C(spn)−X (n=1–3) Bond Activation by Palladium

We have studied the palladium-mediated activation of C(spⁿ)−X bonds (n = 1–3 and X = H, CH₃, Cl) in archetypal model substrates H₃C−CH₂−X, H₂C=CH−X and HC≡C−X by catalysts PdL_n with L_n = no ligand, Cl⁻, and (PH₃)₂, using relativistic density functional theory at ZORA-BLYP/TZ2P. The oxidative addition barrier decreases along this series, even though the strength of the bonds increases going from C(sp³)−X, to C(sp²)−X, to C(sp)−X. Activation strain and matching energy decomposition analyses reveal that the decreased oxidative addition barrier going from sp³, to sp², to sp, originates from a reduction in the destabilizing steric (Pauli) repulsion between catalyst and substrate. This is the direct consequence of the decreasing coordination number of the carbon atom in C(spⁿ)−X, which goes from four, to three, to two along this series. The associated net stabilization of the catalyst–substrate interaction dominates the trend in strain energy which indeed becomes more destabilizing along this same series as the bond becomes stronger from C(sp³)−X to C(sp)−X.     

Intramolecular C(sp3)–H Bond Oxygenation by Transition-Metal Acylnitrenoids

This study demonstrates for the first time that easily accessible transition-metal acylnitrenoids can be used for controlled direct C(sp³)-H oxygenations. Specifically, a ruthenium catalyst activates N-benzoyloxycarbamates as nitrene precursors towards regioselective intramolecular C−H oxygenations to provide cyclic carbonates, hydroxylated carbamates, or 1,2-diols. The method can be applied to the chemoselective C−H oxygenation of benzylic, allylic, and propargylic C(sp³)−H bonds. The reaction can be performed in an enantioselective fashion and switched in a catalyst-controlled fashion between C−H oxygenation and C−H amination. This work provides a new reaction mode for the regiocontrolled and stereocontrolled conversion of C(sp³)-H into C(sp³)−O bonds.     

Carboboration-Driven Generation of a Silylium Ion for Vinylic C−F Bond Functionalization by B(C6F5)3 Catalysis

Strong main-group Lewis acids such as silylium ions are known to effectively promote heterolytic C(sp³)−F bond cleavage. However, carrying out the C(sp²)−F bond transformation of vinylic C−F bonds has remained an unmet challenge. Herein, we describe our development of a new and simple strategy for vinylic C−F bond transformation of α-fluorostyrenes with silyl ketene acetals catalyzed by B(C₆F₅)₃ under mild conditions. Our theoretical calculations revealed that a stabilized silylium ion, which is generated from silyl ketene acetals by carboboration, cleaves the C−F bond of α-fluorostyrenes. A comparative study of α-chloro or bromostyrenes demonstrated that our reaction can be applied only to α-fluorostyrenes because the strong silicon-fluorine affinity facilitates an intramolecular interaction of silylium ions with fluorine atom to cleave the C−F bond. A broad range of α-fluorostyrenes as well as a range of silyl ketene acetals underwent this C−F bond transformation.     

Controllable Si−C Bond Activation Enables Stereocontrol in the Palladium-Catalyzed [4+2] Annulation of Cyclopropenes with Benzosilacyclobutanes

A novel and unusual palladium-catalyzed [4+2] annulation of cyclopropenes with benzosilacyclobutanes is reported. This reaction occurred through chemoselective Si−C(sp²) bond activation in synergy with ring expansion/insertion of cyclopropenes to form new C(sp²)−C(sp³) and Si−C(sp³) bonds. An array of previously elusive bicyclic skeleton with high strain, silabicyclo[4.1.0]heptanes, were formed in good yields with excellent diastereoselectivity under mild conditions. An asymmetric version of the reaction with a chiral phosphoramidite ligand furnished a variety of chiral bicyclic silaheterocycle derivatives with good enantioselectivity (up to 95.5:4.5 er). Owing to the mild reaction conditions, the good stereoselectivity profile, and the ready availability of the functionalized precursors, this process constitutes a useful and straightforward strategy for the synthesis of densely functionalized silacycles.     

