Magnetic nanomaterials for the removal,separation and preconcentration of organic and inorganic pollutants at trace levels and their practical applications: A review

The presence of organic and inorganic pollutants in nature even in very small concentrations threatens human and other living bodies health and makes it significant to remove, separate and preconcentrate these pollutants. Recently magnetic nano sorbents has been used frequently in the separation and preconcentration of these pollutants. The use of magnetic nano sorbents modified with inorganic and organic species has widespread applications in the solid phase extraction (SPE) studies due to its many unique properties. These modified nano sorbents are preferred due to their advantages such as high adsorption capacities and large surface areas. This review examined different types of magnetic materials such as magnetic carbon-based nano sorbents, inorganic nano sorbents with magnetic properties, magnetized biosorbents, magnetic metal-organic frameworks, and magnetized ionic liquids used in SPE studies. In this study, a comprehensive and systematic review of the separation and preconcentration of analytes such as heavy metal ions, drug active substances, pesticides, dyes, hormone disruptors, etc with SPE methods using magnetic nanomaterials has been revealed. Future aspects and challenges that may be encountered are discussed.     

Chitosan-based adsorbents for analytical sample preparation and removal of pollutants from aqueous media: Progress,challenges and outlook

The development of greener and more efficient materials for extracting environmental contaminants from various matrices is a growing area of research. Materials that do not cause secondary pollution are highly desirable in such applications. Chitosan (CS) is a non-toxic biopolymer enriched with amino and hydroxyl groups, used not only for extracting pollutants but also for crosslinking and functionalizing CS with other materials. The composites of CS with carbon, metal-organic frameworks, metal and metal oxide nanoparticles, and magnetic materials have been used to extract various inorganic and organic analytes in aqueous samples. CS-based sorbents have been evaluated across multiple extraction techniques, such as dispersive solid phase extraction, magnetic solid phase extraction, solid phase microextraction, syringe solid phase extraction, membrane-protected solid phase extraction, and others. This review offers an overview of the CS-based sorbents in analytical extractions, highlighting their strengths, weaknesses, and potential solutions. At the end, a brief overview of the CS-based adsorbents in water treatment applications is also provided.     

Solid phase extraction for the speciation and preconcentration of inorganic selenium in water samples: A review

Selenium is an essential element for the normal cellular function of living organisms. However, selenium is toxic at concentrations of only three to five times higher than the essential concentration. The inorganic forms (mainly selenite and selenate) present in environmental water generally exhibit higher toxicity (up to 40 times) than organic forms. Therefore, the determination of low levels of different inorganic selenium species in water is an analytical challenge. Solid-phase extraction has been used as a separation and/or preconcentration technique prior to the determination of selenium species due to the need for accurate measurements for Se species in water at extremely low levels. The present paper provides a critical review of the published methods for inorganic selenium speciation in water samples using solid phase extraction as a preconcentration procedure. On the basis of more than 75 references, the different speciation strategies used for this task have been highlighted and classified. The solid-phase extraction sorbents and the performance and analytical characteristics of the developed methods for Se speciation are also discussed.     

新型样品前处理材料在环境污染物分析检测中的研究进展

针对复杂样品的分析和痕量目标物的检测,样品前处理是必不可少的,高效的样品前处理技术不仅可以去除或减小样品基质干扰而且能够实现分析物的富集,提高分析检测的准确性和灵敏度.近年来,固相萃取、磁分散固相萃取、枪头固相萃取、搅拌棒萃取、固相微萃取等高效的样品前处理技术已在环境污染物分析检测中获得广泛关注,萃取效率主要取决于萃取...     

