Palladium-catalyzed intermolecular alpha-arylation of zinc amide enolates under mild conditions

The intermolecular alpha-arylation and vinylation of amides by palladium-catalyzed coupling of aryl bromides and vinyl bromides with zinc enolates of amides is reported. Reactions of three different types of zinc enolates have been developed. The reactions of aryl halides occur in high yields with isolated Reformatsky reagents generated from alpha-bromo amides, with Reformatsky reagents generated in situ from alpha-bromo amides, and with zinc enolates generated by quenching lithium enolates of amides with zinc chloride. This use of zinc enolates, instead of alkali metal enolates, greatly expands the scope of amide arylation. The reactions occur at room temperature or 70 degrees C with bromoarenes containing cyano, nitro, ester, keto, fluoro, hydroxyl, or amino functionality and with bromopyridines. Moreover, the reaction has been developed with morpholine amides, the products of which are precursors to ketones and aldehydes. The arylation of zinc enolates of amides was conducted with catalysts bearing the hindered pentaphenylferrocenyl di-tert-butylphosphine (Q-phos) or the highly reactive, dimeric, Pd(I) complex [[P(t-Bu)3]PdBr]2.     

Efficient Negishi coupling reactions of aryl chlorides catalyzed by binuclear and mononuclear nickel-N-heterocyclic carbene complexes

We describe the first nickel-N-heterocyclic carbene catalyzed Negishi cross-coupling reaction of a variety of unactivated aryl chlorides, heterocyclic chlorides, aryl dichlorides, and vinyl chloride. The mononuclear and binuclear nickel-NHC complexes supported by heteroarene-functionalized NHC ligands are found to be highly efficient for the coupling of unactivated aryl chlorides and organozinc reagents, leading to biaryls and terphenyls in good to excellent yields under mild conditions. For all aryl chlorides, the binuclear nickel catalysts show activities higher than those of mononuclear nickel complexes because of possible bimetallic cooperative effect.     

Vinyl aryl ethers from copper-catalyzed coupling of vinyl halides and phenols

A general procedure for vinyl aryl ether bond formation by direct coupling of vinyl halides and phenols under mild Ullmann-type reaction conditions has been developed. Using copper chloride as the catalyst and cesium carbonate as the base, vinyl bromides or iodides were reacted with phenols in refluxing toluene to produce vinyl aryl ethers in good to excellent yields.     

One-pot near-ambient temperature syntheses of aryl(difluoroenol) derivatives from trifluoroethanol

Difluoroalkenylzinc reagents prepared from 1-(2'-methoxy-ethoxymethoxy)-2,2,2-trifluoroethane and 1-(N,N-diethylcarbamoyloxy)-2,2,2-trifluoroethane at ice bath temperatures underwent Negishi coupling with a range of aryl halides in a convenient one pot procedure. While significant differences between the enol acetal and carbamate reagents were revealed, the Negishi protocol compared very favourably with alternative coupling procedures in terms of overall yields from trifluoroethanol.     

The first general method for palladium-catalyzed Negishi cross-coupling of aryl and vinyl chlorides: use of commercially available Pd(P(t-Bu)(3))(2) as a catalyst.

With a single protocol, commercially available Pd(P(t-Bu)(3))(2) can effect the Negishi cross-coupling of a wide range of aryl and vinyl chlorides with aryl- and alkylzinc reagents. The process tolerates nitro groups, and it efficiently generates sterically hindered biaryls. In addition, a high turnover number (>3000) can be achieved.     

Palladium(0) nanoparticle catalyzed cross-coupling of allyl acetates and aryl and vinyl siloxanes

The cross-coupling of allyl acetates and aryl and vinyl siloxanes proceeds readily by the catalysis of in situ generated palladium(0) nanoparticles. The reactions are stereoselective, and (E)-coupling products are obtained both from cis and trans allyl acetates. The coupling with vinyl siloxanes provides a novel protocol for the synthesis of 1,4-pentadienes.     

Stereoselective Palladium-catalyzed Cross-coupling of (2-Amido-1-phenylpropyl)zinc Compounds with Aryl Bromides

A controllable diastereoselective C(sp²)―C(sp³) Negishi coupling reaction of secondary benzylic zinc reagents with aryl bromides to form medicinally important 2-arylphenylethylamines was demonstrated. In the presence of Pd(OAc)₂ and 2-dicyclohexylphosphino-2',6'-dimethoxybiphenyl(S-phos), open-chain(2-amido-1-phenylethyl)zinc reagent bearing a β-NHAc or NHCHO group undergoes coupling reaction to give syn-1-arylphenylethylamine mainly, whereas the zinc reagent bearing a sterically hindered β-amido group, for example NHCOC(CH₃)₂OTBS undergoes the coupling reaction to yield anti-1-arylphenylethylamines with a configuration inversion. In addition, a working mechanism for the stereoselective Negishi cross-coupling was also proposed.     

