Effect of phenol on the aggregation characteristics of an ethylene oxide-propylene oxide triblock copolymer P65 in aqueous solution

The effects of phenol on the micellization, micellar growth, and phase separation of a poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) amphiphilic copolymer (Pluronic P65: EO19 PO30 EO19) in aqueous solution have been studied by cloud point, viscosity, dynamic light scattering (DLS), differential scanning calorimetry (DSC), fluorescence spectroscopy, and small-angle neutron scattering (SANS). Various concentrations of P65 have been chosen to estimate the effect of phenol on different concentration regions of P65. Phenol interacts quite differently at low concentrations (0-2%) than at high concentrations (2-10%) of P65, as per the observation that phenol is more predominant at smaller concentrations of P65. A marked decrease in the cloud points of the P65 solutions is observed in presence of phenol. The critical micelle temperature (CMT) of P65 shows a synergistic effect of phenol on P65 aggregates. Micellar transitions, phase separation, and aggregation behaviours like micellization and micellar growth in the presence of phenol have been observed by combining viscometry, DLS, DSC, and CP. DLS shows that the effect of phenol is predominant at high temperatures. SANS shows a high increase in axial ratio and aggregation numbers in the presence of phenol at fixed concentrations of P65. Fluorescence data illustrate that addition of phenol makes micelles polar but at the same time its favours aggregation. Water-soluble phenol (present in low concentrations) forms aggregates with P65, which can be separated by cloud point extraction, making this study interesting for separation of phenol from the phenol-water system.     

Aggregation Behavior of Pluronic-L64 in Presence of Sodium Dodecyl Sulphate in Water

The effect of sodium dodecyl sulfate (SDS) on the micellization and aggregation behavior of a poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) amphiphilic copolymer (Pluronic L64: EO₁₃ PO₃₀ EO₁₃) have been investigated by various techniques like, cloud point, viscosity, isothermal titration calorimetry (ITC), differential scanning calorimetry (DSC), fluorescence spectroscopy, room temperature phosphorescence (RTP), and small angle neutron scattering (SANS). Addition of SDS in L64 solutions shows mark alteration of different properties. We observed synergistic interaction between SDS and Pluronic L64. The changes in the critical micelle concentration (CMC), critical micelle temperature (CMT), cloud point (CP), micelle size, and shape has been correlated and reported in terms of structure dynamics and mechanics. The ITC titrations have been used to explore the different stages of binding and interactions of SDS with L64. The enthalpies of aggregation for copolymer-SDS aggregates binding, organizational change of bound aggregates, and the threshold concentrations of SDS in the presence of copolymer were estimated directly from ITC titration curves. The effect of temperature on enthalpy values has been reported in terms of different aggregation state. Fluorescence and RTP for L64 were used to investigate the change in micellar environment on the addition of SDS at different temperature. Appearance and shifting of SANS peaks have been used to monitor the size and inter micellar interaction on addition of SDS in L64 solution. Cloud point and viscosity elaborate the penetration of SDS molecule in L64 micelle and hence changing the micellar architect.     

Salt‐Induced Micellization of Pluronic F88 in Water

The effect of potassium chloride on the micellization of a poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (PEO‐PPO‐PEO) triblock copolymer (Pluronic F88: EO₁₀₃PO₃₉EO₁₀₃.) in water was studied by fluorescence, FTIR, ¹H NMR, dynamic light scattering, and dye solubilization. The critical micellization temperature (CMT) values of the copolymer decreased with an increase of KCl concentration while micellar core gets progressively dehydrated. The results reveal the leading role of salt‐water interaction in promoting the micellization of PEO‐PPO‐PEO copolymer by the addition of salt. No significant micellar growth was seen even at temperatures close to cloud point.     

