Rheology of interfacial layers

Dilational and shear viscoelasticities are important properties of interfacial layers. These quantities are particularly relevant in all systems which contain a huge internal interfacial area such as foams and emulsions. Therefore, also the 3D rheological behavior of foams or emulsions studied by respective methods is superimposed by the 2D interfacial rheology.We report on recent developments in dilational and shear rheology from an experimental point of view as well as discuss the state of the art of the underlying theories. Examples of most relevant experiments are also presented and discussed. Although not yet extensively investigated, the links between bulk rheology of foams and emulsions and the rheology of the corresponding interfacial layers are discussed.     

Interfacial dilational properties of tri-substituted alkyl benzene sulfonates at air/water and decane/water interfaces

The dilational rheological properties of absorbed film of three pairs of structural isomers, tri-substituted alkyl benzene sulfonates, at the air-water and decane-water interfaces have been investigated by drop shape analysis method. The influences of bulk concentration on dilational elasticity and viscosity were expounded. Interfacial tension relaxation method was employed to obtain dilational parameters in a reasonably broad frequency range. The experimental results showed that the meta-alkyl to sulfonate group plays a crucial role in the interfacial dilational properties: the longer meta-alkyl will lead to higher dilational parameters for air-water interface and lower ones for decane-water interface when the total alkyl carbon numbers are equal. For alkyl benzene sulfonates with shorter meta-alkyl, the surface dilational properties are similar to interfacial dilational properties, whereas the surface dilational parameters are obviously higher than the interfacial dilational parameters for alkyl benzene sulfonates with longer meta-alkyl in general. The possible mechanism has been proposed and ensured by Cole-Cole plots.     

Rheology of interfacial layers

The response of interfacial layers to deformations in size and shape depends on their composition. The corresponding main mechanical quantities are elasticity and viscosity of dilation and shear, respectively. Hence, the interfacial rheology represents a kind of two-dimensional equivalent to the traditional bulk rheology. Due to growing interest in the quantitative understanding of foams and emulsions, more works are dedicated to studies on interfacial rheology. This overview presents the theoretical basis for traditional and recently developed experimental tools and discusses their application to different interfacial systems. While dilational rheology provides information on the composition of mixed interfacial layers, the shear rheology gives answers essentially on structures formed at an interface. The most frequently used methods at present are the oscillating drop and bubble tensiometry methods for dilational deformations and oscillating ring/bicone rheometers for shear deformations.     

弛豫法研究预交联颗粒凝胶的界面扩张流变性质

采用界面张力弛豫方法研究了一种新型聚合物--预交联颗粒凝胶(PPG)的界面流变性质, 考察了电解质及传统直链聚丙烯酰胺与PPG的相互作用对体系界面性质的影响, 计算得到了各体系界面扩张弹性和黏性的全频谱, 并通过归一法计算得到了相应的Cole-Cole图. 结果表明, 随着体相浓度的增加, PPG在界面层中形成网络结构, 界面扩张弹性和黏性大幅增强. 电解质能够中和PPG结构中的电荷, 明显降低扩张弹性和黏性. 直链聚丙烯酰胺与PPG在界面上可能形成更为复杂的结构, 膜的黏弹性由PPG决定.     

Interfacial rheology of mixed layers of food proteins and surfactants

Mixed protein–surfactant adsorption layers at liquid interfaces are described including the thermodynamic basis, the adsorption kinetics and the shear and dilational interfacial rheology. It is shown that due to the protrusion of hydrophobic protein parts into the oil phase the adsorption layers at the water–hexane interface are stronger anchored as compared to the water-air surface. Based on the different adsorption protocols, a sequential and a simultaneous scheme, the peculiarities of complexes between proteins and added surfactants are shown when formed in the solution bulk or at a liquid interface. The picture drawn from adsorption studies is supported by the findings of interfacial rheology.     

Dynamics of interfacial layers-experimental feasibilities of adsorption kinetics and dilational rheology

Each experimental method has a certain range of application, and so do the instruments for measuring dynamic interfacial tension and dilational rheology. While the capillary pressure tensiometry provides data for the shortest adsorption times starting from milliseconds at liquid/gas and tens of milliseconds at liquid/liquid interfaces, the drop profile tensiometry allows measurements in a time window from seconds to many hours. Although both methods together cover a time range of about eight orders of magnitude (10(-3) s to 10(5) s), not all surfactants can be investigated with these techniques in the required concentration range. The same is true for studies of the dilational rheology. While drop profile tensiometry allows oscillations between 10(-3) Hz and 0.2 Hz, which can be complemented by measurements with capillary pressure oscillating drops and the capillary wave damping method (up to 10(3) Hz) these six orders of magnitude in frequency are often insufficient for a complete characterization of interfacial dilational relaxations of surfactant adsorption layers. The presented analysis provides a guide to select the most suitable experimental method for a given surfactant to be studied. The analysis is based on a diffusion controlled adsorption kinetics and a Langmuir adsorption model.     