Analytical Extraction Methods and Sorbents’ Development for Simultaneous Determination of Organophosphorus Pesticides’ Residues in Food and Water Samples: A Review

Extensive use of organophosphorus pesticides in agriculture leads to adverse effects to the environment and human health. Sample preparation is compulsory to enrich target analytes prior to detection as they often exist at trace levels and this step is critical as it determines the concentration of pollutants present in samples. The selection of a suitable extraction method is of great importance. The analytical performance of the extraction methods is influenced by the selection of sorbents as sorbents play a vital role in the sensitivity and selectivity of an analytical method. To date, numerous sorbent materials have been developed to cater to the needs of selective and sensitive pesticides’ detection. Comprehensive details pertaining to extraction methods, developed sorbents, and analytical performance are provided. This review intended to provide a general overview on different extraction techniques and sorbents that have been developed in the last 10 years for organophosphorus pesticides’ determinations in food and water samples.     

Recent applications of metal–organic frameworks in sample pretreatment

Metal–organic frameworks are promising materials in diverse analytical applications especially in sample pretreatment by virtue of their diverse structure topology, tunable pore size, permanent nanoscale porosity, high surface area, and good thermostability. According to hydrostability, metal–organic frameworks are divided into moisture‐sensitive and water‐stable types. In the actual applications, both kinds of metal–organic frameworks are usually engineered into hybrid composites containing magnetite, silicon dioxide, graphene, or directly carbonized to metal–organic frameworks derived carbon. These metal–organic frameworks based materials show good extraction performance to environmental pollutants. This review provides a critical overview of the applications of metal–organic frameworks and their composites in sample pretreatment modes, that is, solid‐phase extraction, magnetic solid‐phase extraction, micro‐solid‐phase extraction, solid‐phase microextraction, and stir bar solid extraction.     

Surface Modification of Graphene Oxides by Plasma Techniques and Their Application for Environmental Pollution Cleanup

Graphene oxides (GOs) have come under intense multidisciplinary study because of their unique physicochemical properties and possible applications. The large amount of oxygen‐containing functional groups on GOs leads to a high sorption capacity for the removal of various kinds of organic and inorganic pollutants from aqueous solutions in environmental pollution cleanup. However, the lack of selectivity results in difficulty in the selective removal of target pollutants from aqueous solutions in the presence of other coexisting pollutants. Herein, the surface grafting of GOs with special oxygen‐containing functional groups using low‐temperature plasma techniques and the application of the surface‐modified GOs for the efficient removal of organic and inorganic pollutants in environmental pollution are reviewed. This paper gives an account of our research on the application of GO‐based nanomaterials in environmental pollution cleanup, including: (1) the synthesis and surface grafting of functional groups on GOs, summarizing various types of low‐temperature plasma techniques for the synthesis of graphene/GOs; and (2) the application of graphene/GOs and their composites for the efficient removal of organic and inorganic pollutants from aqueous solutions, including the interaction mechanism according to recently published results.     

离子液体基磁性固相萃取技术的研究进展

磁性固相萃取(Magnetic solid-phase extraction,MSPE)是一种采用磁性材料作为吸附剂的新型样品前处理技术,发展新型的磁性材料作为吸附剂是MSPE领域的研究热点。用离子液体(Ionic liquid,IL)修饰磁性材料作为吸附剂既具有MSPE操作简单、萃取快速、基质干扰小的优点,又兼具IL结构的可设计性和易功能化的优点,在样品前处理领域引起了广泛关注。该文综述了IL修饰磁性吸附剂的制备方法(物理涂敷、化学键合和包埋法),IL-MSPE的萃取方式(传统的MSPE,混合半胶束-MSPE和分散液液微萃取-MSPE),以及IL-MSPE在有机污染物、金属离子和生物活性物质萃取分离中的应用,并对该技术的发展趋势进行了展望。     

Nanosorbents as Materials for Extraction Processes of Environmental Contaminants and Others

The aim of this work focuses on the application of nanomaterials (NMs) in different sorptive extraction techniques for the analysis of organic contaminants from environmental samples of distinct matrix compositions. Without any doubt, the integration of specific NMs such as carbonaceous nanomaterials, magnetic nanoparticles (MNPs), metal–organic frameworks (MOFs), silica nanoparticles, and ion-imprinted NPs with solid-phase extraction techniques counting d-SPE, solid-phase microextraction (SPME), and stir bar sorptive extraction (SBSE) impact on the improvements in analytical performance. The application of NMs as sorbents in the extraction of organic pollutants in environmental samples allows for providing better sensitivity, repeatability, reproducibility, and reusability.     