Effect of hydrotropes on the solution behavior of PEO/PPO/PEO block copolymer L62 in aqueous solutions

Effect of hydrotropes viz. sodium benzene sulfonate (NaBS), sodium toluene sulfonate (NaTS) and sodium xylene sulfonate (NaXS) on the micellization, phase behavior and structure of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer L62 in aqueous solution was studied by surface tension, dye spectral, cloud point and small angle neutron scattering measurements. The addition of hydrotropes increased the critical micelle concentration (CMC) of L62 which appears to be logistic as the added hydrotrope enhances the solubility of PPO moiety (and PEO) making it behave like a more hydrophilic block copolymer that would micellize at high copolymer concentration. Partial phase diagram of L62 in water shows two cloud point (CP) in the concentration range (0-10 wt.%). Addition of hydrotropes shifts the L62 concentration range showing double cloud points at lower side of concentration; sodium xylene sulfonate (NaXS) being more effective. SANS data for L62 in the presence of 0.4 and 0.8 M NaXS at temperatures <30 °C showed unimers which are fully dissolved Gaussian chains. The unimer-to-micelle transition takes place when temperature is increased. It is found that SANS data for L62 in the presence of 0.4 M NaXS (40 and 50 °C) and 0.8 M NaXS (45 and 50 °C) correspond to ellipsoidal structure of micelles.     

Salt induced micellization of very hydrophilic PEO-PPO-PEO block copolymers in aqueous solutions

Symmetrical poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), PEO-PPO-PEO, triblock copolymers with 80% polyethylene oxide (PEO, the hydrophilic end blocks) and polypropylene oxide (PPO, the hydrophobic middle block) usually remain as molecularly dissolved at ambient temperature even at fairly high-concentrations (2 wt.% or more). However, the micellization is induced at lower concentration/temperature in the presence of salts. The results on salt induced micellization from four such hydrophilic copolymers Pluronic^® F38, F68, F88 and F108 obtained from several independent techniques are described. FTIR and fluorescence results provide essentially identical critical micelle temperatures (CMTs) showing marked decrease with increase in PPO molecular weight and in the presence of salt. These copolymers were weakly surface active and did not show a clear break point in surface tension concentration plot typical of surfactants. While addition of salt decreases the cloud point, no significant micelle growth was observed even at temperature close to cloud point (CP). Marked increased in solubilization of an oil dye was observed in presence of KCl. Different methods showed good agreement in temperature/salt-induced micellization of these hydrophilic copolymers.     

New biodegradable amphiphilic block copolymers of epsilon-caprolactone and delta-valerolactone catalyzed by novel aluminum metal complexes. II. Micellization and solution to gel transition

In our previous study [J. Yang, L. Jia, L. Yin, J. Yu, Z. Shi, Q. Fang, A. Cao, Macromol. Biosci. 2004, 4, 1092.], new biodegradable copolymers of diblock methoxy poly(ethylene glycol)-block-poly(epsilon-caprolactone) and methoxy poly(ethylene glycol)-block-poly(delta-valerolactone), and triblock poly(epsilon-caprolactone)-block-poly(ethylene glycol)-block-poly(epsilon-caprolactone) and poly(delta-valerolactone)-block-poly(ethylene glycol)-block-poly(delta-valero-lactone) bearing narrow molecular weight distributions and well-defined block architectures were reported to be prepared with our original aluminum metal complex templates. This work will continue to report new investigations on their water solubility, and reversible thermal responsive micellization and solution to gel transition in distilled water. Among the new synthesized copolymers (P1-P23), seven diblock or triblock samples (P3, P6, P7, P11, P12, P19, and P21) with higher hydrophilic building block populations were revealed to be water soluble under ambient temperature. By means of UV spectrophotometer attached with a thermostat, important parameters as critical micellization mass concentrations (CMCs) and critical micellization temperatures (CMTs) were characterized for these new amphiphile dilute aqueous solution with the aid of an lipophilic organic dye probe of 1,6-diphenyl-1,3,5-hexatriene (DPH). Furthermore, the critical gelation temperatures (CGTs) were simultaneously investigated for these water-soluble block copolymers via a tube tilting method. It was found that the CMC, CMT, and CGT were strongly affected by the population and nature of the hydrophobic building blocks, and a higher hydrophobicity of the new amphiphilic block copolymer finally led to lower CMC and CMT, and higher CGT. In addition, the salts of KBr and NaCl were found to play as a salt-out effect on the solution to gel transition for the diblock P6 and triblock P11, exhibiting an interesting tunable gelation temperature close to 35-42 degrees C. These results will pave new possibility for the synthesized block structural amphiphiles as potential biomaterials to be applied in vivo.     

