Heterogeneous or homogeneous catalysis? Mechanistic studies of the rhodium-catalyzed dehydrocoupling of amine-borane and phosphine-borane adducts

In depth, comparative studies on the catalytic dehydrocoupling of the amine-borane adduct Me(2)NH.BH(3) (to form [Me(2)N-BH(2)](2)) and the phosphine-borane adduct Ph(2)PH.BH(3) (to form Ph(2)PH-BH(2)-PPh(2)-BH(3)) with a variety of Rh (pre)catalysts such as [[Rh(1,5-cod)(micro-Cl)](2)], Rh/Al(2)O(3), Rh(colloid)/[Oct(4)N]Cl, and [Rh(1,5-cod)(2)]OTf have been performed in order to determine whether the dehydrocoupling proceeds by a homogeneous or heterogeneous mechanism. The results obtained suggest that the catalytic dehydrocoupling of Me(2)NH.BH(3) is heterogeneous in nature involving Rh(0) colloids, while that of Ph(2)PH.BH(3) proceeds by a homogeneous mechanism even when starting with Rh(0) precursors such as Rh/Al(2)O(3). The catalytic dehydrocoupling reactions are thought to proceed by different mechanisms due to a combination of factors such as (i) the greater reducing strength of amine-borane adducts, (ii) the increased ease of dissociation of phosphine-borane adducts, and (iii) phosphine ligation and/or poisoning of active catalytic sites on metal colloids.     

Catalytic dehydrocoupling of amine-borane and phosphine-borane adducts: the mechanism is heterogeneous in one case and homogeneous in the other

The catalytic dehydrocoupling reactions of Me2NH.BH3 and Ph2PH.BH3 using the rhodium precatalyst [Rh(1,5-cod)(mu-Cl)]2 were found to proceed by different mechanisms: heterogeneous involving Rh(0) metal for the former case and homogeneous for the latter.     

Linear hybrid aminoborane/phosphinoborane chains: synthesis, proton-hydride interactions, and thermolysis behavior

The reaction of the lithiated phosphine-borane adducts Li[PPhR.BH(3)] or Li[CH(2)-PR(2).BH(3)] with Me(2)NH.BH(2)Cl afforded the hybrid linear species Me(2)NH-BH(2)-PPhR-BH(3) (1, R = Ph; 2, R = H) or Me(2)NH-BH(2)-CH(2)-PR(2)-BH(3) (3, R = Ph; 4, R = Me). Single-crystal X-ray diffraction studies on 1 and 3, the first for linear hybrid aminoborane/phosphinoborane adducts, confirmed the expected four-coordinate N-B-P-B and N-B-C-P-B frameworks. In addition, interactions between the protic N-H and hydridic B-H hydrogen atoms resulted in short intermolecular H...H contacts for 1, whereas 3 was found to possess an exceptionally short intramolecular H...H distance of 1.95 A. Solution and solid state infrared studies on 3 and 4 also suggest that these dihydrogen interactions were maintained even in dilute solution. Hydrogen bond strengths in the range of 7.9 to 10.9 kJ mol(-1) indicate the presence of a relatively weak interaction. The thermal and catalytic dehydrocoupling reactivities of 1-4 were also investigated. Chain cleavage reactions were observed for 1 and 2 upon thermolysis at 130 degrees C to afford species such as Me(2)NH.BH(3), [Me(2)N-BH(2)](2), PhPRH.BH(3) (R = Ph, H), PhPRH (R = Ph, H), Ph(2)PH-BH(2)-PPh(2)-BH(3), and also the low molecular weight polyphosphinoborane [PhPH-BH(2)](n) (M(w) approximately 5000). Similar products were observed for the attempted catalytic dehydrocoupling reactions but under milder reaction conditions (50 degrees C). Thermolysis of 3 at 130 degrees C yielded the six-membered ring [BH(2)-CH(2)-PPh(2)](2) (5), which presumably results from the dissociation of Me(2)NH.BH(3) from 3. Thermolysis of 4 at 90 degrees C afforded Me(2)NH.BH(3) and Me(3)P.BH(3), in addition to a product tentatively assigned as [BH(2)-CH(2)-PMe(2)](2) (6).     