Fabric Phase Sorptive Extraction: A Paradigm Shift Approach in Analytical and Bioanalytical Sample Preparation

Fabric phase sorptive extraction (FPSE) is an evolutionary sample preparation approach which was introduced in 2014, meeting all green analytical chemistry (GAC) requirements by implementing a natural or synthetic permeable and flexible fabric substrate to host a chemically coated sol–gel organic–inorganic hybrid sorbent in the form of an ultra-thin coating. This construction results in a versatile, fast, and sensitive micro-extraction device. The user-friendly FPSE membrane allows direct extraction of analytes with no sample modification, thus eliminating/minimizing the sample pre-treatment steps, which are not only time consuming, but are also considered the primary source of major analyte loss. Sol–gel sorbent-coated FPSE membranes possess high chemical, solvent, and thermal stability due to the strong covalent bonding between the fabric substrate and the sol–gel sorbent coating. Subsequent to the extraction on FPSE membrane, a wide range of organic solvents can be used in a small volume to exhaustively back-extract the analytes after FPSE process, leading to a high preconcentration factor. In most cases, no solvent evaporation and sample reconstitution are necessary. In addition to the extensive simplification of the sample preparation workflow, FPSE has also innovatively combined the extraction principle of two major, yet competing sample preparation techniques: solid phase extraction (SPE) with its characteristic exhaustive extraction, and solid phase microextraction (SPME) with its characteristic equilibrium driven extraction mechanism. Furthermore, FPSE has offered the most comprehensive cache of sorbent chemistry by successfully combining almost all of the sorbents traditionally used exclusively in either SPE or in SPME. FPSE is the first sample preparation technique to exploit the substrate surface chemistry that complements the overall selectivity and the extraction efficiency of the device. As such, FPSE indeed represents a paradigm shift approach in analytical/bioanalytical sample preparation. Furthermore, an FPSE membrane can be used as an SPME fiber or as an SPE disk for sample preparation, owing to its special geometric advantage. So far, FPSE has overwhelmingly attracted the interest of the separation scientist community, and many analytical scientists have been developing new methodologies by implementing this cutting-edge technique for the extraction and determination of many analytes at their trace and ultra-trace level concentrations in environmental samples as well as in food, pharmaceutical, and biological samples. FPSE offers a total sample preparation solution by providing neutral, cation exchanger, anion exchanger, mixed mode cation exchanger, mixed mode anion exchanger, zwitterionic, and mixed mode zwitterionic sorbents to deal with any analyte regardless of its polarity, ionic state, or the sample matrix where it resides. Herein we present the theoretical background, synthesis, mechanisms of extraction and desorption, the types of sorbents, and the main applications of FPSE so far according to different sample categories, and to briefly show the progress, advantages, and the main principles of the proposed technique.     

Application of an ampholine‐functionalized hybrid organic–inorganic silica material for the SPE of aromatic amines

An SPE cartridge based on an ampholine‐functionalized hybrid organic–inorganic silica sorbent has been adopted for the analysis of aromatic amines including 4‐aminobiphenyl, benzidine, 2‐naphthylamine, p‐chloroaniline, 2,4,5‐trimethylaniline, and 3,3′‐dichlorobenzidine. Crucial variables governing the extraction efficiency of the material such as the pH of sample, sample loading volume, solvent used for elution, and elution volume have been thoroughly optimized. The adsorption capacities for the six aromatic amines ranged from 0.17 to 1.82 μg/mg. The recoveries of aromatic amines spiked in textile samples ranged from 78.9 to 103.0%, with RSDs of 1.1–11.9% (n = 3). Moreover, the extraction efficiency of the ampholine‐functionalized hybrid organic–inorganic silica sorbent was at least comparable with that of Oasis WCX.     

