Synthesis and rearrangements of aminosubstituted ferra- and ruthenatricarbaboranes

A room-temperature reaction between the [7-tBuNH-nido-7,8,9-C3B8H10]- anion (1a) and [Cp*RuCl]4 leads to the ruthenatricarbollide [1-Cp*-12-tBuNH-1,2,4,12-RuC3B8H10] (2) (yield 85%). Analogously, the room-temperature photochemical reaction of 1a with [CpFe(C6H6)]PF6 gives the previously reported iron complex [1-Cp-12-tBuNH-1,2,4,12-FeC3B8H10] (3) (yield 82%). Both reactions are associated with extensive polyhedral rearrangement, which occurs under very mild conditions and brings the carbon atoms to positions of maximum separation within the framework. Compounds 2 and 3 were also surprisingly obtained via complexation of the isomeric [8-tBuNH-nido-7,8,9-C3B8H10]- (1b) anion. Complex 2 rearranges further to [1-Cp*-10-tBuNH-1,2,4,10-RuC3B8H10] (4) upon refluxing in xylene (145 degrees C). Density functional theory calculations at the B3LYP/SDD level were used to estimate relative stabilities of these metallacarborane isomers. Compounds 2 and 4, along with the 11-vertex closo compounds [1-Cp*-1,2,3,10-RuC3B7H10] (5) and [1-Cp*-10-tBuNH-1,2,3,10-RuC3B7H9] (6), were also isolated from the reaction between [Cp*RuCl2]2 and 1a in boiling xylene. The structure of 2 was established by an X-ray diffraction study, and the constitution of all compounds was determined unambiguously by multinuclear NMR spectroscopy, mass spectrometry, and elemental analyses.     

Studies on the synthesis of heterocyclic compounds. Part IV. Further investigation of the pschorr reaction with some pyrazole derivatives

Thermal decomposition of the diazonium sulfate derived from N-methyl-(1-phenyl-3-methylpyrazol-5-yl)-2-aminobenzamide afforded products formulated as 1-phenyl-3-methyl[2]benzopyrano[4,3-c]pyrazol-5-one (yield 10%), 1,4-dimethyl-3-phenylpyrazolo[3,4-c]isoquinolin-5-one (yield 10%), N-methyl-(1-phenyl-3-methylpyrazol-5-yl)-2-hydroxybenzamide (yield 8%) and 4′-hydroxy-2,3′-dimethyl-1′-phenylspiro[isoindoline-1,5′-[2]-pyrazolin]-3-one (yield 20%). Decomposition of the diazonium sulfate derived from N-methyl-(1,3-diphenylpyrazol-5-yl)-2-aminobenzamide gave products formulated as 7,9-dimethyldibenzo[e,g]pyrazolo[1,5-a][1,3]-diazocin-10-(9H)one (yield 8%), 4-methyl-1,3-diphenylpyrazolo[3,4-c]isoquinolin-5-one (yield 7%) and 4′-hydroxy-2-methyl-1′,3′-diphenylspiro[isoindoline-1,5′-[2]pyrazolin]3-one (yield 10%). The spiro compounds 6a,b underwent thermal and acid-catalysed conversion into the hitherto unknown 2-benzopyrano[4,3-c]pyrazole ring system 7a,b in good yield. Analytical and spectral data are presented which supported the structures proposed.     

One-Pot synthesis of N-heterocyclic compounds from cyclopropenethione derivatives

