N‐(3,4‐Dihydroxyphenethyl)‐3,5‐dinitrobenzamide‐Modified Multiwall Carbon Nanotubes Paste Electrode as a Novel Sensor for Simultaneous Determination of Penicillamine,Uric acid,and Tryptophan

N‐(3,4‐dihydroxyphenethyl)‐3,5‐dinitrobenzamide modified multiwall carbon nanotubes paste electrode was used as a voltammetric sensor for oxidation of penicillamine (PA), uric acid (UA) and tryptophan (TP). In a mixture of PA, UA and TP, those voltammograms were well separated from each other with potential differences of 300, 610, and 310 mV, respectively. The peak currents were linearly dependent on PA, UA and TP concentrations in the range of 0.05–300, 5–420, and 1.0–400 µmol L^?1, with detection limits of 0.021, 2.0, and 0.82 µmol L^?1, respectively. The modified electrode was used for the determination of those compounds in real samples.     

Electrochemical Determination of Uric Acid,Dopamine and Tryptophan at Zinc Hexacyanoferrate Clay Modified Electrode

A Cameroonian smectite clay has been transformed into Zn²⁺ homoionic form and then used to prepare film modified glassy carbon electrodes and carbon paste electrodes. These electrodes containing Zn²⁺ were exploited to prepare a mixed valence zinc hexacyanoferrate (ZnHCF). Cyclic voltammetry has been employed to monitor the in situ growth of ZnHCF on clay modified electrodes. Although interesting electrocatalytic properties toward UA were observed with these modified electrodes, the modified carbon paste electrodes were the most suitable for dopamine, uric acid and tryptophan detection and exhibited for these analytes extended linear range, high sensitivities, selectivity and low limit.     

聚乙烯亚胺功能化石墨烯修饰电极同时测定抗坏血酸、 多巴胺、尿酸和色氨酸

制备了聚乙烯亚胺(PEI)功能化的石墨烯(G)修饰电极以实现抗坏血酸(AA)、 多巴胺(DA)、 尿酸(UA)和色氨酸(Trp)的分离及同时测定. 采用红外光谱(FTIR)、 紫外-可见吸收光谱(UV-Vis)、 X射线粉末衍射仪(XRD)和透射电子显微镜(TEM)对电极修饰材料进行了表征, 并优化了该修饰电极同时测定AA, DA, UA和Trp的实验条件. 在聚乙烯亚胺功能化石墨烯修饰的玻碳电极(PEI-G/GCE)上实现了AA, DA, UA 和Trp氧化峰的分离, AA-DA, DA-UA和UA-Trp的氧化峰电位差分别为298, 130和350 mV. 该修饰电极对AA, DA, UA和Trp的检测线性范围分别为50~5800, 30~2570, 0.05~400和6~1000 μmol/L; 检出限分别为16.67, 10, 0.017和2 μmol/L.     

Determination of Uric Acid in the Presence of Ascorbic Acid Using Poly(3,4‐ethylenedioxythiophene)‐Modified Electrodes

A poly(3,4‐ethylenedioxythiophene) (PEDOT) modified glassy carbon electrode (GCE) was used to determine uric acid in the presence of ascorbic acid at physiological pH facilitating a peak potential separation of ascorbic acid and uric acid oxidation (ca. 365 mV), which is the largest value reported so far in the literature. Also, an analytical protocol involving differential pulse voltammetry has been developed using a microchip electrode for the determination of uric acid in the concentration range of 1 to 20 μM in presence of excess of ascorbic acid.     

