Adsorption-desorption studies using ESD of CCl2F2, C2H2F2 and C2F6 on tungsten

The behavior of the desorbing F⁺ ion current from electron bombarded CCl₂F₂, C₂H₂F₂ and C₂F₆ adsorbed on tungsten has been used to investigate the processes of adsorption and desorption of these gases. For tungsten near room temperature, measurements of the F⁺ ion current as a function of electron bombardment time indicated very similar or even identical F⁺-yielding adsorbed species resulting from adsorption of either CCl₂F₂ or C₂H₂F₂ and widely different species from C₂F₆. Cl⁺ ions were also observed to desorb from CCl₂F₂ ad-layers. The behavior of the Cl⁺ ion current with time during electron bombardment indicated electronic conversion between adsorbed binding modes. Complementary investigations on the interaction of CCl₂F₂, C₂H₂F₂ and C₂F₆ with tungsten were carried out by thermal desorption experiments in which the F⁺ ion signal was used to observe the coverage decrease of the F⁺-yielding species. The experiments were performed at tungsten temperatures in the 1200–1600 K range. It was concluded that the F⁺-yielding adsorbed species from CCl₂F₂ and C₂H₂F₂ were strongly bound to the tungsten surface. The F⁺-yielding species from C₂F₆ were found to be weakly bound. From a comparison of the ESD and thermal desorption results, the possibility of dissociative adsorption as well as the nature of the adsorbed species is discussed.     

Carbon K-shell excitation of C2H2, C2H4, C2H6 and C6H6 by 2.5 keV electron impact

Energy loss spectra of 2.5 keV electrons in the region of the carbon K-edge in C₂H₂, C₂H₄, C₂H₆ and C₆H₆ are report     

Auger spectra of CO,C2H4, C2N2 and C6H6 adsorbed on Pt(111)

Electron excited carbon KVV Auger spectra of CO, C₂H₄, C₂N₂ and C₆H₆ adsorbed on Pt(111) are compared. By estimating the effective Coulomb interaction between the final-state holes it is possible to associate some features with transitions observed in free molecule spectra, but others must involve at least one electron with energy within the conduction band of the metal. Such “cross-transitions” are associated with strong 2π* character of filled states in the presence of a core hole in molecules such as CO.     

The chemisorption of CO,CO2, C2H2, C2H4, H2 and NH3 on the clean Fe(100) and (111) crystal surfaces

The chemisorption of small molecules (CO, CO₂, C₂H₂, C₂H₄, H₂ and NH₃) has been studied on the clean Fe(110) and (111) crystal faces by low-energy electron diffraction (LEED) and thermal desorption. C₂H₄ and C₂H₂ yield the same sequence of surface structures that change with temperature and crystal orientation. CO and CO₂ chemisorption similarly results in the formation of the same types of surface structures that change with surface temperature and crystal orientation. Ammonia forms several ordered surface structures on both iron crystal faces. All of the molecules decompose as a function of temperature on the iron surfaces as indicated by the Auger and thermal desorption spectra.     

Absorption spectra of C6H6 and C6D6 near 340 nm

The absorption spectra of C₆H₆ and C₆D₆ in the liquid phase have been studied near 340 nm. The absorption spectrophotometric mounting was a sequential double-beam attachment with linear response to energy on scanning of the spectrum before the exit slit and an electronic device which gives directly either the absorbance or the integrated absorbance of a transition and, consequently, its oscillator strength.The oscillator strength measured for the band of C₆H₆ is 8×10^?8, which corresponds to a dipole moment of 2.4×10^?3 Debye; this value is of the same order as a theoretical value calculated by Tsubomura and Mulliken (3.8×10^?3 Debye) for a transition between states ³F and ³A of an oxygen-benzene pair. This agreement corroborates the hypothetical existence of such a transition.The first vibrational band is at 28553 cm^?1 for C₆H₆; this band is not observed in the vapor or solid phase. It corresponds probably to the transition 0-0, which is considered in the literature to be near 29500 cm^?1. The isotopic shift measured for this first band is 164 cm^?1. The vibrational frequencies are, respectively, 910 cm^?1 for C₆H₆ and 889 cm^?1 for C₆D₆.     