Transition metal-catalyzed dissociation of phosphine-gallane adducts: isolation of mechanistic model complexes and heterogeneous catalyst poisoning studies

Attempts to induce the catalytic dehydrocoupling of the phosphine-gallane adduct Cy2PH.GaH3 (Cy=cyclohexyl) (1) by treatment with ca. 5 mol% of either the Rh(I) complex [{Rh(mu-Cl)(1,5-cod)}2] (cod=cyclooctadiene) or the Rh(0) species Rh/Al2O3 and [Oct4N]Cl-stabilized colloidal Rh led to catalytic P-Ga bond cleavage to generate the phosphine, H2, and Ga metal. Interestingly, subsequent treatment of the reaction mixtures with Me2NH.BH3 failed to lead to the formation of [Me2N-BH2]2 via Rh-catalyzed dehydrocoupling, which suggested that catalyst deactivation was taking place. Poisoning studies involving the treatment of the active Rh(0) catalyst with Cy2PH, PMe3, or GaH3.OEt2 showed that deactivation indeed occurred as the dehydrocoupling of Me2NH.BH3 either dramatically decreased in rate or did not take place at all. The X-ray photoelectron spectroscopy analysis of colloidal Rh(0) that had been treated with Cy2PH and PMe3 confirmed the presence of phosphorus on the catalyst surface in each case, consistent with catalyst poisoning via phosphine ligation. A mechanism for the Rh-catalyzed P-Ga bond cleavage reaction of 1 and Me3P.GaH3 (2) is proposed and involves the initial reaction of Ga-H bonds with the Rh colloid surface, which weakens and ultimately breaks the P-Ga bond. The reasonable nature of this mechanism is supported by a model reaction between the zerovalent group 9 complex Co2(CO)8 and 2 which afforded Me3P.Ga[Co(CO)4]3 (3). Consistent with the elongated and thus weakened P-Ga bond in 3, solutions of this species in Et2O subsequently form the known complex [(Me3P)Co(CO)3]2 (4) and Ga metal after 4 h at 25 degrees C.     

Ambient temperature, tandem catalytic dehydrocoupling-hydrogenation reactions using Rh colloids and Me2NH.BH3 as a stoichiometric H2 source

Highly active Rh colloids, generated in situ during the catalytic dehydrocoupling of Me2NH.BH3 using [{Rh(cod)(mu-Cl)}2] as a precatalyst, are capable of efficiently hydrogenating alkenes at 25 degrees C in a one-pot procedure using only the evolved H2 from the initial dehydrocoupling reaction.     

Heterogeneous dehydrocoupling of amine-borane adducts by skeletal nickel catalysts

Skeletal Ni, produced by the selective leaching of Al from a Ni/Al alloy, has been successfully employed in the catalytic dehydrogenation of various amine-borane adducts. The combination of low cost and facile single-step synthesis make this system a potentially attractive alternative to the previously described precious metal and other first-row metal catalysts. The heterogeneous nature of the catalyst facilitates convenient product purification, and this is the first such system to be based on a first-row transition metal. Catalytic dehydrocoupling of Me(2)NH·BH(3) (1) and Et(2)NH·BH(3) (5) was demonstrated using 5 mol % skeletal Ni catalyst at 20 °C and produced [Me(2)N-BH(2)](2) (2) and [Et(2)N-BH(2)](2)/Et(2)N═BH(2) (6), respectively. The related adduct iPr(2)NH·BH(3) (7) was also dehydrogenated to afford iPr(2)N═BH(2) (8) but with significant catalyst deactivation. Catalytic dehydrocoupling of MeNH(2)·BH(3) (9) was found to yield the cyclic triborazane [MeNH-BH(2)](3) (10) as the major product, whereas high molecular weight poly(methylaminoborane) [MeNH-BH(2)](n) (11) (M(w) = 78?000 Da, PDI = 1.52) was formed when stoichiometric quantities of Ni were used. Similar reactivity was also observed with NH(3)·BH(3) (12), which produced cyclic oligomers and insoluble polymers, [NH(2)-BH(2)](x) (14), under catalytic and stoichiometric Ni loadings, respectively. Catalyst recycling was hindered by gradual poisoning. A study of possible catalyst poisons suggested that BH(3) was the most likely surface poison, in line with previous work on colloidal Rh catalysts. Catalytic dehydrogenation of amine-borane adducts using skeletal Cu and Fe was also explored. Skeletal Cu was found to be a less active dehydrogenation catalyst for amine-borane adducts but also yielded poly(methylaminoborane) under stoichiometric conditions on reaction with MeNH(2)·BH(3) (9). Skeletal Fe was found to be completely inactive toward amine-borane dehydrogenation.     