Critical evaluation and comparison of enrichment efficiency of multi-walled carbon nanotubes, C18 silica and activated carbon towards some pesticides from environmental waters

In this work, optimization of multi-residue solid phase extraction (SPE) procedures coupled with high-performance liquid chromatography for the determination of Propoxur, Atrazine and Methidathion from environmental waters is reported. Three different sorbents were used in this work: multi-walled carbon nanotubes (MWCNTs), C18 silica and activated carbon (AC). The three optimized SPE procedures were compared in terms of analytical performance, application to environmental waters, cartridge re-use, adsorption capacity and cost of adsorbent. Although the adsorption capacity of MWCNT was larger than AC and C18, however, the analytical performance of AC could be made close to the other sorbents by appropriate optimization of the SPE procedures. A sample of AC was then oxidized with various oxidizing agents to show that ACs of various surface properties has different enrichment efficiencies. Thus researchers are advised to try AC of various surface properties in SPE of pollutants prior to using expensive sorbents (such as MWCNT and C18 silica).     

Methods for determination of polybrominated diphenyl ethers in environmental samples - review

Polybrominated diphenyl ethers (PBDEs) are a group of persistent organic pollutants. They are used as flame retardants in plastics, paints, varnishes and textile materials. PBDEs pose great risk to the environment because of their high persistence and ability to get into the environment easily due to the lack of chemical bonds with the matrix of materials, to which they are added. Global research studies confirmed the occurrence of those compounds in the majority of elements of water and land environment. Analysis of PBDEs in environmental samples is one of the specific analytical methods of criteria that comprise low detection limits and high selectivity. The analysis of PBDEs in environmental samples is one of the specific analytical methods, in which the main criteria are low detection limits and high selectivity. In this article, a literature review of methods for environmental sample preparation and analysis of the PBDE content was presented. The article discusses the potential of modern extraction techniques such as: solid-phase microextraction, single-drop microextraction, dispersive liquid-liquid microextraction, microwave-assisted extraction, cloud point extraction, hollow fibre-liquid phase microextraction and others for the separation of PBDEs from environmental samples with a complex matrix. Among the methods for qualitative and quantitative determination of PBDEs, a particular focus was put on gas chromatography/mass spectrometry with various injection techniques and different types of sample ionisation.     

石墨烯应用于样品前处理的研究进展

样品前处理技术在样品分析中发挥着越来越重要的作用,而对分析物的富集能力和对样品基体的净化程度主要取决于高效的样品前处理材料,所以发展高性能的样品前处理材料一直是该领域的前沿研究方向。近年来,各类先进材料已经被引入样品前处理领域,发展了多种高性能的萃取材料。由于独特的物理化学性质,石墨烯已在各个研究领域获得广泛关注,在样品前处理领域也发挥着重要作用。基于高的比表面积、大的π电子结构、优异的吸附性能、丰富的官能团和易于化学改性等优点,石墨烯和氧化石墨烯基萃取材料被成功应用于各种样品的前处理,对不同领域中多种类型分析物表现出优异的萃取性能。该论文总结和讨论了近3年来石墨烯材料(石墨烯、氧化石墨烯及其功能化材料)在柱固相萃取、分散固相萃取、磁性固相萃取、搅拌棒萃取、纤维固相微萃取和管内固相微萃取等方面的研究进展。基于多种萃取机理如π-π、静电、疏水、亲水、氢键等相互作用,石墨烯萃取材料能够高效萃取和选择性富集不同类别的目标分析物,如重金属离子、多环芳烃、塑化剂、雌激素、药物分子、农药残留、兽药残留等。基于新型石墨烯萃取材料的各种样品前处理技术与多种检测技术如色谱、质谱、原子吸收光谱等联用,广泛应用于环境监测、食品安全和生化分析等领域。最后,总结了石墨烯在样品前处理领域中存在的问题,并展望了未来的发展趋势。     

