Interactions between59Fe (14C)EDTA and soils containing calcium carbonate

Interaction between FeEDTA and calcareous soils was followed over a period of four weeks using a radiotracer technique, and a kinetic evaluation of the results was performed.⁵⁹Fe served to determine the quantity of iron,¹⁴C to assay for EDTA and⁴⁵Ca to measure calcium. During the experiment, i. e. within four weeks in case of the chernozem soil 61% and in case of the clayey meadow soil 51% of the iron chelate dissapeared from the solution. The loss in soluble iron was partly due to a rapid sorption process of about an hour and partly due to the slow decomposition of FeEDTA to Fe(OH)₃. The two processes could be separated using the Christiansen equation.     

Increasing the sensitivity of delta13C and delta15N abundance measurements by a high sensitivity elemental analyzer connected to an isotope ratio mass spectrometer

A common elemental analyzer system connected to a temperature-controlled gas chromatography (GC) column and coupled to an isotope ratio mass spectrometer was improved to decrease the determination limit for a simultaneous stable isotope ratio measurement of nitrogen and carbon dioxide. The additional use of a special ashtray system to collect the combustion residuals permitted more time-efficient work. These modifications to the elemental analyzer allowed precise measurements to be made down to 1.5 microg nitrogen and 10 microg carbon for stable isotope analysis. Low system background values and an acceptable signal-to-noise ratio have made an additional blank correction for these low sample measurements unnecessary. We provide a precision of this stable isotope analysis for lowest amounts of 1.2-2 microg nitrogen with a standard deviation of +/-0.496 per thousand (n = 27) and for 8.2-15 microg carbon with a standard deviation of +/-0.257 per thousand (n = 31) across different sample runs under stipulated conditions. This application can be established in an automatic mode without cryofocusing procedures.     

The development of nuclear microprobe techniques for the spatial determination of13C and13C/12C ratios

Sensitive and selective nuclear reaction methods have been sought for the nuclear microprobe measurement of the spatial distributions of¹³C and¹³C/¹²C ratios. The¹³C(α, n)¹⁶O reaction, with neutron detection, is the most selective for¹³C, and has a sensitivity of ca. 100 ppm. The reactions¹³C(d, p)¹⁴C and¹²C(d, p)¹³C, with proton detection, are the most sensitive for the simultaneous measurement of¹³C and¹²C, with detection limits of 30 and 2 ppm respectively. Less sensitive alternative reaction pairs are;¹³C(³He, p)¹⁵N and¹²C(³He, p)¹⁴N;¹³C(d, nγ)¹⁴N and¹²C(d, pγ)¹³C;¹³C(³He, pγ)¹⁵N and¹²C(³He, pγ)¹⁴N. The conditions governing their use, particularly light element interferences, are detailed.     

Determination of 13C abundance in trace amounts of plant metabolites by the infrared 13CO2 analyzer

The infrared 13CO2 analyzer was improved to measure the 13C abundance in the trace amounts of plant metabolites separated by high performance liquid chromatography (HPLC). To improve the sensitivity to 12C, the range of wave number of 2 360 +/- 10 cm-1 was used for 12C determination. Free carbohydrates in corn leaves fed 13CO2 were separated by HPLC and the 13C abundances in sucrose, glucose and fructose were determined by this improved method. The samples containing 10-40 micrograms of carbon could be successfully analysed.     

Isotopic ((13)C) analysis of dissolved organic carbon in stream water using an elemental analyzer coupled to a stable isotope ratio mass spectrometer

A technique for measurement of the stable isotope composition of dissolved organic carbon (DOC) in stream water, using an elemental analyzer (EA) coupled to an isotope ratio mass spectrometer (IRMS), is described. Stream water samples were concentrated by rotary evaporation, acidified to remove dissolved inorganic carbon (DIC), and dried in silver cups prior to analysis. Precision was evaluated with standards (alanine and humic acid), and with stream water samples with varying (13)C enrichment. Standards and samples were also prepared in sealed quartz tubes for high-temperature combustion (HTC) and analyzed by dual inlet for comparison. The delta(13)C values of natural abundance standards and samples measured by the two techniques differed by 相似文献   

Industrial applications of high-resolution solid-state 13C NMR techniques

High-resolution solid-state ¹³C NMR is a versatile, non-destructive technique that is useful for the characterization of intractable solids. The NMR experiment provides a unique combination of structural and dynamic information that can be related to the chemical and physical properties of solid materials.     

