Synthesis of thiazolines and thiazolidines

Primary -ethynylamines form thiazolines with isothiocyanates, while secondary -ethynylamines give thiazolidines. Data on the IR, PMR, and UV spectra of the compounds obtained are presented.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 471–474, April, 1972.     

Synthesis of thiazolines by the reaction of aryl ketonitriles with cysteamine via microwave irradiation

Thiazolines were synthesized in a one‐pot reaction in excellent yield using a newly developed methodology. Ketonitriles were directly condensed with cysteamine (2‐amino‐thioalcohol) via microwave irradiation at 210°C for 10 minutes under solvent free conditions and without any solid support. All the compounds were characterized by ¹H nmr, ¹³C nmr spectroscopy and elemental analyses.     

Synthesis and structure of dithioester stabilised pyridinium ylides

An improved procedure to prepare dithioester stabilised pyridinium ylides is described. The structure of the products is discussed.     

Synthesis of heterocyclic monomers via Reissert chemistry

The chemistry of Reissert compounds has been used to synthesize activated difluorotetraketone monomers containing two coupled isoquinolyl moieties, linked at either the 1,1′‐ or 4,4′‐positions. These monomers offer routes to novel families of poly(heteroarylene ether)s. New 4,4′‐coupled bis(Reissert compound) 9 containing 4,4′‐diketo moieties failed to afford the desired difluorotetraketo monomer upon attempted rearrangement. However, analogous bis(Reissert compound) 19 containing 4,4′‐dibenzyl units did so, via aldehyde condensation, hydrolysis of the intermediate ester and oxidation of the four benzylic moieties to keto groups; thus the novel difluorotetraketone monomer 10 was prepared. Novel bis(Reissert compound)s 24 , 28 , and 35 were synthesized from diacid chlorides and 4‐(p‐fluorobenzyl)isoquinoline. Rearrangement of 24 to the diketone 29 , followed by oxidation of the 4‐benzyl moieties resulted in difluorotetraketone monomer 30 containing a 1,1′‐linked bisisoquinoline. The 1,1′‐linked bis(isoquinolylfluorodiketo) monomer 38 , isomeric with 10 , was prepared from 4‐(p‐fluorobenzyl) Reissert compound 36 by condensation with terephthaldehyde, ester hydrolysis to diol 37 , and oxidation. In the course of this effort, a number of new isoquinoline Reissert compounds were synthesized as model systems. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3856–3867, 2010     

Synthesis of functionalized bisphosphonates via click chemistry

An efficient general synthetic approach giving the possibility for facile, rapid and cheap access to a wide range of novel nitrogen-bisphosphonates (N-BPs) as potent drug candidates, based on the reaction of mono- and bis-propargyl-substituted bisphosphonates with a variety of azides under Cu(i) catalysis ("click" methodology), has been developed. The method allows the incorporation of two functionalities into the N-BP molecule simultaneously, as well as to ligate in situ two N-BPs to one another via the one-pot reaction of organic dibromides with propargyl-substituted bisphosphonates, generating both the diazide and Cu(I) moieties.     

Industrial chemistry and chemoecology are linked together to realize a modern and sustainable chemistry

Meeting society's needs without damaging the environment requires new ways of thinking. The link of industrial chemistry and chemoecology will be one of the key factors of sustainable development within the chemicals industry.     

Industrial chemistry and chemoecology are linked together to realize a modern and sustainable chemistry

The main directions of Natural Products Chemistry in the Third Millennium are summarized.     

Synthesis of linked heterocycles via use of bis-acetylenic compounds

Linked bis-pyrazoles, a pyrazolyl-isoxazole, a pyrazolyl-pyrimidine and a pyrazolyl-triazole were synthesized starting with commercially available 1,4-bis(trimethylsilyl)-1,3-butadiyne 1 or readily available bis-acetylenic diketone 22. A stepwise approach based on the use of 1 allowed the synthesis of nonsymmetrically substituted bis-pyrazoles and linked heterocycles with two different cores whereas a symmetric approach based on the use of 22 allowed a very short synthesis of symmetric bis-pyrazoles.     

Synthesis of macrocycles by the ring‐crossover reaction of a cyclic dithioester

The ring‐crossover polymerization of cyclic dithioester 1 was performed in the presence of quaternary onium salts as catalysts at 70–150 °C for 24 h in NMP. It was found that predictable cyclic polymers with the same repeating structures as 1 were obtained with M_ns in the range between 700 and 3,500, quantitatively. It was observed that intermolecular and intramolecular thioester‐exchange reactions proceeded between cyclic monomer 1 and resulting cyclic polymers under thermodynamic control to give a lower‐molecular‐weight cyclic polymer with a lower polydispersity ratio (M_n = 2,400, M_w/M_n = 1.70). © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 680–687, 2007     

Synthesis of degradable model networks via ATRP and click chemistry

A simple scheme involving atom transfer radical polymerization (ATRP) from a bifunctional initiator, conversion of the bromine end groups of the resulting telechelic polymer to azides, and cross-linking of this azido-telechelic macromonomer with multi-acetylene functionalized small molecules via copper-catalyzed azide-alkyne cycloaddition was employed to prepare the first tert-butyl acrylate model networks. This general scheme is wide in scope, enabling synthesis of model networks possessing defined pore size from any monomer polymerizable by ATRP. Introduction of an olefin moiety into the ATRP initiator enabled degradation of the materials by ozonolysis to yield star polymer products bearing three or four arms depending on which cross-linker was employed in the parent network. Size-exclusion chromatography of the ozonolysis products confirmed the pore size of the parent network and yielded insight into the number of unreacted functionalities. Model networks derived from a trifunctional alkyne were found to be more completely cross-linked than those derived from a tetrafunctional alkyne, presumably due to less steric hindrance in the former system.     