Micellar Behavior of Polystyrene-Poly(Ethylene Oxide) Diblock Copolymers in Aqueous Media: Effect of Copolymer Composition,Temperature, Salt,and Surfactants

Formation and structure of micelles from two amphiphilic polystyrene-block-poly(ethylene oxide) (PS-PEO) diblock copolymers (PS mol.wt. 1000; PEO mol.wt. 3000 and 5000) were examined by surface tension, viscosity, steady state fluorescence, dynamic light scattering (DLS), small angle neutron scattering (SANS), and cryo-transmission electron microscopy (cryo-TEM). The critical micelle concentration (CMC) of the copolymers in aqueous solution was ca. 0.05%; micelle hydrodynamic diameter was 30–35 nm with a narrow size distribution. SANS studies show that the copolymers form ellipsoidal micelles with semi major axis ～23 nm and semi minor axis ～8 nm. No significant change in the structure was found with temperature and presence of salt. The copolymer micelles interaction with the ionic surfactants sodium dodecyl sulphate (SDS) and dodecyltrimethylammonium bromide (DTAB) was also examined by DLS and SANS.     

Micellization and solubilization of a model hydrophobic drug nimesulide in aqueous salt solutions of Tetronic T904

The micellar and phase behavior of an ethylene oxide-propylene oxide branched octablock copolymer Tetronic T 904 (hereafter written as T904) in water and NaCl solutions was examined. The copolymer shows a cloud point (CP) ranging from 74-65°C in the concentration range of 1-10% and forms aggregates (micelles) with a hydrodynamic diameter around 10-12nm in the temperature range 30-40°C. Stable, bluish solutions containing aggregates of variable size (several hundred nm in some cases) were observed even at temperatures much less than the critical micellization temperature (CMT=30°C for a 2% solution in water). The CP and the CMT markedly decrease in the presence of NaCl due to the dehydration of the polyethylene oxide shell. The size of the micelles in water or salt solutions increases at temperatures close to the CP as inferred from viscosity measurments. A model drug compound (nimesulide, NIM) was solubilized in T904 micelles which showed a remarkable increase in solubilization at higher temperature; however, a decrease in solubilization was observed in salt solutions. The thermodynamic parameters for solubilization were obtained, and the location of NIM in the copolymer micelles was investigated by UV-Visible spectroscopy.     

Formation of block copolymer micelles in solutions of a linear homopolymer in a good solvent

The existence of micelles of polystyrene-block-poly(ethylene/propene) in solutions of polystyrene in toluene was investigated. Toluene is a good solvent of both copolymer blocks whereas polystyrene and poly(ethylene/propene) are immiscible polymers. The presence of homopolystyrene at high enough concentration can induce the micellization of polystyrene-block-poly(ethylene/propene) in solution of a good solvent such as toluene. The thermodynamics of this new micelle system at a given polystyrene concentration was studied. Light scattering measurements were carried out in order to determine the critical micelle temperature (CMT) of different micellar solutions. Standard Gibbs energy, enthalpy and entropy of micellization were estimated from CMT and concentration data. The numerical values found were less negative than those found for micelle systems consisting in a block copolymer dissolved in a single selective solvent.     