α- and β-Eliminations in Transition Metal Complexes: Strategies to Cleave Unstrained C−C and C−F Bonds

Oxidative addition is the standard process for single-bond activation in transition metal catalysis and it is known to operate for many types of bonds, but challenging σ-bonds e. g. C(sp³)−F and C(sp³)−C(sp³) bonds are the exceptions in this respect. This short review aims at demonstrating how both α- and β-eliminations may be better options for activation of unstrained C−F and C−C single bonds. Selected examples of such eliminations are presented with a mechanistic focus indicating how unstrained and unactivated C−C and C−F bonds can be broken by employing α- and β-eliminations in transition metal hydrocarbyl ligands. Our examples show that the reaction barrier in β-eliminations is controlled by the s-character of the participating bonds where a higher s-character gives a better overlap in the multi-center transition state thereby increasing the reactivity; still β-aryl eliminations can compete with the classical β-hydrogen eliminations in certain cases.     

Fe-Catalyzed Intramolecular Cross-Dehydrogenative Arylation (CDA), Efficient Synthesis of 1-Arylnaphthalenes and 4-Arylcoumarins

Direct cross-dehydrogenative coupling of different inert C−H bonds is the most straightforward and environmentally benign method to construct C−C bonds. In this paper, we developed an iron-catalyzed intramolecular cross-dehydrogenative arylation (CDA) between benzylic C(sp³)H bond and aromatic C(sp²)H bond. From the readily available linear substrates, 1-arylnaphthalenes and 4-arylcoumarins can be quickly constructed with moderate to good yield (18 examples, up to 73 % yield) in one step. Both symmetrical and unsymmetrical substrates with different functional groups could tolerate this system well to form the anticipated products. A radical initiated dehydrogenative cyclization-dehydrogenation tandem process was proposed.     

γ‐Functionalizations of Amines through Visible‐Light‐Mediated,Redox‐Neutral C−C Bond Cleavage

Cleavage of unstrained C−C bonds under mild, redox‐neutral conditions represents a challenging endeavor which is accomplished here in the context of a flexible, visible‐light‐mediated, γ‐functionalization of amines. In situ generated C‐centered radicals are harvested in the presence of Michael acceptors, thiols and alkyl halides to efficiently form new C(sp³)−C(sp³), C(sp³)−H and C(sp³)−Br bonds, respectively.     

Redox‐Neutral Coupling between Two C(sp3)−H Bonds Enabled by 1,4‐Palladium Shift for the Synthesis of Fused Heterocycles

The intramolecular coupling of two C(sp³)?H bonds to forge a C(sp³)?C(sp³) bond is enabled by 1,4‐Pd shift from a trisubstituted aryl bromide. Contrary to most C(sp³)?C(sp³) cross‐dehydrogenative couplings, this reaction operates under redox‐neutral conditions, with the C?Br bond acting as an internal oxidant. Furthermore, it allows the coupling between two moderately acidic primary or secondary C?H bonds, which are adjacent to an oxygen or nitrogen atom on one side, and benzylic or adjacent to a carbonyl group on the other side. A variety of valuable fused heterocycles were obtained from easily accessible ortho‐bromophenol and aniline precursors. The second C?H bond cleavage was successfully replaced with carbonyl insertion to generate other types of C(sp³)‐C(sp³) bonds.     

γ‐Functionalizations of Amines through Visible‐Light‐Mediated,Redox‐Neutral C−C Bond Cleavage

Cleavage of unstrained C−C bonds under mild, redox‐neutral conditions represents a challenging endeavor which is accomplished here in the context of a flexible, visible‐light‐mediated, γ‐functionalization of amines. In situ generated C‐centered radicals are harvested in the presence of Michael acceptors, thiols and alkyl halides to efficiently form new C(sp³)−C(sp³), C(sp³)−H and C(sp³)−Br bonds, respectively.     

Rhodium(I)‐Catalyzed Sequential C(sp)?C(sp3) and C(sp3)?C(sp3) Bond Formation through Migratory Carbene Insertion

A Rh^I‐catalyzed three‐component reaction of tert‐propargyl alcohol, diazoester, and alkyl halide has been developed. This reaction can be considered as a carbene‐involving sequential alkyl and alkynyl coupling, in which C(sp) C(sp³) and C(sp³) C(sp³) bonds are built successively on the carbenic carbon atom. The Rh^I‐carbene migratory insertion of an alkynyl moiety and subsequent alkylation are proposed to account for the two separate C C bond formations. This reaction provides an efficient and tunable method for the construction of all‐carbon quaternary center.     