碳酸钙固硫固体进样测汞仪快速测定硫化铅精矿中汞

在使用固体进样测汞仪直接测定硫化铅精矿中汞时,由于试样中硫含量通常较高(高达30%以上),在测定过程中大量的硫被氧化会污染甚至腐蚀固体进样测汞仪的核心部件催化管,导致催化管寿命严重缩短。为解决该问题,建立碳酸钙固硫-固体进样测汞仪直接测定硫化铅精矿中汞的分析方法;并对Ca/S比,分解温度,分解时间,齐化时间等参数进行优化。在最优条件下,Hg的含量在2~20 ng和20~500ng线性范围内回归系数(R²)分别为0.9996和0.9998;方法检出限(LOD)为0.006 μg/g。用该法对3个典型样品进行测定,相对标准偏差RSD≤9%(n=7),加标回收率为96%~106%。该方法简单、快捷,准确度和精密度高,适合硫化铅精矿中汞的快速测定。     

Effects of microscale calcium carbonate and nanoscale calcium carbonate on the fusion,thermal, and mechanical characterizations of rigid poly(vinyl chloride)/calcium carbonate composites

A Haake torque rheometer equipped with an internal mixer has been used to study the influence of microscale calcium carbonate (micro‐CaCO₃) and nanoscale calcium carbonate (nano‐CaCO₃) on the fusion, thermal, and mechanical characteristics of rigid poly(vinyl chloride) (PVC)/micro‐CaCO₃ and PVC/nano‐CaCO₃ composites, respectively. The fusion characteristics discussed in this article include the fusion time, fusion temperature, fusion torque, and fusion percolation threshold (FPT). The fusion time, fusion temperature, and FPT of rigid PVC/calcium carbonate (CaCO₃) composites increase with an increase in the addition of micro‐CaCO₃ or nano‐CaCO₃. In contrast, the fusion torque of rigid PVC/CaCO₃ composites decreases with an increase in the addition of micro‐CaCO₃ or nano‐CaCO₃. The results of thermal analysis show that the first thermal degradation onset temperature (T_onset) of rigid PVC/micro‐CaCO₃ is 7.5 °C lower than that of PVC. Meanwhile, the glass‐transition temperature (T_g) of rigid PVC/micro‐CaCO₃ is similar to that of PVC. However, T_onset and T_g of PVC/nano‐CaCO₃ composites can be increased by up to 30 and 4.4%, respectively, via blending with 10 phr nano‐CaCO₃. Mechanical testing results for PVC/micro‐CaCO₃ composites with the addition of 5–15 phr micro‐CaCO₃ and PVC/nano‐CaCO₃ composites with the addition of 5–20 phr nano‐CaCO₃ are better than those of PVC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 451–460, 2006     

Comparison of the role of photon and neutron activation analyses for elemental characterization of geological,biological and environmental materials

The potential of photon activation analysis (PAA) for multielement trace analysis can hardly compare with that of neutron activation analysis (NAA). However, PAA appears superior over NAA for the determination of a number of elements, namely C, N, O, F, Mg, Si, Ca, Ti, Ni, Sr, Y, Zr, Nb, Sn, Tl and Pb in geological, environmental and biological materials. Most of these and other elements can be determined using nondestructive, instrumental PAA (IPAA), especially in geological materials. The possibilities of IPAA for multielement analysis using photoexitation and other photonuclear reactions are reviewed and compared with those of instrumental NAA (INAA), namely for geological materials. The need for and usefulness of radiochemical PAA (RPAA) procedures are also discussed.     

Carbon isotope analyses of cellulose using two different on-line techniques (elemental analysis and high-temperature pyrolysis)--a comparison

Even though the recent development in on-line methods for the stable isotope determination in cellulose has led to a significant increase in sample throughput and decrease in sample preparation expenditure, there still is a large potential for optimizing the analytical procedures by simultaneously measuring the isotope ratios of two or even more elements. Therefore, the main objective of this study was to answer the question whether high-temperature pyrolysis (HTP) is a suitable and reliable technique for the determination of the carbon isotopic composition of cellulose simultaneously during the well-known conventional oxygen isotope analysis. This study shows that HTP of cellulose is a technique that can produce reasonable delta(13)C values, matching the requirements of most research problems related to paleoclimatology. The reproducibility of the delta values for (13)C/(12)C is better than 0.2 per thousand. Some deficiencies of the method are related to the incomplete conversion of the organic carbon in the sample to carbon monoxide. A clear isotope effect seems to be related to the non-statistical conversion of the carbon in the cellulose to CO. The extent of this effect appears to be controlled by the relative proportion of crystallized and amorphous matter in the cellulose structure. Those deficiencies can be eliminated by using an appropriate normalization and by applying the principles of identical treatment for reference materials and samples. In general, a very good agreement is achieved for carbon isotope values determined by HTP and elemental analysis (EA).     

