Retracted: A Facile Synthetic Route to New Fluorinated Building‐Blocks of 1‐Fluoroalkynes and 1‐Fluorodiynes

A facile and direct fluorination process of alkynes and diynes was developed. In the presence of n‐butyllithium, the reaction of a series of terminal alkynes and diynes with the electrophilic fluorinating reagent (NFSI) proceeded to afford various 1‐fluoroalkynes and 1‐fluoro‐1,3‐diynes in moderate to high yields.     

An efficient synthesis of diynes using (diacetoxyiodo)benzene

A novel and facile method for synthesis of symmetrical conjugated diynes, using (diacetoxyiodo)benzene as oxidant under palladium-catalyzed conditions is presented, in which diynes are prepared in good yields in a short period of time at room temperature.     

端基炔烃的简单快速二聚反应

端基炔烃在无钯催化剂的条件下, 以乙腈为溶剂, 三乙胺为碱, 与氯化亚铜和二醋酸碘苯反应, 常温下短时间内得到高产率的二聚产物, 提供了一个简单快速合成共轭二炔烃的新方法. 比较了反应条件, 并提出了可能的反应机理.     

Effective synthesis of aryl ethers and coumaranones employing the palladium-catalyzed enyne-diyne

Alkyl-, alkoxy-, and aryloxy-substituted conjugated enynes 1 in the presence of Pd(PPh(3))(4) catalyst smoothly underwent the regiospecific [4 + 2] cycloaddition reaction with conjugated alkyl- and alkoxy-substituted symmetric diynes 2 to give multisubstituted aryl ethers 3 in good to high yields. Benzannulation of enynes 1d-g with unsymmetric diyne 6, possessing alkyl and alkoxy groups at acetylenic terminii, in most cases produced an aromatic product 8 with an alkoxy group of diyne attached to the ethynyl moiety of the aromatic product. Remarkably, alkoxy-substituted diynes 2c and 6 underwent the benzannulation reaction with 1 at an unusually low temperature of 0 degrees C! One-pot consecutive benzannulation of alkyl-substituted enynes 1d,e and alkoxy-substituted enynes 1f,g with alkoxy-substituted diynes 2c and 6 followed by protonolysis with TsOH afforded coumaranones 9a-c and 10 in reasonable to high overall yields.     

Synthesis of Unsymmetrical 1,3‐Diynes via Pd/Cu‐Catalyzed Cross‐Coupling of Terminal Alkynes at Room Temperature

A facile and practical synthetic route of unsymmetrical 1,3‐diynes via the PdCl/CuI catalyzed oxidative coupling of two different terminal alkynes has been developed by using 3‐(diphenylphosphino)propanoic acid as a ligand in the presence of oxygen. This system is suitable for not only aromatic alkynes but also heteroaromatic and aliphatic alkynes which were transformed into the corresponding unsymmetrical 1,3‐diynes in moderate to good yields at room temperature. Moreover, the unsymmetrical 1,3‐diynes were also obtained on a multi‐gram scale. Mechanistic studies suggest that oxygen plays a key role in the catalytic cycles.     

Rhodium-catalyzed selective [2+2+2] cyclizations of 1,6-diynes with monoynes leading to isoindolines and isobenzofurans

<正>A highly efficient and selective[2+2+2]cyclization of diynes and monoalkynes was catalyzed by rhodium under room temperature in water/THF mixed solvent,affording isoindolines and isobenzofurans in good to excellent yields.The center atoms (N,O) in the diynes showed a significant effect for the cyclization.     

Synthesis of diynes and tetraynes from in situ desilylation/dimerization of acetylenes

[reaction: see text]. An efficient method for the in situ desilylation/oxidative dimerization of (trialkylsilyl)acetylenes is described. This protocol avoids the complications encountered with sensitive diynes by eliminating the deprotection and isolation steps. Various aromatic and alkyl diynes and tetraynes can be synthesized in a straightforward manner in good yields (82-99%) from TIPS-protected acetylenes. This method facilitates the efficient synthesis of novel tetrayne-bridged acetylenic cyclophanes 6 and 7 in a direct manner.     

Efficient nickel-catalyzed [2 + 2 + 2] cycloaddition of CO2 and diynes

A mild and general route for preparing 2-pyrones from CO2 and diynes is described. Under only 1 atm of CO2, excellent yields of pyrone are obtained using catalytic amounts of Ni(COD)2 and imidazolylidene ligand, IPr. In addition, stoichiometric reactions between the isolated complex Ni(IPr)2, diynes, and CO2 suggest that the pathway involves initial reaction with CO2 as the key step.     

An in situ approach for nickel-catalyzed cycloaddition

A convenient method for preparing pyridines from air-stable, commercially available catalyst precursors is described. The addition of n-BuLi to Ni(acac)2 and an NHC salt (such as IPr.HCl or SIPr.HCl) rapidly generates an active Ni0/NHC catalyst for the cycloaddition of diynes and nitriles that affords pyridines without a decrease in observed yields. The in situ method also converts diynes and carbon dioxide to the corresponding pyrones.     

A facile photoinduced iodoperfluoroalkylation of dienes, diynes, and enynes with perfluoroalkyl iodides via selective radical cyclization

Perfluoroalkyl iodides serve as excellent mediators for the radical cyclization of dienes, diynes, and enynes upon irradiation with near-UV light, providing the corresponding iodoperfluoroalkylated cyclic compounds in moderate to good yields.     

Sequential alkynylation of ω-bromoalkyl triflates: facile access to unsymmetrical non-conjugated diynes including precursors to diene pheromones

Sequential treatment of ω-bromoalkyl triflates with an alkynyllithium at 0 °C followed by addition of a second alkynyllithium and NaI and heating the reaction mixture provides a simple one-pot access to unsymmetrical diynes in good yields. These diynes may be transformed stereoselectively into diene pheromones such as (Z,Z)- and (E,Z)-3,13-octadecadienyl acetate.     

