Chemical Fixation of CO2 and Other Heterogeneous Catalytic Studies by Employing a Layered Cu‐Porphyrin Prepared Through Single‐Crystal to Single‐Crystal Exchange of a Zn Analogue

A solvothermal reaction of Zn(NO₃)₂ ? 6 H₂O, tetra‐(4‐pyridyl)porphyrin (H₂TPyP), and 4,4′‐oxybis(benzoic acid) (H₂OBA) resulted in a new two‐dimensional Zn‐ porphyrin metal–organic framework compound, [Zn₂(C₄₀H₂₄N₈)_0.5(C₁₄H₈O₅)(DMA)](DMA)(H₂O)₆ ( 1 ; DMA=N,N‐dimethylacetamide). The Zn^II ions present in 1 could be exchanged by using a solution of Cu(NO₃)₂ ? 3 H₂O in DMA at room temperature to give [Cu₂(C₄₀H₂₄N₈)_0.5(C₁₄H₈O₅)(DMA)](DMA)(H₂O)₃ ( Cu∈1 ). The extra‐framework solvent molecules have been shown to be reversibly removed or exchanged without collapse of the framework. Solvent‐free Cu∈1 was explored as an active heterogeneous catalyst towards three different organic reactions: 1) the chemical fixation of CO₂ into cyclic carbonate at room temperature and 1 atm; 2) the nitroaldol reaction under solvent‐free conditions, and 3) the three‐component coupling of aminopyridine, benzaldehyde, and aryl alkynes followed by 5‐exo‐dig cyclization to produce the important pharmacophore imidazopyridine.     

Two ZnII Metal‐Organic Frameworks with Coordinatively Unsaturated Metal Sites: Structures,Adsorption, and Catalysis

Assembly of Zn(NO₃)₂ with the tripodal ligand H₃TCPB (1,3,5‐tri(4‐carboxyphenoxy)benzene) affords two porous isoreticular metal‐organic frameworks, [Zn₃(TCPB)₂?2DEF]? 3DEF ( 1 ) and [Zn₃(TCPB)₂?2H₂O]? 2H₂O?4DMF ( 2 ). Single‐crystal X‐ray diffraction analyses reveal that 1 crystallizes in the monoclinic space group P2₁/c and possesses a 2D network containing 1D microporous opening channels with an effective size of 3.0×2.9 Ų, whereas 2 crystallizes in the trigonal space group c1 and also possesses a 2D network containing 1D channels, with an effective aperture of 4.0×4.0 Ų. TOPOS analysis reveals that both 1 and 2 have a (3,6)‐connected network topology with the Schläfli symbol of (4³?6¹²) (4³)₂. According to the variable‐temperature powder X‐ray diffraction patterns, the solid phase of 1 can be converted into that of 2 during a temperature‐induced dynamic structural transformation, thus indicating that the framework of 2 represents the most thermally stable polymorph. Desolvated 2 exhibits highly selective adsorption behaviors toward H₂/N₂, CO₂/N₂, and CO₂/CH₄; furthermore, it displays size‐selective catalytic activity towards carbonyl cyanosilylation and Henry (nitroaldol) reactions.     

New 3 D Tubular Porous Structure of an Organic–Zincophosphite Framework with Interesting Gas Adsorption and Luminescence Properties

A new 3D tubular zinc phosphite, Zn₂(C₂₂H₂₂N₈)_0.5(HPO₃)₂?H₂O ( 1 ), incorporating a tetradentate organic ligand was synthesized under hydro(solvo)thermal conditions and structurally characterized by single‐crystal X‐ray diffraction. Compound 1 is the first example of inorganic zincophosphite chains being interlinked through 1,2,4,5‐tetrakis(imidazol‐1‐ylmethyl)benzene to form a tubular porous framework with unusual organic–inorganic hybrid channels. The thermal and chemical stabilities, high capacity for CO₂ adsorption compared to that for N₂ adsorption, and interesting optical properties of LED devices fabricated using this compound were also studied.     

