Formation,structure, composition,and catalytic properties of Ni-, Cu-, Mn-, Fe-, and co-containing films on aluminum

Layers containing oxygen compounds of copper and nickel and(or) of one of transition metals (manganese, cobalt, iron) were formed on an aluminum alloy by the plasma-electrolytic oxidation method. The layers were characterized by means of X-ray phase analysis, X-ray fluorescence microanalysis, and scanning electron microscopy and tested in the reaction of CO oxidation to CO₂.     

Reactions of water, dihydrogen, dinitrogen, dinitrogen oxide, methane over illuminated ultraclean graphite

Some photocatalytic reactions of different gases on ultraclean graphite have been studied by means of quadrupole mass spectrometry. With water vapor, dihydrogen, dinitrogen and dinitrogen oxide, the UV-illuminated graphite acts as a reducing agent. TPD measurements indicate that photocatalytic processes are strongly affected by adsorption-desorption equilibria.     

Sorption of methane,ethane, propane,butane, carbon dioxide,and nitrogen on kerogen

Sorption isotherms of nitrogen, methane (in the pressure range of 0.1–40 MPa), ethane (0.1–3.7MPa), propane (0.01–1 MPa), butane (0.01–0.2 MPa), and carbon dioxide (0.1–6 MPa) are measured on two adsorbents with kerogen contents of 16 and 75% at temperatures of 303, 323, 343 K. Adsorption volumes are calculated for all adsorption systems using two independent methods. The BET technique is used to determine the surface area values of the two adsorbents on the basis of sorption data for ethane, propane, butane, and carbon dioxide. The initial and isosteric adheat of sorption values are calculated on the basis of sorption isotherms of ethane, propane, butane, carbon dioxide measured at three temperatures. It is found from comparing the dependences of isosteric heat of sorption on the two adsorbents that molecules of the above gases diffuse into its bulk (adsorbent 2) in addition to sorbing on the outside surface formed by kerogen molecules, while sorption of the same gases on the rock (adsorbent 1) is similar to sorption on a smooth hard adsorbent surface.     

Radiation Chemical Studies of Protein Reactions: Effect of Amino Acids,Proteins, Vitamins,Chelating Agents,S-Containing Compounds,and Temperature on Viscosity

Amino acids, proteins, vitamins, chelating agents, and S-containing compounds were found to protect the shape of the external envelope of the protein molecule from radiation damage. The behavior of the viscosity change closely resembles that found with sodium glutamate and sodium benzoate, as shown by a similar dependence on the concentration. Protein irradiated by γ-rays showed the effect of temperature on changes in the shape of the external envelope of the protein molecule. The behavior of the viscosity change was studied.     

Tertiary Acetylenic Alcohols,Ethers, and Esters on the Basis of Isocamphanone,Camphor, Fenchone,Isofenchone, and Adamanthanone

Acetylenic lithium alcoholates were synthesized by reactions of 1-hexyne, 1-octyne, and phenylacetylene with butyllithium with subsequent reaction of the resulting acetylides with isocamphanone, (±)-camphor, (+)-fenchone, isofenchone, and adamanthanone. The latter reaction is controlled by steric factors. Lithium alcoholates were used to synthesize the corresponding alcohols, ethers, and esters. Configurational assessment of the products was performed on the basis of quantum-chemical calculations and X-ray diffraction analysis.     

Interaction of immunoglobulin G with N,N,N',N'-ethylenediaminetetramethylenephosphonic acid-modified zirconia