Far-infrared absorption intensities of H2O and D2O in C6H6

Far-i.r. absorption intensities have been measured for H₂O and D₂O in C₆H₆ solutions. Beer's law plots were found to be nonlinear. From the plots, the equilibrium constants of dimer formation in benzene were estimated to be 2.4M^-1 and 3.3M^-1 for H₂O and D₂O at 20°C, respectively. Based on Onsager's reaction field and including explicitly the effect of differences in molecular size between solute and solvent molecules, the internal moment of a water molecule and the volume ratio of a molecule to a cavity were estimated from the integrated absorption intensity of a D₂O monomer in C₆H₆ as 1.98 D and 0.7, respectively     

Microstructural and superconducting properties of C6H6 added bulk MgB2 superconductor

The effect of aromatic hydrocarbon (benzene, C₆H₆) addition on lattice parameters, microstructure, critical temperature (T_c), critical current density (J_c) of bulk MgB₂ has been studied. In this work only 2 mol% C₆H₆ addition was found to be very effective in increasing the J_c values, while resulting in slight reduction of the T_c. J_c values of 2 mol% C₆H₆ added MgB₂ bulks reached to 1.83×10⁶ A/cm² at 15 K and 0 T. Microstructural analyses suggest that J_c enhancement is associated with the substitution of carbon with boron and which also results in the smaller MgB₂ grain size. The change in the lattice parameters or the lattice disorder is claimed as a cause of the slight reduction in the T_c by carbon addition. We note that our results show the advantages of C₆H₆ addition include homogeneous mixing of precursor powders, avoidance of expansive nanoadditives, production of highly reactive C, and significant enhancement in J_c of MgB₂, compared to un-doped samples.     

Structure and phase transitions in chloroantimonate(V) crystals: [(C2H5)3NH]SbCl6 and [(C2H5)3NH]SbCl6·1/2[(C2H5)3NH]Cl

New triethylammonium salts: [(C₂H₅)₃NH]SbCl₆ (TCA) and [(C₂H₅)₃NH]SbCl₆·1/2[(C₂H₅)₃NH]Cl (TCAT) have been synthesized. The compounds crystallise in monoclinic symmetry: space groups P2₁/n and P2₁/c, for TCA at 293 K and TCAT at 100 K, respectively. The crystal structure of [(C₂H₅)₃NH]SbCl₆ consists of discrete ionic pairs—triethylammonium cations and hexachloroantimonate anions—linked via the bifurcated N-H?Cl hydrogen bonds. The crystal structure of [(C₂H₅)₃NH]SbCl₆·1/2[(C₂H₅)₃NH]Cl is composed of three symmetrically independent triethylammonium cations, chlorine anion and two symmetrically independent hexachloroantimonate anions. TCA undergoes a structural phase transition at 336 K (on heating) into the orthorhombic C222 space group, whereas TCAT reveals a structural phase transition at 332 K. The phase transitions are of the first order type. TCA shows a ferroelastic domain structure below 336 K. Differential scanning calorimetry, dilatometric, dielectric dispersion and Raman scattering measurements have been used to study the phase transition mechanisms in these triethylammonium salts.     

Geometric shielding corrections for total cross section calculations of electron scattering by CH4, C2H6, C2H3F3, C2H4, C2F4, C2Cl4 and C2Cl2F2 from 30–5000?eV

To quantify the changes in the geometric shielding effect in a molecule as the incident electron energy varies, an empirical fraction, which represents the total cross section contributions of shielded atoms in a molecule at different energies, is presented. Using this empirical fraction, the total cross sections for electron scattering by CH₄, C₂H₆, C₂H₃F₃, C₂H₄, C₂F₄, C₂Cl₄ and C₂Cl₂F₂ are calculated over a wide energy range from 30 to 5000 eV by the additivity rule model at the Hartree-Fock level. The quantitative total cross sections are compared with those obtained by experiment and other theories where available. Good agreement is attained above 100 eV.     

EXTENDED SSH MODEL FOR C58B2 AND C58N2

The extended Su-Schrieffer-Heeger model is used to study the electronic energy levels and molecular structures for two kinds of isomers of C₅₈X₂(X=B, or N). In each case we obtain two sets of stable solutions. For C₅₈X₂ (1, 2), both sets of solutions are found to be reasonable, indicating two different phases. For C₅₈X₂(1, 60 ), only one set of solutions which satisfy the central inversion symmetry is physically reasonable.     

Adsorption of NH3 and NO2 molecules on C48B6N6 heterofullerene: A DFT study on electronic properties

Adsorption of NH₃ and NO₂ molecules on the external surface of C₄₈B₆N₆ heterofullerene is investigated using DFT method. Attachment of NH₃ and NO₂ on C₄₈B₆N₆ heterofullerenes are compared with the bare C₄₈B₆N₆ model optimized at the B3LYP/6-31G^? level. The high surface binding energies indicates that ammonia undergoes chemical adsorption and could be compatible with the long recovery time but C₄₈B₆N₆ should be good NO₂ sensors with quick response as well as short recovery time. Total (TDOS) and partial (PDOS) density of state calculations is also considered to elucidate the difference in the NH₃ and NO₂ gas detection mechanism of C₄₈B₆N₆. The overlap population density of state (OPDOS) indicated that the chemical adsorption is due to the overlap of atomic orbitals below the Fermi level. The calculated results suggest that the C₄₈B₆N₆ heterofullerene is a suitable sensor material for NO₂ and is an ideal material for elimination and filtering of ammonia.     