Two ZnII‐based MOFs constructed with biphenyl‐2,2′,5,5′‐tetracarboxylic acid and flexible N‐donor ligands: syntheses,structures and properties

Two new Zn²⁺‐based metal–organic frameworks (MOFs) based on biphenyl‐2,2′,5,5′‐tetracarboxylic acid, i.e. H₄(o,m‐bpta), and N‐donor ligands, namely, poly[[(μ₄‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis{[1,3‐phenylenebis(methylene)]bis(1H‐imidazole)}dizinc(II)] dimethylformamide monosolvate dihydrate], {[Zn₂(C₁₆H₆O₈)(C₁₄H₁₄N₄)₂]·C₃H₇NO·2H₂O}_n or {[Zn₂(o,m‐bpta)(1,3‐bimb)₂]·C₃H₇NO·2H₂O}_n ( 1 ) {1,3‐bimb = [1,3‐phenylenebis(methylene)]bis(1H‐imidazole)}, and poly[[(μ₄‐biphenyl‐2,2′,5,5′‐tetracarboxylato)bis{[1,4‐phenylenebis(methylene)]bis(1H‐imidazole)}dizinc(II)] monohydrate], {[Zn₂(C₁₆H₆O₈)(C₁₄H₁₄N₄)₂]·H₂O}_n or {[Zn₂(o,m‐bpta)(1,4‐bimb)₂]·H₂O}_n ( 2 ) {1,4‐bimb = [1,4‐phenylenebis(methylene)]bis(1H‐imidazole)}, have been synthesized under solvothermal conditions. The complexes were characterized by IR spectroscopy, elemental analysis, single‐crystal X‐ray diffraction and powder X‐ray diffraction analysis. Structurally, the (o,m‐bpta)^4? ligands are fully deprotonated and combine with Zn²⁺ ions in μ₄‐coordination modes. Complex 1 is a (3,4)‐connected porous network with honeycomb‐like [Zn₂(o,m‐bpta)]_n sheets formed by 4‐connected (o,m‐bpta)^4? ligands. Complex 2 exhibits a (2,4)‐connected network formed by 4‐connected (o,m‐bpta)^4? ligands linking Zn²⁺ ions in left‐handed helical chains. The cis‐configured 1,3‐bimb and 1,4‐bimb ligands bridge Zn²⁺ ions to form multi‐membered [Zn₂(bimb)₂] loops. Optically, the complexes show strong fluorescence and display larger red shifts compared to free H₄(o,m‐bpta). Complex 2 shows ferroelectric properties due to crystallizing in the C_2v polar point group.     

A three‐dimensional ZnII coordination framework: poly[[μ2‐(E)‐1,2‐bis(pyridin‐4‐yl)ethene][μ4‐(E)‐2,2′‐(diazene‐1,2‐diyl)dibenzoato][μ2‐(E)‐2,2′‐(diazene‐1,2‐diyl)dibenzoato]dizinc(II)]

In the title coordination polymer, [Zn₂(C₁₄H₈N₂O₄)₂(C₁₂H₁₀N₂)]_n, the asymmetric unit contains one Zn^II cation, two halves of 2,2′‐(diazene‐1,2‐diyl)dibenzoate anions (denoted L²⁻) and half of a 1,2‐bis(pyridin‐4‐yl)ethene ligand (denoted bpe). The three ligands lie across crystallographic inversion centres. Each Zn^II centre is four‐coordinated by three O atoms of bridging carboxylate groups from three L²⁻ ligands and by one N atom from a bpe ligand, forming a tetrahedral coordination geometry. Two Zn^II atoms are bridged by two carboxylate groups of L²⁻ ligands, generating a [Zn₂(CO₂)₂] ring. Each loop serves as a fourfold node, which links its four equivalent nodes via the sharing of four L²⁻ ligands to form a two‐dimensional [Zn₂L₄]_n net. These nets are separated by bpe ligands acting as spacers, producing a three‐dimensional framework with a 4⁶6⁴ topology. Powder X‐ray diffraction and solid‐state photoluminescence were also measured.     