Synthesis of aryl azides and vinyl azides via proline-promoted CuI-catalyzed coupling reactions

The coupling reaction of aryl halides or vinyl iodide with sodium azide under catalysis of CuI/L-proline works at relatively low temperature to provide aryl azides or vinyl azides in good to excellent yields.     

Nickel-catalyzed intramolecular addition of vinyl or aryl bromides to ketoamides

A nickel-catalyzed intramolecular addition of vinyl or aryl bromides to ketoamides has been developed. The reactions proceeded efficiently with Ni(bpy)Br₂ as a catalyst and zinc powder as reducing agent, affording 3-hydroxypyrrolidinones, 3-hydroxyoxindoles, and dihydroquinolinones as important heterocyclic compounds in good to excellent yields.     

Zirconium-mediated Selective Synthesis of 1,4-Dialkyl(aryl)-hexa-substituted Benzenes from Two Silyl-substituted Alkynes and One Internal Alkyne

Based on the formation of 2,5-bis(trimethylsilyl)-zirconacyclopentadienes from two silylalkynes with Cp₂ZrBu₂ and the Cu-mediated formation of 1,4-disilylbenzene via the cycloaddition of zirconacyclopentadienes to disubstituted alkynes, a selective synthesis of 1,4-dialkyl(aryl)-hexa-substituted benzenes was achieved followed by iodination and coupling reaction. The coupling reactions were carried out with either organolithium reagent or organozinc reagent(Negishi coupling), depending on the electrophilic species.     

Carbonylative cross-coupling of ortho-disubstituted aryl iodides. convenient synthesis of sterically hindered aryl ketones

A mild and general protocol for the carbonylative cross-coupling of sterically hindered ortho-disubstituted aryl iodides is reported. Carbonylative Suzuki-Miyaura couplings of a variety of aryl boronic acids provide an array of substituted biaryl ketones in modest to excellent yield. A carbonylative Negishi coupling that utilizes alkynyl nucleophiles is also described.     

Photo-Oxidative Degradation of Poly(vinyl Chloride) Based Nanocomposites Under Ultraviolet Irradiation

The poly(vinyl chloride) based nanocomposites with 3.0% weight content of the photo-active zinc oxide (ZnO) nanoparticles or the photo-inert calcium carbonate (CaCO₃) nanoparticles was prepared by the solution mixing method, respectively. Their photo-oxidative degradation under ultraviolet irradiation (365 nm) at room temperature were compared with the pure poly(vinyl chloride) via Fourier transform infrared spectroscopy, Thermogravimetric analysis and x-ray photoelectron spectroscopy analyses. The results showed that the photo-inert calcium carbonate (CaCO₃) nanoparticles hampered the photo-degradation of poly(vinyl chloride), whereas the photoactive zinc oxide (ZnO) nanoparticles accelerated the photodegradation of poly(vinyl chloride). Furthermore, the ZnO nanoparticles also favored the crosslinking reaction of the dehydrochlorinated poly(vinyl chloride).     

Reaction of poly(vinyl chloride) with magnesium and grignard reagents

Reaction of poly(vinyl chloride) with magnesium under various conditions was attempted, but poly(vinyl chloride) did not react with magnesium. The reactions of poly(vinyl chloride) with benzylmagnesium chloride and allylmagnesium chloride as Grignard reagents were carried out in tetrahydrofuran at reflux temperature. It was found that the chlorine atoms in the poly(vinyl chloride) were replaced by benzyl and allyl groups by the coupling reaction, and a small amount of Grignard reagent of poly(vinyl chloride) was formed by the magnesium–halogen exchange reaction. The extent of the substitution increased with increasing reaction time and concentration of the Grignard reagent.     