Synthesis of an amphiphilic spiro-multiblock copolymer via thiol-ene click chemistry

A multiblock [poly(ethylene oxide)-b-spiro-polystyrene] ([(PEO-b-spiro-PS)]) copolymer with a topologically novel architecture was synthesized using thiol-ene step-growth polymerization reaction. Spiro-PS with dimercapto groups as the hard segment was synthesized in three main steps: (a) preparation of tetra-arm PS by atom transfer radical polymerization and the conversion of the chain-end group to azide functionality, (b) alkyne-azide click coupling reaction to synthesize a tricyclic PS, and (c) tactical ring opening of the tricyclic PS through disulfide/thiol redox reaction. The PEO soft segment was obtained as chain-ends modified with norbornene groups. Finally, the hydrothiolation of the highly reactive norbornene chain-ends of polyethylene glycol with the dimercapto groups of spiro-PS produced the multiblock ([(PEO-b-spiro-PS)]) copolymer in quantitative yield. The multiblock copolymer was characterized using size-exclusion chromatography, proton nuclear magnetic resonance spectroscopy, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 132–138     

Synthesis of unsymmetrical sulfamides and polysulfamides via SuFEx click chemistry

As hydrogen-bond donors and acceptors, N,N′-disubstituted sulfamides have been used in a range of applications from medicinal chemistry to anion-binding catalysis. However, compared to ureas or thioureas, the utilization of this unique moiety remains marginal, in part because of a lack of general synthetic methods to access unsymmetrical sulfamides. Specifically, polysulfamides are a virtually unknown type of polymer despite their potential utility in non-covalent dynamic networks, an intense area of research in materials science. We report herein a practical and efficient process to prepare unsymmetrical sulfamides via Sulfur(vi)-Fluoride Exchange (SuFEx) click chemistry. This process was then applied to synthesize polysulfamides. Thermal analysis showed that this family of polymers possess high thermal stability and tunable glass transition temperatures. Finally, hydrolysis studies indicated that aromatic polysulfamides could be recycled back to their constituting monomers at the end of their life cycle.

A general, practical, and efficient synthesis of N,N′-disubstituted sulfamides has been developed and applied to the preparation of polysulfamides, a virtually unknown class of polymers.     

松香基琥珀酸双酯磺酸钠的合成及性质

以松香性产品歧化松香醇聚氧乙烯醚（RP）为原料合成了非离子表面活性剂歧化松香醇聚氧乙烯醚琥珀酸双酯磺酸钠（RPS）,研究了影响RP与马来酸酐（MA）的酯化反应及酯与NaHSO,磺化反应的各种因素,得出比较适宜的反应条件：酯化反应以对-甲苯磺酸作催化剂,其用量为RP质量用量的0．3％,反应温度130-140℃,n（RP）n（MA）=2：1,反应时间4h;磺化反应温度120-130℃,n（NaHSO3）：n（双酯）=1．1：1,反应时间4h。研究了合成产物的表面物理化学性质,结果表明：随着环氧乙烷（EO）聚合度（n）的增加,表面张力、钙皂分散力、乳化力先逐渐提高,临界胶束浓度和润湿力先逐渐减小,然后趋于平衡;RPS和RP相比,乳化力,泡沫性能及润湿力均有明显提高。     

Synthesis of degradable molecular brushes via a combination of ring-opening polymerization and click chemistry

Acid-degradable molecular brushes with polycarbonate backbone and densely grafted side chains (∼1.9 SCs per backbone repeating unit) were synthesized for the first time using the grafting-onto method. Extremely efficient copper-catalyzed azide-alkyne cycloaddition click reactions between the polycarbonate backbone containing two pendant azido groups per backbone unit and alkynyl-terminated poly (methyl acrylate) (ay-PMA₇₂, average degree of polymerization DP = 72) SCs were demonstrated to finish in 10 min with a quantitative conversion of the azido groups. Similar grafting efficiencies were also achieved when using alkynyl-terminated polystyrene (ay-PS), poly(ethylene oxide) (ay-PEO), and poly (t-butyl acrylate)-b-polystyrene (ay-PtBA-b-PS) to successfully prepare molecular brushes with high grafting density (>1.8 SCs per backbone repeating unit). Under acidic condition, the polycarbonate backbones were completely degradable and the final degraded product of the molecular brushes was a linear polymer chain with molecular weight two times of the SCs. When a mixture of hydrophobic ay-PS and hydrophilic ay-PEO chains was used, amphiphilic heterobrushes PC-g-(PS-co-PEO) were synthesized, which could self-assemble into micelles or vesicles in selective solvents, depending on the ratio of the two SCs in the brush. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 239–248     

Synthesis of optically active 1,1′-binaphthyl-phthalocyanines linked via a crown ether unit

Novel optically active metal and metal-free phthalocyanines, substituted with 1,1′-binaphthyl crown ether units, have been synthesized and characterized.     

