A Facile Synthesis of Novel (Z)‐ethyl‐3‐(5‐substituted‐1‐alkyl/aryl‐1H‐indol‐3‐yl)‐2‐(1H‐tetrazol‐5‐yl)acrylate

A novel route was developed for synthesis of high potential 1H‐tetrazoles by using conventional method. Tetrazole scaffold is a promising pharmacophore fragment, frequently used in the development of various novel drugs. Here, the novel (Z)‐3‐(N‐alkyl‐indol‐3‐yl)‐2‐(1H‐tetrazole‐5‐yl)acrylates 5 ( a – i ) have been synthesized from (Z)‐ethyl‐3‐(1H‐indol‐3‐yl)2‐(1H‐tetrazol‐5‐yl)acrylates 4 ( a – c ) by using various alkylating agents such as Dimethyl Sulphate (DMS), Diethyl Sulphate (DES), and benzyl chloride; 4 ( a – c ) were synthesized from sodium azide in the presence of copper sulfate in dimethylformamide; 3 ( a – c ) have been prepared by Knoevenagel condensation of indole‐3‐carbaldehyde 1 ( a – c ) and ethylcyanoacetate 2 in the presence of L‐Proline as a catalyst at room temperature in ethanol for an hour. This is an efficient and clean click chemistry method that has various advantages such as easy workup, higher yields, shorter reaction times, and more economical.     

Regioselective Synthesis and Antibacterial Activity Studies of 1,2,3‐Triazol‐4‐YL]‐4‐methyl‐2H‐chromen‐2‐ones

Synthesis, spectral analysis, and antibacterial activity of new coumarin derivatives are described in this paper. Twelve new coumarin derivatives were synthesized in moderate to good yields by the react with 4‐methyl‐6‐(prop‐2‐ynyloxy)‐2H‐chromen‐2‐one ( 3a – c ) and ethyl azide ( 4a – l ) and done by the click reaction to obtained 6‐[(l‐ethyl‐lH‐l,2,3‐triazol‐4‐yl)methoxy]‐4‐methyl‐2H‐chromen‐2‐ones ( 5a – l ). The structures of all the newly synthesized molecules were assigned by elemental analysis and spectral data. The synthesized compounds were screened for their antibacterial activities strains using Cup plate method.     

Click Inspired Synthesis of 1,2,3‐Triazole‐linked 1,3,4‐Oxadiazole Glycoconjugates

The glycoconjugation of biologically privileged 1,3,4‐oxadiazole scaffold is described via Cu(I)‐catalyzed azide–alkyne cycloaddition. A series of glycosyl alkynes 1b – i , obtained from various commercial sugars, were treated with azide functionalized 1,3,4‐oxadiazole using click chemistry to access triazole‐linked glycosylated 1,3,4‐oxadiazoles 10b – i in good yields. The structure of the developed glycoconjugates has been ascertained by extensive spectroscopic analysis (¹H &¹³C NMR, IR, and MS).     

Synthesis and Antimicrobial Activity of 2‐(4‐(Hydroxyalkyl)‐1H‐1,2,3‐triazol‐1‐yl)‐N‐substituted propanamides

A series of 21 2‐(4‐(hydroxyalkyl)‐1H ‐1,2,3‐triazol‐1‐yl)‐N ‐substituted propanamides (1,4‐disubstituted 1,2,3‐triazoles having amide linkage and hydroxyl group) have been synthesized from click reaction between terminal alkyne and 2‐azido‐N ‐substituted propanamide (generated in situ from reaction of 2‐bromo‐N ‐substituted propanamide and sodium azide) and characterized by FTIR, ¹H NMR, ¹³C NMR spectroscopy, and HRMS. All the newly synthesized triazoles were tested in vitro for antimicrobial activity against four bacterial cultures – Escherichia coli , Enterobacter aerogenes , Klebsiella pneumoniae , and Staphylococcus aureus – and two fungal cultures – Candida albicans and Aspergillus niger . The synthesized 1,4‐disubstituted 1,2,3‐triazoles displayed moderate to good antimicrobial potential against the tested strains.     