Dilational properties of gemini surfactant/polymer systems at the air–water surface

The surface properties of mixed system containing gemini anionic surfactant 1,2,3,4-butanetetracarboxylic sodium, 2,3-didodecyl ester and partly hydrolyzed polyacrylamide were investigated by surface tension measurements and oscillating bubble methods. The influences of surfactant concentration, dilational frequency, temperature, pH, as well as salts on dilational modulus were explored. Meanwhile, the interfacial tension relaxation method was employed to obtain the characteristic time of surface relaxation process. The polymers play important roles in changing the interfacial properties especially at lower surfactant concentration. The possible mechanism of the polymer in changing the interfacial properties is proposed. Both the hydrophobic and electrostatic interaction among the surfactants and polymers dominate the surface properties of mixed system. These dynamic properties are of fundamental interest in understanding the structure of adsorption layers, dynamics of surfactant molecules, and their interaction with polymers at the surface.     

Interfacial shear rheology of protein-surfactant layers

The shear rheology of adsorbed or spread layers at air/liquid and liquid/liquid phase boundaries is relevant in a wide range of technical applications such as mass transfer, monolayers, foaming, emulsification, oil recovery, or high speed coating. Interfacial shear rheological properties can provide important information about interactions and molecular structure in the interfacial layer. A variety of measuring techniques have been proposed in the literature to measure interfacial shear rheological properties and have been applied to pure protein or mixed protein adsorption layers at air/water or oil/water interfaces. Such systems play for example an important role as stabilizers in foams and emulsions. The aim of this contribution is to give a literature overview of interfacial shear rheological studies of pure protein and protein/surfactant mixtures at liquid interfaces measured with different techniques. Techniques which utilize the damping of waves, spectroscopic or AFM techniques and all micro-rheological techniques will not discuss here.     

Viscoelastic theory for nematic polymer interfaces

A macroscopic theory for the dynamics of compressible nematic polymer‐viscous fluid interfaces is developed from first principles. The theory is used to define and characterize the basic interfacial viscoelastic material properties of the ordered interfaces. The theory is based on a decomposition of the kinematic fields and nematic tensor order parameter that takes into account the symmetry breaking of the interface. The interfacial rate of entropy production used to identify the interfacial viscoelastic modes is given in terms of surface rate of deformation tensor and the surface Jaumann derivative of the tangential component nematic tensor order parameter. The derived surface viscous stress tensor is asymmetric and thus describes surface flow‐induced changes in the tensor order parameter. Consistency with the Boussinesq surface fluid appropriate for Newtonian interfaces is established. The interfacial material functions are identified as the dynamic surface tension, the interfacial dilational viscosities, and the interfacial shear viscosities. The interfacial material functions depend on the surface tensor order parameter and as a consequence anisotropy is their characteristic feature. Two characteristic interfacial tensions and two dilational viscosities are predicted depending on the director orientation. In addition six interfacial shear viscosities arise as the directors sample the velocity, velocity gradient, and vorticity directions. Finally the theory provides for the necessary theoretical tools needed to describe the interfacial dynamics of nematic polymer interfaces, such as capillary instabilities, Marangoni flows, and wetting phenomena.     

Disruption of viscoelastic beta-lactoglobulin surface layers at the air-water interface by nonionic polymeric surfactants

Nonequilibrium interfacial layers formed by competitive adsorption of beta-lactoglobulin and the nonionic triblock copolymer PEO99-PPO65-PEO99 (F127) to the air-water interface were investigated in order to explain the influence of polymeric surfactants on protein film surface rheology and foam stability. Surface dilatational and shear rheological methods, surface tension measurements, dynamic thin-film measurements, diffusion measurements (from fluorescence recovery after photo bleaching), and determinations of foam stability were used as methods. The high surface viscoelasticity, both the shear and dilatational, of the protein films was significantly reduced by coadsorption of polymeric surfactant. The drainage rate of single thin films, in the presence of beta-lactoglobulin, increased with the amount of added F127, but equilibrium F127 films were found to be thicker than beta-lactoglobulin films, even at low concentration of the polymeric surfactant. It is concluded that the effect of the nonionic triblock copolymer on the interfacial rheology of beta-lactoglobulin layers is similar to that of low molecular weight surfactants. They differ however in that F127 increases the thickness of thin liquid films. In addition, the significant destabilizing effect of low molecular weight surfactants on protein foams is not found in the investigated system. This is explained as due to long-range steric forces starting to stabilize the foam films at low concentrations of F127.     