The one-pot reaction of 2-tert-butylthio-3-phenylcyclopropenethione (1a) and its 3-(2-thienyl) derivative (1b) with lithium pyrrolidinide at -70 degrees C, followed by methylation with methyl iodide, gives 6-methylthio-5-phenyl-2,3-dihydro-1H-pyrrolizine (2a) and its 5-(2-thienyl) derivative (2b), respectively. The reaction of 2-tert-butylthio-3-(pyrrolidin-1-yl)cyclopropenethione (1c) with phenyllithium gives also 2a in a high yield under similar conditions, and the reactions of 1a with N-lithium salts of 3-pyrroline, hexamethyleneimine, indoline, and carbazole, piperidine-potassium tert-butoxide mixture, and phenyllithium give 6-methylthio-5-phenyl-3H-pyrrolizine (3), 2-methylthio-3-phenyl-6,7, 8,9-tetrahydro-5H-pyrrolo[1,2-a]azepine (5), 6-tert-butylthio-5-methylthio-4-phenyl-1,2-dihydro-6H-pyrrolo[3,2, 1-ij]quinoline (6), 4-tert-butylthio-5-methylthio-6-phenyl-4H-pyrido[3,2,1-jk]carbazole (7), 2-methylthio-3-phenyl-5,6,7,8-tetrahydroindolizine (4), and 1-tert-butylthio-2-methylthio-3-phenylindene (9), respectively. The structures of 2a and 3 were determined by X-ray analyses of their tricarbonylchromium complexes.     

Reaction of trans-[Pt(H)2(PCy3)2] with C60 reductive elimination of H2 and formation of [Pt(PCy3)2(η-C60)]

Reaction of trans-[Pt(H)₂(PCy₃)₂], 1, with [60]fullerene at room temperature affords [Pt(PCy₃)₂(η²-C₆₀)], 2, in nearly quantitative yield. The most probable reaction pattern is the insertion of a fullerene 6,6 junction onto a Pt-H bond yielding an η¹ alkyl derivative which, after hydrogen extrusion, gives 2. On the other hand, addition of 1 to different electron-deficient olefins, such as dimethyl maleate and fumarate, furnishes mixtures of both η¹ metal—alkyl and η² metal—olefin derivatives. If tetrachloroethylene is used as 2π component, trans-[PtCl(H)(PCy₃)₂] forms exclusively.     

阿佐昔芬的合成

以4-溴苯乙酮为起始原料,经溴化、与3-甲氧基苯硫酚缩合、分子内环合得6-甲氧基-2-(4-溴苯基)苯并[b]噻吩(5);5经溴化、氧化反应后,与4-[2-(1-哌啶基)乙氧基]苯酚缩合制得关键中间体3-{4-[2-(1-哌啶基)乙氧基]苯氧基}-6-甲氧基-2-(4-溴苯基)苯并[b]噻吩亚砜(7);7再经还原、脱甲...     

14C-labeling of bromobutide, 2-bromo-3,3-dimethyl-N-(alpha, alpha-dimethylbenzyl)butyramide

Bromobutide, a novel herbicide, was labeled with carbon-14 independently at the carbonyl group and the phenyl ring for use in metabolic studies. 14C-Carbonation of neopentylmagnesium chloride (3) gave 3,3-dimethyl[1-14C]butyric acid (4a) quantitatively. Chlorination of 4a with thionyl chloride followed by alpha-bromination with bromine yielded 2-bromo-3,3-dimethyl[1-14C]-butyryl halide (5a), which was subsequently condensed with alpha, alpha-dimethylbenzylamine (6a) to afford [carbonyl-14C]bromobutide (1a). The overall yield of 1a was 76% from barium [14C]-carbonate (2). Similarly, condensation of alpha, alpha-dimethyl[phenyl-14C]benzylamine (6b), which was prepared from alpha-methyl[phenyl-U-14C]styrene (7) in three steps, with 2-bromo-3,3-dimethylbutyryl halide (5b) gave [phenyl-14C]bromobutide (1b) in 67% yield after purification. The specific activities of 1a and 1b were 1.38 and 0.781 GBq/mmol (37.2 and 21.1 mCi/mmol), respectively.     

Metal complexes of sterically hindered pyrzolylpyridines. The single crystal X-ray structure of [Cu(L)2]BF4 (L = 1-{pyrid-2-yl}-3-{2′,5′-dimethoxyphenyl}pyrazole)