Comparison of Gas Sorption Properties of Neutral and Anionic Metal–Organic Frameworks Prepared from the Same Building Blocks but in Different Solvent Systems

Two different 3D porous metal–organic frameworks, [Zn₄O(NTN)₂]?10 DMA?7 H₂O ( SNU‐150 ) and [Zn₅(NTN)₄(DEF)₂][NH₂(C₂H₅)₂]₂?8 DEF?6 H₂O ( SNU‐151 ), are synthesized from the same metal and organic building blocks but in different solvent systems, specifically, in the absence and the presence of a small amount of acid. SNU‐150 is a doubly interpenetrated neutral framework, whereas SNU‐151 is a non‐interpenetrated anionic framework containing diethylammonium cations in the pores. Comparisons of the N₂, H₂, CO₂, and CH₄ gas adsorption capacities as well as the CO₂ adsorption selectivity over N₂ and CH₄ in desolvated SNU‐150′ (BET: 1852 m² g^?1) and SNU‐151′ (BET: 1563 m² g^?1) samples demonstrate that the charged framework is superior to the neutral framework for gas storage and gas separation, despite its smaller surface area and different framework structure.     

A self‐penetrated three‐dimensional zinc(II) coordination framework based on 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoic acid and 1,3‐bis[(imidazol‐1‐yl)methyl]benzene ligands: synthesis,structure and properties

With the rapid development of metal–organic frameworks (MOFs), a variety of MOFs and their derivatives have been synthesized and reported in recent years. Commonly, multifunctional aromatic polycarboxylic acids and nitrogen‐containing ligands are employed to construct MOFs with fascinating structures. 4,4′,4′′‐(1,3,5‐Triazine‐2,4,6‐triyl)tribenzoic acid (H₃TATB) and the bidentate nitrogen‐containing ligand 1,3‐bis[(imidazol‐1‐yl)methyl]benzene (bib) were selected to prepare a novel Zn^II‐MOF under solvothermal conditions, namely poly[[tris{μ‐1,3‐bis[(imidazol‐1‐yl)methyl]benzene}bis[μ₃‐4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoato]trizinc(II)] dimethylformamide disolvate trihydrate], {[Zn₃(C₂₄H₁₂N₃O₆)₂(C₁₄H₁₄N₄)₃]·2C₃H₇NO·3H₂O}_n ( 1 ). The structure of 1 was characterized by single‐crystal X‐ray diffraction, IR spectroscopy and powder X‐ray diffraction. The properties of 1 were investigated by thermogravimetric and fluorescence analysis. Single‐crystal X‐ray diffraction shows that 1 belongs to the monoclinic space group Pc. The asymmetric unit contains three crystallographically independent Zn^II centres, two 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoate (TATB^3?) anions, three complete bib ligands, one and a half free dimethylformamide molecules and three guest water molecules. Each Zn^II centre is four‐coordinated and displays a distorted tetrahedral coordination geometry. The Zn^II centres are connected by TATB^3? anions to form an angled ladder chain with large windows. Simultaneously, the bib ligands link Zn^II centres to give a helical Zn–bib–Zn chain. Furthermore, adjacent ladders are bridged by Zn–bib–Zn chains to form a fascinating three‐dimensional self‐penetrated framework with the short Schläfli symbol 6⁵·7·8¹³·9·10. In addition, the luminescence properties of 1 in the solid state and the fluorescence sensing of metal ions in suspension were studied. Significantly, compound 1 shows potential application as a fluorescent sensor with sensing properties for Zr⁴⁺ and Cu²⁺ ions.     