Selective Electrochemical Determination of Uric Acid in the Presence of Ascorbic Acid Using a Carbon Paste Electrode Modified with β‐Cyclodextrin

Uric acid (UA) was determined in the presence of ascorbic acid (AA) by using a carbon paste electrode modified superficially by a β‐cyclodextrin film (CPE/β‐CD). The surface carbon paste electrode was prepared applying a 30 cycles potential program and using a 1 M HClO₄+0.01 M β‐CD electrolytic solution. The UA and AA solutions were used to evaluate the electrode selectivity and sensitivity by cyclic voltammetric and amperometric methods. In these experiments the detection limit for UA was (4.6±0.01)×10^?6 M and the RSD calculated from the amperometric curves was 10%. From the data obtained it was possible to quantify UA in the urine and saliva samples. Selective detection of UA was improved by formation of an inclusion complex between β‐CD and UA. The results show that the CPE/β‐CD is a good candidate due to its selectivity and sensitivity in the UA determination in complex samples like the biological fluids.     

Disposable Multiwalled Carbon Nanotube Printed Film Electrochemical Determination of Acetaminophen,Dopamine, and Uric Acid

A novel printed film consisting of multiwalled carbon nanotubes was fabricated on a polyethylene terephthalate substrate by means of a mass flexographic printing process. Potential applications of this film for electrochemical biosensing were examined through the oxidation of acetaminophen, dopamine, and uric acid in phosphate buffer (pH 7.0). The results demonstrate that the printed carbon nanotube film exhibits an enhanced electrochemical response toward these molecules. Dopamine and uric acid did not interfere with each other and, thus, their simultaneous determination may be performed. The results suggest the mass flexographic printing technique has potential application for the construction of low-cost, precise, and disposable multiwalled carbon nanotube films.     

Synthesis of Zinc Tetraaminophthalocyanine Functionalized Graphene Nanosheets as an Enhanced Material for Sensitive Electrochemical Determination of Uric Acid

A new electrochemical sensor material has been fabricated via the non‐covalent functionalization of reduced graphene oxide (rGO) and soluble tetramino zincphthalocyanines (ZnPc‐NH₂). Immobilization of uricase onto the synthesized nanohybrids can evidently improve the electrocatalytic activity and selectivity. The obtained composite membrane possesses a great enhancement of electron transfer rate and excellent synergistic electrocatalytic effect toward uric acid (UA) oxidation under the working potential at 0.620 V vs. Ag/AgCl with a scan rate of 0.125 V/s. The effects of the experimental parameters on the electrochemical oxidation responses of UA were investigated and optimized in detail. Under the optimized conditions, the peak currents were proportional to the UA concentration in a range from 0.5 to 100 μmol/L with detection limit of 0.15 μmol/L. Moreover, the developed sensor was applied for UA determination in human urine samples with high accuracy and satisfactory recovery, which is envisioned to have promising applications in monitoring UA in clinical research.     

Poly(pyridine‐3‐boronic acid)/Multiwalled Carbon Nanotubes Modified Glassy Carbon Electrodes for Simultaneous Determination of Ascorbic Acid, 3,4‐Dihydroxyphenylacetic Acid and Uric Acid

Poly(pyridine‐3‐boronic acid) (PPBA)/multiwalled carbon nanotubes (MWCNTs) composite modified glassy carbon electrode (GCE) was used for the simultaneous determination of ascorbic acid (AA), 3,4‐dihydroxyphenylacetic acid (DOPAC) and uric acid (UA). The anodic peaks for AA, DOPAC and UA at the PPBA/MWCNTs/GCE were well resolved in phosphate buffer solution (pH 7.4). The electrooxidation of AA, DOPAC and UA in the mixture solution was investigated. The peak currents increase with their concentrations increasing. The detection limits (S/N=3) of AA, DOPAC and UA are 5 µM, 3 µM and 0.6 µM, respectively.     

Determination of Electrochemical Interaction between 2‐(1H‐benzimidazol‐2‐yl) Phenol and DNA Sequences