Reaction of potassium 3{5}-(3′,4′-dimethoxyphenyl)pyrazolide with 2-bromopyridine in diglyme at 130°C for 3 days followed by an aqueous quench, affords 1-{pyrid-2-yl}-3-{3′,4′-dimethoxyphenyl}pyrazole (L²) in 69% yield after recrystallization from hot hexanes. Complexation of [Cu(NCMe)₄]BF₄ by 2 molar equivalents of 1-{pyrid-2-yl}-3-{2′,5′-dimethoxyphenyl}pyrazole (L¹) or L² in MeCN at room temperature, followed by concentration and crystallisation with Et₂O, gives [Cu(L)₂]BF₄ L = L¹, L²) in good yields. Treatment of AgBF₄ with L¹ or L² in MeNO₂ similarly gives [Ag(L)₂]BF₄ L = L¹, L²); reaction of AfBF₄ with L² in MeCN gives a product of stoichiometry [Ag(L²)(NCMe)]BF₄. The ¹H NMR spectra of the [M(L)₂]BF₄ complexes show peaks arising from a single coordinated environment. The single crystal X-ray structure of [Cu(L¹)₂]BF₄ shows a tetrahedral complex cation with Cu---N = 2.011(8), 2.036(8), 2.039(8), 2.110(8) Å. The Cu^I centre is close to tetrahedral, the dihedral angle between the least-squares planes formed by the Cu atom and the N donor atoms of the two ligands being 88.3(3)°. Complexation of hydrated Cu(BF₄)₂ by L² in MeCN at room temperature yields [Cu(L₂)₂](BF₄)₂. The cyclic voltammograms of the three Ag^I complexes in MeCN/0.1 M Bu₄ⁿ NPF₆ are suggestive of extensive ligand dissociation in this solvent.     

(6R,7R)-7-氨基-3-[2-(4-甲基-5-噻唑)乙烯基]-8-氧代-5-硫-1-氮杂双环[4.2.0]辛-2-烯-2-羧酸的合成

以1-磺丁基-3-甲基咪唑硫酸氢盐离子液体(b)为反应介质,7-氨基头孢烷酸(7-ACA,2)为原料,与4-甲基-5-甲酰基噻唑经缩合反应制得(6R,7R)-7-氨基-3-[2-(4-甲基-5-噻唑)乙烯基]-8-氧代-5-硫-1-氮杂双环[4.2.0]辛-2-烯-2-羧酸(7-ATCA,1),其结构经1H NMR,13C NMR和IR表征。考察了离子液体及其用量,原料摩尔比r[n(4-甲基-5-甲酰基噻唑)∶n(2)],反应温度和反应时间对1收率的影响。在最佳反应条件[b为反应介质,b用量为20 m L,r=1.3,于65℃反应5 h]下,1收率可达90%以上。     

Macrocycle-supported titanium complexes with chelating imido ligands: analogues of ansa-metallocenes

Reactions of 1,4-dimethyl-1,4,7-triazacyclononane (L1a) and 1,4-diisopropyl-1,4,7-triazacyclononane (L1b) to form 1-aminopropyl-4,7-di-R-1,4,7-triazacyclononane [R = Me (H2L3a) or Pri (H2L3b)] and 1-(2-aminobenzyl)-4,7-di-R-1,4,7-triazacyclononane [R = Me (H2L5a) or Pri (H2L5b)] are reported. Reaction of H2L3a and H2L5a with [Ti(NMe2)2Cl2] gives the ansa-linked macrocycle-imido complexes [Ti(kappa 4-L3a)Cl2] (5a) and [Ti(kappa 4-L5a)Cl2] (6a), respectively, and NHMe2. Reaction of H2L3a with [Ti(NBut)Cl2(py)3] gives [Ti(NBut)(kappa 3-H2L3a)Cl2] (7), which possesses a pendant alkylamine group that does not undergo amine/tert-butylimido group exchange to give 5a and ButNH2. However, reaction of H2L3b and H2L5b with [Ti(NBut)Cl2(py)3] does give amine/tert-butylimido group exchange to form [Ti(kappa 4-L3b)Cl2] (5b), [Ti(kappa 4-L5b)Cl2] (8b), and ButNH2. The compounds 5a,b and 6a,b are isolobal analogues of group 4 ansa-metallocene complexes and relatives of titanium cyclopentadienyl-amido constrained geometry olefin polymerization catalysts. Reaction of 5b with AgOTf affords [Ti(kappa 4-L3b)(OTf)Cl] (8) as the major product, the crystal structure of which has been determined. Alkylation of 6b by RLi gives the dialkyl derivatives [Ti(kappa 4-L5b)(R)2] [R = Me (9) or CH2SiMe3 (10)]. The ethylene polymerization capability of the compounds 5a,b, 6a,b, and 10 in the presence of methylaluminoxane has been determined and compared to that of [Ti(NBut)(kappa 3-L1a,b)Cl2] (11a,b); in all instances, low yields of high-molecular-weight polymer are obtained.     