An Effective Method to Construct Cluster‐based Frameworks with Multifarious Structures,Luminescence, and Sorption Properties

An effective method was developed for the synthesis of three cluster‐based frameworks with multifarious secondary building units (SBUs) and various structures, which were formulated as [Me₂NH₂]₂[Zn₁₀(BTC)₆(μ₃‐O)(μ₄‐O)(H₂O)₅] · 3DMA · 9H₂O ( FJI ‐ 3 ), [Me₂NH₂]₂[Zn₉(μ₃‐OH)₂(BTC)₆(H₂O)₃] · 5DMA · 6H₂O ( FJI ‐ 4 ) and [Me₂NH₂][Zn₃(μ₃‐OH)(BTC)₂DMF] · H₂O ( FJI ‐ 5 ) (H₃BTC = 1,3,5‐benzenetricarboxylic acid, DMA = N,N′‐dimethyl acetamide and DMF = N,N′‐dimethyl formamide), respectively. X‐ray structural analysis reveals that FJI ‐ 3 displays 3D highly porous metal‐organic framework with four kinds of microporous cages constructed by two paddle‐wheel Zn₂(CO₂)₄, trimeric Zn₃O(CO₂)₆, and tetrameric Zn₄O(CO₂)₆ SBUs. FJI ‐ 4 exhibits 3D microporous MOFs with a dodecahedral cavities built by paddle‐wheel Zn₂(CO₂)₄ and trimeric Zn₃O(CO₂)₆. FJI ‐ 5 shows 3D microporous MOFs with an 1D channel assembled by the Zn₃O(CO₂)₆ SBUs. In addition, the fluorescence and sorption properties in these cluster‐based frameworks were also investigated. Furthermore, the method employed in this work may provide an useful approach to the design and synthesis of novel cluster‐based frameworks.     

Zn3(BTC)2 as a Highly Efficient Reusable Catalyst for the Synthesis of 2‐Aryl‐1H‐Benzimidazole

Zn₃(BTC)₂ metal‐organic frameworks as recyclable and heterogeneous catalysts were effectively used to catalyze the synthesis of benzimidazole derivatives from o‐phenylendiamine and aldehydes in ethanol. This method provides 2‐aryl‐1H‐benzimidazoles in good to excellent yields with little catalyst loading. The catalyst was characterized using different techniques such as X‐ray diffraction (XRD), energy dispersive X‐ray (EDX) analysis, scanning electron microscopy (SEM), and Fourier transform infrared (FT‐IR) spectroscopy.     

Structure and photophysical and electrochemical properties of a copper porphyrin complex with a three‐dimensional framework

Porphyrins and metalloporphyrins can generally show attractive structural motifs and interesting properties. A new copper porphyrin, namely poly[[μ‐chlorido‐[μ₅‐5,10,15,20‐tetrakis(pyridin‐4‐yl)‐21H,23H‐porphine]tricopper(I)] [aquadichloridocopper(II)]], {[Cu₃(C₄₀H₂₄N₈)Cl][CuCl₂(H₂O)]}_n ( 1 ), was synthesized by the self‐assembly of copper chloride with 5,10,15,20‐tetrakis(pyridin‐4‐yl)‐21H,23H‐porphine under solvothermal conditions. The structure of this copper porphyrin was characterized by single‐crystal X‐ray crystallography and elemental analysis. The porphyrin macrocycle shows a distorted saddle geometry, with the four pyrrole rings slightly distorted in an alternating mode either upwards or downwards. The copper ions show three‐coordinated triangular and four‐coordinated square‐planar geometries. Every copper–porphyrin unit connects to 12 others via four μ₄‐bridging Cu₂Cl moieties to complete the three‐dimensional framework of compound 1 , with isolated CuCl₂(H₂O) units located in the voids. This copper porphyrin displays a red photoluminescence. Electrochemical measurements showed that compound 1 has two redox waves (E_1/2 = ?160 and 91 mV).     