Effect of acid on the aggregation of poly(ethylene xide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers

The acid effect on the aggregation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers EO(20)PO(70)EO(20) has been investigated by transmission electron microscopy (TEM), particle size analyzer (PSA), Fourier transformed infrared, and fluorescence spectroscopy. The critical micellization temperature for Pluronic P123 in different HCl aqueous solutions increases with the increase of acid concentration. Additionally, the hydrolysis degradation of PEO blocks is observed in strong acid concentrations at higher temperatures. When the acid concentration is low, TEM and PSA show the increase of the micelle mean diameter and the decrease of the micelle polydispersity at room temperature, which demonstrate the extension of EO corona and tendency of uniform micelle size because of the charge repulsion. When under strong acid conditions, the aggregation of micelles through the protonated water bridges was observed.     

Mixed micellization between natural and synthetic block copolymers: β-casein and Lutrol F-127

Amphiphilic block copolymers and mixtures of amphiphiles find broad applications in numerous technologies, including pharma, food, cosmetic and detergency. Here we report on the interactions between a biological charged diblock copolymer, β-casein, and a synthetic uncharged triblock copolymer, Lutrol F-127 (EO(101)PO(56)EO(101)), on their mixed micellization characteristics and the micelles' structure and morphology. Isothermal titration calorimetry (ITC) experiments indicate that mixed micelles form when Lutrol is added to monomeric as well as to assembled β-casein. The main driving force for the mixed micellization is the hydrophobic interactions. Above β-casein CMC, strong perturbations caused by penetration of the hydrophobic oxypropylene sections of Lutrol into the protein micellar core lead to disintegration of the micelles and reformation of mixed Lutrol/β-casein micelles. The negative enthalpy of micelle formation (ΔH) and cooperativity increase with raising β-casein concentration in solution. ζ-potential measurements show that Lutrol interacts with the protein micelles to form mixed micelles even below its critical micellization temperature (CMT). They further indicate that Lutrol effectively masks the protein charges, probably by forming a coating layer of the ethyleneoxide rich chains. Small-angle X-ray scattering (SAXS) and cryogenic-transmission electron microscopy (cryo-TEM) indicate relatively small changes in the oblate micellar shape, but do show swelling along the small axis of β-casein micelles in the presence of Lutrol, thereby confirming the formation of mixed micelles.     

Self-consistent-field analysis of the micellization of carboxy-modified poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymers

The micellization properties of carboxy-modified Pluronics P85 (poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers) are investigated by means of a molecularly realistic self-consistent-field theory. We consider the, so-called, carboxylic acid end-standing P85 (CAE-85) case where the carboxylic group is located at the end of both PEO parts and the carboxylic acid center-standing P85 (CAC-85) case where each of the carboxylic group presents between the PEO and PPO blocks. The micellization of these copolymers depends on the pH, the added electrolyte concentration phis, and the temperature. It is shown that the aggregation number (Nagg) decreases, whereas the critical micellization concentration (CMC) increases with pH. For the case of increasing phis, the Nagg increases and the CMC decreases. The critical micellization temperature (CMT) and cloud point temperature (CPT) increase with pH at low phis and decrease at increasing phis. The changing from CAE-85 to CAC-85 leads to increasing CMC and CMT, but lower CPT.     

Calorimetric and Scattering Studies on Micellization of Pluronics in Aqueous Solutions: Effect of the Size of Hydrophilic PEO End Blocks,Temperature, and Added Salt

Micellar behavior of five ethylene oxide–propylene oxide (EO–PO) triblock copolymers, called Pluronics, with similar molecular weights of middle block PPO (～2250 g/mol) and varied percentages of poly(ethylene oxide) (10%, 40%, 50%, 70%, and 80%, referred to as L81, P84, P85, F87, and F88, respectively) was examined by thermal (isothermal titration calorimetry and high-sensitivity differential scanning calorimetry), spectral (UV–vis), and dynamic light scattering (DLS) techniques. Micellization was decreased with increasing hydrophilicity of copolymer but induced in the presence of salt. Critical micelle temperatures (CMTs) of copolymers at different concentrations, with and without sodium chloride, are reported. Viscosity and DLS results reveal that highly hydrophilic copolymers (F87 and F88) did not show significant change in micelle size even at temperatures close to cloud point, whereas micelle growth and sphere-to-rod transition occurred for P84 and P85. Surface tension of solutions in water and salt also show enhanced surface activity and salt-induced micellization. The CMTs for different systems using different methods are compared.     