2‐Azido‐2‐deoxycellulose: Synthesis and 1,3‐Dipolar Cycloaddition

Chitosan ( 1 ) was prepared by basic hydrolysis of chitin of an average molecular weight of 70000 Da, ¹H‐NMR spectra indicating almost complete deacetylation. N‐Phthaloylation of 1 yielded the known N‐phthaloylchitosan ( 2 ), which was tritylated to provide 3a and methoxytritylated to 3b . Dephthaloylation of 3a with NH₂NH₂?H₂O gave the 6‐O‐tritylated chitosan 4a . Similarly, 3b gave the 6‐O‐methoxytritylated 4b . CuSO₄‐Catalyzed diazo transfer to 4a yielded 95% of the azide 5a , and uncatalyzed diazo transfer to 4b gave 82% of azide 5b . Further treatment of 5a with CuSO₄ produced 2‐azido‐2‐deoxycellulose ( 7 ). Demethoxytritylation of 5b in HCOOH gave 2‐azido‐2‐deoxy‐3,6‐di‐O‐formylcellulose ( 6 ), which was deformylated to 7 . The 1,3‐dipolar cycloaddition of 7 to a range of phenyl‐, (phenyl)alkyl‐, and alkyl‐monosubstituted alkynes in DMSO in the presence of CuI gave the 1,2,3‐triazoles 8 – 15 in high yields.     

Stereoselective Synthesis of (Z)‐4‐(2‐Bromovinyl)benzene‐sulfonyl Azide and Its Synthetic Utility for the Transformation to (Z)‐N‐[4‐(2‐Bromovinyl)benzenesulfonyl]imidates

A novel method for the stereoselective synthesis of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide by simultaneous azidation and debrominative decarboxylation of anti‐2,3‐dibromo‐3‐(4‐chlorosulfonylphenyl)propanoic acid using NaN₃ only was developed. Facile transformation of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide to (Z)‐N‐[4‐ (2‐bromovinyl)benzenesulfonyl]imidates was also achieved by Cu‐catalyzed three‐component coulping of (Z)‐4‐(2‐bromovinyl)benzenesulfonyl azide, terminal alkynes and alcohols/phenols.     

Exploring the Border between Concerted and Two‐Step Pathways of 1,3‐Dipolar Cycloadditions of Organic Azides to Cyclic Ketene N,X‐Acetals. – Synthesis and 15N‐NMR Spectra of Zwitterions and Spirocyclic Cycloadducts

Cyclic ketene N,X‐acetals 1 are electron‐rich dipolarophiles that undergo 1,3‐dipolar cycloaddition reactions with organic azides 2 ranging from alkyl to strongly electron‐deficient azides, e.g., picryl azide ( 2L ; R¹=2,4,6‐(NO₂)₃C₆H₂) and sulfonyl azides 2M – O (R¹=XSO₂; cf. Scheme 1). Reactions of the latter with the most‐nucleophilic ketene N,N‐acetals 1A provided the first examples for two‐step HOMO(dipolarophile)–LUMO(1,3‐dipole)‐controlled 1,3‐dipolar cycloadditions via intermediate zwitterions 3 . To set the stage for an exploration of the frontier between concerted and two‐step 1,3‐dipolar cycloadditions of this type, we first describe the scope and limitations of concerted cycloadditions of 2 to 1 and delineate a number of zwitterions 3 . Alkyl azides 2A – C add exclusively to ketene N,N‐acetals that are derived from 1H‐tetrazole (see 1A ) and 1H‐imidazole (see 1B , C ), while almost all aryl azides yield cycloadducts 4 with the ketene N,X‐acetals (X=NR, O, S) employed, except for the case of extreme steric hindrance of the 1,3‐dipole (see 2E ; R¹=2,4,6‐(^tBu)₃C₆H₂). The most electron‐deficient paradigm, 2L , affords zwitterions 16D , E in the reactions with 1A , while ketene N,O‐ and N,S‐acetals furnish products of unstable intermediate cycloadducts. By tuning the electronic and steric demands of aryl azides to those of ketene N,N‐acetals 1A , we discovered new borderlines between concerted and two‐step 1,3‐dipolar cycloadditions that involve similar pairs of dipoles and dipolarophiles: 4‐Nitrophenyl azide ( 2G ) and the 2,2‐dimethylpropylidene dipolarophile 1A (R, R=H, ^tBu) gave a cycloadduct 13 H , while 2‐nitrophenyl azide ( 2 H ) and the same dipolarophile afforded a zwitterion 16A . Isopropylidene dipolarophile 1A (R=Me) reacted with both 2G and 2 H to afford cycloadducts 13G , J ) but furnished a zwitterion 16B with 2,4‐dinitrophenyl azide ( 2I) . Likewise, 1A (R=Me) reacted with the isomeric encumbered nitrophenyl azides 2J and 2K to yield a cycloadduct 13L and a zwitterion 16C , respectively. These examples suggest that, in principle, a host of such borderlines exist which can be crossed by means of small structural variations of the reactants. Eventually, we use ¹⁵N‐NMR spectroscopy for the first time to characterize spirocyclic cycloadducts 10 – 14 and 17 (Table 6), and zwitterions 16 (Table 7).     