Two ZnII mononuclear coordination compounds with pyridinedicarboxylate and auxiliary N‐(pyridin‐4‐ylmethylidene)hydroxylamine ligands

Two new mononuclear coordination compounds, bis{4‐[(hydroxyimino)methyl]pyridinium} diaquabis(pyridine‐2,5‐dicarboxylato‐κ²N,O²)zincate(II), (C₆H₇N₂O)₂[Zn(C₇H₃NO₄)₂(H₂O)₂], (1), and (pyridine‐2,6‐dicarboxylato‐κ³O²,N,O⁶)bis[N‐(pyridin‐4‐ylmethylidene‐κN)hydroxylamine]zinc(II), [Zn(C₇H₃NO₄)(C₆H₆N₂O)₂], (2), have been synthesized and characterized by single‐crystal X‐ray diffractometry. The centrosymmetric Zn^II cation in (1) is octahedrally coordinated by two chelating pyridine‐2,5‐dicarboxylate ligands and by two water molecules in a distorted octahedral geometry. In (2), the Zn^II cation is coordinated by a tridentate pyridine‐2,6‐dicarboxylate dianion and by two N‐(pyridin‐4‐ylmethylidene)hydroxylamine molecules in a distorted C₂‐symmetric trigonal bipyramidal coordination geometry.     

Ligand Functionalization and Its Effect on CO2 Adsorption in Microporous Metal–Organic Frameworks

We report two new 3D structures, [Zn₃(bpdc)₃(2,2′‐dmbpy)] (DMF)_x(H₂O)_y ( 1 ) and [Zn₃(bpdc)₃(3,3′‐dmbpy)]?(DMF)₄(H₂O)_0.5 ( 2 ), by methyl functionalization of the pillar ligand in [Zn₃(bpdc)₃(bpy)] (DMF)₄?(H₂O) ( 3 ) (bpdc=biphenyl‐4,4′‐dicarboxylic acid; z,z′‐dmbpy=z,z′‐dimethyl‐4,4′‐bipyridine; bpy=4,4′‐bipyridine). Single‐crystal X‐ray diffraction analysis indicates that 2 is isostructural to 3 , and the power X‐ray diffraction (PXRD) study shows a very similar framework of 1 to 2 and 3 . Both 1 and 2 are 3D porous structures made of Zn₃(COO)₆ secondary building units (SBUs) and 2,2′‐ or 3,3′‐dmbpy as pillar ligand. Thermogravimetric analysis (TGA) and PXRD studies reveal high thermal and water stability for both compounds. Gas‐adsorption studies show that the reduction of surface area and pore volume by introducing a methyl group to the bpy ligand leads to a decrease in H₂ uptake for both compounds. However, CO₂ adsorption experiments with 1′ (guest‐free 1 ) indicate significant enhancement in CO₂ uptake, whereas for 2′ (guest‐free 2 ) the adsorbed amount is decreased. These results suggest that there are two opposing and competitive effects brought on by methyl functionalization: the enhancement due to increased isosteric heats of CO₂ adsorption (Q_st), and the detraction due to the reduction of surface area and pore volume. For 1′ , the enhancement effect dominates, which leads to a significantly higher uptake of CO₂ than its parent compound 3′ (guest‐free 3 ). For 2′ , the detraction effect predominates, thereby resulting in reduced CO₂ uptake relative to its parent structure 3′ . IR and Raman spectroscopic studies also present evidence for strong interaction between CO₂ and methyl‐functionalized π moieties. Furthermore, all compounds exhibit high separation capability for CO₂ over other small gases including CH₄, CO, N₂, and O₂.     