LEED and thermal desorption studies of small molecules (H2, O2, CO,CO2, NO,C2H4, C2H2 and C) chemisorbed on the stepped rhodium (755) and (331) surfaces

The chemisorption of H₂, O₂, CO, CO₂, NO, C₂H₂, C₂H₄ and C has been studied on the clean stepped Rh(755) and (331) surfaces. Low energy electron diffraction (LEED), Auger electron spectroscopy (AES) and thermal desorption spectroscopy (TDS) were used to determine the size and orientation of the unit cells, desorption temperatures and decomposition characteristics for each adsorbate. All of the molecules studied readily chemisorbed on both stepped surfaces and several ordered surface structures were observed. The LEED patterns seen on the (755) surface were due to the formation of surface structures on the (111) terraces, while on the (331) surface the step periodicity played an important role in the determination of the unit cells of the observed structures. When heated in O₂ or C₂H₄ the (331) surface was more stable than the (755) surface which readily formed (111) and (100) facets. In the CO and CO₂ TDS spectra a peak due to dissociated CO was observed on both surfaces. NO adsorption was dissociative at low exposures and associative at high exposures. C₂H₄ and C₂H₂ had similar adsorption and desorption properties and it is likely that the same adsorbed species was formed by both molecules.     

The influence of structural defects on the adsorption of simple molecules (H2, C2H2, C2H4, C2H6, CO,NO) on rhenium single crystals

Using Thermal Programmed Desorption (TPD), Low Energy Electron Diffraction (LEED) and Auger Electron Spectroscopy (AES) we have studied the adsorption of hydrogen-containing molecules (H₂, C₂H₂, C₂H₄, C₂H₆) and oxygen-containing molecules (CO and NO) on two vicinal planes of the Re(0001) surface. The two surfaces are designated thus: ReS ¦14(0001)(101̄1)¦, ReS |6(0001)(167̄1) | . The structural defects have little effect on the adsorption of hydrogen and the hydrocarbons. They are more influential in the case of the oxygen-containing molecules. This is particularly true for CO; on the kink sites the CO molecules can completely dissociate whereas only a partial dissociation is possible on the steps. These results should be viewed in relation to the strong bond energy between carbon and oxygen in a CO molecule of 256 kcal/mole and the great affinity of oxygen for rhenium; E_Re?O = 127 kcal/mole.     

LEED,AES and thermal desorption studies of chemisorbed Hydrogen and hydrocarbons (C2H2, C2H4, C6H6, C6H12) on the (111) and stepped [6(111) × (100)] iridium crystal surfaces; comparison with platinum

The adsorption of hydrogen, ethylene, acetylene, cyclohexane and benzene was studied on both the (111) and stepped [6(111) × (100)] crystal surfaces of iridium. The techniques used were low energy electron diffraction, Auger electron spectroscopy, and thermal desorption mass spectrometry. At 30°C, acetylene, ethylene and benzene are adsorbed with a sticking probability near unity. The sticking probability of cyclohexane is less than 0.1 on both surfaces. Heating the (111) surface above 800°C, in the presence of the hydrocarbons, results in the formation of an ordered carbonaceous overlayer with a diffraction pattern corresponding to a (9 × 9) surface structure. No indication for ordering of the carbonaceous residue was found on the stepped iridium surface in these experimental conditions. The hydrocarbon molecules form only poorly ordered surface structures on both iridium surfaces when the adsorption is carried out at 30°C. Benzene is the only gas that can be desorbed from the surfaces in large amounts by heating. Ethylene remains largely on the surface, only a few percent is removed by heating while acetylene and cyclohexane cannot be desorbed at all. When adsorption is carried out at 30°C and the crystal is subsequently flashed to high temperature, hydrogen is liberated from the surface. The hydrogen desorption spectra from the iridium surfaces exposed to C₂H₄, C₂H₂, or C₆H₆ exhibit two hydrogen desorption peaks, one around 200°C and the second around 350°C. The temperatures where these peaks appear vary slightly with the type of hydrocarbon. The relative intensities of these two peaks depend strongly on the surface used. Arguments are presented that decomposition of the hydrocarbon molecules (C-H bond breaking nd possibly also C-C bond breaking) occurs easier on the stepped iridium surface than on the (111) surface. Hydrogen is desorbed at a higher temperature from an iridium surface possessing a high density of surface imperfections than from a perfect iridium (111) surface. The results are compared with those obtained previously on similar crystal surfaces of platinum. It appears that C-H bond breaking occurs more easily on iridium than on platinum.     

