共查询到20条相似文献,搜索用时 15 毫秒
1.
The use of an unmodified native sheep wool packed minicolumn for the online preconcentration of Hg(II) and methyl mercury species prior to the determination of mercury by atomic fluorescence spectrometry was investigated. Experimental conditions, such as pH, desorbing agents, volume of solution were optimized. 0.5M thioglycolic acid was found to be a successful eluting agent for both mercury species. Breakthrough and total capacities were determined. The method is simple and rapidly applicable for the determination of Hg(II) and methyl mercury in tap water. The accuracy of the method was examined by the analysis of a peach leaves standard reference material. Recoveries of spiked mercury species in tap water were 105.8% for Hg(II) and 98.8% for methyl mercury. 相似文献
2.
Meilin Wang Ganquan Huang Shahua Qian Jianshen Jiang Yuting Wan Y. K. Chau 《Analytical and bioanalytical chemistry》1997,358(7-8):856-858
A novel crosslinked chitosan (CCTS) has been synthesized by the reaction of water-soluble chitosan with epoxy chloropropane. In the presence of the chelating EDTA and in the pH range between 4–10, CCTS selectively adsorbed trace inorganic Hg in water samples with enrichment factors of 100. Inorganic Hg could be directly reduced using KBH4 without preceding elution and determined by CVAAS. Accordingly, the total mercury could be determined after all species of mercury in water samples were transformed into Hg2+. The detection limit (3σ) for mercury was 12 ng L–1 and the relative standard deviation less than 5% at the 50 ng L–1 level. Beer’s law was obeyed over the range 30–400 ng L–1 of mercury and the preconcentration method was applied to environmental water samples with the recoveries between 92–96%. 相似文献
3.
A novel preconcentration technique using crosslinked chitosan for the determination of mercury by CVAAS 总被引:4,自引:0,他引:4
《Fresenius' Journal of Analytical Chemistry》1997,358(7-8):856-858
4.
The optimum experimental conditions, with respect to sample and stripping solution composition, in computerised flow potentiometric stripping analysis for mercury(II) with a gold working electrode are described. When pre-electrolysis -was done in a sample to which ammonia and iodide had been added and stripping was done in an acidified bromide solution containing chromium(VI), a detection limit of 2 nM (0.4 μg kg-1) was obtained after 90 s of pre-electrolysis, the dynamic range being almost three decades. Copper(II) interfered when present in a 1000-fold excess and silver(I) when present in a 5-fold excess over mercury(II). 相似文献
5.
V. Balarama Krishna Mullapudi Nidhi Garg Dheeram Karunasagar 《International journal of environmental analytical chemistry》2018,98(9):811-829
A novel and simple microprecipitation method was developed for the preconcentration of ultra-trace quantities of inorganic and methyl mercury species (iHg and MeHg) prior to their determination by cold vapour atomic absorption spectrometry (CVAAS). This method is based on the formation of anionic complexes of Hg2+ with KI followed by ion-associate complex with cetyltrimethyl ammonium bromide (CTAB) that forms a fluffy precipitate in perchloric acid medium. As a result, a fluffy coagulated mass separates and collects at the top of the liquid surface with clear phase separation without need of cooling or heating or centrifugation. The ion-association complex of iHg was then extracted into surfactant-rich phase (top layer) of CTAB-perchlorate precipitate while the uncomplexed MeHg remained in the aqueous phase (bottom layer). This condition also facilitates the removal of aqueous phase by simply draining out. The fluffy mass formed was dissolved in a mixture of HNO3 and HCl which was subsequently treated with chloroform to separate the surfactant from the mixture. Then the aqueous phase containing the preconcentrated iHg was analysed for mercury by CVAAS. Key factors such as sample pH, concentration of KI and CTAB that affect the performance of the proposed microprecipitation method were thoroughly investigated. For the determination of total mercury, another fresh aliquot of water was initially adjusted to pH ~ 3.5 with perchloric acid and subjected to oxidation by using modified UV-irradiation set-up and then taken through the microprecipitation procedure. This method allows speciation of mercury with a preconcentration factor of 200 and the limits of detection (LOD) of mercury obtained for CVAAS in conjunction with the present preconcentration method was found to be 2.4 ng L?1. Average recoveries obtained with the proposed approach were found to be in the range of 96–104% with RSD values < 5%. The interfering effects of various cations and anions were also investigated. The method was successfully applied for the determination of ultra-trace quantities of mercury species in real samples such as bottled water, tap water, lake water and ground waters. 相似文献
6.