Characterization of Surfactant-Diblock Copolymer Interactions and Its Thermodynamic Studies

The interaction of nonionic diblock copolymer poly(ethylene oxide butylene oxide) (E₆₂B₂₂) with a cationic surfactant cetyl trimethyl ammonium bromide (CTAB) and anionic surfactant sodium dodecyl sulphate (SDS) were studied using surface tension, conductivity, and dynamic laser light scattering techniques. Surface tension measurements were used to determine critical micelle concentration and thereby its free energy of adsorption (ΔG_ads), free energy of micellization (ΔG_m), surface excess concentration (Γ), and minimum area per molecule (A). Conductivity measurements were used to determine critical micelle concentration (CMC) critical aggregation concentration (CAC) at different temperatures, enthalpy of micellization (ΔH_m), free energy of micellization and entropy of micellization (ΔS_m). Changes in physicochemical properties of the micellized block copolymer were studied by using dynamic laser light scattering. The effect of surfactant on the size and properties of block copolymer has also been discussed.     

A calorimetry and light scattering study of the formation and shape transition of mixed micelles of EO20PO68EO20 triblock copolymer (P123) and nonionic surfactant (C12EO6)

The interaction between the nonionic surfactant C12EO6 and the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer EO20PO68EO20 (P123) has been investigated by means of isothermal titration and differential scanning calorimetry (DSC) as well as static and dynamic light scattering (SLS and DLS). P123 self-assembles in water into spherical micelles at ambient temperatures. At raised temperatures, the DSC data revealed a sphere-to-rod transition of the P123 micelles around 60 degrees C. C12EO6 interacts strongly with P123 micelles in aqueous solution to give mixed micelles with a critical micelle concentration (cmc) well below the cmc for pure C12EO6. The presence of C12EO6 also lowers the critical micelle temperature of P123 so aggregation starts at significantly lower temperatures. A new phenomenon was observed in the P123-C12EO6 system, namely, a well-defined sphere-to-rod transition of the mixed micelles. A visual phase study of mixtures containing 1.00 wt % P123 showed that in a narrow concentration range of C12EO6 both the sphere-to-rod transition and the liquid-liquid phase separation temperature are strongly depressed compared to the pure P123-water system. The hydrodynamic radius of spherical mixed micelles at a C12EO6/P123 molar ratio of 2.2 was estimated from DLS to be 9.1 nm, whereas it is 24.1 nm for the rodlike micelles. Furthermore, the hydrodynamic length of the rods at a molar ratio of 2.2 is in the range of 100 nm. The retarded kinetics of the shape transition was detected in titration calorimetric experiments at 40 degrees C and further studied by using time-resolved DLS and SLS. The rate of growth, which was slow (>2000 s), was found to increase with the total concentration.     

Effect of sodium chloride on association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer in aqueous solutions

The effect of sodium chloride (NaCl) upon the thermally induced association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymer, Pluronic P103, has been investigated using pyrene fluorescence spectroscopy. The critical micellization temperature (CMT) of Pluronic P103 in aqueous solution is decreased by the addition of NaCl. The standard enthalpy and entropy of micellization for Pluronic P103 in water are increased in the presence of small amounts of NaCl, but further addition of NaCl decreases the standard enthalpy and entropy of micellization. The I1/I3 ratio of pyrene in aqueous Pluronic P103 solutions at temperature below the CMT decreases with increases of NaCl concentration, which is related to the decrease of PPO solubility. The decrease in polarity of the PPO shifts the CMT toward lower temperature.     