C72,La2@C72几何结构和电子性质的计算研究

采用密度泛涵理论(density functional theory, DFT)中的广义梯度近似(generally gradient approximation, GGA)对富勒烯C₇₂和内掺金属La富勒烯La₂@C₇₂三种同分异构体的几何结构和电子结构进行研究.发现在C₇₂的三种同分异构体中，满足独立五边形规则(isolated-pentagon-rule，IPR)的C₇₂(D_{6d< 关键词： 72}')" href="#">C₇₂ 2@C₇₂')" href="#">La₂@C₇₂ 密度泛涵理论 几何结构 电子结构     

Direct observation of the torsional fundamental of gaseous C2F6 in the far infrared

The forbidden a_1u torsional vibration of C₂F₆ has been observed in far-infrared absorption at 67.5 cm^?1 with an integrated intensity of 0.20 ± 0.08 × 10^?2 cm^?2. The observed intensity is compared with that expected theoretically from Coriolis coupling of the torsion to the infarred-active a_2u and e_u vibrations. For certain force fields and choices of sign for the dipole moment derivatives the agreement is satisfactory. The potential barrier to internal rotation has been recomputed from the observed torsional frequency to be 1367 cm^?1. (3.91 kcal mole^?1). This value is compared with those of ethane and partially fluorinated ethanes.     

Leed and thermal desorption studies of small molecules (H2, O2, CO,CO2, NO,C2H4, C2H2 AND C) chemisorbed on the rhodium (111) and (100) surfaces

The chemisorption of H₂, O₂, CO, CO₂, NO, C₂H₄, C₂H₂ and C has been studied on the clean Rh(111) and (100) surfaces. LEED, AES and thermal desorption were used to determine the surface structures, disordering and desorption temperatures, displacement and decomposition characteristics for each species. All of the molecules studied readily chemisorbed on both surfaces. A large variety of ordered structures was observed, especially on the (111) surface. The disordering temperatures of most ordered surface structures on the (111) surface were below 100°C. It was necessary to adsorb the gases at 25° C or below in order to obtain well-ordered surface structures. Chemisorbed oxygen was readily removed from the surface by H₂ or CO gas at crystal temperatures above 50°C. CO₂ appears to dissociate to CO upon adsorption on both rhodium surfaces as indicated by the identical ordering and desorption characteristics of these two molecules. C₂H₄ and C₂H₂ also had very similar ordering and desorption characteristics and it is likely that the adsorbed species formed by both molecules is the same. Decomposition of ethylene produced a sequence of ordered carbon surface structures on the (111) face as a result of a bulk-surface carbon equilibrium. The chemisorption properties of rhodium appear to be generally similar to those of iridium, nickel and palladium.     

四氯乙烯的同步辐射光电离研究

利用VUV同步辐射光源和反射式飞行时间质谱仪，在超声冷却条件下对四氯乙烯(C₂Cl₄)进行了光电离研究，通过测量各离子的光电离效率(PIE)曲线，得到了C₂Cl₄的电离势IP(C₂Cl₄) =(9.36±0.05)eV及C₂Cl₄光解离碎片离子C₂Cl₃⁺，C_{关键词： 真空紫外光电离 离子出现势 电离势 四氯乙烯}     

C2H4在Ru(1010)表面吸附与分解的研究

用X射线电子能谱(XPS)、热脱附谱(TDS)和紫外光电子能谱(UPS)方法研究了乙烯(C_{2H4)在Ru(1010)表面的吸附,在低温下(200K以下)乙稀(C2Ｈ4})可以在Ru(1010)表面上以分子状态稳定吸附,在200K以上乙烯(C₂H ₄)则发生了脱氢分解反应.TDS结果表明乙烯(C₂H₄)分 解后的主要产物为乙炔(C< 关键词： 乙烯 钌(1010)表面 吸附与分解     

C2和C2+,C2-的电子结构与势形共振

本文在独立电子近似的基础上,根据多重散射自洽场理论方法,计算了C₂和C₂⁺,C₂^-分子(离子)的电子结构,阐明了势形共振能量和上述分子(离子)电子数的关系,结果表明,随着电子数的减少,C原子2s-2p轨道杂化减弱,势形共振的能量将降低(如降低到阈值下,则势形共振消失)。 关键词：