An investigation of Staudinger reactions involving cis-1,3,5-triazidocyclohexane and tri(alkylamino)phosphines

The reaction of 1,3,5-cis-triazidocyclohexane with the electron-rich tris(dialkylamino)phosphines P(NMe(2))(3) (1) and N(CH(2)CH(2)NMe)(3)P (2b) in acetonitrile for 3 h furnished the corresponding tris-phosphazides 1,3,5-cis-(R(3)PN(3))(3)C(6)H(9), 3a (R(3)P = 1) and 3b (R(3)P = 2b), in 90% and 92% yields, respectively. The same reaction with the relatively electron-poor tris(dialkylamino)phosphine MeC(CH(2)NMe)(3)P (4) for 2 days gave the tris-iminophosphorane, 1,3,5-cis-(R(3)PN)(3)C(6)H(9), 5a (R(3)P = 4), in 60% yield. Compound 3b is a thermally stable solid that did not lose dinitrogen when refluxed in toluene for 24 h or when heated as a neat sample at 100 degrees C /0.5 Torr for 10 h. By contrast, tris-phosphazide 3a decomposed to the tris-iminophosphorane 1,3,5-cis-(R(3)PN)(3)C(6)H(9), 5b (R(3)P = 1), in 3 h in quantitative yield upon heating to 100 degrees C in toluene. Factors influencing the formation of the phosphazides or the iminophosphoranes in these reactions are discussed. The reaction of 3b with 4 equiv of benzoic acid gave [N(CH(2)CH(2)NMe)(3)P=NH(2)]PhCO(2) ([6bH]PhCO(2)) in quantitative yield along with benzene (56% yield) and dinitrogen. The same reaction with 3a gave [(Me(2)N)(3)P=NH(2)]PhCO(2) ([7aH]PhCO(2)) (quantitative yield), benzene (15% yield), and dinitrogen(.) Treatment of [6bH]PhCO(2) with KO(t)Bu afforded N(CH(2)CH(2)NMe)(3)P=NH (6b) in 40% overall yield. Compound 6b upon treatment with PhCH(2)CH(2)Br produced [6bH]Br in 90% yield along with styrene. The new compounds were characterized by analytical and spectroscopic methods, and selected compounds (3b, 5a, and [6bH]Br) were structured by X-ray crystallography. A special feature of 3b is its capability to function as a starting material for 6b, which was not accessible by other synthetic routes.     

Synthesis and reactions of ethyl 3-acetyl-8-cyano-6,7-dimethylpyrrolo[1,2-a]pyrimidine-4-carboxylate and related compounds

The reactions of 3-acetyl-4-ethoxycarbonyl- or 3,4-diethoxycarbonylpyrrolo[1,2-a]pyrimidine derivatives 7a,b , which were prepared by condensation of the 2-aminopyrrole ( 4 ) with ethyl 3-ethoxymethylene-2,4-dioxovalerate ( 5a ) or ethyl ethoxymethyleneoxaloacetate ( 5b ), with diazomethane are described. Thus, reaction of 7a , with diazomethane gave ethyl 2a-acetyl-7-cyano-2a,3a-dihydro-5,6-dimethyl-3H -cyclopropa[e]pyrrolo[1,2-a]pyrimidine-3a-carboxylate ( 11 ) in 74% yield, which was readily transformed into the 1-pyrrol-2-yl-pyrrole ( 18 ) by treatment with potassium hydroxide. On the other hand, reaction of 7b with diazomethane afforded three products whose structures were assigned as diethyl 7-cyano-2a,3a-dihydro-5,6-dimethyl-3H-cyclopropa[e]pyrrolo[1,2-a]pyrimidine-2a,3a-carboxylate ( 20 ), 6-cyano-7,8-dimethyl-3a,3b,5,9a-tetrahydro-4H -aziridino[c]-1H or 3H-pyrazolo[3,4-e]pyrrolo[1,2-a]pyrimidine-3a,9a-dicarboxylates ( 21,22 ). Ring Transformation of 20 to 25 was not observed.     

