobilized on gold nanoparticles assembled on amine/thiol-functionalized mesoporous SBA-15 (HCA/Au/APTES/SBA-15 and HCA/Au/MPTES/SBA-15), respectively. These HCA/Au/APTES/SBA-15 and HCA/Au/MPTES/SBA-15 were investigated for biocatalytic hydration of CO(2) and its precipitation as CaCO(3). The amount of CaCO(3) precipitated over HCA/Au/MPTES/SBA-15 was nearly the same as that precipitated over free HCA. Storage stability and reusability studies suggested that HCA/Au/MPTES/SBA-15 retained its activity even after 20 days storage at 25 °C and 20 recycling runs. The present results demonstrate that HCA/Au/MPTES/SBA-15 and HCA/Au/APTES/SBA-15 are highly efficient potential nanobiocatalysts for industrial-scale CO(2) sequestration.     

Mesoporous hybrids containing Eu complexes covalently bonded to SBA-15 functionalized: Assembly, characterization and photoluminescence

A novel series of luminescent mesoporous organic-inorganic hybrid materials has been prepared by linking Eu³⁺ complexes to the functionalized ordered mesoporous SBA-15 which was synthesis by a co-condensation process of 1,3-diphenyl-1,3-propanepione (DBM) modified by the coupling agent 3-(triethoxysilyl)-propyl isocyanate (TEPIC), tetraethoxysilane (TEOS), Pluronic P123 surfactant as a template. It was demonstrated that the efficient intramolecular energy transfer in the mesoporous material Eu(DBMSi-SBA-15)₃phen mainly occurred between the modified DBM (named as DBM-Si) and the central Eu³⁺ ion. So the Eu(DBMSi-SBA-15)₃phen showed characteristic emission of Eu³⁺ ion under UV irradiation with higher luminescence quantum efficiency. Moreover, the mesoporous hybrid materials exhibited excellent thermal stability as the lanthanide complex was covalently bonded to the mesoporous matrix.     

Ion-exchange properties of imidazolium-grafted SBA-15 toward AuCl4(-) anions and their conversion into supported gold nanoparticles

Imidazolium groups were successfully prepared and grafted on the surface of SBA-15 mesoporous silica. The ion-exchange properties of the functionalized porous solid (SBA-15/R(+)Cl(-)) toward AuCl(4)(-) anions were evaluated through an ion-exchange isotherm. The calculated values of the equilibrium constant (log β = 4.47) and the effective ion-exchange capacity (t(Q) = 0.79 mmol g(-1)) indicate that the AuCl(4)(-) species can be loaded and strongly retained on the functionalized surface as counterions of the imidazolium groups. Subsequently, solids containing different amounts of AuCl(4)(-) ions were submitted to a chemical reduction process with NaBH(4), converting the anionic gold species into supported gold nanoparticles. The plasmon resonance bands, the X-ray diffraction patterns, and transmission electron microscopy images of the supported gold nanoparticles before and after thermal treatment at 973 K indicate that the metal nanostructures are highly dispersed and stabilized by the host environment.