Salt effects on the dilational viscoelasticity of surfactant adsorption layers

Interfacial rheology of adsorbed layers of surfactants, demonstrating the response of the interface to interfacial deformations, plays a key role in formation and stability of foams and emulsions. It also provides insights into complex surfactant systems in different applications, in particular, medical treatments and diagnostics. The response of the interface is mainly determined by the composition of a surfactant system, the equilibrium and kinetic adsorption properties of the included surface-active compounds and their interaction within the adsorption layer. The subject of ongoing investigations is interfacial rheology of surfactant layers in the presence of inorganic ions. Although these ions have no surface activity, they can strongly influence the interfacial rheological properties owing to their interaction with the surface-active molecules.This work aims to present recent developments in the interfacial rheology of surfactant adsorbed layers at liquid–fluid interfaces in the presence and absence of salts, highlighting the state of the art of experimental and theoretical works in this area. We highlight drawbacks of recently developed techniques for measuring dilational interfacial properties of surfactant layers, compared with previous techniques. Moreover, this review shows the dearth of research on the ion-specific effect on the interfacial rheology of surfactant layers. This demonstrates the necessity of further investigation of the effect of ion specificity on interfacial viscoelasticity.     

短链烷基对多取代烷基苯磺酸盐界面性质的影响

利用悬挂滴方法研究了2,5-二乙基-4-壬基苯磺酸钠(292)、2,5-二丙基-4-壬基苯磺酸钠(393)和2,5-二丁基-4-壬基苯磺酸钠(494)在空气-水表面和正癸烷-水界面的扩张流变性质,考察了时间、界面压、工作频率及体相浓度对扩张弹性和粘性的影响。研究发现,在低表面活性剂浓度条件下,表面吸附膜类似弹性膜,其强度由膜内分子的相互作用决定;高浓度下体相与表面间的扩散交换过程控制表面膜的性质。油分子的插入导致界面吸附分子之间相互作用的削弱,扩散交换过程主导界面膜性质;但随着短链烷基长度增加,油分子的影响变小。表面膜的强度在吸附达到平衡前已经决定,而界面膜在吸附饱和后仍然随界面分子重排而变化。     

Effect of Demulsifier Structures on the Interfacial Dilational Properties of Oil–Water Films

The dilational properties of a branch-shaped polyether-type nonionic demulsifier (PEB), a comb-shaped polyether-type nonionic demulsifier (PEC), and a star-shaped polyether-type nonionic demulsifier (PES) at the decane–water interfaces were investigated by Langmuir trough method through oscillating barrier and interfacial tension relaxation methods, which are mainly in the influences of oscillating frequency and bulk concentration on dilational properties. Meanwhile, the effect of demulsifiers on interfacial dilational modulus of diluted crude oil was also explored. The experimental results indicate that all demulsifiers can decrease the dilational modulus of diluted crude oil at the experimental concentration. The addition of PEB causes the dilational modulus of crude oil to be lower than that at the water–decane interface. The demulsifier PEC has a similar effect with PES to influence the interfacial film of crude oil: at low concentration, the dilational modulus of mixed interfacial film is lower than that of demulsifier alone, while at high concentration, the dilational modulus of mixed interfacial film is slightly higher than that of demulsifier alone. The dependence of static modulus on the bulk concentration is consistent with the trend of interfacial dilational modulus with concentration for demulsifiers PEB, PEC, and PES. The studies about the structure modulus show that the new demulsifiers PEC and PES have a stronger ability than branch-shaped demulsifier PEB to destroy the interfacial film.     

Interfacial rheological studies of gelatin-sodium dodecyl sulfate complexes adsorbed at the air-water interface

The dilational rheological behavior of gelatin molecules adsorbed at the air-water interface has been studied as a function of sodium dodecyl sulfate (SDS) concentration for a 7 wt % gelatin-SDS solution at 40 degrees C. Binding of SDS molecules to the gelatin strands disrupts the cross-linked network structure of adsorbed gelatin molecules and results in a reduction of the surface elastic modulus of the adsorbed layer that continues until the bulk SDS concentration reaches 1 mM. Beyond this SDS concentration, the dilational rheological properties of the adsorbed gelatin layer are indistinguishable from those of pure SDS adsorbed layers.     