Part 1: Synthesis of Polyfused Heterocyclic Systems Derived From 3-Phenyl-5,6,7,8-tetrahydro[1,2,4]triazolo[3,4- b ][1,3,4]thiadiazepine-6,8-dione

3-Phenyl-5,6,7,8-tetrahydro[1,2,4]triazolo[3,4- b ][1,3,4]thiadiazepine-6,8-dione ( 1 ) was condensed with o -aminothiophenol, 2-amino-ethanol or cystamine to afford compounds 2-4 respectively. Treatment of compound 1 with dimethylthiomethylenemalononitrile yielded the corresponding pyrano[3,2- f ][1,2,4]triazolo[3,4- b ]-[1,3,4]thiadiazepine derivative 5 . 7-[5-Amino-1,3-dithiolan-2-ylidene]-3-phenyl-5,6,7,8-tetrahydro[1,2,4]triazolo[3,4- b ][1,3,4]thiadiazepine-6,8-dione ( 6 ) was obtained by treating compound 1 with CS 2 and chloroacetonitrile. Thiation of compound 1 gave the corresponding thioanalog 7 , which in turn was condensed with malononitrile to give 3-phenyl-5,6,7,8-tetrahydro[1,2,4]triazolo[3,4- b ][1,3,4]thiadiazepine-6-one-8-ylidenemalononitrile ( 8 ). On treating compound 8 with benzaldehyde or p -nitrobenzaldehyde, pyrano[1,2,4]triazolo[1,3,4]thiadiazepin derivatives 9a , b , respectively, were obtained. Compound 8 was treated with CS 2 and methyl iodid to give the corresponding dithiomethylmethylene derivative 10 which was subjected to react with aniline to give pyrido[1,2,4]triazolo[1,3,4]thiadiazepine derivative 11 . Compound 8 was treated with 3-aminopyridine, o -aminothiophenol, or o -phenylenediamene to yield compounds 12 and 13a , b respectively. Finally, tertiary amines or activated phenols were condensed with compound 8 to yield compounds 14 and 15a , b respectively.     

Bidentates versus monodentates in asymmetric hydrogenation catalysis: synergic effects on rate and allosteric effects on enantioselectivity