Inorganic membranes and solid state sciences

The latest developments in inorganic membranes are closely related to recent advances in solid state science. Sol–gel processing, plasma-enhanced chemical vapor deposition and hydrothermal synthesis are methods that can be used for inorganic membrane preparation. Innovative concepts from material science (templating effect, nanophase materials, growing of continuous zeolite layers, hybrid organic–inorganic materials) have been applied by our group to the preparation of inorganic membrane materials. Sol–gel-derived nanophase ceramic membranes are presented with current applications in nanofiltration and catalytic membrane reactors. Silica membranes with an ordered porosity, due to liquid crystal phase templating effect, are described with potential application in pervaporation. Defect-free and thermally stable zeolite membranes can be obtained through an original synthesis method, in which zeolite crystals are grown inside the pores of a support. Hybrid organic–inorganic materials with permselective properties for gas separation and facilitated transport of solutes in liquid media, have been successfully adapted to membrane applications. Potential membrane developments offered by CVD deposition techniques are also illustrated through several examples related to the preparation of purely inorganic and hybrid organic–inorganic membrane materials.     

The recent developments in dispersive liquid–liquid microextraction for preconcentration and determination of inorganic analytes

Recently, increasing interest on the use of dispersive liquid–liquid microextraction (DLLME) developed in 2006 by Rezaee has been found in the field of separation science. DLLME is miniaturized format of liquid–liquid extraction in which acceptor-to-donor phase ratio is greatly reduced compared with other methods. In the present review, the combination of DLLME with different analytical techniques such as atomic absorption spectrometry (AAS), inductively coupled plasma-optical emission spectrometry (ICP-OES), gas chromatography (GC), and high-performance liquid chromatography (HPLC) for preconcentration and determination of inorganic analytes in different types of samples will be discussed. Recent developments in DLLME, e.g., displacement-DLLME, the use of an auxiliary solvent for adjustment of density of extraction mixture, and the application of ionic liquid-based DLLME in determination of inorganic species even in the presence of high content of salts are presented in the present review. Finally, comparison of DLLME with the other liquid-phase microextraction approaches and limitations of this technique are provided.     

Organic–inorganic hybrid fluorous monolithic capillary column for selective solid‐phase microextraction of perfluorinated persistent organic pollutants

A novel construction strategy of monolithic capillary column for selectively enriching perfluorinated persistent organic pollutants was proposed. The organic–inorganic hybrid fluorous monolithic capillary column was synthesized by a “one‐pot” approach via the polycondensation of γ‐methacryloxypropyltrimethoxy‐silane, then in situ copolymerization of 1H,1H,7H‐dodecafluoroheptyl methacrylate and vinyl group on the precondensed siloxanes. The obtained monolithic columns were systematically characterized. The results demonstrated that the optimal column possessed good mechanical stability and high permeability. The adsorption capacities of the optimized monolithic column for perfluorooctanoic acid and perfluorooctane sulfonate were 0.257 and 0.513 μg/mg, respectively. Adsorption capacities of the monoliths were proved to increasing with increasing the amounts of fluorinated monomers in the fluorous monoliths. Sodium 1‐octanesulfonate, as a comparison compound, was hardly adsorbed on the fluorous monolith. In addition, the trace amounts of perfluorooctanoic acid and perfluorooctane sulfonate in water samples can be successfully concentrated about 160 times to their original concentrations by this monolithic column. These results demonstrated that the capacity and selectivity of the affinity fluorous column is high and can be applied to the selective enrichment for the perfluorinated persistent organic pollutants from environmental samples.     