Surface oxidation process of a diamond‐like carbon film analyzed by difference X‐ray photoelectron spectroscopy

Difference X‐ray photoelectron spectroscopy (D‐XPS) revealed the surface oxidation process of a diamond‐like carbon (DLC) film. Evaluation of surface functional groups on DLC solely by the C 1s spectrum is difficult because the spectrum is broad and has a secondary asymmetric lineshape. D‐XPS clarified the subtle but critical changes at the DLC surface caused by wet oxidation. The hydroxyl (C―OH) group was dominant at the oxidized surface. Further oxidized carbonyl (C?O) and carboxyl (including carboxylate) (COO) groups were also obtained; however, the oxidation of C?O to COO was suppressed to some extent because the reaction required C―C bond cleavage. Wet oxidation cleaved the aliphatic hydrogenated and non‐hydrogenated sp² carbon bonds (C―H sp² and C―C sp²) to create a pair of C―OH and hydrogenated sp³ carbon (C―H sp³) bonds. The reaction yield for C―H sp² was superior at the surface, suggesting that the DLC film was hydrogen rich at the surface. Oxidation of aromatic sp² rings or polycyclic aromatic hydrocarbons such as nanographite to phenols did not occur because of their resonance stabilization with electron delocalization. Non‐hydrogenated sp³ carbon (C―C sp³) bonds were not affected by oxidation, suggesting that these bonds are chemically inert. Copyright © 2014 John Wiley & Sons, Ltd.     

Rhodium(I)‐Catalyzed Sequential C(sp)C(sp3) and C(sp3)C(sp3) Bond Formation through Migratory Carbene Insertion

A Rh^I‐catalyzed three‐component reaction of tert‐propargyl alcohol, diazoester, and alkyl halide has been developed. This reaction can be considered as a carbene‐involving sequential alkyl and alkynyl coupling, in which C(sp)? C(sp³) and C(sp³)? C(sp³) bonds are built successively on the carbenic carbon atom. The Rh^I‐carbene migratory insertion of an alkynyl moiety and subsequent alkylation are proposed to account for the two separate C? C bond formations. This reaction provides an efficient and tunable method for the construction of all‐carbon quaternary center.     

Organopotassium-Catalyzed Silylation of Benzylic C(sp3)−H Bonds

Benzylsilanes have found increasing applications in organic synthesis as bench-stable synthetic intermediates, yet are mostly produced by stoichiometric procedures. Catalytic alternatives based on the atom-economical silylation of benzylic C(sp³)−H bonds remain scarcely available as specialized directing groups and catalytic systems are needed to outcompete the kinetically-favored silylation of C(sp²)−H bonds. Herein, we describe the first general and catalytic-in-metal undirected silylation of benzylic C(sp³)−H bonds under ambient, transition metal-free conditions using stable tert-butyl-substituted silyldiazenes (tBu−N=N−SiR₃) as silicon source. The high activity and selectivity of the catalytic system, exemplified by the preparation of various mono- or gem-bis benzyl(di)silanes, originates from the facile generation of organopotassium reagents, including tert-butylpotassium.     

Palladium‐Catalyzed Alkylation with Alkyl Halides by C(sp3)−H Activation

Utilizing halogens as traceless directing goups represents an attractive strategy for C−H functionalization. A two C−H alkylation system, initiated by the oxidative addition of organohalides to Pd⁰, has been developed. The first reaction involves an intermolecular alkylation of palladacycles to form C(sp³)−C(sp²) bonds followed by C(sp²)−H activation/cyclization to deliver alkylated benzocyclobutenes as the final products. In the second reaction, two C−C bonds are formed by the reaction of palladacycles with CH₂Br₂, and provides a facile and efficient method for the synthesis of indanes. The alkylated benzocyclobutene products can be transformed into tricyclic hyrocarbons, and the indane derivatives are essential structural motifs in bioactive and odorant molecules.     

Not Carbon s–p Hybridization,but Coordination Number Determines C−H and C−C Bond Length

A fundamental and ubiquitous phenomenon in chemistry is the contraction of both C−H and C−C bonds as the carbon atoms involved vary, in s–p hybridization, along sp³ to sp² to sp. Our quantum chemical bonding analyses based on Kohn–Sham molecular orbital theory show that the generally accepted rationale behind this trend is incorrect. Inspection of the molecular orbitals and their corresponding orbital overlaps reveals that the above-mentioned shortening in C−H and C−C bonds is not determined by an increasing amount of s-character at the carbon atom in these bonds. Instead, we establish that this structural trend is caused by a diminishing steric (Pauli) repulsion between substituents around the pertinent carbon atom, as the coordination number decreases along sp³ to sp² to sp.     