Rhodium-catalyzed dehydrocoupling of fluorinated phosphine-borane adducts: synthesis, characterization, and properties of cyclic and polymeric phosphinoboranes with electron-withdrawing substituents at phosphorus

The dehydrocoupling of the fluorinated secondary phosphine-borane adduct R2PH.BH3 (R = p-CF3C6H4) at 60 degrees C is catalyzed by the rhodium complex [{Rh(mu-Cl)(1,5-cod)}2] to give the four-membered chain R2PH-BH2-R2P-BH3. A mixture of the cyclic trimer [R2P-BH2]3 and tetramer [R2P-BH2]4 was obtained from the same reaction at a more elevated temperature of 100 degrees C. The analogous rhodium-catalyzed dehydrocoupling of the primary phosphine-borane adduct RPH2.BH3 at 60 degrees C gave the high molecular weight polyphosphinoborane polymer [RPH-BH2]n (Mw = 56,170, PDI = 1.67). The molecular weight was investigated by gel permeation chromatography and the compound characterized by multinuclear NMR spectroscopy. Interestingly, the electron-withdrawing fluorinated aryl substituents have an important influence on the reactivity as the dehydrocoupling process occurred efficiently at the mildest temperatures observed for phosphine-borane adducts to date. Thin films of polymeric [RPH-BH2]n (R = p-CF3C6H4) have also been shown to function as effective negative-tone resists towards electron beam (e-beam) lithography (EBL). The resultant patterned bars were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM) and time-of-flight secondary ion mass spectrometry (TOF-SIMS).     

Rhodium-catalyzed dehydrocoupling of the sterically encumbered phosphine-borane adduct tBu(2)PH.BH(3): synthesis of the linear dimers tBu(2)PH-BH(2)-tBu(2)P-BH(3) and tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl

The dehydrocoupling of the sterically hindered phosphine-borane adduct tBu(2)PH.BH(3) above 140 degrees C is catalyzed by the rhodium complexes [Rh(1,5-cod)(2)][OTf] or Rh(6)(CO)(16) to give the four-membered chain tBu(2)PH-BH(2)-tBu(2)P-BH(3) (1), which was isolated in 60% yield and characterized by multinuclear NMR spectroscopy, mass spectrometry, and elemental analysis. Thermolysis of 1 in the temperature range 175-180 degrees C led to partial decomposition and the formation of tBu(2)PH.BH(3). When the dehydrocoupling of tBu(2)PH.BH(3) was performed in the presence of [[Rh(mu-Cl)(1,5-cod)](2)] or RhCl(3) hydrate, the chlorinated compound tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl (2) was formed which could not be obtained free of 1. The molecular structures of tBu(2)PH.BH(3), tBu(2)PH-BH(2)-tBu(2)P-BH(3) (1), and tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl (2) together with 1 were determined by single-crystal X-ray diffraction studies.     

Synthetic and mechanistic studies of metal-free transfer hydrogenations applying polarized olefins as hydrogen acceptors and amine borane adducts as hydrogen donors

Metal-free transfer hydrogenation of polarized olefins (RR'C=CEE': R, R' = H or organyl, E, E' = CN or CO(2)Me) using amine borane adducts RR'NH-BH(3) (R = R' = H, AB; R = Me, R' = H, MAB; R = (t)Bu, R' = H, tBAB; R = R' = Me, DMAB) as hydrogen donors, were studied by means of in situ NMR spectroscopy. Deuterium kinetic isotope effects and the traced hydroboration intermediate revealed that the double H transfer process occurred regio-specifically in two steps with hydride before proton transfer characteristics. Studies on substituent effects and Hammett correlation indicated that the rate determining step of the H(N) transfer is in agreement with a concerted transition state. The very reactive intermediate [NH(2)=BH(2)] generated from AB was trapped by addition of cyclohexene into the reaction mixture forming Cy(2)BNH(2). The final product borazine (BHNH)(3) is assumed to be formed by dehydrocoupling of [NH(2)=BH(2)] or its solvent stabilized derivative [NH(2)=BH(2)]-(solvent), rather than by dehydrogenation of cyclotriborazane (BH(2)NH(2))(3) which is the trimerization product of [NH(2)=BH(2)].     