The thermal decomposition of mercury(I) and (II) sulfates has been investigated by thermogravimetry. The solid-state decomposition products have been characterized by infrared and Raman spectroscopy, mass spectrometry and an X-ray diffraction method. It is concluded that mercury(I) sulfate decomposes in two steps, initially forming a mixture of metallic mercury and mercury(II) sulfate — the latter subsequently decomposes without forming a stable intermediate. The stoichiometry of disproportionation of mercury(I) sulfate and the thermal stability range of mercury(I) and mercury(II) sulfates have been established.
Zusammenfassung Die thermische Zersetzung von Quecksilber(I) und (II)-sulfaten wurde durch Thermogravimetrie untersucht. Die Festphasen-Zersetzungsprodukte wurden durch Infrarot- und Ramanspektroskopie, Massenspektrometrie und Röntgendiffraktion charakterisiert. Es wurde gefolgert, dass Quecksilber(I)sulfat in zwei Stufen zersetzt wird, unter anfänglicher Bildung eines Gemisches von metallischem Quecksilber und Quecksilber(II)-sulfat, welches in der Folge ohne Bildung eines stabilen Zwischenproduktes zersetzt wird. Die Stöchiometrie der Disproportionierung des Quecksilber(I)sulfats und der Bereich der Thermostabilität der Quecksilber(I) und Quecksilber(II)sulfate wurden ermittelt.
Résumé La décomposition thermique des sulfates de mercure(I) et de mercure(II) a été suivie par TG. On a caractérisé les produits de la décomposition en phase solide par spectroscopies infrarouge et Raman, spectrométrie de masse et diffraction des rayons X. On en a conclu que le sulfate de mercure(I) se décompose en deux étapes, formant initialement un mélange de mercure métallique et de sulfate de mercure(II), ce dernier se décomposant ensuite sans formation d'un intermédiaire stable. Les proportions stoechiométriques de la dismutation du sulfate de mercure(I) et de l'intervalle de stabilité thermique des sulfates de mercure(I) et de mercure(II) ont été établis.
- . , , . , , (), - . - .相似文献
7.
A systematic study of the behavior of many metal ions on the weakly basic cellulose exchanger DEAE in dilute thiocyanate media showed that few metal ions are adsorbed. The adsorption of mercury(II) allows a rapid and highly selective separation from about 40 metal ions. Quantitative results are quoted for the separation of ca. 100 μg of mercury(II) from milligram amounts of other metal ions; 100 μg to 10 mg of mercury(II) can be quantitatively separated from iron(III) in proportions of mercury(II): iron(III) = 100:1 to 1:8,000 on a column containing only 1 g of DEAE. 相似文献
8.
9.
A colorimetric assay has been developed for the simultaneous selective detection of silver(I) and mercury(II) ions utilizing metal nanoparticles (NPs) as sensing element based on their unique surface plasmon resonance properties. In this method, sulfhydryl group modified cytosine-(C)-rich ssDNA (SH-C-ssDNA) was self-assembled on gold nanoparticles (AuNPs) to produce the AuNPs-C-ssDNA complex, and sulfhydryl group modified thymine-(T)-rich ssDNA (SH-T-ssDNA) was self-assembled on silver nanoparticles (AgNPs) to produce the AgNPs-T-ssDNA complex. Oligonucleotides (SH-C-ssDNA or SH-T-ssDNA) could enhance the AuNPs or AgNPs against salt-induced aggregation. However, the presence of silver(I) ions (Ag(+)) in the complex of ssDNA-AuNPs would reduce the stability of AuNPs due to the formation of Ag(+) mediated C-Ag(+)-C base pairs accompanied with the AuNPs color change from red to purple or even to dark blue. Moreover, the presence of mercury(II) ions (Hg(2+)) would also reduce the stability of AgNPs due to the formation of Hg(2+) mediated T-Hg(2+)-T base pairs accompanied with the AgNPs color change from yellow to brown, then to dark purple. The presence of both Ag(+) and Hg(2+) will reduce the stability of both AuNPs and AgNPs and cause the visible color change. As a result, Ag(+) and Hg(2+) could be detected qualitatively and quantitatively by the naked eye or by UV-vis spectral measurement. The lowest detectable concentration of a 5 nM mixture of Ag(+) and Hg(2+) in the river water was gotten by the UV-vis spectral measurement. 相似文献
10.