Micelles from PEO-PPO-PEO block copolymers as nanocontainers for solubilization of a poorly water soluble drug hydrochlorothiazide

The effect of molecular characteristics of EO-PO triblock copolymers viz. Pluronic(?) P103 (EO(17)PO(60)PEO(17)), P123 (EO(19)PO(69)EO(19)), and F127 (EO(100)PO(65)EO(100)) on micellar behavior and solubilization of a diuretic drug, hydrochlorothiazide (HCT) was investigated. The critical micellization temperatures (CMTs) and size for empty as well as drug loaded micelles are reported. The CMTs and micelle size depended on the hydrophobicity and molecular weight of the copolymer; a decrease in CMT and increase in size was observed on solubilization. The solubilization of the drug hydrochlorothiazide (HCT) in the block copolymer nanoaggregates at different temperatures (28, 37, 45°C), pH (3.7, 5.0, 6.7) and in the presence of added salt (NaCl) was monitored by using UV-vis spectroscopy and solubility data were used to calculate the solubilization characteristics; micelle-water partition coefficient (P) and thermodynamic parameters of solubilization viz. Gibbs free energy (ΔG(s)°), enthalpy (ΔH(s)°) and entropy (ΔS(s)°). The solubility of the drug in copolymer increases with the trend: P103>P123>F127. The solubilized drug decreased the cloud point (CP) of copolymers. Results show that the drug solubility increases in the presence of salt but significantly enhances with the increase in the temperature and at a lower pH in which drug remains in the non-ionized form.     

Ultrafast infrared heating laser pulse-induced micellization kinetics of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) in water

The heating-induced micellization of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (Pluronic PE10300) triblock copolymer chains was studied by ultrasensitive differential scanning calorimetry, laser light scattering, and fluorescence spectrometry with a fluorescent probe, 8-anilino-1-naphthalenesulfonic acid ammonium salt. The critical micellization temperatures obtained from the three methods are similar. The micellization kinetics was studied in terms of changes in the fluorescence and Rayleigh scattering intensities after an ultrafast infrared heating laser pulse (approximately 10 ns)-induced temperature jump. The increases in the fluorescence and Rayleigh scattering intensities in the millisecond range can be well described by a single-exponential equation, corresponding to the incorporation of individual triblock copolymer chains (unimers) into large spherical micelles. The increase in copolymer concentration or the initial solution temperature decreases the characteristic transition time. In general, the fluorescence measurement has a better signal-to-noise ratio but leads to a transition time that is slightly shorter than that from the corresponding Rayleigh scattering measurement for a given copolymer solution.     

Salt-induced micellization of a triblock copolymer in aqueous solution: a 1H nuclear magnetic resonance spectroscopy study

An aqueous micellar solution of a PEO-PPO-PEO triblock copolymer, pluronic F88 (EO103PO39EO103), in the presence of salt (KCl) has been investigated by 1H NMR spectroscopy. The hydrogen-bonding structure in water is directly changed by the strong polarization effect of added salt, which indirectly weakens the interaction of polymer molecules with water. Both EO and PO blocks are dehydrated by the addition of salt in a similar way, whereas the solubility of the PO blocks may be affected in a more pronounced way, which results in the decrease of the critical micellization temperature (CMT). It is found that the addition of salt favors a more compact micellar core, where the water content is decreased and an effective PO-PO interaction is increased. Increasing the salt concentration would result in a decrease in the number of gauche conformers in the PPO chain, which may be the deeper reason for the decreasing solubility of PPO segments in aqueous salt solution. The temperature region over which the micellization occurs is broad, indicating that micelles and unimers coexist over an extended temperature range, whereas this transition region is significantly narrowed by the addition of salt. The addition of salt offers a good substitute way of changing the temperature to induce micellization. The critical micellization salt concentration (CMSC) is determined to be 1.0 mol l-1 for KCl in 2.5% aqueous pluronic F88 solution at 25 degrees C, and the transition region in which both free and associated copolymer molecules coexist is defined to range from 1 to 2 mol L-1.