Solvent Molecule Controlled Zinc(II) Metal‐Organic Frameworks with Different Topology

Two zinc(II) coordination polymers, namely [Zn₂(bptc)(DMF)₂(H₂O)]_n ( 1 ) and [Zn(bptc)_0.5(DMA)]_n ( 2 ) (H₄bptc = biphenyl‐3,3′,5,5′‐tetracarboxylic acid, DMF = N,N′‐dimethylformamide, DMA = N,N′‐dimethylacetamide), were obtained under solvothermal conditions by varying the reaction solvents. Single crystal X‐ray diffraction analyses revealed that compound 1 features a 3D PtS type framework based on dinuclear [Zn₂O(COO)₂] subunits and compound 2 features a 3D lvt type framework based on paddle‐wheel shaped [Zn₂(COO)₄] subunits. Moreover, the luminescent and thermal stabilities of these two compounds were investigated.     

A zinc(II) metal–organic framework with a novel topology formed from 4,4′,4′′‐nitrilotribenzoate and 4,4′‐bipyridine ligands

A metal–organic framework with a novel topology, poly[sesqui(μ₂‐4,4′‐bipyridine)bis(dimethylformamide)bis(μ₄‐4,4′,4′′‐nitrilotribenzoato)trizinc(II)], [Zn₃(C₂₁H₁₂NO₆)₂(C₁₀H₈N₂)_1.5(C₃H₇NO)₂]_n, was obtained by the solvothermal method using 4,4′,4′′‐nitrilotribenzoic acid and 4,4′‐bipyridine (bipy). The structure, determined by single‐crystal X‐ray diffraction analysis, possesses three kinds of crystallographically independent Zn^II cations, as well as binuclear Zn₂(COO)₄(bipy)₂ paddle‐wheel clusters, and can be reduced to a novel topology of a (3,3,6)‐connected 3‐nodal net, with the Schläfli symbol {5.6²}₄{5².6}₄{5⁸.8⁷} according to the topological analysis.     

A Porphyrin‐Based Porous rtl Metal–Organic Framework as an Efficient Catalyst for the Cycloaddition of CO2 to Epoxides

A porous rtl metal–organic framework (MOF) [Mn₅L(H₂O)₆?(DMA)₂]?5DMA?4C₂H₅OH ( 1? Mn) (H₁₀L=5,10,15,20‐tetra(4‐(3,5‐dicarboxylphenoxy)phenyl)porphyrin; DMA=N,N′‐dimethylacetamide) was synthesized by employing a new porphyrin‐based octacarboxylic acid ligand. 1? Mn exhibits high Mn^II density in the porous framework, providing it great Lewis‐acid heterogeneous catalytic capability for the cycloaddition of CO₂ with epoxides. Strikingly, 1? Mn features excellent catalytic activity to the cycloaddition of CO₂ to epoxides, with a remarkable initial turnover frequency 400 per mole of catalyst per hour at 20 atm. As‐synthesized 1? Mn also exhibits size selectivity to different epoxide substrates on account of their steric hindrance. The high catalytic activity, size selectivity, and stability toward the epoxides on catalytic cycloaddition of CO₂ make 1? Mn a promising heterogeneous catalyst for fixation and utilization of CO₂.     

Synthesis,Characterization, and Properties of Four Metal Complexes with Mulitdentate N‐Acyl‐Salicylhydrazide Ligands

The reactions of the new nitrilotriacetic acid N′,N′,N′‐tri(salicyloyl)trihydrazide (Ntash) with the corresponding metal salts gave four new complexes [Pb₄(bshz)₂] · 2DMF ( 1 ), [Co₂(bshz)(C₅H₅N)₆] · 2ClO₄ · (C₅H₅N) · 2H₂O ( 2 ), [Cu₃(fshz)₂(C₅H₅N)₂] ( 3 ), and [Zn₃(fshz)₂(C₅H₅N)₃]_n · 2DMF ( 4 ), in which two multidentate ligands, namely N,N′‐disalicyloylhydrazine (H₄bshz) and N‐formylsalicylhydrazide (H₃fshz) were generated in situ from Ntash. The structures of these complexes were determined by single‐crystal X‐ray diffraction analysis. Complex 1 presents a novel tetranuclear lead(II) cluster structure with the four lead(II) cations in “hemidirected” coordination spheres. The neighboring tetranuclear clusters of 1 are connected by DMF molecules through weak Pb–O bonds, forming one‐dimensional ribbons. Complexes 2 and 3 show dinuclear and linear trinuclear structures with the corresponding Co^III and Cu^II ions in distorted octahedral and square‐planar coordination environments, respectively. Complex 4 exhibits a one‐dimensional zigzag chain structure. The magnetic properties of 3 and the photoluminescent properties of 4 were also investigated.     