Copper‐Catalyzed Decarboxylative Radical Silylation of Redox‐Active Aliphatic Carboxylic Acid Derivatives

A decarboxylative silylation of aliphatic N ‐hydroxyphthalimide (NHPI) esters using Si−B reagents as silicon pronucleophiles is reported. This C(sp³)−Si cross‐coupling is catalyzed by copper(I) and follows a radical mechanism, even with exclusion of light. Both primary and secondary alkyl groups couple effectively, whereas tertiary alkyl groups are probably too sterically hindered. The functional‐group tolerance is generally excellent, and α‐heteroatom‐substituted substrates also participate well. This enables, for example, the synthesis of α‐silylated amines starting from NHPI esters derived from α‐amino acids. The new method extends the still limited number of C(sp³)−Si cross‐couplings of unactivated alkyl electrophiles.     

Boron-Copper 1,3-Rearrangement: the New Concept Behind the Boryl Migration from C(sp2) in Alkenyl Boranes to C(sp3)

Regioselective borylcupration of borylated skipped (Z)-dienes generates diborylated alkylcopper species that are involved in an intramolecular stereospecific B/Cu 1,3-rearrangement by migration of Bpin moiety from C(sp²) to C(sp³). DFT mechanistic studies showed that boryl migration occurs through the formation of 4-membered boracycle intermediate with a moderate free-energy barrier. Moreover, the use of KOMe forms stable Lewis base adducts with Bpin moieties that blocks the reaction. Subsequently to the 1,3-boron shift, the in situ electrophilic trapping allows selective C−H, C−C and C−X bonds, followed by intramolecular cross coupling giving access to cyclic functionalized alkylidenecyclohexanes or alkylidenecyclobutanes.     

Exchanging Alkyl Groups through Unstrained C−C Bond Cleavage in the Presence of a Copper Catalyst

Although numerous reports exist on strained C−C bond cleavage reactions in aryl substitutions, the cleavage methodology for unstrained C−C bonds in alkylation reactions has not yet been established. We found that unstrained allylic C−C bonds can be cleaved using α‐radicals to form C(sp³)−C(sp³) bonds in the presence of a copper catalyst. In this reaction, the property of leaving and loading radicals is very important for radical fragmentations. In this paper, we investigated the effects of these properties in cleavage reactions for unstrained C−C bonds.     

Construction of β-Phenylalanine Derivatives through Pd-Catalyzed,C(sp2)−H (ortho) Functionalization

This paper describes the Pd(II)-catalyzed, picolinamide-directing-group-aided C(sp²)−H (ortho) functionalization of racemic and enantiopure β-phenylalanines and 3-amino-3-phenylpropanols (1,3-amino alcohols). The C(sp²)−H (ortho) functionalizations including arylation, bromination, iodination, and alkoxylation were attempted. The C(sp²)−H (ortho) arylation reactions gave biaryl or terphenyl-type β-phenylalanine scaffolds, halogenation and methoxylation reactions gave ortho C−H halogenated or methoxylated β-phenylalanines. Additionally, the C−H arylation of an ortho-methyl substituted β-phenylalanine containing both C(sp²)−H and remote C(sp³)−H bonds was investigated. β-Phenylalanine is an arylated β-amino acid motif present in various natural products, bioactive molecules, and β-peptides and it is a precursor to medicinally active compounds. Accordingly, this work contributes to the expansion of the library of unnatural β-phenylalanine (β-amino acid) derivatives through site-selective C−H functionalization.     

Synthesis of β‐Lactams by Palladium(0)‐Catalyzed C(sp3)−H Carbamoylation

A general and user‐friendly synthesis of β‐lactams is reported that makes use of Pd⁰‐catalyzed carbamoylation of C(sp³)−H bonds, and operates under stoichiometric carbon monoxide in a two‐chamber reactor. This reaction is compatible with a range of primary, secondary and activated tertiary C−H bonds, in contrast to previous methods based on C(sp³)−H activation. In addition, the feasibility of an enantioselective version using a chiral phosphonite ligand is demonstrated. Finally, this method can be employed to synthesize valuable enantiopure free β‐lactams and β‐amino acids.