On the reactivity toward ketones of new methyl amino complexes of Rh(III) and Ag(I). Synthesis of ortho-rhodiated acetophenone methyl imine complexes

MeNH(2) reacts with silver salts AgX (2:1) to give [Ag(NH(2)Me)(2)]X [X = TfO = CF(3)SO(3) (1.TfO) and ClO(4) (1.ClO(4))]. Neutral mono(amino) Rh(III) complexes [Rh(Cp*)Cl(2)(NH(2)R)] [R = Me (2a), To = C(6)H(4)Me-4 (2b)] have been prepared by reacting [Rh(Cp*)Cl(mu-Cl)](2) with RNH(2) (1:2). The following cationic methyl amino complexes have also been prepared: [Rh(Cp*)Cl(NH(2)Me)(PPh(3))]TfO (3.TfO), from [Rh(Cp*)Cl(2)(PPh(3))] and 1.TfO (1:1); [Rh(Cp*)Cl(NH(2)R)2]X, where R = Me, X = Cl, (4a.Cl), from [Rh(Cp*)Cl(mu-Cl)]2 and MeNH2 (1:4), or R = Me, X = ClO4 (4a.ClO4), from 4a.Cl and NaClO4 (1:4.8), or R = To, X = TfO (4b.TfO), from [Rh(Cp*)Cl(mu-Cl)](2), ToNH(2) and TlTfO (1:4:2); [Rh(Cp*)(NH(2)Me)(tBubpy)](TfO)(2) (tBubpy = 4,4'-di-tert-butyl-2,2'-bipyridine, 5.TfO), from 2a, TlTfO and tBubpy (1:2:1); [Rh(Cp*)(NH(2)Me)(3)](TfO)2 (6.TfO) from [Rh(Cp*)Cl(mu-Cl)](2) and 1.TfO (1:4). 2-6 constitute the first family of methyl amino complexes of rhodium. 1 and 4a.ClO(4) react with acetone to give, respectively, the methyl imino complexes [Ag{N(Me)=CMe(2)}()]X [X = TfO (7.TfO), ClO(4) (7.ClO(4))], and [Rh(Cp*)Cl(Me-imam)]ClO(4) [8.ClO(4), Me-imam = N,N'-N(Me)=C(Me)CH(2)C(Me)(2)NHMe]. 7.X (X = TfO, ClO(4)) are new members of the small family of methyl acetimino complexes of any metal whereas 8.ClO4 results after a double acetone condensation to give the corresponding bis(methyl acetimino) complex and an aldol-like condensation of the two imino ligands. The acetimino complex [Ag(NH=CMe(2))(2)]ClO(4) reacts with [Rh(Cp*)Cl(imam)]ClO(4) [1:1, imam = N,N'-NH=C(Me)CH(2)C(Me)(2)NH(2)] to give [Rh(Cp*)(imam)(NH=CMe(2))](ClO(4))(2) (9a.ClO(4)). 8.ClO(4) reacts with AgClO(4) (1:1) in MeCN to give [Rh(Cp*)(Me-imam)(NCMe)](ClO(4))2 (9b.ClO(4)), which in turn reacts with XyNC (Xy = C(6)H(3)Me(2)-2,6) or with MeNH(2) (1:1) to give [Rh(Cp*)(Me-imam)L](ClO(4))(2) [L = XyNC (9c.ClO(4)), MeNH(2) (9d.ClO(4))]. 6.TfO reacts with acetophenone to give [Rh(Cp*){C,N-C(6)H(4)C(Me)=N(Me)-2}(NH(2)Me)]TfO (10a.TfO), the first complex resulting from such a condensation and cyclometalation reaction. In turn, 10a.TfO reacts with isocyanides RNC (1:1) at room temperature to give [Rh(Cp*){C,N-C(6)H(4)C(Me)=NMe-2}(CNR)]TfO [R = tBu (10b.TfO), Xy (10c.TfO)], or 1:12 at 60 degrees C to give [Rh(Cp*){C,N-C(=NXy)C(6)H(4)C(Me)=N(Me)-2}(CNXy)]TfO (11.TfO). The crystal structures of 9a.ClO(4).acetone-d6, 9c.ClO(4), and 10a.TfO have been determined.     

Synthesis and the thermal and catalytic dehydrogenation reactions of amine-thioboranes