Zirconia beads (25-38 microm in diameter) were modified with N,N,N'.N'-ethylenediaminetetramethylenephosphonic acid to generate a pseudo-biospecific support, r_PEZ. To better understand the force of interaction between the IgG and the r_PEZ, the equilibrium dissociation constant (Kd) was determined by static binding isotherms, as a function of temperature and by frontal analysis at different linear velocities. Temperature had no significant impact on the maximum static binding capacity (Q(max)) and the equilibrium-binding constant (Kd), whereas pH and the salt concentration had a noticeable impact on both Q(max) and Kd values. Q(max) was found to be in the range of 55-65 mg IgG per ml of beads and unaffected by temperature. The maximum dynamic binding capacity (Qx) was found to be in the range of 20-12 mg IgG per ml of beads. The adsorption rate constant (ka) was determined by a split-peak approach to be between 982 and 32421 mol(-1) s(-1) depending on the linear velocity. Adsorption rate of IgG on r_PEZ was studied as a function of both feed concentration and linear velocity. The standard enthalpy and entropy values were estimated for the interaction of IgG with this novel support. The binding constants were also determined by modeling the batch protein-uptake data.     

5,12-环氧-1,2,3,4,5,12-六氢-2-并四苯基甲基酮的合成研究

蒽环类抗生素是近年来颇受人们注意的抗肿瘤药物。其配糖体蒽环酮的化学合成也引起了有机化学工作者极大的兴趣。本工作报道了蒽环酮的重要前体——b,12-环氧-1,2,3,4,5,12-六氢-2-并四苯基甲基酮(1)的合成。 1是以2,3,5,6-四甲     

Generation of germyl,stannyl, and plumbyl anions through nucleophilic cleavage of digermanes,distannanes, and diplumbanes

Nucleophilic cleavage by potassium t-butoxide on hexaphenyl digermanes, distannanes, and diplumbanes, in N,N′-dimethylpropyleneurea (DMPU) solvent, provides a facile method for preparation of triphenyl germyl, stannyl, and plumbyl anions.     

Electroreduction of aromatic oximes: diprotonation, adsorption, imine formation, and substituent effects

Aromatic oximes are reduced in aqueous solution in a four-electron process. The reducible species in the pH range 5-8 is a diprotonated form of the oxime. This species is generated in the course of electrolysis in the vicinity of the electrode surface from the adsorbed neutral form of the oxime. The reduction is initiated by a cleavage of the N-O bond. The diprotonation facilitates the reduction process by the preformation of OH2+ as a good leaving group and by a positive charge on the azomethine nitrogen. Diprotonation has been proven based on shapes of i = f(pH) plots, by observed shifts of half-wave potentials with pH and by comparison with the reduction of nitrones. Some observed deviations from theoretical i = f(pH) plots were attributed to the role of adsorption on the rate of protonation. Adsorption is also responsible for dips on some of the i-E curves. Adsorption plays a role at concentrations as low as 1 x 10(-5) M, when the electrode surface is still not fully covered. This indicates that catalyzed protonation occurs on islets of adsorbed materials. At pH 2-5 the studied oximes in the vicinity of the electrode are predominately present in a protonated form, which is less strongly adsorbed. In this pH range the protonation takes place in a homogeneous reaction layer of the electrode. It yields a monoprotonated form, which is reduced. The separation of two two-electron waves observed for some oximes in acidic media serves as an experimental proof of the formation of imines as reduction intermediates. This separation is caused by the differences in pKa values of protonated forms of oximes and imines. The effects of substituents in the para position on the benzene ring are characterized by correlation with the Hammett substituent constant sigmax. This has been proven at pH 1.5 for substituted benzaldehyde oximes and at pH 5.0 for substituted acetophenone oximes.     

Simultaneous microdetermination of carbon,hydrogen, mercury,chlorine, bromine and sulphur in organic compounds

A simple, reliable method for the simultaneous microdetermination of carbon, hydrogen, mercury, chlorine (or bromine) and sulphur in organic compounds is described. The intermediate storage technique is used. Sulphur and the halogens are absorbed on electrolytic silver and determined gravimetrically or titrimetrically. Mercury is absorbed on gold wire, and is weighed as the metal or desorbed and determined by a mercury-8-hydroxy-quinoline method.     