Three‐arm star block copolymers of aromatic polyether and polystyrene from chain‐growth condensation polymerization,atom transfer radical polymerization,and click reaction

Well‐defined (AB)₃ type star block copolymer consisting of aromatic polyether arms as the A segment and polystyrene (PSt) arms as the B segment was prepared using atom transfer radical polymerization (ATRP), chain‐growth condensation polymerization (CGCP), and click reaction. ATRP of styrene was carried out in the presence of 2,4,6‐tris(bromomethyl)mesitylene as a trifunctional initiator, and then the terminal bromines of the polymer were transformed to azide groups with NaN₃. The azide groups were converted to 4‐fluorobenzophenone moieties as CGCP initiator units by click reaction. However, when CGCP was attempted, a small amount of unreacted initiator units remained. Therefore, the azide‐terminated PSt was then used for click reaction with alkyne‐terminated aromatic polyether, obtained by CGCP with an initiator bearing an acetylene unit. Excess alkyne‐terminated aromatic polyether was removed from the crude product by means of preparative high performance liquid chromatography (HPLC) to yield the (AB)₃ type star block copolymer (M_n = 9910, M_w/M_n = 1.10). This star block copolymer, which contains aromatic polyether segments with low solubility in the shell unit, exhibited lower solubility than A₂B or AB₂ type miktoarm star copolymers. In addition, the obtained star block copolymer self‐assembled to form spherical aggregates in solution and plate‐like structures in film. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Mono‐, bis‐ and tris‐piperidine fused imidazolinium salts: their in situ catalytic applications for C?C bond formation in aqueous solutions

The 1,5,6,7,8,8a‐hexahydroimidazo[1,5‐a]pyridine, 3, was quaternized with 2‐(bromomethyl‐1,3,5‐trimethylbenzene, 1,4‐bis(bromomethyl)‐2,3,5,6‐tetramethylbenzene, 2,4‐bis(bromomethyl)‐1,3,5‐trimethylbenzene, 1,3,5‐tris(bromomethyl)‐2,4,6‐trimethylbenzene and 1,3,5‐tris(bromomethyl)‐2,4,6‐triethylbenzene to obtain mono‐, bis‐ and tris‐imidazolinium salts (4–7) which were characterized by elemental analysis and NMR spectroscopy. In order to understand the effects of these changes on the N‐substituent and how they translate to catalytic activity, these new salts (4–7) with Pd(OAc)₂ were applied as in situ catalysts for Suzuki‐Miyaura and Heck‐Mirozoki cross‐coupling reactions of aryl chlorides and aryl bromides, respectively. The tris‐imidazolinium salts (7) were found to be more efficient than the related analogs 4–6. Copyright © 2009 John Wiley & Sons, Ltd.     

