Metabolomic study in plasma,liver and kidney of mice exposed to inorganic arsenic based on mass spectrometry

The mechanism of arsenic toxicity still remains unclear, although enzymatic inhibition, impaired antioxidants metabolism and oxidative stress may play a role. The toxicological effects of trivalent inorganic arsenic on laboratory mouse Mus musculus after oral administration (3 mg/kg body weight/day) were investigated along 12 days, using a metabolomic approach based on direct infusion mass spectrometry to polar and lipophilic extracts from different organs and fluids (liver, kidney, and plasma). Positive and negative acquisition modes (ESI⁺/ESI^?) were used throughout the experiments. The most significant endogenous metabolites affected by exposure were traced by partial least square-discriminant analysis and confirmed by tandem mass spectrometry (MS/MS) and gas chromatography coupled to MS. In this work, the toxic effect of arsenic has been related with important metabolic pathways, such as energy metabolism (e.g., glycolysis, Krebs cycle), amino acids metabolism, choline metabolism, methionine cycle, and degradation of membrane phospholipids (cell apoptosis). In addition, this work illustrates the high reliability of mass spectrometry based on a metabolomic approach to study the biochemical effects induced by metal exposure.

大气颗粒物中砷及其形态的研究进展

大气颗粒物中毒性准金属元素砷及其形态含量变化引起的环境健康问题受到了广泛关注。由于工业生产和煤燃烧等人类活动,砷普遍存在于多种环境介质中。排放到大气中的砷能够随气流进行长距离迁移,致使一些偏远区域大气中的砷含量明显超出欧盟的限制标准(6 ng/m3)。砷的毒性表达很大程度依赖其存在种态,无机砷毒性大于有机砷,且砷(Ⅲ)的毒性明显强于砷(Ⅴ)。本文概述了大气中砷的来源,并选取自2000年来的代表性成果比较了不同国家及不同功能区大气砷的含量变化,同时对1975年来多数关于大气颗粒物中砷形态变化特征的研究进行了评述。     

Arsenic Speciation in Urine and Blood Reference Materials

Acute and chronic exposure to arsenic is a growing problem in the industrialized world. Arsenic is a potent carcinogen and toxin in humans. In the body, arsenic is metabolized to produce several species, including inorganic forms, such as trivalent (As^III) and pentavalent (As^V), and the methylated metabolites such as monomethylarsonic acid, (MMA^V), and dimethylarsinic acid (DMA^V), in addition to arsenobetaine (AsB) which is ingested and excreted from the body in the same form. Each of these species has been reported to possess a specific but different degree of toxicity. Thus, not only is the measurement of total As required, but also quantification of the individual metabolites is necessary to evaluate the toxicity and risk assessment of this element. There are a large number of reference materials that are used to validate methodology for the analysis of As in blood and urine, but they are limited to total As concentrations. In this study, the speciation of five arsenic metabolites is reported in blood and urine from commercial available control materials certified for total arsenic levels. The separation was performed with an anion exchange column using inductively coupled plasma mass spectrometry as a detector. Baseline separation was achieved for As^III, As^V, MMA^V, DMA^V, and AsB, allowing us to quantify all five species. Excellent agreement between the total arsenic levels and the sum of the speciated As levels was obtained.     

Organoarsenic compounds in plants and soil on top of an ore vein

Plants and soil collected above an ore vein in Gasen (Austria) were investigated for total arsenic concentrations by inductively coupled plasma mass spectrometry (ICP‐MS). Total arsenic concentrations in all samples were higher than those usually found at non‐contaminated sites. The arsenic concentration in the soil ranged from ∼700 to ∼4000 mg kg⁻¹ dry mass. Arsenic concentrations in plant samples ranged from ∼0.5 to 6 mg kg⁻¹ dry mass and varied with plant species and plant part. Examination of plant and soil extracts by high‐performance liquid chromatography–ICP‐MS revealed that only small amounts of arsenic (<1%) could be extracted from the soil and the main part of the extractable arsenic from soil was inorganic arsenic, dominated by arsenate. Trimethylarsine oxide and arsenobetaine were also detected as minor compounds in soil. The extracts of the plants (Trifolium pratense, Dactylis glomerata, and Plantago lanceolata) contained arsenate, arsenite, methylarsonic acid, dimethylarsinic acid, trimethylarsine oxide, the tetramethylarsonium ion, arsenobetaine, and arsenocholine (2.5–12% extraction efficiency). The arsenic compounds and their concentrations differed with plant species. The extracts of D. glomerata and P. lanceolata contained mainly inorganic arsenic compounds typical of most other plants. T. pratense, on the other hand, contained mainly organic arsenicals and the major compound was methylarsonic acid. Copyright © 2002 John Wiley & Sons, Ltd.     