C 1-Symmetric phosphino/phosphonite ligands are prepared by the reactions of Ph 2P(CH 2) 2P(NMe 2) 2 with ( S)-1,1'-bi-2-naphthol (to give L A ) or ( S)-10,10'-bi-9-phenanthrol (to give L B ). Racemic 10,10'-bi-9-phenanthrol is synthesized in three steps from phenanthrene in 44% overall yield. The complexes [PdCl 2( L A,B )] ( 1a, b), [PtCl 2( L A,B )] ( 2a, b), [Rh(cod)( L A,B )]BF 4 ( 3a, b) and [Rh( L A,B ) 2]BF 4 ( 4a, b) are reported and the crystal structure of 1a has been determined. A (31)P NMR study shows that M, a 1:1 mixture of the monodentates, PMePh 2 and methyl monophosphonite L 1a (based on ( S)-1,1 '-bi-2-naphthol), reacts with 1 equiv of [Rh(cod) 2]BF 4 to give the heteroligand complex [Rh(cod)(PMePh 2)( L 1a )]BF 4 ( 5) and homoligand complexes [Rh(cod)(PMePh 2) 2]BF 4 ( 6) and [Rh(cod)( L 1a ) 2]BF 4 ( 7) in the ratio 2:1:1. The same mixture of 5- 7 is obtained upon mixing the isolated homoligand complexes 6 and 7 although the equilibrium is only established rapidly in the presence of an excess of PMePh 2. The predominant species 5 is a monodentate ligand complex analogue of the chelate 3a. When the mixture of 5- 7 is exposed to 5 atm H 2 for 1 h (the conditions used for catalyst preactivation in the asymmetric hydrogenation studies), the products are identified as the solvento species [Rh(PMePh 2)( L 1a )(S) 2]BF 4 ( 5'), [Rh(S) 2(PMePh 2) 2]BF 4 ( 6') and [Rh(S) 2( L 1a ) 2]BF 4 ( 7') and are formed in the same 2:1:1 ratio. The reaction of M with 0.5 equiv of [Rh(cod) 2]BF 4 gives exclusively the heteroligand complex cis-[Rh(PMePh 2) 2( L 1a ) 2]BF 4 ( 8), an analogue of 4a. The asymmetric hydrogenation of dehydroamino acid derivatives catalyzed by 3a, b is reported, and the enantioselectivities are compared with those obtained with (a) chelate catalysts derived from analogous diphosphonite ligands L 2a and L 2b , (b) catalysts based on methyl monophosphonites L 1a and L 1b , and (c) catalysts derived from mixture M. For the cinnamate and acrylate substrates studied, the catalysts derived from the phosphino/phosphonite bidentates L A,B generally give superior enantioselectivities to the analogous diphosphonites L 2a and L 2b ; these results are rationalized in terms of delta/lambda-chelate conformations and allosteric effects of the substrates. The rate of hydrogenation of acrylate substrate A with heterochelate 3a is significantly faster than with the homochelate analogues [Rh( L 2a )(cod)]BF 4 and [Rh(dppe)(cod)]BF 4. A synergic effect on the rate is also observed with the monodentate analogues: the rate of hydrogenation with the mixture containing predominantly heteroligand complex 5 is faster than with the monophosphine complex 6 or monophosphonite complex 7. Thus the hydrogenation catalysis carried out with M and [Rh(cod) 2]BF 4 is controlled by the dominant and most efficient heteroligand complex 5. In this study, the heterodiphos chelate 3a is shown to be more efficient and gives the opposite sense of optical induction to the heteromonophos analogue 5.     

Novel Complexes of 3-[3-(1H-Imidazol-1-yl)propyl]-3,7-diaza-bispidines and β-Cyclodextrin as Coatings to Protect and Stimulate Sprouting Wheat Seeds

We report the syntheses and characterization of novel 3,7-bicycl[3.3.1]bispidines possessing an imidazolpropyl group attached to N-3, and at N-7 a Boc group, as well as a benzoylated-oximated group at C-9. These compounds were complexed with β-cyclodextrin [β-CD] and evaluated as seed protectors of selected wheat seedlings. Using strong acid, condensations of N-substituted piperidones with the appropriate imidazolpropyl groups at N-3 and N-7 led to bispidinones 6 and 7. These intermediates were reduced to the corresponding 3,7-diazabicyclo[3.3.1]nonane targets. The oxime at C-9 was benzoylated to yield 13. Heating these 3,7-diazabicyclo[3.3.1]nonanes in ethanol with β-CD generated the complexes required. We investigated the ability of such complexes as coatings on seedlings to protect and stimulate growth of three varieties of wheat, namely Kazakhstanskaya-10, Severyanka, and Miras. The complex of 3-[3-(1H-imidazol-1-yl)propyl]-7-(3-methoxypropyl)-3,7-diazabicyclo[3.3.1]nonane (2) promoted growth in the root systems of all three wheat varieties by more than 30% in Kazakhstanskaya-10, 30% in Severyanka and 8.5% in Miras. A complex of 3-Boc-7-[3-(1H-imidazol-1-yl)propyl]-3,7-diazabicyclo[3.3.1]nonane (9) increased both shoot and root length in only the Severyanka variety. The complex of 3-(3-butoxypropyl)-7-[3-(1H-imidazol-1-yl)propyl]-3,7-diazabicyclo[3.3.1]nonane (11) stimulated both shoot growth (0.8%, 12.3%, 13.5%) and root growth (12.3%, 9.4%, 21.7%) in all three varieties of wheat, respectively. The nature of substituents on the bispidine affect the activity. Solid complexes (1:1) were generated as powders which melted above 240 °C (dec) and were characterized via elemental analyses as 1:1 complexes.     