Wenshan Qu Yunhui Zhai Shuangming Meng Yueqin Fan Qiang Zhao 《Mikrochimica acta》2008,163(3-4):277-282
A new method for selective solid-phase extraction and preconcentration of trace mercury(II) from aqueous solution was developed by using poly-allylthiourea as a new extractant. The procedure is based on the retention of analyte in the form of thiourea complex on a mini column of polymer resin. The effects of pH, eluent type, eluent concentration, sample volume, sample flow rate, and foreign ions on the recovery of the analyte were investigated using model solutions. At optimal pH value, the extraction capacity of the new sorbent was 1.13 mmol g?1. The adsorption behavior of mercury(II) on the sorbent can be described by a Langmuir adsorption isotherm equation. The method was validated by analyzing a certified reference material with the results being in agreement with those quoted by manufacturers. The method was applied to the determination of trace inorganic mercury(II) in natural water samples and vegetables with satisfactory results. 相似文献
11.
Iron protoporphyrin-modified monolithic support for on-line preconcentration of angiotensin prior to CE analysis 总被引:1,自引:0,他引:1
An on-line preconcentration method using a polymeric monolithic support is proposed for the retention of the decapeptide angiotensin I and its subsequent analysis by CZE. Monolithic capillary columns were prepared in fused-silica (FS) capillaries of 150 microm id by ionizing radiation-initiated in situ polymerization and cross-linking of diethylene glycol dimethacrylate and glycidyl methacrylate, and chemically modified with iron protoporphyrin IX (Fe-ProP). Monolithic microcolumns (8 mm long) were coupled on-line to the inlet of the separation capillary (FS capillary, 75 microm id x10 cm from the inlet to the microcolumn and 27 cm from the microcolumn to the detector). Angiotensin I was released from the sorbent by a 50 mM sodium phosphate, pH 2.5/ACN, 75:25 v/v solution and then analyzed by CZE with UV absorption detection at 214 nm. The concentration LOQ (CLOQ) was 0.5 ng/mL. The Fe-ProP-derivatized monolithic microcolumn coupled to the separation capillary exhibited a high retention capacity for peptide angiotensin I, and showed as much as 10,000-fold improvement in concentration sensitivity. 相似文献
12.
A new method for solid-phase extraction and preconcentration of trace mercury(II) from aqueous solution was developed using 1,5-diphenylcarbazide doped magnetic Fe3O4 nanoparticles as extractant. The surface treatment did not result in the phase change of Fe3O4. Various factors which influenced the recovery of the analyte were investigated using model solutions and batch equilibrium technique. The maximum adsorption occurred at pH?>?6, and equilibrium was achieved within 5 min. Without filtration or centrifugation, these mercury loaded nanoparticles could be separated easily from the aqueous solution by simply applying an external magnetic field. At optimal conditions, the maximum adsorption capacity was 220 μmol g?1. The mercury ions can be eluted from the composite magnetic particles using 0.5 mol L?1 HNO3 as a desorption reagent. The detection limit of the method (3σ) was 0.16 μg L?1 for cold vapor atomic absorption spectrometry, and the relative standard deviation was 2.2%. The method was validated by the analysis of a certified reference material with the results being in agreement with those quoted by manufactures. The method was applied to the preconcentration and determination of trace inorganic mercury(II) in natural water and plant samples with satisfactory results. 相似文献
13.
A novel approach to the electrochemical determination of heavy metals in tap water using anodic stripping voltammetry was developed using screen-printed electrodes modified with gold films. After optimisation of the experimental conditions, the screen-printed electrodes modified with gold films displayed excellent linear behaviour in the examined concentration range from 2 to 16 µg L-1 mercury and lead in 50 mM HCl with a detection limit of 1.5 µg L-1 and 0.5 µg L-1 for mercury and lead, respectively. In order to decrease the working range down to less than 1 µg L-1, a preconcentration step based on the use of magnetic particles modified with thiols was introduced into the protocol. Applying optimum binding conditions, the assay using screen-printed electrodes modified with gold films displayed excellent linear behaviour in the concentration range 0.1 to 0.8 µg L-1 in 50 mM HCl. The detection limit after a 120 s deposition time for mercury and lead were 0.08 µg L-1 and 0.02 µg L-1, respectively. The method has been applied to the determination of mercury and lead traces in tap water 相似文献
14.