Novel Approach for Rapid and Efficient Synthesis of 2‐(3‐(4‐Aryl)‐1‐isonicotinoyl‐4,5‐dihydro‐1H‐pyrazol‐4‐yl)‐3‐phenylthiazolidin‐4‐one Derivatives and Screened Their Antimicrobial Activity

A series of compounds, viz. 2‐(3‐(4‐aryl)‐1‐isonicotinoyl‐4,5‐dihydro‐1H‐pyrazol‐4‐yl)‐3‐phenylthiazolidin‐4‐one 4 ( a – n ), have been synthesized by reaction of 3 ( a – n ) with thioglycolic acid in the presence of zinc chloride. Compounds 3 ( a – n ) have been synthesized by amination of formylated pyrazoles 2 ( A – B ), which were synthesized by formylation of 1 ( A – B ) by Vilsmeier–Haack reagent (POCl₃/DMF). Compounds 1 ( A – B ) were synthesized by condensation of hydrazide and substituted acetophenones under conventional method and microwave irradiation method. These compounds were identified on the basis of melting point range, Rf values, infrared, ¹H NMR, and mass spectral analysis. These compounds were evaluated for their in vitro antimicrobial activity, and their minimum inhibitory concentration was determined. Among them, compound 4b and compound 4l possess appreciable antimicrobial and antifungal activities. Antibacterial activity results showed that compounds containing electron‐withdrawing groups were more active than compounds containing electron‐releasing groups.     

Synthesis and chemical transformation of fused tetrazoles derived from 2‐bromomethyl‐ and 2‐iodomethyl‐3,5,6,7‐tetrahydro‐4(2H)‐benzofuranones

The 2‐bromomethyl‐3,5,6,7‐tetrahydrobenzofuranones 1a‐d were subjected to triazidochlorosilanesodium azide‐mediated Schmidt rearrangement to afford the corresponding tetrazolofuroazepine derivatives 2a‐d via methylene shift. Under similar reaction conditions, the 2‐iodomethyl‐3,5,6,7‐tetrahydrobenzofuranones 1e‐h afford mixtures of the corresponding tetrazolofuroazepines 2e‐h and the 4‐azido‐2‐iodomethyl‐2,3‐dihydrobenzofuran derivatives 3a‐c . A mechanism is proposed to account for the divergence in the reactivity of these 2‐halogenomethyltetrahydrobenzofuranones (X = Br versus I). In turn, the 2‐halogenomethyltetrazolofuroazepines 2a,b,d‐h and the 4‐azido‐2‐iodomethyl‐2,3‐dihydrobenzofurans 3a,b underwent nucleophilic substitution with triethyl phosphite and dehydrohalogenation using DBU in refluxing toluene to give the corresponding tetrazolofuroazepines 4a‐d and 5a‐c and benzofurans 6a,b .     

1,3‐Dipolar Cycloaddition Reactions of Organic Azides with Morpholinobuta‐1,3‐dienes and with an α‐Ethynyl‐enamine

The cycloaddition of organic azides with some conjugated enamines of the 2‐amino‐1,3‐diene, 1‐amino‐1,3‐diene, and 2‐aminobut‐1‐en‐3‐yne type is investigated. The 2‐morpholinobuta‐1,3‐diene 1 undergoes regioselective [3+2] cycloaddition with several electrophilic azides RN₃ 2 ( a , R=4‐nitrophenyl; b , R=ethoxycarbonyl; c , R=tosyl; d , R=phenyl) to form 5‐alkenyl‐4,5‐dihydro‐5‐morpholino‐1H‐1,2,3‐triazoles 3 which are transformed into 1,5‐disubstituted 1H‐triazoles 4a , d or α,β‐unsaturated carboximidamide 5 (Scheme 1). The cycloaddition reaction of 4‐[(1E,3Z)‐3‐morpholino‐4‐phenylbuta‐1,3‐dienyl]morpholine ( 7 ) with azide 2a occurs at the less‐substituted enamine function and yields the 4‐(1‐morpholino‐2‐phenylethenyl)‐1H‐1,2,3‐triazole 8 (Scheme 2). The 1,3‐dipolar cycloaddition reaction of azides 2a – d with 4‐(1‐methylene‐3‐phenylprop‐2‐ynyl)morpholine ( 9 ) is accelerated at high pressure (ca. 7–10 kbar) and gives 1,5‐disubstituted dihydro‐1H‐triazoles 10a , b and 1‐phenyl‐5‐(phenylethynyl)‐1H‐1,2,3‐triazole ( 11d ) in significantly improved yields (Schemes 3 and 4). The formation of 11d is also facilitated in the presence of an equimolar quantity of tBuOH. The three‐component reaction between enamine 9 , phenyl azide, and phenol affords the 5‐(2‐phenoxy‐2‐phenylethenyl)‐1H‐1,2,3‐triazole 14d .     