Fine-tuning of metallaborane geometries: chemistry of iridaboranes derived from the reaction of

From reaction of [(Cp*Ir)2HxCl(4-x)] (x=1, 0) and LiBH4, arachno-[[Cp*IrH2]B3H7](1) is produced in moderate yield concurrently with [Cp*IrH4]. In contrast, reaction of [(Cp*Ir)2H2Cl2] with LiBH4 results in arachno-[[Cp*IrH]2(mu-H)B2H5] (3) in high yield at room temperature but a mixture of 1 and [[Cp*IrH]2(mu-H)BH4] (2) at 0 degrees C. BH3 x THF converts 1 to arachno-[(Cp*IrHB4H9] (4) and 2 to 3 with 1 as a minor product. Further, reaction of 3 with excess of BH3 x THF results in formation of nido-[[Cp*Ir]2-(mu-H)B4H7] (6) formed by loss of H2 from the intermediate arachno-[[Cp*IrH]2B4H8] (5). Reaction of 1 with [Co2(CO)8] permits the isolation of two metallaboranes, arachno-[[Cp*Ir(CO)]-B3H7] (7) and nido-[1-[Cp*Ir]-2,3-Co2-(CO)4(mu-CO)B3H7] (8). Treatment of 4 with [Co2(CO)8] gives only one single mixed-metal metallaborane nido-[1-[Cp*Ir]-2-Co(CO)3B4H7 (9) in high yield. Finally, pyrolysis of 8 results in loss of hydrogen and formation of pileo-[1-[Cp*Ir]-2,3-Co2(CO)5B3H5] (10) with a BH-capped square-pyramidal structure. With kinetic control rational synthesis of a variety metallaboranes has been achieved by varying the number of chlorides in the monocyclopentadienylmetal halide dimer, reaction temperature, types of monoborane, and metal fragment sources.     

Direct synthesis of (imine)platinum(II) complexes by iminoacylation of ketoximes with activated organonitrile ligands

The metal-mediated iminoacylation of ketoximes R1R2C=NOH (1a R1 = R2 = Me; 1b R1 = Me, R2 = Et; 1c R1R2 = C4H8; 1d R1R2 = C5H10) upon treatment with the platinum(II) complex trans-[PtCl2(NCCH2CO2Me)2] 2a with an organonitrile bearing an acceptor group proceeds under mild conditions in dry CH2Cl2 to give the trans-[PtCl2{NH=C(CH2CO2Me)ON=CR1R2}2] 3a-d isomers in moderate yield. The reaction of those ketoximes with trans-[PtCl2(NCCH2Cl)2] 2b under the same experimental conditions gives a 1 : 1 mixture of the isomers trans/cis-[PtCl2{NH=C(CH2Cl)ON=CR1R2}2] 3e-h and 4e-h in moderate to good yield. These reactions are greatly accelerated by microwave irradiation to give, with higher yields (ca. 75%), the same products which were characterized by IR and 1H, 13C and 195Pt NMR spectroscopies, FAB-MS, elemental analysis for the stable trans isomers, and X-ray diffraction analysis (3f). The diiminoester ligand in 3a was liberated upon reaction of the complex with a diphosphine.     

Ein beitrag zur darstellung und reaktivität der η-allyliridium-komplexe [Ir(η-2-RC3H4) (PPr3)2]

The η³-allyliridium complexes [Ir(η³-2-RC₃H₄)(PⁱPr₃)₂] (2, 3) have been prepared in a one-pot reaction from [IrCl(C₂H₄)₂]₂, 2-RC₃H₄Li and PⁱPr₃ in 70% yield. Compounds 2 and 3 react spontaneously with H₂ to give [IrH₅(PⁱPr₃)₂] (7) and with excess PhC=CH and MeCCH to give [Ir(CCPh)₃(PⁱPr₃)₂] (5) and [Ir(CCMe)₂(CMe=CH₂)(PⁱPr₃)₂] (6), respectively. From 2 (or 3) and two equivalents of PhCCH the complex [IrH(CCPh)₂(PⁱPr₃)₂] (4) has been obtained. Treatment of 2 or 3 with CF₃CO₂H does not lead to a cleavage of the allyl-metal bond but affords the allyl(hydrido)-iridium(III) complexes [IrH(η³-2-RC₃H₄)(η¹-P₂CCF₃)(PⁱPr₃)₂] (8, 9) in almost quantitative yield.     