R.J. Watling 《Analytica chimica acta》1978,99(2):357-360
The stability constants of aluminium(III), gallium(III), indium(III) and scandium(III) with 8-hydroxyquinoline and its 2-methyl derivative have been determined by potentiometric titration, with computation by the SCOGS program. In contrast to previous work, the results show that protonated species occur in several of the equilibria. The constants are discussed in terms of the nature of metal-to-ligand bonding in the complexes. X-ray photoelectron spectroscopy of the ligand coordinating atoms in the solid complexes confirms the significantly increased covalency of the gallium—oxygen bond compared to the same bond in the aluminium complex. 相似文献
15.
16.
Summary A new procedure for derivatisation of inorganic mercury(II) to diphenylethynylmercury with simultaneous extraction into dichloromethane is proposed. The organomercury derivative is effectively analysed by HPLC using UV detection. The calibration curve is linear over three orders of magnitude (0.02–50 mg L–1 Hg); the detection limit is 0.1 ng Hg. A preliminary study of the effect of potential interfering agents, in particular Cu(II), Zn(II), Cd(II), Pb(II), and cysteine, and applications of the present methodology to real environmental samples are presented. 相似文献
17.
Jianping Shi Zheng Hu Qun He Zhifeng Tu Lina Zhang 《International journal of environmental analytical chemistry》2013,93(11):1024-1034
A new sorbent S-benzyldithiocarbazate (SBDTC) modified activated carbon (AC-SBDTC) was prepared and studied for preconcentration for trace mercury(II) prior to inductively coupled plasma atom emission spectrometry (ICP-AES). The experimental conditions were optimised with respect to different experimental parameters using both batch and column procedures in detail. The optimum pH value for the separation of Hg(II) on the new sorbent was 3, while the adsorption equilibrium was achieved in less than 5?min. Complete elution of the adsorbed metal ions from the sorbent surface was carried out using 5?mL of 0.25?mol?L?1 of HCl and 2% CS(NH2)2. Common coexisting ions did not interfere with the determination. The maximum static adsorption capacity of the sorbent under optimum conditions was found to be 0.55?mmol?g?1. The detection limit of the present method was found to be 0.09?ng?mL?1, and the relative standard deviation (RSD) was lower than 2.0%. The procedure was validated by analysing the certified reference river sediment material (GBW 08301, China), the results obtained were in good agreement with standard values. This sorbent was successfully employed in the separation and preconcentration of trace Hg(II) from the natural water samples yielding 80-fold concentration factor. 相似文献
18.
Díez-Gil C Martínez R Ratera I Hirsh T Espinosa A Tárraga A Molina P Wolfbeis OS Veciana J 《Chemical communications (Cambridge, England)》2011,47(6):1842-1844
The rational design of a mercury(II) ligand consisting in a 1-(4'-oxyphenyl)-4(1'-pyrenyl)-2,3-diaza-1,3-butadiene receptor unit, optimizes the sensitivity and reliability of a SPR sensor by the formation of a well packed SAM over the gold surface. SPR analysis allows detecting mercury(II) concentrations in aqueous systems in the picomolar range, meliorating on three orders of magnitude the EU mercury(II) detection limit in drinkable water. 相似文献
19.
《Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy》1978,34(7-8):667-671
The following rhodanine (HRd) complexes of zinc(II), cadmium(II), mercury(II) and mercury(I) have been prepared and studied by i.r. spectra: M(Rd)2(NH3)2 (MZn, Cd) with a 4N,2S-six-coordination; Zn3(Rd)4(CH3COO)(OH), Cd2(Rd)3(HRd)3(CH3COO)(H2O) in which the acetato anion is bicoordinated; Hg(Rd)2, Hg2(HRd)3(BF4)2·0.5(HAc or EtOH), Hg(HRd)(CF3COO)2·H2O in which both the ligands HRd and Rd− are S,N-bonded to the metal; Hg(HRd)2Cl2, Hg(HRd)4(ClO4)2 in which the ligand HRd is S-bonded; Hg3(Rd)3 · NH3 with S,N-bonded Rd− ligand. 相似文献