Post‐Synthetic Reversible Incorporation of Organic Linkers into Porous Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations and Modification of Gas‐Sorption Properties

The porous metal–organic framework (MOF) {[Zn₂(TCPBDA)(H₂O)₂]?30 DMF?6 H₂O}_n ( SNU‐30 ; DMF=N,N‐dimethylformamide) has been prepared by the solvothermal reaction of N,N,N′,N′‐tetrakis(4‐carboxyphenyl)biphenyl‐4,4′‐diamine (H₄TCPBDA) and Zn(NO₃)₂?6 H₂O in DMF/tBuOH. The post‐synthetic modification of SNU‐30 by the insertion of 3,6‐di(4‐pyridyl)‐1,2,4,5‐tetrazine (bpta) affords single‐crystalline {[Zn₂(TCPBDA)(bpta)]?23 DMF?4 H₂O}_n ( SNU‐31 SC ), in which channels are divided by the bpta linkers. Interestingly, unlike its pristine form, the bridging bpta ligand in the MOF is bent due to steric constraints. SNU‐31 can be also prepared through a one‐pot solvothermal synthesis from Zn^II, TCPBDA^4?, and bpta. The bpta linker can be liberated from this MOF by immersion in N,N‐diethylformamide (DEF) to afford the single‐crystalline SNU‐30 SC , which is structurally similar to SNU‐30 . This phenomenon of reversible insertion and removal of the bridging ligand while preserving the single crystallinity is unprecedented in MOFs. Desolvated solid SNU‐30′ adsorbs N₂, O₂, H₂, CO₂, and CH₄ gases, whereas desolvated SNU‐31′ exhibits selective adsorption of CO₂ over N₂, O₂, H₂, and CH₄, thus demonstrating that the gas adsorption properties of MOF can be modified by post‐synthetic insertion/removal of a bridging ligand.     

Assembly of ZnII and CdII coordination polymers based on a flexible multicarboxylate ligand and nitrogen‐containing auxiliary ligands through a mixed‐ligand synthetic strategy: syntheses,structures and fluorescence properties

The structures of coordination polymers are strongly influenced by the organic ligands and metal ions used for their construction, so it is important to choose suitable ligands and metal ions and appropriate synthetic processes. Two novel d¹⁰ coordination polymers, namely poly[[diaquabis(2,2′‐bipyridine)[μ₄‐4,4′‐(1,4‐phenylenedioxy)bis(benzene‐1,2‐dicarboxylato)]dizinc(II)] dihydrate], {[Zn₂(C₂₂H₁₀O₁₀)(C₁₀H₈N₂)₂(H₂O)₂]·2H₂O}_n, (1), and poly[[diaquabis(1,10‐phenanthroline)[μ₄‐4,4′‐(1,4‐phenylenedioxy)bis(benzene‐1,2‐dicarboxylato)]dicadmium(II)] dimethylformamide disolvate], {[Cd₂(C₂₂H₁₀O₁₀)(C₁₂H₈N₂)₂(H₂O)₂]·2C₃H₇NO}_n, (2), have been synthesized from 4,4′‐(1,4‐phenylenedioxy)bis(benzene‐1,2‐dicarboxylic acid) (H₄L) and two different N‐containing auxiliary ligands through a mixed‐ligand synthetic strategy under a solvothermal environment. The structures were characterized by single‐crystal X‐ray diffraction, powder X‐ray diffraction, elemental analysis and IR spectroscopy. Compounds (1) and (2) both present one‐dimensional chain structures and two‐dimensional supramolecular layer structures constructed by weak hydrogen bonds. It is interesting to note that the carboxylate ligands reveal stable trans configurations in both compounds. The fluorescence properties of (1) and (2) in the solid state were also investigated.     