Unsymmetrical diaryl sulfones and aryl vinyl sulfones through palladium-catalyzed coupling of aryl and vinyl halides or triflates with sulfinic acid salts

The palladium-catalyzed reaction of sulfinic acid salts with a wide variety of aryl and vinyl halides or triflates provides unsymmetrical diaryl sulfones and aryl vinyl sulfones in good to excellent yields. The reaction is strongly influenced by the presence of nBu4NCl, and the use of Xantphos, a rigid bidentate ligand with a wide natural bite angle, was found to be crucial for the success of the reaction. With neutral, electron-rich, and electron-poor aryl iodides best results were obtained by using Pd2(dba)3, Xantphos, Cs2CO3, and nBu4NCl, in toluene at 80 degrees C. Two general procedures were employed with aryl bromides and triflates: sodium p-toluenesulfinate, Pd2(dba)3, Xantphos, Cs2CO3, 120 degrees C, in toluene with nBu4NCl (procedure A: neutral, electron-rich, and slightly electron-poor aryl bromides or triflates) and without nBu4NCl (procedure B: electron-poor aryl bromides or triflates). With vinyl triflates best results were obtained at 60 degrees C omitting nBu4NCl.     

Highly active palladium catalysts supported by bulky proazaphosphatrane ligands for Stille cross-coupling: coupling of aryl and vinyl chlorides, room temperature coupling of aryl bromides, coupling of aryl triflates, and synthesis of sterically hindered biaryls

A family of proazaphosphatrane ligands [P(RNCH2CH2)2N(R'NCH2CH2): R = R' = i-Bu, 1; R = Bz, R' = i-Bu, 3; R = R' = Bz, 4] for palladium-catalyzed Stille reactions of aryl chlorides is described. Catalysts derived from ligands 1 and 4 efficiently catalyze the coupling of electronically diverse aryl chlorides with an array of organotin reagents. The catalyst system based on the ligand 3 is active for the synthesis of sterically hindered biaryls (di-, tri-, and tetra-ortho substituted). The use of ligand 4 allows room-temperature coupling of aryl bromides and it also permits aryl triflates and vinyl chlorides to participate in Stille coupling.     

Efficient synthesis of aryl vinyl ethers exploiting 2,4,6-trivinylcyclotriboroxane as a vinylboronic acid equivalent

The synthesis of functionalized aryl vinyl ether derivatives can be readily achieved utilizing a room-temperature copper(II) acetate mediated coupling of substituted phenols with 2,4,6-trivinylcyclotriboroxane-pyridine complex in the presence of a suitable base. The scope of the procedure was demonstrated by the generation of an array of substituted aryl vinyl ethers. The reaction was seen to be tolerant of a diverse range of functional groups yielding products in high isolated yields. We have shown that one role of an amine base in the reaction sequence is the in situ generation of an amine coordinated boroxine ring. An X-ray crystal structure and low temperature (11)B NMR study of 2,4,6-trivinylcyclotriboroxane-pyridine complex demonstrated the nature of the tetracoordinate boron species, which may have a key role to play within the reaction sequence.     

Microwave‐Assisted Heterogeneous Cross‐Coupling Reactions Catalyzed by Nickel‐in‐Charcoal (Ni/C)

A study involving the relatively rare combination of heterogeneous catalysis conducted under microwave conditions is presented. Carbon–carbon bond formation, including Negishi and Suzuki couplings, can be quickly effected with aryl chloride partners by using a base metal (nickel) adsorbed in the pores of activated charcoal. Aminations were also studied, along with cross‐couplings of vinyl alanes with benzylic chlorides as a means to stereodefined allylated aromatics. Reaction times for all these processes are typically reduced from several hours to minutes in a microwave reactor.     

Palladium-catalyzed inter- and intramolecular coupling reactions of aryl and vinyl halides mediated by indium

Treatment of aryl and vinyl halides with 50 mol % of 100 mesh indium, 2.5 mol % of Pd-C, and 1.5 equiv of LiCl under mild conditions (DMF, 100 degrees C, 1-3 h) could produce coupling products efficiently in good to excellent yields in which the C(sp2)-C(sp2) bond was formed. This reagent worked equally well with both intermolecular and intramolecular coupling reactions, producing a variety of biaryls, 1,3-dienes, and cyclic compounds.     

Ammonium Chloride Promoted Palladium-Catalyzed UIImann Coupling of Aryl Bromide

In water, ammonium chloride was found to promote palladium-catalyzed Ullmann coupling reactions of aryl bromides. In the presence of Pd/C, zinc, NH4Cl, and water, coupling of various aryl bromides was carried out smoothly to afford the corresponding homocoupling products in moderate yields.     

Palladium-catalyzed carbonylative Heck reaction of aryl bromides with vinyl ethers to 3-alkoxy alkenones and pyrazoles

Three COming together: The first carbonylative Heck coupling reaction of aryl bromides and vinyl ethers leading to 1-aryl-3-alkoxy-2-propen-1-ones has been established (see scheme). Based on this coupling methodology, a novel one-pot synthesis of aryl-substituted pyrazoles was also realized.