A series of trimethylamine-thioborane adducts, Me(3)N·BH(2)SR (R = tBu [2a], nBu [2b], iPr [2c], Ph [2d], C(6)F(5) [2e]) have been prepared and characterized. Attempts to access secondary and primary amine adducts of thioboranes via amine-exchange reactions involving these species proved unsuccessful, with the thiolate moiety shown to be vulnerable to displacement by free amine. However, treatment of the arylthioboranes, [BH(2)-SPh](3) (9) and C(6)F(5)SBH(2)·SMe(2) (10) with Me(2)NH and iPr(2)NH successfully yielded the adducts Me(2)NH·BH(2)SR (R = Ph [11a], C(6)F(5) [12a]) and iPr(2)NH·BH(2)SR (R = Ph [11b], C(6)F(5) [12b]) in high yield. These adducts were also shown to be accessible via thermally induced hydrothiolation of the aminoboranes Me(2)N═BH(2), derived from the cyclic dimer [Me(2)N-BH(2)](2) (13), and iPr(2)N═BH(2) (14), respectively. Attempts to prepare the aliphatic thiolate substituted adducts R(2)NH·BH(2)SR' (R = Me, iPr; R' = tBu, nBu, iPr) via this method, however, proved unsuccessful, with the temperatures required to facilitate hydrothiolation also inducing thermal dehydrogenation of the amine-thioborane products to form aminothioboranes, R(2)N═BH(SR'). Thermal and catalytic dehydrogenation of the targeted amine-thioboranes, 11a/11b and 12a/12b were also investigated. Adducts 11b and 12b were cleanly dehydrogenated to yield iPr(2)N═BH(SPh) (22) and iPr(2)N═BH(SC(6)F(5)) (23), respectively, at 100 °C (18 h, toluene), with dehydrogenation also possible at 20 °C (42 h, toluene) with a 2 mol % loading of [Rh(μ-Cl)cod](2) in the case of the former species. Similar studies with adduct 11a evidenced a competitive elimination of H(2) and HSPh upon thermolysis, and other complex reactivity under catalytic conditions, whereas the fluorinated analogue 12a was found to be resistant to dehydrogenation.     

Catalytic redistribution and polymerization of diborazanes: unexpected observation of metal-free hydrogen transfer between aminoboranes and amine-boranes

Ir-catalyzed (20 °C) or thermal (70 °C) dehydrocoupling of the linear diborazane MeNH(2)-BH(2)-NHMe-BH(3) led to the formation of poly- or oligoaminoboranes [MeNH-BH(2)](x) (x = 3 to >1000) via an initial redistribution process that forms MeNH(2)·BH(3) and also transient MeNH═BH(2), which exists in the predominantly metal-bound and free forms, respectively. Studies of analogous chemistry led to the discovery of metal-free hydrogenation of the B═N bond in the "model" aminoborane iPr(2)N═BH(2) to give iPr(2)NH·BH(3) upon treatment with the diborazane Me(3)N-BH(2)-NHMe-BH(3) or amine-boranes RR'NH·BH(3) (R, R' = H or Me).     

CATALYTIC DEHYDROCOUPLING OF AMINE-BORANE ADDUCTS TO FORM AMINOBORANES AND BORAZINES

A mild, catalytic dehydrocoupling route to aminoboranes and borazine derivatives from either primary or secondary amine-borane adducts has been developed using late transition metal complexes as precatalysts. The dehydrocoupling of Me ₂ NH·BH ₃ was found to be catalyzed by 0.5 mol% [Rh(1,5-cod)(μ-Cl)] ₂ in solution at 25°C to give [Me ₂ N─BH ₂ ] ₂ (1) quantitatively after ca. 8 h. This new catalytic method was extended to other secondary adducts RR ′NH·BH ₃ which afforded the dimeric [(1,4-C ₄ H ₈ )N─BH ₂ ] ₂ (2) and [PhCH ₂ (Me)N─BH ₂ ] ₂ (3) or the monomeric aminoborane ⁱ Pr ₂ N═BH ₂ (4) under mild conditions. The catalytic dehydrocoupling of NH ₃ ·BH ₃ , MeNH ₂ ·BH ₃ , and PhNH ₂ ·BH ₃ at 45°C affords the borazine derivatives [RN─BH] ₃ (5: R = H; 6: R = Me; 7:R = Ph). TEM analysis of the contents of the reaction solution for the [Rh(1,5-cod)(μ-Cl)] ₂ catalyzed dehydrocoupling of Me ₂ NH·BH ₃ together with Hg poisoning experiments suggested a soluble heterogeneous catalyst involving Rh(0) nanoclusters.     