Azide/alkyne‐“click”‐reactions on amino resin materials: An LC‐ESI‐TOF analysis

This article describes the reaction of amino resins with functional molecules using the azide/alkyne‐“click”‐reaction, opening a simple chemical modification of amino resins under aqueous conditions. Alkyne‐modified melamine‐formaldehyde resins are prepared via a direct cocondensation approach using propargylic alcohol (21.6–86.3 mmol) as additive. Subsequently, alkyne‐modified mono‐, bi‐, and trinuclear melamine‐species are identified via LC‐ESI‐TOF methods proving the covalent incorporation of alkyne‐moieties in amounts of up to 3.9 mol %. Subsequent modification of the alkyne‐modified resins was accomplished by reaction of functional azides (octyl azide (1), (azidomethyl)benzene (2), 1‐(6‐azidohexyl) thymine (3), and 4‐azido‐N‐(2,2,6,6‐tetramethylpiperidin‐4‐yl)benzamide (4)) with Cu(I)Br and DIPEA as a base. The formation of triazolyl‐modified MF‐resins was proven by LC‐ESI‐TOF methods, indicating the successful covalent modification of the amino resin with the azides 1 – 4 . © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Cationic and mesoionic 1,3‐thiazolo‐[3,2‐c]quinazoline derivatives

4‐Allylthio‐2‐arylquinazolines 4a–c undergo cyclization by action of bromine to furnish 5‐aryl‐3‐bromomethyl‐2,3‐dihydrothiazolo[3,2‐c]quinazolin‐4‐ium bromides 5a–c . Compounds 5a–c undergo ring opening by action of water under acid catalysis to afford the corresponding dibromide derivatives 6a–c . Bromination of 3‐allyl‐2‐aryl‐4(3H)quinazolinethiones 7a–c leads to 5‐aryl‐2‐bromomethyl‐2,3‐dihydrothiazolo[3,2‐c]quinazolin‐4‐ium bromides 8a–c . However, anhydro‐3‐hydroxy‐5‐aryl‐1,3‐thiazolo[3,2‐c]quinazolin‐4‐ium hydroxide 10a–c were prepared by the cyclodehydration of the corresponding thioglycolic acids 9a–c with Ac₂O. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:576–580, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10148     

An Efficient Synthesis of New 5‐(1‐Aryl‐1H‐pyrazole‐4‐yl)‐1H‐tetrazoles from 1‐Aryl‐1H‐pyrazole‐4‐carbonitriles via [3 + 2] Cycloaddition Reaction

A series of new 5‐(1‐aryl‐1H‐pyrazole‐4‐yl)‐1H‐tetrazoles 4a‐l were synthesized via [3 + 2] cycloaddition reaction from 1‐aryl‐1H‐pyrazole‐4‐carbonitriles 3a‐l , sodium azide and ammonium chloride, using dimethylformamide (DMF) as solvent, in good yields: 64–85%. The structures of these newly synthesized compounds were determined from the IR, ¹H‐ and ¹³C‐NMR spectroscopic data and elemental analyses.     