Two ZnII coordination complexes assembled by trithiocyanuric acid and two different N‐donor auxiliary ligands

The dipyridyl‐type building blocks 4‐amino‐3,5‐bis(pyridin‐3‐yl)‐1,2,4‐triazole (3‐bpt) and 4,4′‐bipyridine (bpy) have been used to assemble with Zn^II in the presence of trithiocyanuric acid (ttcH₃) to afford two coordination compounds, namely bis[4‐amino‐3,5‐bis(pyridin‐3‐yl)‐1,2,4‐triazole‐κN³]bis(trithiocyanurato‐κ²N,S)zinc(II), [Zn(C₃H₂N₃S₃)₂(C₁₂H₁₀N₆)₂]·2H₂O, (1), and catena‐poly[[[bis(trithiocyanurato‐κ²N,S)zinc(II)]‐μ‐4,4′‐bipyridine‐κ²N:N′] 4,4′‐bipyridine monosolvate], {[Zn₂(C₃H₂N₃S₃)₄(C₁₀H₈N₂)₃]·C₁₀H₈N₂}_n, (2). Single‐crystal X‐ray analysis indicates that complex (1) is a mononuclear structure, while complex (2) presents a one‐dimensional chain coordination motif. In both complexes, the central Zn^II cation adopts an octahedral geometry, coordinated by four N‐ and two S‐donor atoms. Notably, trithiocyanurate (ttcH₂⁻) adopts the same bidentate chelating coordination mode in each complex and exists in the thione tautomeric form. The 3‐bpt co‐ligand in (1) adopts a monodentate coordination mode and serves as a terminal pendant ligand, whereas the 4,4′‐bipyridine (bpy) ligand in (2) adopts a bidentate–bridging coordination mode. The different coordination characters of the different N‐donor auxiliary ligands lead to structural diversity for complexes (1) and (2). Further analysis indicates that the resultant three‐dimensional supramolecular networks for (1) and (2) arise through intermolecular N—H...S and N—H...N hydrogen bonds. Both complexes have been further characterized by FT–IR spectroscopy and elemental analyses.     

Two new zinc(II) and mercury(II) complexes based on N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide): synthesis,crystal structures and antibacterial activities

Reaction of N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide), C₂₀H₁₈F₂N₄O₂, ( L^F ), with zinc chloride and mercury(II) chloride produced different types and shapes of neutral coordination complexes, namely, dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ²N,O]zinc(II), [ZnCl₂(C₂₀H₁₈F₂N₄O₂)], ( 1 ), and dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ⁴O,N,N′,O′]mercury(II), [HgCl₂(C₂₀H₁₈F₂N₄O₂)], ( 2 ). The organic ligand and its metal complexes are characterized using various techniques: IR, UV–Vis and nuclear magnetic resonance (NMR) spectroscopies, in addition to powder X‐ray diffraction (PXRD), single‐crystal X‐ray crystallography and microelemental analysis. Depending upon the data from these analyses and measurements, a typical tetrahedral geometry was confirmed for zinc complex ( 1 ), in which the Zn^II atom is located outside the bis(benzhydrazone) core. The Hg^II atom in ( 2 ) is found within the core and has a common octahedral structure. The in vitro antibacterial activities of the prepared compounds were evaluated against two different bacterial strains, i.e. gram positive Bacillus subtilis and gram negative Pseudomonas aeruginosa bacteria. The prepared compounds exhibited differentiated growth‐inhibitory activities against these two bacterial strains based on the difference in their lipophilic nature and structural features.