固相萃取-超高效液相色谱-质谱联用技术检测大鼠血浆中T-2毒素及其主要代谢产物

应用固相萃取-超高效液相色谱-三重四极杆-线性离子阱串联质谱技术,建立了高灵敏度的大鼠血浆中单端孢霉烯族(T-2)毒素及其5种主要代谢物的分析方法。在优化的固相萃取条件下,大鼠血浆经HLB固相萃取柱净化富集后,以XDB-C18色谱柱(50 mm×4.6 mm,1.8μm)分离,以5 mmol/L乙酸铵溶液和甲醇溶液为流动相进行梯度洗脱,以玉米赤霉酮为内标,在正离子多反应监测模式下对各分析物进行定性和定量分析。各分析物在0.1～500.0μg/L范围内线性良好(R2>0.997);检出限介于0.02～0.3μg/L之间;加标回收率为93.5%～120.3%;相对标准偏差均小于13%。本方法快速、重现性好、灵敏度高,已成功应用于T-2毒素中毒的溯源性研究。     

气相色谱-质谱法测定哈茨木霉菌代谢产物中单端孢霉烯化合物的含量

利用气相色谱-质谱法建立了哈茨木霉菌发酵代谢产物中活性有效成分单端孢霉烯化合物含量的分析测定方法。用乙酸乙酯提取样品,并测定提取液中单端孢霉烯化合物的含量,以保留时间和单端孢霉烯化合物的质谱特征离子峰(m/z292、277、149、135、121和107)为定性分析依据,用外标法定量。在所建立的分析条件下,单端孢霉烯化合物的保留时间为8.09min,方法检出限为0.04μg/L;在0.5~50μg/L范围内具有良好的线性关系,相关系数为0.9998;回收率102.3%;RSD为0.86%。方法灵敏度高,选择性好,准确度高,可为哈茨木霉菌菌株改造和发酵生产研究中单端孢霉烯化合物的跟踪检测提供灵敏、准确的分析手段。     

复合免疫亲和柱净化-液相色谱-串联质谱法测定动物源食品中6种黄曲霉毒素和6种玉米赤霉醇类真菌毒素残留量

建立了动物源食品(猪肉、鱼肉、猪肝)中6种黄曲霉毒素(AFB1、AFB2、AFG1、AFG2、AFM1和 AFM2)和6种玉米赤霉醇类真菌毒素(α-玉米赤霉醇、β-玉米赤霉醇、α-玉米赤霉烯醇、β-玉米赤霉烯醇、玉米赤霉酮和玉米赤霉烯酮)残留量的复合免疫亲和柱净化-高效液相色谱-串联质谱(HPLC-MS/ MS)检测方法。样品经β-葡萄糖苷酸/硫酸酯复合酶酶解后,用甲醇-乙腈(20∶80, V/ V)提取,提取液经玻璃纤维滤纸过滤,滤液用PBS 溶液稀释,复合免疫亲和柱富集和净化后,采用 HPLC-MS/ MS 法分析。12种目标分析物中 AFB2和 AFG2的线性范围为0.03~6.0μg/ L,其余目标分析物的线性范围为0.05~20μg/ L,线性相关系数均大于0.999,检出限在0.01~0.03μg/ kg 范围内,定量限在0.04~0.09μg/ kg 范围内。分别以0.5,1.0和5.0μg/ kg 添加浓度水平进行方法学验证,平均回收率为73.6%~98.4%,相对标准偏差(RSD)为1.9%~11.2%。本方法简便、灵敏,能够满足动物源食品中痕量黄曲霉毒素和玉米赤霉醇类真菌毒素残留的测定要求。     

多功能针式过滤器净化超高效液相色谱法测定大米和花生中玉米赤霉烯酮

建立了一种基于多功能针式过滤器净化的超高效液相色谱测定大米和花生中玉米赤霉烯酮的方法。样品经乙腈提取,采用多功能针式过滤器通过式净化,以超高效液相色谱法测定其中的玉米赤霉烯酮,色谱柱为ACQUITY UPLC BEH C18柱（100 mm×2.1 mm,1.7μm）,以甲醇-乙腈-水（体积比为8∶46∶46）为流动相等度洗脱,流量为0.3 mL/min,用荧光检测器检测,色谱峰面积外标法定量。玉米赤霉烯酮的质量浓度在2.5～500 ng/mL范围内与色谱峰面积线性关系良好,相关系数不小于0.999 5。大米和花生样品的方法检出限分别为15.0、30.0μg/kg,定量限分别为50.0、100.0μg/kg。样品加标回收率为77.11%～93.65%,测定结果的相对标准偏差为0.49%～4.95%(n=6)。该方法简便快速,适用于大米和花生中玉米赤霉烯酮的日常检测。     

多功能柱净化-柱后光化学衍生-高效液相色谱法同时检测玉米和花生中9种真菌毒素

建立了同时检测玉米和花生中黄曲霉毒素B1、B2、G1、G2、M1、M2、玉米赤霉烯酮、呕吐毒素和展青霉素的多功能柱净化-柱后光化学衍生-高效液相色谱检测方法。样品经乙腈-水(体积比为86∶14)提取,多功能净化柱净化,采用C18柱分离,以甲醇、乙腈和水为流动相进行梯度洗脱,在线光化学衍生,以荧光和二极管阵列测器同时检测。黄曲霉毒素B1、B2、G1、G2、M1、M2、玉米赤霉烯酮、呕吐毒素和展青霉素的检出限分别为0.02μg/kg、0.01μg/kg、0.03μg/kg、0.05μg/kg、0.08μg/kg、0.04μg/kg、0.09μg/kg、0.20mg/kg和0.04 mg/kg,在相应浓度范围内线性相关系数均大于0.999,平均加标回收率为80.0%~101.5%,相对标准偏差在1.3%~5.6%之间。该方法简便快速、灵敏度高、重现性好,可满足玉米、花生中9种黄曲霉毒素的检测。     