A benzimidazole derivate, 2‐(1H‐benzimidazol‐2‐yl) phenol (2‐Bip) and its interaction mechanism with sequence specific DNA was examined with Differential Pulse Voltammetry (DPV). We, for the first time, investigated the effect of 2‐Bip on sequence specific DNA with electrochemical methods by evaluating both guanine and 2‐Bip oxidation signal changes. In the study, probe sequences were immobilized to the surface of the electrodes and then hybridization was achieved by sending the complementary target onto the probe modified electrodes. Following the hybridization, 2‐Bip solution was interacted with probe and hybrid sequences to see the effect of 2‐Bip on different DNA sequences. The binding constant (K), toxicity (S%) and thermodynamic parameters, i. e., Gibbs free energy (ΔG°) of 2‐Bip‐DNA complexes were evaluated. K was calculated as 5×10⁵ and the change in the ΔG° was found as ?32.50 kJ mol^?1, which are consistent well with the literature. Furthermore, S% showed that 2‐Bip is moderately toxic to single stranded DNA (ssDNA) and toxic to double stranded DNA (dsDNA). From our experimental data, we made four conclusions (i) 2‐Bip affects both ssDNA and dsDNA, (ii) 2‐Bip interaction mode with DNA could be non‐covalent interactions, (iii) 2‐Bip could be used as new DNA hybridization indicator due to its distinct effects on ssDNA and dsDNA, (iv) 2‐Bip could be used as a drug molecule for its DNA effect.     

Fabrication of Electrochemical Sensor Based on CeO2−SnO2 Nanocomposite Loaded on Pd Support for Determination of Nitrite at Trace Levels

Here, an electrochemical sensor based on CeO₂‐SnO₂/Pd was prepared and used for highly selective and sensitive determination of nitrite in some real samples. This nanocomposite was characterized by various methods like X‐ray photoelectron spectroscopy, X‐ray diffraction, energy dispersive spectroscopy, Fourier‐transform infrared spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy. The electrochemical behavior of the sensor was evaluated by cyclic voltammetry. The results showed excellent catalytic property of the nanocomposite as a an electrocatalyst for nitrite oxidation. In the following, the experimental parameters affecting the analytical signal for nitrite were optimized. Under the optimal conditions, the limit of detection and sensitivity of the sensor were calculated as 0.10 μM and 652.95 μA.mM^?1.cm^?2, respectively. Also, the response of the sensor was linear in the range of 0.36 to 2200 μM of nitrite. Finally, some of the inherent features of the sensor such as repeatability, reproducibility and stability were examined after evaluation of the sensor selectivity in the presence of several interfering species.     

Superior Performance of a MoS2‐RGO Composite and a Borocarbonitride in the Electrochemical Detection of Dopamine,Uric Acid and Adenine

A MoS₂‐RGO composite and borocarbonitride (BC₅N) have been used as electrodes to selectively detect dopamine and uric acid in the presence of ascorbic acid. Both the electrodes show excellent eletrocatalytic activity towards the detection of dopamine, the detection limits being 0.55 μM and 2.1 μM in the case of MoS₂‐RGO and BCN respectively. MoS₂‐RGO shows a linear range of current over the 1–110 μM concentrations of dopamine, while BCN shows over the 2.3–20 μM range. BCN also exhibits satisfactory performance in the oxidation of uric acid with a detection limit of 3.8 μM and the linear range from 4 to 40 μM. The MoS₂‐RGO has also been used to detect adenine as well.     

Determination of Ascorbic Acid in the Presence of Uric Acid and Folic Acid by a Nanostructured Electrochemical Sensor Based on a TiO2 Nanoparticle Carbon Paste Electrode

A carbon paste electrode (CPE), modified with novel hydroquinone/TiO₂ nanoparticles, was designed and used for simultaneous determination of ascorbic acid (AA), uric acid (UA) and folic acid (FA). The magnitude of the peak current for modified TiO₂-nanoparticle CPE (MTNCPE) increased sharply in the presence of ascorbic acid and was proportional to its concentration. A dynamic range of 1.0–1400.0 μM, with the detection limit of 6.4 × 10^?7 M for AA, was obtained using the DPV technique (pH = 7.0). The prepared electrode was successfully applied for the determination of AA, UA, and FA in real samples.     