Composite phospholipid-calcium carbonate microparticles: influence of anionic phospholipids on the crystallization of calcium carbonate

The synthesis and characterization of calcium carbonate microparticles by reaction of calcium chloride and ammonium bicarbonate in the presence of negatively charged phospholipid mixtures of negative and zwitterionic phospholipids has been reported. Negatively charged phospholipids influence the crystal morphology of calcium carbonate and induce the formation of thermodynamically less stable veterite polymorph as opposed to calcite polymorph. The phospholipids are entrapped in the calcium carbonate microparticles during the crystallization process, with a uniform distribution of phospholipids in the interior of the microparticles. This phenomenon was exploited to encapsulate a model hydrophobic fluorophore, the tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) dichloride complex, to simulate encapsulation of hydrophobic drug molecules. Thermogravimetric analysis reveals that, in these microparticles, the calcium carbonate and the phospholipid exhibit strong interactions.     

13C NMR and electron spin resonance analyses of the radical polymerization of diisopropyl itaconate

Radical polymerizations of dialkyl itaconates were performed in benzene at 50 °C. The ¹³C NMR spectra of the obtained polymers indicated that intramolecular chain‐transfer reaction had taken place more frequently in the polymerizations of itaconates with bulkier ester groups as follows: isopropyl (i‐Pr) > n‐butyl (n‐Bu) ≈ ethyl (Et) > methyl (Me). In addition to the ¹³C NMR analysis, an electron spin resonance (ESR) analysis was conducted for polymerizations of diisopropyl itaconate, the ESR spectra of which consisted of two kinds of resonances due to the radicals with different conformations. It was assumed that the difference in conformation was attributable to the stereosequences near the propagating chain end because the relative intensity ratios of the resonances varied with the magnitude of the intramolecular chain‐transfer reaction, which was accompanied by a decrease in the syndiotacticity of the obtained poly(diisopropyl itaconate)s. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4513–4522, 2002     

Inhibition of trypsin by carbobenzyloxylysyl chloromethyl ketone: 13C NMR and x-ray diffraction analyses of the enzyme-inhibitor complex

Comparison of the X-ray diffraction data and both solution and solid (CPMAS) NMR spectra for the covalent adduct of trypsin and carbobenzyloxylysyl chloromethyl ketone provides unequivocal evidence that the serine-195 hydroxyl group of the enzyme forms a covalent bond with the carbonyl group of the bound inhibitor. This result provides important correlation of solution and solid-state geometry in such adducts.     

Compleximetric determination of calcium in impure calcium carbonate and limestone

Calcium is determined in impure calcium carbonate and limestone samples by titrating with 0.01 M disodium EGTA at pH 12 in the presence of at least 0.6 mg of magnesium and a maximum of 500 μg of iron(III), using a pH 12.5 sodium hydroxide-potassium cyanide-sodium sulfide buffer and Calcon indicator. The results of such titrations are compared with those obtained by titrating at pH 10 the calcium perchlorate solutions derived from calcium oxalate, and with those of a modified LEWIS AND MELNICK method. The results for magnesium (% MgO) obtained by difference are in fair agreement. Magnesium can be titrated compleximetrically as magnesium perchlorate, but the reagent blank must be determined.     

Proton and carbon-13 chemical shifts: Comparison between theory and experiment

A series of ab initio ¹H and ¹³C NMR chemical shifts are presented for all molecules for which gas-phase experimental measurements exist. Quantitative agreement with this large set of data is achieved by the use of gauge-invariant atomic orbitals in an SCF perturbation theory approach. The effect of basis set completeness on these ¹H and ¹³C chemical shifts is also examined. The 4-31G basis set is found to provide internally consistent results and give satisfactory agreement with gas-phase experimental data. Errors within 6% for ¹H shifts and 3% for ¹³C shifts result. Increasing the basis set to the 6-31G^* level does not significantly improve the agreement. For ¹H shifts only, the 3-21G basis set is adequate. The validity of the particular computational approach employed here is further substantiated by comparison to another ab initio magnetic shielding method.     

碳酸钙微米球的制备与表征

采用醋酸钙和碳酸钠为原料,在反应温度为5℃和柠檬酸三钠质量百分浓度为15%的条件下,采用沉淀法合成出了粒度为1～4μm、分散性好的球形碳酸钙粉体。用扫描电子显微镜(SEM)、X射线衍射仪(XRD)、红外光谱仪(IR)、原子力扫描探针显微镜(ASPM)、光学显微镜、粒度分析仪等对样品进行了表征,并用光学显微镜跟踪考察了碳酸钙微米球的形成过程。结果表明,碳酸钙微米球是由大量纳米级颗粒组装而成。