超高效液相色谱-串联质谱法测定食用油中16种真菌毒素

建立超高效液相色谱–串联质谱法测定食用油中黄曲霉毒素、玉米赤霉烯酮、伏马毒素等16种真菌毒素的方法。样品经乙腈–水–甲酸(体积比为80∶19∶1)振荡提取,过六合一真菌毒素免疫亲和柱净化,提取液用Waters ACQUITY UPLC BEH C18 (150 mm×2.1 mm, 1.7μm)色谱柱进行分离,采用内标法定量测定。方法的检出限为0.1～16.5μg/kg,定量限为0.3～50μg/kg,测定结果的相对标准偏差为2.3%～9.2%(n=6),平均回收率为75.9%～104.5%。该方法净化效果好,灵敏度高,具有良好的精密度与准确度,适用于同时检测食用油中的16种真菌毒素。     

高效液相色谱-串联质谱法检测花生中的黄曲霉毒素B_1

应用高效液相色谱-电喷雾串联四极杆质谱联用系统(HPLC-MS/MS),在多反应离子检测方式(MRM)下,对花生中的黄曲霉毒素B1进行检测.对花生中黄曲霉毒素B1的提取、净化、液相分离及串联质谱等相关检测参数进行了优化研究.用V(甲醇):V(水)=6:4提取,OASIS HLB SPE小柱净化,定容过滤.采用V(甲醇):V(水)(含体积分数0.1%甲酸)=7:3为流动相,前级离子313.0,二级离子241.1、269.1,ESI正离子方式检测,在3.3 min出峰.结果表明,在ESI正离子模式下,黄曲霉毒素B1在其线性定量范围0.1～50μg/kg内,相关系数达到0.9999,检出限为0.03μg/kg,最低定量限为0.1μg/kg.低、中、高浓度添加回收率范围为93%～105%.     

高效液相色谱-串联质谱法同时测定动物肝脏中玉米赤霉醇及其类似物残留量

采用高效液相色谱-串联质谱方法(HPLC-MS/MS)同时测定了动物肝脏中6种玉米赤霉醇及其类似物的残留量。酶解后的样品采用乙醚提取,经液-液分配(LLP)和HLB固相萃取(SPE)柱净化后,采用HPLC-MS/MS电喷雾电离(ESI-),多反应监测(MRM)模式检测,基质匹配外标曲线定量。按照欧盟法规2002/657/EC的要求进行验证。在添加浓度1～4μg/kg范围内,方法回收率在70%～90%之间;相对标准偏差小于20%。6种玉米赤霉醇及其类似物的判断限(CCα)在0.17～0.31μg/kg之间,检测能力(CCβ)在0.26～0.42μg/kg之间。本方法对其它动物源食品中玉米赤霉醇及其类似物残留的检测具有适用性。     

快速高分离液相色谱-串联质谱法测定植物组织中雌激素玉米赤霉醇类化合物

应用快速高分离液相色谱-串联质谱仪(RRLC-MS/MS),建立了植物组织中玉米赤霉醇类化合物(α-玉米赤霉醇、β-玉米赤霉醇、α-玉米赤霉烯醇、β-玉米赤霉烯醇、玉米赤霉酮、玉米赤霉烯酮)的检测方法.植物组织样品采用乙腈提取,碱性水溶液反萃取,经混合阴离子(MAX)固相萃取柱进行净化和富集后,用RRLC-MS/MS检测,多反应监测(MRM)模式下进行定性与定量分析.结果表明:玉米赤霉醇类化合物在0～20 μg/kg的线性范围内均具有良好的线性关系,方法检出限(LOD)为0.5 μg/kg,定量限(LOQ)为1.0 μg/kg,6种玉米赤霉醇类化合物的平均回收率为75.8%～105.4%,相对标准偏差为2.4%～12.1%.本方法可用于植物组织中玉米赤霉醇类化合物含量的测定.     

免疫亲和柱净化-柱后光化学衍生-高效液相色谱法同时检测粮谷中的黄曲霉素、玉米赤霉烯酮和赭曲霉毒素A

建立了同时检测粮谷中黄曲霉毒素(B1、B2、G1和G2)、玉米赤霉烯酮和赭曲霉毒素A的免疫亲和柱净化-柱后光化学衍生-高效液相色谱方法.样品经过甲醇-水(体积比为80∶20)提取,通过免疫亲和柱富集和净化,采用Waters Nova-Pak色谱柱(3.9 mm I.d.×150 mm,4 μm),以甲醇、乙腈和1%的磷酸溶液为流动相,梯度洗脱,柱后光化学衍生、改变波长荧光检测.黄曲霉毒素(B1、B2、G1和G2)、玉米赤霉烯酮和赭曲霉毒素A检出限分别为0.24,4.0和0.5 μg/kg,标准曲线的线性范围分别为0.24～6.0,4.0～100.0和0.5～40.0 μg/L;在小麦、玉米、黑麦样品中,平均加标回收率为70.8% ～94.0%,相对标准偏差为2.79% ～9.38%.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.