Probing the catalytic potential of chloro nitrosyl rhenium(I) complexes

The reduction of the mononitrosyl Re(II) salt [NMe(4)](2)[ReCl(5)(NO)] (1) with zinc in acetonitrile afforded the Re(i) dichloride complex [ReCl(2)(NO)(CH(3)CN)(3)] (2). Subsequent ligand substitution reactions with PCy(3), PiPr(3) and P(p-tolyl)(3) afforded the bisphosphine Re(i) complexes [ReCl(2)(NO)(PR(3))(2)(CH(3)CN)] (3, R = Cy a, iPr b, p-tolyl c) in good yields. The acetonitrile ligand in 3 is labile, permitting its replacement with H(2) (1 bar) to afford the dihydrogen Re(I) complexes [ReCl(2)(NO)(PR(3))(2)(η(2)-H(2))] (4, R = Cy a, iPr b). The catalytic activity of 2, 3 and 4 in hydrogen-related catalyses including dehydrocoupling of Me(2)NH·BH(3), dehydrogenative silylation of styrenes, and hydrosilylation of ketones and aryl aldehydes were investigated, with the main focus on phosphine and halide effects. In the dehydrocoupling of Me(2)NH·BH(3), the phosphine-free complex 2 exhibits the same activity as the bisphosphine-substituted systems. In the dehydrogenative silylation of styrenes, 3a and 4a bearing PCy(3) ligands exhibit high catalytic activities. Monochloro Re(I) hydrides [Re(Cl)(H)(NO)(PR(3))(2)(CH(3)CN)] (5, R = Cy a, iPr b) were proven to be formed in the initiation pathway. The phosphine-free complex 2 showed in dehydrogenative silylations even higher activity than the bisphosphine derivatives, which further emphasizes the importance of a facile phosphine dissociation in the catalytic process. In the hydrosilylation of ketones and aryl aldehydes, at least one rhenium-bound phosphine is required to ensure high catalytic activity.     

The first acetimino complexes of Rh(III). 4-imino-2-methylpentan-2-amino-Rh(III) complexes through metal-assisted intramolecular aldol-type condensation of two acetimino ligands

[Rh(Cp)Cl(mu-Cl)](2) (Cp = pentamethylcyclopentadienyl) reacts (i) with [Au(NH=CMe(2))(PPh(3))]ClO(4) (1:2) to give [Rh(Cp)(mu-Cl)(NH=CMe(2))](2)(ClO(4))(2) (1), which in turn reacts with PPh(3) (1:2) to give [Rh(Cp)Cl(NH=CMe(2))(PPh(3))]ClO(4) (2), and (ii) with [Ag(NH=CMe(2))(2)]ClO(4) (1:2 or 1:4) to give [Rh(Cp)Cl(NH=CMe(2))(2)]ClO(4) (3) or [Rh(Cp)(NH=CMe(2))(3)](ClO(4))(2).H(2)O (4.H(2)O), respectively. Complex 3 reacts (i) with XyNC (1:1, Xy = 2,6-dimethylphenyl) to give [Rh(Cp)Cl(NH=CMe(2))(CNXy)]ClO(4) (5), (ii) with Tl(acac) (1:1, acacH = acetylacetone) or with [Au(acac)(PPh(3))] (1:1) to give [Rh(Cp)(acac)(NH=CMe(2))]ClO(4) (6), (iii) with [Ag(NH=CMe(2))(2)]ClO(4) (1:1) to give 4, and (iv) with (PPN)Cl (1:1, PPN = Ph(3)P=N=PPh(3)) to give [Rh(Cp)Cl(imam)]Cl (7.Cl), which contains the imam ligand (N,N-NH=C(Me)CH(2)C(Me)(2)NH(2) = 4-imino-2-methylpentan-2-amino) that results from the intramolecular aldol-type condensation of the two acetimino ligands. The homologous perchlorate salt (7.ClO(4)) can be prepared from 7.Cl and AgClO(4) (1:1), by treating 3 with a catalytic amount of Ph(2)C=NH, in an atmosphere of CO, or by reacting 4with (PPN)Cl (1:1). The reactions of 7.ClO(4) with AgClO(4) and PTo(3) (1:1:1, To = C(6)H(4)Me-4) or XyNC (1:1:1) give [Rh(Cp)(imam)(PTo(3))](ClO(4))(2).H(2)O (8) or [Rh(Cp)(imam)(CNXy)](ClO(4))(2) (9), respectively. The crystal structures of 3 and 7.Cl have been determined.     

Catalytic dehydrocoupling of Me2NHBH3 with Al(NMe2)3

The catalytic dehydrocoupling reaction of Me(2)NHBH(3) with Al(NMe(2))(3) gives the dimer [Me(2)NBH(2)](2) and the chain [(Me(2)N)(2)BH], involving the thermally-stable Al(III) hydride catalyst [{(Me(2)N)(2)BH(2)}(2)AlH].     