Separation and determination of arsenic species in water by selective exchange and hybrid resins

A simple and efficient method for separation and determination of inorganic arsenic (iAs) and organic arsenic (oAs) in drinking, natural and wastewater was developed. If arsenic is present in water prevailing forms are inorganic acids of As(III) and As(V). oAs can be found in traces as monomethylarsenic acid, MMA(V), and dimethylarsenic acid, DMAs(V). Three types of resins: a strong base anion exchange (SBAE) and two hybrid (HY) resins: HY-Fe and HY-AgCl, based on the activity of hydrated iron oxides and a silver chloride were investigated. It was found that the sorption processes (ion exchange, adsorption and chemisorptions) of arsenic species on SBAE (ion exchange) and HY resins depend on pH values of water. The quantitative separation of molecular and ionic forms of iAs and oAs was achieved by SBAE and pH adjustment, the molecular form of As(III) that exists in the water at pH <8.0 was not bonded with SBAE, which was convenient for direct determination of As(III) concentration in the effluent. HY-Fe resin retained all arsenic species except DMAs(V), which makes possible direct measurements of this specie in the effluent. HY-AgCl resin retained all iAs which was convenient for direct determination of oAs species concentration in the effluent. The selective bonding of arsenic species on three types of resins makes possible the development of the procedure for measuring and calculation of all arsenic species in water. In order to determine capacity of resins the preliminary investigations were performed in batch system and fixed bed flow system. Resin capacities were calculated according to breakthrough points in a fixed bed flow system which is the first step in designing of solid phase extraction (SPE) module for arsenic speciation separation and determination. Arsenic adsorption behavior in the presence of impurities showed tolerance with the respect to potential interference of anionic compounds commonly found in natural water. Proposed method was established performing standard procedures: with external standard, certified reference material and standard addition method. Two analytical techniques: the inductively coupled plasma mass spectrometry (ICP-MS) and atomic absorption spectroscopy-hydride generation (AAS-GH) were comparatively applied for the determination of arsenic in all arsenic species in water. ICP-MS detection limit was 0.2 μg L⁻¹ and relative standard deviation (RSD) of all arsenic species investigated was between 3.5 and 5.1%.     

Speciation of major arsenic species in seawater by flow injection hydride generation atomic absorption spectrometry

Arsenic present at 1 μg L^–1 concentrations in seawater can exist as the following species: As(III), As(V), monomethylarsenic, dimethylarsenic and unknown organic compounds. The potential of the continuous flow injection hydride generation technique coupled to atomic absorption spectrometry (AAS) was investigated for the speciation of these major arsenic species in seawater. Two different techniques were used. After hydride generation and collection in a graphite tube coated with iridium, arsenic was determined by AAS. By selecting different experimental hydride generation conditions, it was possible to determine As(III), total arsenic, hydride reactive arsenic and by difference non-hydride reactive arsenic. On the other hand, by cryogenically trapping hydride reactive species on a chromatographic phase, followed by their sequential release and AAS in a heated quartz cell, inorganic As, MMA and DMA could be determined. By combining these two techniques, an experimental protocol for the speciation of As(III), As(V), MMA, DMA and non-hydride reactive arsenic species in seawater was proposed. The method was applied to seawater sampled at a Mediterranean site and at an Atlantic coastal site. Evidence for the biotransformation of arsenic in seawater was clearly shown.     

Desorption electrospray ionization mass spectrometry (DESI-MS) applied to the speciation of arsenic compounds from fern leaves

The different chemical forms of arsenic compounds, including inorganic and organic species, present distinct environmental impacts and toxicities. Desorption electrospray ionization mass spectrometry (DESI-MS) is an excellent technique for in situ analysis, as it operates under atmospheric pressure and room temperature and is conducted with no/minimal sample pretreatment. Aimed at expanding its scope, DESI-MS is applied herein for the quick and reliable detection of inorganic (arsenate—As(V): AsO₄ ^3? and arsenite—As(III): AsO₂ ^?) and organic (dimethylarsinic acid—DMA: (CH₃)₂AsO(OH) and disodium methyl arsonate hexahydrate: CH₃AsO₃·2Na·6H₂O) arsenic compounds in fern leaves. Operational conditions of DESI-MS were optimized with DMA standard deposited on paper surfaces to improve ionization efficiency and detection limits. Mass spectra data for all arsenic species were acquired in both the positive and negative ion modes. The positive ion mode was shown to be useful in detecting both the organic and inorganic arsenic compounds. The negative ion mode was shown only to be useful in detecting As(V) species. Moreover, MS/MS spectra were recorded to confirm the identity of each arsenic compound by the characteristic fragmentation profiles. Optimized conditions of DESI-MS were applied to the analysis of fern leaves. LC-ICP-MS was employed to confirm the results obtained by DESI-MS and to quantify the arsenic species in fern leaves. The results confirmed the applicability of DESI-MS in detecting arsenic compounds in complex matrices.     