Convenient Synthesis of Some Novel Pyridazinone‐Bearing Triazole Moieties

The chemoselective reactions of 2‐(5‐mercapto‐4‐phenyl‐4H‐[1,2,4]triazol‐3‐ylmethyl)‐6‐p‐tolyl‐4,5‐dihydro‐2H‐pyridazin‐3‐one ( 3 ) with different electrophiles were evaluated. Triazole 3 reacted with alkyl halides in the presence of triethylamine in alcohol to give the corresponding S‐substituted derivatives. On the basis of S‐chemoselective reactions of triazole 3 , a series of amino acid 10a – d and dipeptide derivatives 12a – d were prepared via azide coupling of the corresponding hydrazides 9 and 15 with amino acid ester hydrochlorides, respectively. N‐Substituted triazoles 6a – c or 7a – d attached to pyridazin‐3‐one moiety were successfully formed by the reaction of 3 with activated acrylic acid derivatives or with amines. Antibacterial activities of the synthesized derivatives were investigated through correlation with Escherichia coli FabH inhibitory activities using molecular modeling docking software. The antimicrobial activity of synthesized compounds was evaluated, showing best inhibition zone for N‐substituted carboxylic acid 5a and N‐substituted nitrile 5c parallel to the molecular modeling studies.     

An Efficient Synthesis of a (−)‐Physostigmine's Library for Identifying Potential Anti‐Alzheimer's Agents

An efficient route for the synthesis of (?)‐physostigmine analogs 1a – 1g and 2a – 2k is described. Analogs 1a – 1g were synthesized via copper(I)‐catalyzed cycloaddition between the optically pure azide 10 and a variety of alkynes. Similarly, analogs 2a – 2k were prepared through ‘three‐component Huisgen cycloaddition’ using various amines, propargyl bromine, and 10 in H₂O. Facile preparation of 10 via MacMillan's organocatalysis has made it possible to generate a great diversity of natural product‐like compounds that can be screened for anti‐Alzheimer's effects.     

‘Click Synthesis’ of 1H‐1,2,3‐Triazolyl‐Based Oxiconazole (=(1Z)‐1‐(2,4‐Dichlorophenyl)‐2‐(1H‐imidazol‐1‐yl)ethanone O‐[(2,4‐Dichlorophenyl)methyl]oxime) Analogs

The ‘click synthesis’ of some oxiconazole analogs 5a – 5v having 1H‐1,2,3‐triazolyl residues by Huisgen cycloaddition was achieved in four steps (Scheme 1). Oximation of phenacyl chloride ( 1 ) followed by azidation of 2‐chloro‐1‐phenylethanone oxime ( 2 ) provided azido ketoxime 3 . The CuI‐catalyzed Huisgen cycloaddition of 3 with terminal alkynes gave the 4‐substituted (at the triazole) 2‐(1H‐1,2,3‐triazol‐1‐yl)‐1‐phenylethanone oximes 4a – 4i . The O‐alkylation of 4a – 4i with various alkyl halides resulted in the formation of the target molecules 5a – 5v in good yields.     

Hydroxyl‐ and amine‐terminated hyperbranched polyurethanes using AB2‐type azide monomers: Synthesis,characterization, fluorescence,and charge‐transfer complexation studies

Novel AB₂‐type azide monomers such as 3,5‐bis(4‐methylolphenoxy)carbonyl azide (monomer 1) , 3,5‐bis(methylol)phenyl carbonyl azide (monomer 2) , 4‐(methylol phenoxy) isopthaloyl azide (monomer 3) , and 5‐(methylol) isopthaloyl azide (monomer 4) were synthesized. Melt and solution polymerization of these monomers yielded hydroxyl‐ and amine‐terminated hyperbranched polyurethanes with and without flexible ether groups. The structures of theses polymers were established using FT‐IR and NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 3.2 × 10³ to 5.5 × 10⁴ g/mol depending on the experimental conditions used. The thermal properties of the polymers were evaluated using TGA and DSC: the polymer obtained from monomer ( 1 ) exhibited lowest T_g and highest thermal stability and the polymer obtained from monomer ( 2 ) registered the highest T_g and lowest thermal stability. All the polymers displayed fluorescence maxima in the 425–525 nm range with relatively narrow peak widths indicating that they had pure and intense fluorescence. Also, the polymers formed charge transfer (CT) complexes with electron acceptor molecules such as 7,7,8,8‐tetracyano‐quino‐dimethane (TCNQ) and 1,1,2,2‐tetracyanoethane (TCNE) as evidenced by UV‐visible spectra. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3337–3351, 2009