Poly(cytosine)‐templated Silver Nanoclusters as Fluorescent Biosensor for Highly Sensitive Detection of Uric Acid

Uric acid (UA) is an important biomarker in urine and serum samples for early diagnosis. This study re‐ ports a fluorescent biosensor based on Poly(cytosine)‐templated silver nanoclusters (C‐Ag NCs) and uricase for the highly sensitive and fast detection of UA. The strong fluorescence of the C‐Ag NCs prepared from poly (cytosine) nucleotides templates could be sensitively quenched by trace amount of H₂O₂, which produced from oxidation reaction of UA catalyzed by uricase. This biosensor exhibits two linear ranges as 50 nM～50 μM and 50 μM～400 μM, with a detection limit of 50 nM. The sensitivity of the biosensor is considerably improved compared with the methods reported in the literature. Furthermore, the detection ability of uric acid in serum samples is confirmed and this C‐Ag NCs‐based uric acid biosensor shows good promise of practical application.     

Preparation,Characterization and Electrochemical Application of ZnS/ZnAl2S4 Nanocomposite for Voltammetric Determination of Methionine and Tryptophan Using Modified Carbon Paste Electrode

ZnS/ZnAl₂S₄ nanocomposite and 2‐chlorobenzoyl ferrocene, were synthesized and used to construct a modified carbon paste electrode. The electrooxidation of methionine at the surface of the modified electrode was studied. Under the optimized conditions, the square wave voltammetric (SWV) peak current of methionine increased linearly with methionine concentration in the range of 5.0×10^?8 to 8.0×10^?4 M and detection limit of 10.0 nM was obtained for methionine. The prepared modified electrode exhibits a very good resolution between the voltammetric peaks of methionine and tryptophan which makes it suitable for the detection of methionine in the presence of tryptophan in real samples.     

Gold Nanoparticles‐β‐Cyclodextrin‐Chitosan‐Graphene Modified Glassy Carbon Electrode for Ultrasensitive Detection of Dopamine and Uric Acid

The nanocomposite (denoted as GR‐AuNPs‐CD‐CS) of graphene (GR), gold nanoparticles (AuNPs), chitosan (CS) and β‐cyclodextrin (β‐CD) was prepared to modify a glassy carbon electrode. The as‐modified electrode was explored for the ultrasensitive detection of dopamine (DA) and uric acid (UA). The modified electrode demonstrated linearly increased current response in the concentration range of 0.1–120 µm for DA and 0.05–70 µm for UA, with so far the best detection limit for DA and UA. Good stability and repeatability were further demonstrated for the as‐made sensor.     

Silver Doped Poly(L‐valine) Modified Glassy Carbon Electrode for the Simultaneous Determination of Uric Acid,Ascorbic Acid and Dopamine

In this paper, a silver doped poly(L ‐valine) (Ag‐PLV) modified glassy carbon electrode (GCE) was fabricated through electrochemical immobilization and was used to electrochemically detect uric acid (UA), dopamine (DA) and ascorbic acid (AA) by linear sweep voltammetry. In pH 4.0 PBS, at a scan rate of 100 mV/s, the modified electrode gave three separated oxidation peaks at 591 mV, 399 mV and 161 mV for UA, DA and AA, respectively. The peak potential differences were 238 mV and 192 mV. The electrochemical behaviors of them at the modified electrode were explored in detail with cyclic voltammetry. Under the optimum conditions, the linear ranges were 3.0×10^?7 to 1.0×10^?5 M for UA, 5.0×10^?7 to 1.0×10^?5 M for DA and 1.0×10^?5 to 1.0×10^?3 M for AA, respectively. The method was successfully applied for simultaneous determination of UA, DA and AA in human urine samples.     