Generation of AsH(3) from As(V) in the absence of KI as prereducing agent: Speciation of inorganic arsenic

It is shown that the potassium iodide to the samples to reduce As(V) to AS(III) is not essential when total inorganic arsenic is determined by molecular spectrophotometry (trapping AsH(3) in Ag-DDTC) or by atomic-absorption spectrometry (if Ar flow-rate and NaBH(4) addition rate are controlled in 6M hydrochloric acid medium). Furthermore, in the presence of low concentration of organic arsenic, a method is reported for the selective determination of inorganic As(III) and As(V), based on the use of citrate/citric acid medium to determine As(III) and hydrochloric acid to determine total inorganic As. As(V) is determined by the difference between total inorganic As and As(III). The interference level of organic arsenic species (monomethylarsenic acid and dimethylarsenic acid) in the determination of total inorganic arsenic and AS(III) in 6M hydrochloric acid and citrate/citric acid medium respectively, is reported in the text. The developed method is applied to determine As(III) and As(V) in spiked, tap and waste waters and in lake sediments.     

Extraction and speciation of arsenic in plants grown on arsenic contaminated soils

A sequential arsenic extraction method was developed that yielded extraction efficiencies (EE) that were approximately double those using current methods for terrestrial plants. The method was applied to plants from two arsenic contaminated sites and showed potential for risk assessment studies. In the method, plants were extracted first by 1:1 water-methanol followed by 0.1 M hydrochloric (HCl) acid. Total arsenic in plant and soil samples collected from contaminated sites was mineralized by acid digestion and detected by inductively coupled plasma-atomic emission spectrometry (ICP-AES) and hydride generation-atomic absorption spectrometry (HG-AAS). Arsenic speciation was done by high performance liquid chromatography coupled with HG-AAS (HPLC-HGAAS) and by HPLC coupled with ICP-mass spectrometry (HPLC-ICP-MS). Spike recovery experiments with arsenite (As(III)), arsenate (As(V)), methylarsonic acid (MA) and dimethylarsinic acid (DMA) showed stability of the species in the extraction processes. Speciation analysis by X-ray absorption near edge spectroscopy (XANES) demonstrated that no transformation of As(III) and As(V) occurred due to sample handling. Dilute HCl was efficient in extracting arsenic from plants; however, extraction and determination of organic species were difficult in this medium. Sequential extraction with 1:1 water-methanol followed by 0.1 M-HCl was most useful in extracting and speciating both organic and inorganic arsenic from plants. Trace amounts of MA and DMA in plants could be detected by HPLC-HGAAS aided by the process of separation and preconcentration of the sequential extraction method. Both organic and inorganic arsenic compounds could be detected simultaneously in synthetic gastric fluid extracts (GFE) but EEs by this method were lower than those of the sequential method. The developed sequential method was shown to be reliable and applicable to various terrestrial plants for arsenic extraction and speciation.     

Speciation of arsenic in a contaminated soil by solvent extraction

Soil collected from a disused cattle dip in northern New South Wales was studied with the aim of developing an inexpensive, yet effective method for quantitative determination of arsenic(III), arsenic(V) and total organic arsenic in a contaminated soil. Hydrochloric acid extractions were used as a method for removal of the arsenic from the soil in a form suitable for speciation. It was found that the extraction efficiency varied with the ratio of soil to acid, and the concentration of the acid. Arsenic(III), as arsenic trichloride, was selectively extracted into chloroform from a solution highly concentrated in hydrochloric acid. This was followed by back-extraction of the arsenic into water. Total inorganic arsenic was determined in a similar manner after the reduction of arsenic(V) to the trivalent state with potassium iodide. Arsenic(V) was determined by the difference between the results for arsenic(III) and total inorganic arsenic. All analyses for the various arsenic species were performed by hydride generation-atomic absorption spectroscopy; concentrations of total arsenic in the soil were confirmed using X-ray fluorescence spectrometry. It was found that all the arsenic in the soil was present as inorganic arsenic in the pentavalent state. This reflects the ability of arsenic to interchange between species, since the original species in cattle dipping solution is arsenic(III).     