Chemistry of phosphine-borane adducts at platinum centers: dehydrocoupling reactivity of Pt(II) dihydrides with P-H bonds

The reaction of the Pt(II) dihydride complex cis-[PtH2(dcype)](dcype = 1,2-bis(dicyclohexylphosphino)ethane) with the primary or secondary phosphine-borane adducts PhRPH x BH3(R = H, Ph) was found to exclusively afford the mono-substituted complexes cis-[PtH(PPhR x BH3)(dcype)](1: R = H; 2: R = Ph)via a dehydrocoupling reaction between Pt-H and P-H bonds. Similar reactivity was observed between the uncoordinated phosphines PhRPH (R = H, Ph) and cis-[PtH2(dcype)], which gave cis-[PtH(PPhR)(dcype)](4: R = H; 5: R = Ph). The complexes were characterized by 1H, 11B, 13C and 31P NMR spectroscopy, IR, MS and, in the case of 2, X-ray crystallography that confirmed the cis geometries. The di-substituted complex cis-[Pt(PhPH x BH3)2(dcype)](3) was prepared from the reaction of cis-[PtCl2(dcype)] with two equivalents of Li[PPhH x BH3]. This suggested that steric reasons alone cannot be used to explain the lack of reactivity with respect to a second dehydrocoupling reaction involving the remaining Pt-H bond in complexes 1, 2, 4 and 5.     

Rhodium(I) and Rhodium(III) complexes containing the chiral ligand 2,6-bis[4'(S)-isopropyloxazolin-2'-yl]pyridine (pybox): an unprecedented monohapto coordination of pybox

The complex [Rh(kappa(3)-N,N,N-pybox)(CO)][PF(6)] (1) has been prepared by reaction of the precursor [Rh(mu-Cl)(eta(2)-C(2)H(4))(2)](2), 2,6-bis[4'(S)-isopropyloxazolin-2'-yl]pyridine (pybox), CO, and NaPF(6). Complex 1 reacts with monodentate phosphines to give the complexes [Rh(kappa(1)-N-pybox)(CO)(PR(3))(2)][PF(6)] (R(3) = MePh(2) (2), Me(2)Ph (3), (C(3)H(5))Ph(2) (4)), which show a previously unseen monodentate coordination of pybox. Complex 1 undergoes oxidative addition reactions with iodine and CH(3)I leading to the complexes [RhI(R)(kappa(3)-N,N,N-pybox)(CO)][PF(6)] (R = I (5); R = CH(3) (6)). Furthermore, a new allenyl Rh(III)-pybox complex of formula [Rh(CH=C=CH(2))Cl(2)(kappa(3)-N,N,N-pybox)] (7) has been synthesized by a one-pot reaction from [Rh(mu-Cl)(eta(2)-C(2)H(4))(2)](2), pybox, and an equimolar amount of propargyl chloride.     

Synthesis and reactivity of Ir(I) and Ir(III) complexes with MeNH2, Me2C=NR (R = H, Me), C,N-C6H4{C(Me)=N(Me)}-2, and N,N'-RN=C(Me)CH2C(Me2)NHR (R = H, Me) ligands

Complexes [Ir(Cp*)Cl(n)(NH2Me)(3-n)]X(m) (n = 2, m = 0 (1), n = 1, m = 1, X = Cl (2a), n = 0, m = 2, X = OTf (3)) are obtained by reacting [Ir(Cp*)Cl(mu-Cl)]2 with MeNH2 (1:2 or 1:8) or with [Ag(NH2Me)2]OTf (1:4), respectively. Complex 2b (n = 1, m = 1, X = ClO 4) is obtained from 2a and NaClO4 x H2O. The reaction of 3 with MeC(O)Ph at 80 degrees C gives [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(NH2Me)]OTf (4), which in turn reacts with RNC to give [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(CNR)]OTf (R = (t)Bu (5), Xy (6)). [Ir(mu-Cl)(COD)]2 reacts with [Ag{N(R)=CMe2}2]X (1:2) to give [Ir{N(R)=CMe2}2(COD)]X (R = H, X = ClO4 (7); R = Me, X = OTf (8)). Complexes [Ir(CO)2(NH=CMe2)2]ClO4 (9) and [IrCl{N(R)=CMe2}(COD)] (R = H (10), Me (11)) are obtained from the appropriate [Ir{N(R)=CMe2}2(COD)]X and CO or Me4NCl, respectively. [Ir(Cp*)Cl(mu-Cl)]2 reacts with [Au(NH=CMe2)(PPh3)]ClO4 (1:2) to give [Ir(Cp*)(mu-Cl)(NH=CMe2)]2(ClO4)2 (12) which in turn reacts with PPh 3 or Me4NCl (1:2) to give [Ir(Cp*)Cl(NH=CMe2)(PPh3)]ClO4 (13) or [Ir(Cp*)Cl2(NH=CMe2)] (14), respectively. Complex 14 hydrolyzes in a CH2Cl2/Et2O solution to give [Ir(Cp*)Cl2(NH3)] (15). The reaction of [Ir(Cp*)Cl(mu-Cl)]2 with [Ag(NH=CMe2)2]ClO4 (1:4) gives [Ir(Cp*)(NH=CMe2)3](ClO4)2 (16a), which reacts with PPNCl (PPN = Ph3=P=N=PPh3) under different reaction conditions to give [Ir(Cp*)(NH=CMe2)3]XY (X = Cl, Y = ClO4 (16b); X = Y = Cl (16c)). Equimolar amounts of 14 and 16a react to give [Ir(Cp*)Cl(NH=CMe2)2]ClO4 (17), which in turn reacts with PPNCl to give [Ir(Cp*)Cl(H-imam)]Cl (R-imam = N,N'-N(R)=C(Me)CH2C(Me)2NHR (18a)]. Complexes [Ir(Cp*)Cl(R-imam)]ClO4 (R = H (18b), Me (19)) are obtained from 18a and AgClO4 or by refluxing 2b in acetone for 7 h, respectively. They react with AgClO4 and the appropriate neutral ligand or with [Ag(NH=CMe2)2]ClO4 to give [Ir(Cp*)(R-imam)L](ClO4)2 (R = H, L = (t)BuNC (20), XyNC (21); R = Me, L = MeCN (22)) or [Ir(Cp*)(H-imam)(NH=CMe2)](ClO4)2 (23a), respectively. The later reacts with PPNCl to give [Ir(Cp*)(H-imam)(NH=CMe2)]Cl(ClO4) (23b). The reaction of 22 with XyNC gives [Ir(Cp*)(Me-imam)(CNXy)](ClO4)2 (24). The structures of complexes 15, 16c and 18b have been solved by X-ray diffraction methods.     