Synthesis of Spirocyclic C‐Arylglycosides and ‐Ribosides by Ruthenium‐Catalyzed Cycloaddition

Spirocyclic C‐arylglycosides were synthesized from the appropriately protected δ‐gluconolactones. Addition of lithium acetylide followed by glycosylation with 3‐(trimethylsilyl)propargyl alcohol converted the δ‐gluconolactones into silylated diynes. After desilylation, subsequent ruthenium‐catalyzed cycloaddition of the resultant diynes with alkynes or chloroacetonitrile gave spirocyclic C‐arylglycosides in good yields and selectivity. This strategy was also extended to the synthesis of spirocyclic C‐arylribosides from the known γ‐ribonolactone derivative. Moreover, silver‐catalyzed iodination of the sugar diynes followed by ruthenium‐catalyzed cycloaddition with acetylene delivered spirocyclic C‐iodophenylglycosides and ‐ribosides, which were subjected to palladium‐catalyzed C? C bond‐forming reactions and copper‐catalyzed coupling with nitrogen heterocycles to lead to various derivatives.     

CuI‐catalyzed homocoupling of terminal alkynes to 1,3‐diynes

A simple and efficient protocol for CuI‐catalyzed oxidative homocoupling reaction of terminal alkynes to symmetrical 1,4‐disubstituted 1,3‐diynes was reported. The reaction can be carried out in the open air, using NaOAc as a base in the absence of any other additives. A variety of terminal alkynes were converted to the corresponding 1.3‐diynes in good to excellent yields without any side product formation. Copyright © 2010 John Wiley & Sons, Ltd.     

Ligand-Free Synthesis of 1,4-Disubstituted-1,3-diynes by Iron/Copper Cocatalyzed Homocoupling of Terminal Alkynes

A simple and efficient protocol for Fe/Cu cocatalyzed oxidative homocoupling reaction of terminal alkynes to symmetrical 1,4‐disubstituted‐1,3‐diynes was presented. The results showed that both CuBr and FeCl₃ played crucial roles in the reaction. It is noteworthy that this protocol employs mild, efficient, aerobic and ligand free conditions. The alkynes, including aromatic, heteroaromatic and aliphatic alkynes, were transformed into the corresponding 1,3‐diynes in good to excellent yields.     

Unexpected Adsorption Capacity of Ca-deficient Hydroxyapatite in Oil/water System

Symmetrical diynes were synthesized by ligand‐free copper‐catalyzed homocoupling reaction of 1,1‐dibromo‐1‐alkenes using a DBU/DMSO system at room temperature in good to excellent yields dot.^?1.     

Synthesis and transformations of metallacycles 36. Cycloalumination of macrocyclic diacetylenes with Et<Subscript>3</Subscript>Al catalyzed by Cp<Subscript>2</Subscript>ZrCl<Subscript>2</Subscript>

Cycloalumination of macrocyclic diynes with Et₃Al catalyzed by Cp₂ZrCl₂ resulted in unsaturated bi- and tricyclic mono- and dialuminacarbocycles in 76–91% yields.     

An alternative CuCl–piperidine‐catalyzed oxidative homocoupling of terminal alkynes affording 1,3‐diynes in air

CuCl with the use of a catalytic amount of piperidine as additive shows high catalytic activity for the oxidative homocoupling reactions of terminal alkynes in toluene at 60 °C in air to afford 1,3‐diynes in high yields. Copyright © 2009 John Wiley & Sons, Ltd.     

Nickel-catalyzed cocyclotrimerization of arynes with diynes; a novel method for synthesis of naphthalene derivatives

The NiBr2(dppe)-Zn system effectively catalyzes the [2 + 2 + 2] cocyclotrimerization of arynes with diynes, leading to substituted naphthalene derivatives in moderate to good yields. This cocyclotrimerization reaction shows excellent tolerance of functional groups and leads to products of 5- to 7-membered fused-ring sizes.     

Synthesis of cyclophanes via an intermolecular Pd-catalyzed enyne-diyne cross-benzannulation approach

Several novel types of cyclophanes were efficiently synthesized via an intermolecular palladium-catalyzed cross-benzannulation of cyclic enynes and diynes. These types of cyclophanes are not accessible through an intramolecular mode of the homo-benzannulation protocol, reported previously. Cyclic reactants (enynes and diynes) were readily prepared in reasonable yields from commercially available materials using known procedures. The fact that the cyclic Z-enyne 29, in contrast to its E-counterpart, underwent benzannulation to produce the cyclophane 28 brought additional support for the necessity of having an E-hydrogen atom at the terminal olefin moiety of nonactivated enynes, which was found previously in the benzannulation of the acyclic substrates.     

Cobalt(III)-catalyzed cycloaddition polymerization of diynes with nitriles: Synthesis of polymers containing pyridine moieties in the main chain

The synthesis of pyridine-containing polymers was carried out by the cycloaddition of diynes with nitriles in the presence of organocobalt complexes as catalysts. As a model experiment, the pyridine-formation reaction of monofunctional acetylenes with nitriles was reexamined in detail in the presence of organocobalt catalysts, from which the combination of terminal aliphatic acetylenes and aromatic nitriles was proved to be suitable for the specific pyridine-formation process. On the basis of this result, the polymerization of terminal aliphatic diynes with aromatic nitriles was carried out in the presence of the cobalt catalyst (10 mol %) to give polymers containing substituted pyridine moieties in the main chain in high yields. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1979–1986, 1999