Synthesis and properties of cyclic diester based aliphatic copolyesters

Melt polycondensation was used to prepare a systematic series of random and amorphous copolyesters using the following cycloaliphatic diesters: dimethyl‐1,4‐cyclohexane dicarboxylate (DMCD), dimethyl bicyclo[2.2.1]heptane‐1,4‐dicarboxylate (DMCD‐1), dimethyl bicyclo[2.2.2]octane‐1,4‐dicarboxylate (DMCD‐2), dimethyl bicyclo[3.2.2]nonane‐1,5‐dicarboxylate (DMCD‐3), 1,4‐dimethoxycarbonyl‐1,4‐dimethylcyclohexane (DMCD‐M) and the aliphatic diols: ethylene glycol (EG) and 1,4‐cyclohexane dimethanol (CHDM). The polymer compositions were determined by nuclear magnetic resonance (NMR) and the molecular weights were determined using size exclusion chromatography (SEC). The polyesters were characterized by dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The copolyester based on DMCD‐2 was observed to have a higher glass transition temperature (T_g up to 115 °C) than the other copolyesters of this study. For poly[x(DMCD‐2)y(DMCD) 30(EG)70(CHDM)], T_g increases linearly with increase of DMCD‐2 mole content. DMA showed that all of the cycloaliphatic copolyesters have secondary relaxations, resulting from the conformational transitions of the cyclohexylene rings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2162–2169, 2010     

Tricyclic chemistry. Synthesis and chemistry of a novel polyheterocycle

The photochemical reaction of 1 with acrylonitrile gave the cyclobutane adducts II and III, which on treatment with base afforded a novel polycyclic structure IV. Reduction of IV with LAH followed by Eschweiler-Clarke methylation yielded the polyheterocyclic structure VI.     

Universal solid supports for the synthesis of oligonucleotides via a transesterification of H-phosphonate diester linkage

[Structure: see text]. Three universal solid supports exhibiting an hydroxyl function were prepared. The introduction of a first H-phosphonate diester linkage which was kept throughout the elongation allowed the release of 3'-hydroxyl oligonucleotides by a transesterification mechanism. The transesterification was performed in a few minutes with either amino alcohols or K2CO3/methanol. Starting from a hydroxyl solid support, tandem oligonucleotides were synthesized and the solid support was easily recyclable. This strategy was extended to the release of an oligonucleotide from the solid support by a nonbasic treatment opening the way to the synthesis of base-sensitive oligonucleotides thanks to the selective deprotection of a hydroxyl in beta of the H-phosphonate diester linkage.     

Functional polyisobutylenes via a click chemistry approach

1‐(ω‐Azidoalkyl)pyrrolyl‐terminated polyisobutylene (PIB) was successfully synthesized both by substitution of the terminal halide of 1‐(ω‐haloalkyl)pyrrolyl‐terminated PIB with sodium azide and by in situ quenching of quasiliving PIB with a 1‐(ω‐azidoalkyl)pyrrole. Azide substitution of the terminal halide was carried out in 50/50 heptane/DMF at 90 °C for 24 h using excess azide. The 1‐(ω‐haloalkyl)pyrrolyl‐PIB precursors included 1‐(2‐chloroethyl)pyrrolyl‐PIB, 1‐(2‐bromoethyl)pyrrolyl‐PIB, and 1‐(3‐bromopropyl)pyrrolyl‐PIB. In situ quenching involved direct addition of 1‐(2‐azidoethyl)pyrrole to quasiliving PIB initiated from 5‐tert‐butyl‐1,3‐di(1‐chloro‐1‐methylethyl)benzene (bDCC)/TiCl₄ at ?70 °C in hexane/CH₃Cl (60/40, v/v). ¹H NMR analysis of the quenched product revealed mixed isomeric end groups in which PIB was attached at either C₂ or C₃ of the pyrrole ring (C₂/C₃ = 0.40/0.60). SEC indicated the absence of coupled PIB under optimized conditions, confirming exclusive mono‐substitution on each pyrrole ring. 1‐(3‐Azidopropyl)pyrrolyl‐PIB was reacted in modular fashion with various functional alkynes, propargyl alcohol, propargyl acrylate, glycidyl propargyl ether, and 3‐dimethylamino‐1‐propyne, via a Huisgen 1,3‐dipolar cycloaddition (Click) reaction, using Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine or bromtris(triphenylphosphine)Cu(I) as catalyst. The reactions were quantitative and produced PIBs bearing terminal hydroxyl, acrylate, glycidyl, or dimethylaminomethyl groups attached via exclusively four‐substituted triazole linkages. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2533–2545, 2010