Semi-targeted analysis of metabolites using capillary-flow ion chromatography coupled to high-resolution mass spectrometry

This work describes a novel application of capillary-flow ion chromatography mass spectrometry for metabolomic analysis, and comparison of the technique to octadecyl silica and hydrophilic interaction chromatography (HILIC)-based mass spectrometry. While liquid chromatography/mass spectrometry (LC/MS) is rapidly becoming the standard technique for metabolomic analysis, metabolomic samples are extremely heterogeneous, leading to a requirement for multiple methods of analysis and separation techniques to perform a 'global' metabolomic analysis. While C18 is suitable for hydrophobic metabolites and has been used extensively in pharmaceutical drug metabolism studies, HILIC is, in general, efficient at separating polar metabolites. Phosphorylated species and organic acids are challenging to analyse and effectively quantitate on both systems. There is therefore a requirement for an MS-compatible analytical technique that can separate negatively charged compounds, such as ion-exchange chromatography. Evaluation of capillary flow ion chromatography with electrolytic suppression was performed on a library of metabolite standards and was shown to effectively separate organic acids and sugar di- and tri-phosphates. Limits of detection for these compounds range from 0.01 to 100 pmol on-column. Application of capillary ion chromatography to a comparative analysis of energy metabolism in procyclic forms of the parasitic protozoan Trypanosoma brucei where cells were grown on glucose or proline as a carbon source was demonstrated to be more effective than HILIC for detection of the organic acids that comprise glucose central metabolism and the tricarboxylic acid (TCA) cycle.     

Arsenic concentration and speciation in infant formulas and first foods

Arsenic exposure to humans is pervasive, and, increasingly, studies are revealing adverse health effects at ever lower doses. Drinking water is the main route of exposure for many individuals; however, food can be a significant source of arsenic to an individual, especially if their diet is rice-based. Infants are particularly susceptible to dietary exposure, since many first foods contain rice and they have a low body mass. Here we report on arsenic concentration and speciation in infant formulas and first foods. Speciation is essential for food analysis because of the much greater toxicity of inorganic arsenic species and the possibility that arsenic in food (unlike water) may be present in either inorganic or organic forms. Infant milk formulas were low in total arsenic (2.2-12.6 ng g(-1), n=15). Non-dairy formulas were significantly higher in arsenic than dairy-based formulas. Arsenic in formula was almost exclusively inorganic and predominantly arsenic(V). Arsenic concentration in purees (n=41) and stage 3 foods (n=18) ranged from 0.3-22 ng g(-1). Rice-fortified foods had significantly higher total arsenic concentrations than non rice-based foods. Again arsenic speciation was predominantly inorganic; arsenic(III) was the main species with lower concentrations of DMA and arsenic(V) also present. These data confirm that infants are exposed to arsenic via diet, and suggest that careful attention to diet choices may limit this.     

Differential preconcentration of arsenic(III) and arsenic(V) with thionalide loaded on silica gel

2-Mercapto-N-2-naphtylacetamide (thionalide) on silica gel is used for differential preconcentration of μg l^?1 levels of arsenic(III) and arsenic(V) from aqueous solution. In batch experiments, arsenic(III) was quantitatively retained on the gel from solutions of pH 6.5–8.5, but arsenic(V) and organic arsenic compounds were not retained. The chelating capacity of the gel was 5.6 μmol g^?1 As(III) at pH 7.0. Arsenic retained on teh column was completely eluted with 25 ml of 0.01 M sodium borate in 0.01 M sodium hydroxide containing 10 mg l^?1 iodine (pH 10). The arsenic was determined by silver diethyldithiocarbamate spectrophotometry. Arsenic(V) was subsequently determined after reduction to arsenic(III) with sulphite and iodide. Arsenic(III) and arsenic(V) in sea water are shown to be < 0.12 and 1.6 μg l^?1, respectively.     