Sorption of radiocobalt(II) onto MWCNTs: effects of solid content, contact time, pH, ionic strength, humic acid and temperature

Multiwalled carbon nanotubes (MWCNTs) have attracted intense multidisciplinary study because of their special physicochemical properties. In this paper, the effect of solid content, contact time, pH, temperature and humic acid on radionuclide (⁶⁰Co(II)) on MWCNTs was studied by using batch technique. The results indicate that the sorption of Co(II) on MWCNTs can achieve sorption equilibration in short time and the kinetic sorption can be described by pseudo-second-order model well. The sorption of Co(II) on MWCNTs is strongly dependent on pH and independent of ionic strength, suggesting that the sorption of Co(II) on MWCNTs is mainly dominated by inner-sphere surface complexation rather than by outer-sphere surface complexation or ion exchange. The thermodynamic parameters calculated from the temperature-dependent sorption isotherms indicate that the sorption of Co(II) on MWCNTs was an endothermic and spontaneous process. The results of high sorption capacity of Co(II) suggest that MWCNTs can be used as efficient materials for the preconcentration of radiocobalt from large volumes of aqueous solutions in radionuclide polluted water.     

Simultaneous microdetermination of carbon, hydrogen, chlorine, bromine, sulfur, and metals in organometallic compounds

A method for the simultaneous microdetermination of carbon, hydrogen, chlorine, bromine, sulfur, and metals which combines features of the known intermediate storage technique in organic microanalysis and formation of the metal-oxine complex, is described. Carbon and hydrogen are determined gravimetrically as usual. Sulfur and halogens are absorbed and stored on electrolytic silver. After completion of the combustion, the oxygen is replaced first by nitrogen and secondly by hydrogen which liberates the sulfur as sulfur dioxide and halogens as hydrogen halides and regenerates the silver layer. The liberated gases can be easily absorbed by dilute hydrogen peroxide and determined titrimetrically. The metal oxide, remaining in the platinum boat, is dissolved in a mixture of nitric-perchloric acids in a test tube and the metal content is determined gravimetrically and titrimetrically using 8-hydroxyquinoline.     

Tricalysionoside A, a megastigmane gentiobioside, sulfatricalysines A-F, and tricalysiosides X-Z, ent-kaurane glucosides, from the leaves of Tricalysia dubia

Further isolation work on the water-soluble fraction of a MeOH extract of Tricalysia dubia afforded one new megastigmane gentiobioside, named tricalysionoside A (1), and three sulfates, named sulfatricalysines A-C (2-4). Extensive isolation work on the 1-BuOH-soluble fraction of a MeOH extract of T. dubia yielded sulfatricalysines D-F (5-7) and three new ent-kaurane glucosides, named tricalysiosides X-Z (8-10). The structures of the new compounds were elucidated by analyses of one- and two-dimensional NMR spectroscopic data. The absolute stereochemistry of tricalysionoside A (1) was established by modified Mosher's method.     

Electrothermal atomic absorption determination of arsenic, antimony, bismuth, manganese, nickel, selenium, tellurium, and chromium in pure copper

Summary Traces of As, Bi, Cr, Mn, Ni, Sb, Se and Te in pure copper were determined by means of electrothermal atomic absorption spectrometry using continuum source background correction and computer signal processing. The effect of the copper matrix on the atomic absorption signals close to the noise level and on sensitivity are studied. The limits of detection were determined in the presence of 50 g of copper.

---

Elektrothermische Atomabsorptionsbestimmung von Spuren Arsen, Antimon, Bismut, Mangan, Nickel, Selen, Tellur und Chrom in reinem Kupfer

     

X-ray fluorescence determination of As, Bi, Co, Cu, Fe, Ni, Pb, Se, V and Zn in natural water and soil extracts after preconcentration of their pyrrolidinedithiocarbamates on cellulose filters

A simple method for the elements preconcentration on thin-layer paraffin-treated cellulose filters was proposed. It was found that pyrrolydinedithiocarbamates of As(III), Bi, Cd, Co, Cu, Fe(III), Ni, Pb, Se(IV), V(V) and Zn obtained after mixing of sample (3-5 ml min⁻¹) and reagent (0.7-1.0 ml min⁻¹) streams were quantitatively recovered from 100 ml sample. The sample acidity was adjusted to pH 4.8-5.2 for preconcentration of Cd, Co, Cu, Fe(III), Ni, Pb, V(V) and Zn, and to 2 M HCl for preconcentration of As, Bi and Se. The optimum reagent concentration was found to be 0.1%. The elements were determined on the filters by X-ray fluorescence spectrometry. The detection limits achieved were 0.1-4.0 μg of element on the filter. Relative standard deviation (R.S.D.) was not higher than 0.08 while determining 5-50 μg of elements on filter. Accuracy and precision of the technique proposed were evaluated by the analysis of spiked natural samples.     