Review of the QuEChERS method for the analysis of organic pollutants: Persistent organic pollutants,polycyclic aromatic hydrocarbons,and pharmaceuticals

In multi-residue pesticide analysis, the quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction method has replaced less efficient traditional extraction methods due to its many advantages. In addition to pesticide analysis, this method has been widely used for the detection and analysis of pharmaceuticals, polycyclic aromatic hydrocarbons (PAHs), and several persistent organic pollutants (POPs), including dioxins, polychlorinated biphenyls, perfluoroalkyl substances, and brominated flame retardants in food, biological, and environmental matrices. The analysis of PAHs and POPs is challenging due to the properties of the target compounds and their low concentrations in complex matrices. This review summarizes previously reported the QuEChERS extraction approaches to the analysis of a wide range of analytes. The QuEChERS approaches, which include dispersive solid phase extraction (d-SPE), have generally been combined with either gas chromatography–mass spectrometry (GC–MS) or liquid chromatography–mass spectrometry (LC–MS) analysis. Further on, in recent years, GC and LC-tandem mass spectrometry has been utilized with the QuEChERS extraction due to its high selectivity, sensitivity, and specificity. This enables the extraction methods for target analytes to be modified through the selection of different extraction solvents, salt formulations, and buffers for salting-out partitioning and the selection of different d-SPE and SPE sorbents for the clean-up process. The most significant advantage of this method is that concentration steps are not required. This review aims to provide an up-to-date overview of information regarding the modification of extraction techniques based on target compounds and sample matrices.     

Magnetic polymer nanocomposites for environmental and biomedical applications

Hybrid nanomaterials have received voluminous interest due to the combination of unique properties of organic and inorganic component in one material. In this class, magnetic polymer nanocomposites are of particular interest because of the combination of excellent magnetic properties, stability, and good biocompatibility. Organic–inorganic magnetic nanocomposites can be prepared by in situ, ex situ, microwave reflux, co-precipitation, melt blending, and ceramic–glass processing and plasma polymerization techniques. These nanocomposites have been exploited for in vivo imaging, as superparamagnetic or negative contrast agents, drug carriers, heavy metal adsorbents, and magnetically recoverable photocatalysts for degradation of organic pollutants. This review article is mainly focused on fabrication of magnetic polymer nanocomposites and their applications. Different types of magnetic nanoparticles, methods of their synthesis, properties, and applications have also been reviewed briefly. The review also provides detailed insight into various types of magnetic nanocomposites and their synthesis. Diverse applications of magnetic nanocomposites including environmental and biomedical uses have been discussed.     

Sol–gel niobia sorbent with a positively charged octadecyl ligand providing enhanced enrichment of nucleotides and organophosphorus pesticides in capillary microextraction for online HPLC analysis

A niobia‐based sol–gel organic–inorganic hybrid sorbent carrying a positively charged C₁₈ ligand (Nb₂O₅‐C₁₈(+ve)) was synthesized to achieve enhanced enrichment capability in capillary microextraction of organophosphorus compounds (which include organophosphorus pesticides and nucleotides) before their online analysis by high‐performance liquid chromatography. The sorbent was designed to simultaneously provide three different types of molecular level interactions: electrostatic, Lewis acid–base, and van der Waals interactions. To understand relative contributions of various molecular level analyte–sorbent interactions in the extraction process, two other sol–gel niobia sorbents were also created: (a) a purely inorganic sol–gel niobia sorbent (Nb₂O₅) and (b) an organic–inorganic hybrid sol–gel niobia sorbent carrying an electrically neutral‐bonded octadecyl ligand (Nb₂O₅‐C₁₈). The extraction efficiency of the created sol–gel niobia sorbent (Nb₂O₅‐C₁₈ (+ve)) was compared with that of analogously designed and synthesized titania‐based sol–gel sorbent (TiO₂‐C₁₈ (+ve)), taking into consideration that titania‐based sorbents present state‐of‐the‐art extraction media for organophosphorus compounds. In capillary microextraction with high‐performance liquid chromatography analysis, Nb₂O₅‐C₁₈ (+ve) had shown 40–50% higher specific extraction values (a measure of extraction efficiency) over that of TiO₂‐C₁₈ (+ve). Compared to TiO₂‐C₁₈(+ve), Nb₂O₅‐C₁₈(+ve) also provided superior analyte desorption efficiency (96 vs. 90%) during the online release of the extracted organophosphorus pesticides from the sorbent coating in the capillary microextraction capillary to the chromatographic column using reversed‐phase high‐performance liquid chromatography mobile phase.