Formation of methylated oxyarsenicals and thioarsenicals in wild-type and arsenic (+3 oxidation state) methyltransferase knockout mice exposed to arsenate

Arsenic (+3 oxidation state) methyltransferase (As3mt) plays a central role in the enzymatically catalyzed conversion of inorganic arsenic into methylated metabolites. Most studies of the metabolism and disposition of arsenicals following exposure to inorganic arsenic focus on the formation and fate of methylated oxyarsenicals. However, recent research has shown methylated thioarsenicals to be another important class of metabolites of inorganic arsenic. Here, we report on the presence of methylated oxy- and thioarsenicals in urine and liver from wild-type mice that efficiently methylate inorganic arsenic and from As3mt knockout mice that lack arsenic methyltransferase activity. Following a single oral dose of 0.5 mg of arsenic as arsenate/kg body weight, urine from wild-type mice contained methylated oxyarsenicals and unknown arsenicals. Further analysis identified one unknown arsenical in urine of wild-type mice as dimethylmonothioarsinic acid. In addition, another unknown arsenical in urine of wild-type mice that occurred in the urine of about 20 % of arsenate-treated mice. The presence of low levels of methylated arsenicals in liver digests of As3mt knockout mice may reflect the activity of other methyltransferases or the absorption of methylated arsenicals formed by the microbiota of the gastrointestinal tract. The lack of methylated thioarsenicals in urine of As3mt knockout mice suggests a close link between the processes that form methylated oxy- and thioarsenicals.     

Speciation of major arsenic species in seawater by flow injection hydride generation atomic absorption spectrometry

Arsenic present at 1 microg L(-1) concentrations in seawater can exist as the following species: As(III), As(V), monomethylarsenic, dimethylarsenic and unknown organic compounds. The potential of the continuous flow injection hydride generation technique coupled to atomic absorption spectrometry (AAS) was investigated for the speciation of these major arsenic species in seawater. Two different techniques were used. After hydride generation and collection in a graphite tube coated with iridium, arsenic was determined by AAS. By selecting different experimental hydride generation conditions, it was possible to determine As(III), total arsenic, hydride reactive arsenic and by difference non-hydride reactive arsenic. On the other hand, by cryogenically trapping hydride reactive species on a chromatographic phase, followed by their sequential release and AAS in a heated quartz cell, inorganic As, MMA and DMA could be determined. By combining these two techniques, an experimental protocol for the speciation of As(III), As(V), MMA, DMA and nonhydride reactive arsenic species in seawater was proposed. The method was applied to seawater sampled at a Mediterranean site and at an Atlantic coastal site. Evidence for the biotransformation of arsenic in seawater was clearly shown.     

Optimization of microwave‐assisted extraction for six inorganic and organic arsenic species in chicken tissues using response surface methodology

Response surface methodology was applied to optimize the parameters for microwave‐assisted extraction of six major inorganic and organic arsenic species (As(III), As(V), dimethyl arsenic acid, monomethyl arsenic acid, p‐arsanilic acid, and roxarsone) from chicken tissues, followed by detection using a high‐performance liquid chromatography with inductively coupled mass spectrometry detection method, which allows the simultaneous analysis of both inorganic and organic arsenic species in the extract in a single run. Effects of extraction medium, solution pH, liquid‐to‐solid ratio, and the temperature and time of microwave‐assisted extraction on the extraction of the targeted arsenic species were studied. The optimum microwave‐assisted extraction conditions were: 100 mg of chicken tissue, extracted by 5 mL of 22% v/v methanol, 90 mmol/L (NH₄)₂HPO₄, and 0.07% v/v trifluoroacetic acid (with pH adjusted to 10.0 by ammonium hydroxide solution), ramping for 10 min to 71°C, and holding for 11 min. The method has good extraction performance for total arsenic in the spiked and nonspiked chicken tissues (104.0 ± 13.8% and 91.6 ± 7.8%, respectively), except for the ones with arsenic contents close to the quantitation limits. Limits of quantitation (S/N = 10) for As(III), As(V), dimethyl arsenic acid, monomethyl arsenic acid, p‐arsanilic acid, and roxarsone in chicken tissues using this method were 0.012, 0.058, 0.039, 0.061, 0.102, and 0.240 mg/kg (dry weight), respectively.     