Separation of different valency states of iron,arsenic, antimony,mercury, tin and chromium by thin-layer chromatography

Summary Different valency states of iron, mercury, tin, arsenic, antimony and chromium were separated by the thin-layer chromatography on starch and cellulose, using nine different solvent systems.     

Electrochemical synthesis,properties, and structure of copper,nickel, and cobalt complexes of tridentate tosylamino-functionalized mercaptopyrazole Schiff base

Copper, nickel, and cobalt complexes of the N,N,S-tridentate tosylamino-functionalized mercaptopyrazole Schiff base were obtained by an electrochemical method. The structure and composition of the metal chelates were characterized by C, H, N elemental analysis data and IR and ¹H NMR spectroscopy. More data on the structures of the complexes were obtained by magnetochemical and X-ray absorption spectroscopy measurements. The mononuclear structure of the copper(II) complex was confirmed by X-ray diffraction (CIF file CCDC no. 1473320).     

Synthesis of diazadibenzoperylenes and characterization of their structural, optical, redox, and coordination properties

Tetraphenoxy-substituted diazadibenzoperylenes 5a,b were synthesized from tetrachloroperylene tetracarboxylic acid bisanhydride 1 through imidization with benzylamine, nucleophilic displacement of the four chlorine atoms by phenolates, carbonyl group reduction by LiAlH(4)/AlCl(3), and subsequent Pd/C-promoted debenzylation-dehydrogenation. The structural properties of these extended diazaarenes are discussed on the basis of a X-ray crystal structure of the N,N'-dibutylated diazadibenzoperylenium dication 6, which revealed a 25 degrees twist of the central six-membered ring leading to an atropisomeric pi-conjugated backbone. The chromophoric systems of 5 and 6 were characterized by optical absorption and fluorescence spectroscopy, which revealed an intense fluorescence with a quantum yield of 75% for 5 and 50% for 6. Cyclic voltammetry showed reversible oxidation and reduction waves for 6, whereas the oxidation of 5 afforded the irreversible deposition of a conductive film on the electrode surface. Finally, the potential use of ligands 5 in supramolecular chemistry has been evaluated by complexation experiments with carboxylic acids and zinc tetraphenylporphyrin (ZnTPP).     

Synthesis of clausenin, xanthoxyletin, alloxanthoxyletin, xanthyletin and nor-dalbergin

The synthesis of clausenin is reported. Clausenin on methylation, NaBH₄ reduction and dehydration of the secondary alcohol gives xanthoxyletin. The angular isomer of clausenin by a similar series of reactions gives alloxanthoxyletin. A convenient synthesis of xanthyletin and nor-dalbergin has also been achieved.     

Comparison of partial digestion procedures for determination of Ca, Cr, Cu, Fe, K, Mg, Mn, Na, P, and Zn in milk by inductively coupled plasma-optical emission spectrometry

A fast procedure was developed for determination of Ca, Cr, Cu, Fe, K, Mg, Mn, Na, P, and Zn in milk samples. This procedure consisted of a partial digestion with hydrochloric acid on a hot plate. The results obtained were compared with 3 other digestion procedures (dry ashing and 2 microwave digestions). All the procedures showed similar precision levels, with coefficients of variation <10% for most analyzed elements. Accuracy was evaluated by using certified reference materials, and the values obtained were within the confidence intervals for these products. The results obtained were not considered statistically different. The partial digestion on a hot plate with HCl can be very practical for laboratories with relatively large numbers of sample analyses.