Surfactant-mediated formation of alginate layers at the water-air interface

The self-organization process of polysaccharide alginate with different cationic surfactants at the water-air interface was investigated over a wide concentration regime. The changes of surface properties determined by surface tension measurements, surface rheology, and X-ray reflectivity are correlated with changes of bulk properties measured by turbidity, light scattering, and zeta potential measurements. We demonstrate that the interactions between the alginate and cationic surfactants result in significant changes of bulk and interfacial properties. The results of surface shear experiments point to the existence of highly viscoelastic interfacial films. In combination with X-ray reflectivity, we demonstrate that these rheological features are related to polymer-surfactant associations at the interface. In the regime of high surfactant concentrations, we observed the existence of multilayer structures.     

Effect of binding of an oligomeric cationic fluorosurfactant on the dilational rheological properties of gelatin adsorbed at the air-water interface

The effect of binding of an oligomeric cationic fluorooxetane surfactant on the interfacial properties of adsorbed gelatin-fluorooxetane complexes has been studied using dynamic surface tension and dilational rheological measurements. Adsorption kinetics of gelatin-fluorooxetane complexes are reminiscent of a mixed (barrier/diffusion limited) process, while the dilational rheological properties of the interface exhibit a strong dependence on surfactant concentration. At low surfactant concentrations, dilational surface moduli as well as phase angles are relatively insensitive to the presence of the fluorooxetane. However, at the critical aggregation concentration of the polymer-surfactant system, there is a sharp increase in the complex modulus. Further increase in the fluorooxetane concentration does not significantly affect the complex modulus. The phase angle, however, does increase with increasing fluorooxetane concentration due to the transport of bound fluorooxetane from the subsurface to the solution-air interface. These results indicate that, at fluorooxetane concentrations exceeding the critical aggregation concentration, the polymer-surfactant complexes adsorb to form cross-linked multilayers at the solution-air interface.     

聚醚类破乳剂的界面扩张流变性质

采用悬挂滴方法研究了不同结构聚醚类破乳剂与煤油间的界面张力及界面扩张流变性质. 结果表明, 4种聚醚类破乳剂均具有较强的降低界面张力能力, 且支链化程度越低分子在界面上排列越紧密, 直线型破乳剂在低浓度条件下界面张力最低. 破乳剂的分子尺寸较大, 慢弛豫过程控制界面膜性质, 吸附膜以弹性为主. 同时, 柔性聚氧乙烯链和聚氧丙烯链对界面膜性质的影响较大, 随着支链化程度增大, 界面分子间相互作用增强, 界面膜弹性增强, 黏性降低.     

Rheological parameters of protein interfacial layers as a criterion of the transition from stable emulsions to microemulsions

Proteins are considered as surface active substances. On the basis of experimentally measured rheological parameters of interfacial layers, protein accumulation at an interface between two immiscible liquids, isotherms of interfacial tension, accounting theoretical ideas elaborated for multicomponent systems, the formation of interfacial layers was referred to phase transition. The property of proteins to stabilise emulsions supposedly is connected with the formation of middle phases of lamellar structure. The correlation between elastic properties of interfacial layers and a phase transition of the middle phase upon addition of salts or lipids has been shown. Lipids being added as cosurfactants lead to the transition from lamellar to other structures, which does not provide emulsion stabilisation.     

Finite system size effects in the interfacial dynamics of binary liquid films

We study the relaxation dynamics of capillary waves in the interface between two confined liquid layers by means of molecular dynamics simulations. We measure the autocorrelations of the interfacial Fourier modes and find that the finite thickness of the liquid layers leads to a marked increase of the relaxation times as compared to the case of fluid layers of infinite depth. The simulation results are in good agreement with a theoretical first-order perturbation derivation, which starts from the overdamped Stokes' equation. The theory also takes into account an interfacial friction, but the difference with no-slip interfacial conditions is small. When the walls are sheared, it is found that the relaxation times of modes perpendicular to the flow are unaffected. Modes along the flow direction are relatively unaffected as long as the equilibrium relaxation time is sufficiently short compared to the rate of deformation. We discuss the consequences for experiments on thin layers and on ultralow surface tension fluids, as well as computer simulations.