Rhodium phosphine complexes immobilized on silica as active catalysts for 1-hexene hydroformylation and arene hydrogenation

In immobilizing the rhodium complexes [Rh(acac)(CO)(P)] (1) and [Rh(acac)(P)₂] (2) (P = Ph₂PCH₂CH₂Si(OMe)₃) onto SiO₂, acetylacetone is found to be released through protonation of the acac ligand by the acidic silica-OH groups. The resulting complexes [Rh(O-{SiO₂}(HO-{SiO₂})(CO)(P-{SiO₂})] (1a) and [Rh(O-{SiO₂})(HO-{SiO₂})(P-{SiO₂})₂] (2a) were successfully tested with respect to their catalytic action on 1-hexene hydroformylation as well as benzene and toluene hydrogenation. The reaction outcome, viz. the formation of aldehydes versus isomerization, depends strongly on the presence and concentration of a phosphine co-catalyst. Thus, while 1a gave only a 17% yield of aldehyde in the absence of phosphines, the yield is increased to 54% in the presence of phosphinated silica P-{SiO₂} or even 94% if PPh₃ is added to the solution. Without extra added phosphine, both 1a and 2a effect mainly the isomerization of 1-hexene to 2-hexene. Pre-catalyst 1a catalyzes also the hydrogenation of benzene at 10.5 atm H₂ and 90 °C to give cyclohexane with a TOF of 608 h⁻¹.     

Synthesis of amidolanthanides with new chiral biaryl-based NNO ligands and their use as catalysts for enantioselective hydroamination/cyclization

A new series of amidolanthanides have been prepared from the reactions between Ln[N(SiMe3)2]3 and the chiral NNO ligands, (S)-2-(pyrrol-2-ylmethyleneamino)-2'-hydroxy-6,6'-dimethyl-1,1'-biphenyl (2H2) and (S)-5,5',6,6',7,7',8,8'-octahydro-2-(pyrrol-2-ylmethyleneamino)-2'-hydroxy-1,1'-binaphthyl (3H2), which are synthesized from the condensation of pyrrole-2-carboxaldehyde with 1 equiv of (S)-2-amino-2'-hydroxy-6,6'-dimethyl-1,1'-biphenyl or (S)-5,5',6,6',7,7',8,8'-octahydro-2-amino-2'-hydroxy-1,1'-binaphthyl, in the presence of molecular sieves at 70 degrees C, respectively. Treatment of 2H2 with 1 equiv of Ln[N(SiMe3)2]3 (Ln=Sm, Yb) in toluene under reflux, followed by recrystallization from a toluene solution, gives the dimeric amido complexes, {2-SmN(SiMe3)2}2.0.5C7H8 (6.0.5C7H8) and {2-YbN(SiMe3)2} 2.1.5C7H8(8.1.5C7H8), in good yields. While under similar reaction conditions, the reaction of 2H2 with 1 equiv of Y[N(SiMe3)2]3 leads to the isolation of a mixture of {2-YN(SiMe3)2}2 (7a) and {(2)2Y}Y[N(SiMe3)2]2(7b) in 82% total yield; the reaction of 3H2 with 1 equiv of Ln[N(SiMe3)2]3 (Ln=Y, Yb) gives the trinuclear complexes, {(3)2Ln}2LnN(SiMe3) 2.1.5C7H8 (Ln=Y(9.1.5C7H8), Yb(10.1.5C7H8)), in good yields. All compounds have been characterized by various spectroscopic techniques and elemental analyses. The solid-state structures of compounds 2H2 and 6- 10 have been further confirmed by X-ray diffraction analyses. Complexes 6- 9 are active catalysts for the asymmetric hydroamination/cyclization of aminoalkenes, affording cyclic amines in good yields with moderate ee values.