Simple and selective determination of arsenite and arsenate by electrospray ionization mass spectrometry

Arsenic pollution of public water supplies has been reported in various regions of the world. Recently, some cancer patients are treated with arsenite (As^III); most Japanese people consume seafoods containing large amounts of negligibly toxic arsenic compounds. Some of these arsenic species are metabolized, but some remain intact. For the determination of toxic As^III, a simple, rapid and sensitive method has been developed using electrospray ionization mass spectrometry (ESI-MS). As^III was reacted with a chelating agent, pyrrolidinedithiocarbamate (PDC, C₄H₈NCSS^-) and tripyrrolidinedithiocarbamate-arsine, As(PDC)₃, extracted with methyl isobutyl ketone (MIBK). A 1 μL aliquot of MIBK layer was directly injected into ESI-MS instrument without chromatographic separation, and was detected within 1 min. Arsenate (As^V) was reduced to As^III with thiosulfate, and then the total inorganic As was quantified as As^III. This method was validated for the analysis of urine samples. The limit of detection of As was 0.22 μg L⁻¹ using 10 μL of sample solution, and it is far below the permissible limit of As in drinking water, 10 μg L⁻¹, recommended by the WHO. Results were obtained in < 10 min with a linear calibration range of 1-100 μg L⁻¹. Several organic arsenic compounds in urine did not interfere with As^III detection, and the inorganic As in the reference materials SRM 2670a and 1643e were quantified after the reduction of As^V to As^III.     

Speciation of Arsenic in Rice by Ion Chromatography with Online Anion Suppression and Inductively Coupled Plasma Mass Spectrometry

Arsenic speciation in rice has received attention due to its impact on food safety and human health. In this study, a sensitive method was developed for the determination of inorganic arsenic in rice using online anion suppression with ion chromatography and inductively coupled plasma mass spectrometry. HCl of 0.01?mol/L was the optimal extracting agent, and 38?mmol/L sodium carbonate and 15?mmol/L sodium acetate were used as the mobile phase to separate dimethylarsinic acid (DMA), arsenite, monomethylarsonic acid (MMA), and arsenate. The results showed that there were no significant losses or transformations with the anion suppressor and an improvement in sensitivity. The limits of quantification were 0.1?µg/L for DMA, As(III) and MMA, and 0.2?µg/L for As(V). The procedure was used to determine inorganic arsenic in rice; As(III) and DMA were the primary forms present. The reproducibility from seven measurements showed that the relative standard deviation was less than 1.68%. The recoveries were from 99.76 to 110.42%. The present work offers a new approach for the determination of inorganic arsenic in rice.     

Arsenic Compounds Accumulated in Sedimentary Microorganisms Cultivated in Media Containing Several Arsenicals

Sediments, as sources of microorganisms, were added to two kinds of media, 1/5 ZoBell 2216E and a solution of inorganic salts, which contained inorganic arsenic(III), inorganic arsenic(V), methanearsonic acid, dimethyl- arsinic acid, trimethylarsine oxide, tetramethylarsonium salt or arsenocholine. After 17 days of incubation at 20 °C, the arsenicals that had accumulated in the microorganisms were analysed by high-performance liquid chromatography (HPLC). While the more toxic arsenicals [inorganic arsenic(III), inorganic arsenic(V), methanearsonic acid, dimethylarsinic acid] were not converted in the microorganisms, trimethylarsine oxide and tetramethylarsonium salt were considerably degraded to inorganic arsenic(V), and arsenocholine to arsenobetaine. Arsenobetaine that had accumulated in the microorganisms was extracted and confirmed by thin-layer chromatography (TLC) and fast atom bombardment (FAB) mass spectrometry.     

Arsenic speciation in edible alga samples by microwave-assisted extraction and high performance liquid chromatography coupled to atomic fluorescence spectrometry

Twelve commercially available edible marine algae from France, Japan and Spain and the certified reference material (CRM) NIES No. 9 Sargassum fulvellum were analyzed for total arsenic and arsenic species. Total arsenic concentrations were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) after microwave digestion and ranged from 23 to 126 μg g⁻¹. Arsenic species in alga samples were extracted with deionized water by microwave-assisted extraction and showed extraction efficiencies from 49 to 98%, in terms of total arsenic. The presence of eleven arsenic species was studied by high performance liquid chromatography–ultraviolet photo-oxidation–hydride generation atomic–fluorescence spectrometry (HPLC–(UV)–HG–AFS) developed methods, using both anion and cation exchange chromatography. Glycerol and phosphate sugars were found in all alga samples analyzed, at concentrations between 0.11 and 22 μg g⁻¹, whereas sulfonate and sulfate sugars were only detected in three of them (0.6-7.2 μg g⁻¹). Regarding arsenic toxic species, low concentration levels of dimethylarsinic acid (DMA) (<0.9 μg g⁻¹) and generally high arsenate (As(V)) concentrations (up to 77 μg g⁻¹) were found in most of the algae studied. The results obtained are of interest to highlight the need to perform speciation analysis and to introduce appropriate legislation to limit toxic arsenic species content in these food products.