Heteronuclear rhodium, palladium, platinum, and gold organoimido complexes from dinuclear organoamido rhodium precursors

Treatment of the organoamido complexes [Rh(2)(mu-4-HNC(6)H(4)Me)(2)(L(2))(2)] (L(2) = 1,5-cyclooctadiene (cod), L = CO) with nBuLi gave solutions of the organoimido species [Li(2)Rh(2)(mu-4-NC(6)H(4)Me)(2)(L(2))(2)]. Further reaction of [Li(2)Rh(2)(mu-4-NC(6)H(4)Me)(2)(cod)(2)] with [Rh(2)(mu-Cl)(2)(cod)(2)] afforded the neutral tetranuclear complex [Rh(4)(mu-4-NC(6)H(4)Me)(2)(cod)(4)] (2), which rationalizes the direct syntheses of 2 from [Rh(2)(mu-Cl)(2)(cod)(2)] and Li(2)NC(6)H(4)Me. Reactions of [Li(2)Rh(2)(mu-4-NC(6)H(4)Me)(2)(CO)(4)] with chloro complexes such as [Rh(2)(mu-Cl)(2)(CO)(4)], [MCl(2)(cod)] (M = Pd, Pt), and [Ru(2)(mu-Cl)(2)Cl(2)(p-cymene)(2)] afforded the homo- and heterotrinuclear complexes PPN[Rh(3)(mu-4-NC(6)H(4)Me)(2)(CO)(6)] (5; PPN=bis(triphenylphosphine)iminium), [(CO)(4)Rh(2)(mu-4-NC(6)H(4)Me)(2)M(cod)] (M = Pd (6), Pt(7)) and [(CO)(4)Rh(2)(mu-4-NC(6)H(4)Me)(2)Ru(p-cymene)] (8), while the reaction with [AuCl(PPh(3))] gave the tetranuclear compound [(CO)(4)Rh(2)(mu--4-NC(6)H(4)Me)(2)[Au(PPh(3))](2)] (9). The structures of complexes 6, 8, and 9 were determined by X-ray diffraction studies. The anion of 5 reacts with [AuCl(PPh(3))] to give the butterfly cluster [[Rh(3)(mu-4-NC(6)H(4)Me)(2)(CO)(6)]Au(PPh(3))] (10), in which the Au atom is bonded to two rhodium atoms. Reaction of the anion of 5 with [Rh(cod)(NCMe)(2)](BF(4)) gave the tetranuclear complex [Rh(4)(mu-4-NC(6)H(4)Me)(2)(CO)(6)(cod)] (11) in which the Rh(cod) fragment is pi-bonded to one of the arene rings, while the reaction of the anion of 5 with [PdCl(2)(cod)] afforded the heterotrinuclear complex 6 through a metal exchange process.