2,2‐Bis(3‐Amino‐4‐hydroxyphenyl)hexafluoropropane Modified Glassy Carbon Electrodes as Selective and Sensitive Voltammetric Sensors. Selective Detection of Dopamine and Uric Acid

2,2‐bis(3‐Amino‐4‐hydroxyphenyl)hexafluoropropane (BAHHFP) was electro‐polymerized oxidatively on glassy carbon by cyclic voltammetry. The activity of the modified electrode towards ascorbic acid (AA), uric acid (UA) and dopamine (DA) was characterized with cyclic voltammetry and differential puls voltammetry (DPV). The findings showed that the electrode modification drastically suppresses the response of AA and shifts it towards more negative potentials. Simultaneously an enhancement of reaction reversibility is seen for DA and UA. Unusual, selective preconcentration features are observed for DA when the polymer‐modified electrode is polarized at negative potential. In a ternary mixture containing the three analytes studied, three baseline resolved peaks are observed in DPV mode. At physiological pH 7.4, after 5 min preconcentration at ?300 mV, peaks positions were ?0.073, 0.131 and 0.280 V (vs. Ag/AgCl) for AA, DA and UA, respectively. Relative selectivities DA/AA and UA/AA were over 4000 : 1 and 700 : 1, respectively. DA response was linear in the range 0.05–3 μM with sensitivity of 138 μA μM^?1 cm^?2 and detection limit (3σ) of 5 nM. Sensitive quantification of UA was possible in acidic solution (pH 1.8). Under such conditions a very sharp peak appeared at 630 mV (DPV). The response was linear in the range 0.5–100 μM with sensitivity of 4.67 μA μM^?1 cm^?2 and detection limit (3σ) of 0.1 μM. Practical utility was illustrated by selective determination of UA in human urine.     

Study on the Electrochemical Behavior of Dopamine and Uric Acid at a 2‐Amino‐5‐mercapto‐[1,3,4] Triazole Self‐Assembled Monolayers Electrode

Selected from a series of structurally related heteroaromatic thiols, a newly synthesized reagent 2‐amino‐5‐mercapto‐[1,3,4] triazole (MATZ) was used to fabricate self‐assembled monolayers (SAMs) on gold electrode for the first time. The MATZ/Au SAMs was characterized by electrochemical methods and scanning electronic microscopy (SEM). In 0.04 mol/L Britton–Robinson buffer solution (pH 5), the electrochemical behavior of dopamine showed a quasireversible process at the MATZ/Au SAMs with an electrode kinetic constant 0.1049 cm/s. However, the electrochemical reaction of uric acid at the SAMs electrode showed an irreversible oxidation process, the charge‐transfer kinetics of uric acid was promoted by the SAMs. By Osteryoung square‐wave voltammetry (OSWV), the simultaneous determination of dopamine and uric acid can be accomplished with an oxidation peak separation of 0.24 V, the peak current of dopamine and uric acid were linearly to its concentration in the range of 2.5×10^?6–5.0×10^?4 mol/L for dopamine and 1×10^?6–1×10^?4 mol/L for uric acid with a detection limit of 8.0×10^?7 mol/L for dopamine and 7.0×10^?7 mol/L for uric acid. The MATZ/Au SAMs electrode was used to detect the content of uric acid in real urine and serum sample with satisfactory results.     

Simultaneous Determination of Ascorbic Acid,Dopamine and Uric Acid Based on Gold Nanoparticles‐PTCA‐Cys Composites Modified Electrodes

In this study, a nanocomposite of 3, 4, 9, 10‐perylenetetracarboxylic acid and L‐cysteine (PTCA‐Cys) with satisfactory water‐solubility and film‐forming ability was prepared and worked as substrate for modifying the glassy carbon electrode. Then, gold nanoparticles (AuNPs) were immobilized to achieve a PTCA‐Cys‐AuNPs modified electrode which provided more reaction positions on the sensor. Scanning electron microscopy, transmission electron microscopy, cyclic voltammetry and different pulse voltammetry were employed to characterize the assembly process of the sensor. The constructed sensor displayed desirable sensitivity, selectivity and stability towards the simultaneous detection of ascorbic acid (AA), dopamine (DA) and uric acid (UA). Under the optimal experimental conditions, the oxidation peaks of AA, DA and UA appeared at 64, 240 and 376 mV, respectively. The corresponding linear response ranges were 3.2–435, 0.04–100 and 0.80–297 μM, and the detection limits were 1.1, 0.010 and 0.27 μM (S/N=3), respectively.