Electrochemical Determination of the Herbicide Bentazone Using a Carbon Nanotube β‐Cyclodextrin Modified Electrode

An electrochemical sensor has been developed for the determination of the herbicide bentazone, based on a GC electrode modified by a combination of multiwalled carbon nanotubes (MWCNT) with β‐cyclodextrin (β‐CD) incorporated in a polyaniline film. The results indicate that the β‐CD/MWCNT modified GC electrode exhibits efficient electrocatalytic oxidation of bentazone with high sensitivity and stability. A cyclic voltammetric method to determine bentazone in phosphate buffer solution at pH 6.0, was developed, without any previous extraction, clean‐up, or derivatization steps, in the range of 10–80 µmol L^?1, with a detection limit of 1.6 µmol L^?1 in water. The results were compared with those obtained by an established HPLC technique. No statistically significant differences being found between both methods.     

β‐Cyclodextrin Incorporated Carbon Nanotube Paste Electrode as Electrochemical Sensor for Nifedipine

In this work a carbon paste electrode modified with multiwalled carbon nanotubes/β‐cyclodextrin (MWCNTs/β‐CD) was constructed and applied to the determination of nifedipine. The electrochemical behavior of nifedipine at this electrode was investigated using cyclic voltammetry and differential pulse voltammetry. Characterization of the modified electrode was conducted with electrochemical impedance spectroscopy and scanning electron microscopy. After adsorption of nifedipine on the MWCNTs/β‐CD paste electrode at 0.0 V for 6 min, a well defined reduction peak was produced in sodium hydroxide of 0.05 M. The calibration curve was linear from 7.0×10^?8 to 1.5×10^?5 M. The detection limit was obtained as 2.5×10^?8 M. The results demonstrated that this electrochemical sensor has excellent sensitivity and selectivity. This sensor was applied for determination of nifedipine in drug dosage and blood serum with excellent recoveries.     

Optimization of an Electrochemical Sensor for Determination of Imidacloprid Based on β‐cyclodextrin Electropolymerization on Glassy Carbon Electrode

An electrochemical sensor based on electropolymerization of β‐cyclodextrin (β‐CD) on a glassy carbon electrode (GCE) was developed for the determination of imidacloprid (IMP). That insecticide is the most commonly used insecticides globally and has been related to the death of bee colonies around the world are imperative. So the development of a simple, cheap and sensitive method for IMP determination is essential. This work aims the modification of a GCE by β‐CD film. The analytical response obtained with GCCE/β‐CD in the presence of the IMP showed an increase in the peak current variation of 947 % in relation to the bare GCE, indicating that the analyte was encapsulated in the β‐CD increasing the detection sensitivity. The followed experimental conditions were optimized: potential range (−1.3 to 0.9 V), presence or absence of dissolved oxygen (presence) and stirring during the electropolymerization (with agitation), number of cycles (5 scans), electrolyte pH (pH=5.0), scan rate (100 mV s⁻¹) and concentration of β‐CD (6 mol L⁻¹). The optimization promoted a peak current variation increase of 57 %, developing a more sensitivity methodology.     

Electrochemical Quantitative Analysis of Nucleic Acids Using β‐Cyclodextrin Modified Gold Electrode

We present an electrochemical biosensor for the analysis of nucleic acids upon hybridization on the β‐cyclodextrin (β‐CD)‐modified gold electrode. The strategy is based on the following: The 5’‐ferrocene‐labeled single stranded capture probe DNA (5’‐fc‐ss‐DNA) was incorporated into the cavity of thiolated β‐CD which was immobilized on the surface of gold electrode. After hybridization of complementary target DNA, hybridized double stranded DNA (ds‐DNA) was released from the cavity of β‐CD. The difference of electrochemical properties on the modified gold electrode was characterized by cyclic voltametry and surface plasmon resonance. We successfully applied this method to the investigation of the sensor responses due to hybridization on various concentrations of applied target DNA. As a result, the label‐free electrochemical DNA sensor can detect the target DNA with a detection limit of 1.08 nM. Finally, our method does not require either hybridization indicators or other signalling molecules such as DNA intercalaters which most of electrochemical hybridization detection systems require.     

Electrochemical Sensor for Sensitive Determination of Ga(III) Ion Based on β‐Cyclodextrin Incorporated Multi‐walled Carbon Nanotubes and Imprinted Sol‐gel Composite Film

A novel sensor for detection of trace gallium ion [Ga(III)] was created by stepwise modification of a gold electrode with β‐cyclodextrin (β‐CD)/multi‐walled carbon nanotubes (MWCNTs) and an ion imprinted polymer (IIP). The sensor surface morphology was characterized by scanning electron microscopy. The electrochemical performance of the imprinted sensor was investigated by cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The sensor displayed excellent selectivity towards the target Ga(III) ion. Meanwhile, the introduced MWCNTs displayed noticeable catalytic activity, and β‐CD demonstrated significant enrichment capacity. A linear calibration curve was obtained covering the concentration range from 5.0×10^?8 to 1.0×10^?4 mol·L^?1, with a detection limit of 7.6×10^?9 mol·L^?1. The proposed sensor was successfully applied to detect Ga(III) in real urine samples.     

Electrochemical Derivatization of Acetaminophen for Indirect Determination of Eflornithine Using β‐CD Modified Glassy Carbon Electrode

In the present work, the oxidation of acetaminophen in the absence and presence of eflornithine was electrochemically investigated by means of cyclic voltammetry at a glassy carbon electrode (GCE). Our results indicate that N‐acetyl‐p‐benzoquinone imine (NAPQI) produced from two‐electron electrochemical oxidation of acetaminophen participates in a Michael addition reaction with eflornithine via an ECE mechanism. This fact was used for the determination of eflornithine using differential pulse voltammetry (DPV) technique on the surface of β‐Cyclodextrin modified glassy carbon (β‐CD/GC) electrode. β‐CD/GC electrode was prepared through an electrodeposition procedure and characterized by Fourier‐transform infrared spectroscopy (FT‐IR), Cyclic Voltammetry (CV), Field Emission Scanning Electron Microscopy (FESEM) and Energy‐dispersive X‐ray spectroscopy (EDS) techniques. Under optimum conditions, the β‐CD/GC electrode showed a good linearity as a function of the eflornithine concentration over the range from 5 to 100 μM with detection limit and quantification limit of 1.94 and 5.8 μM, respectively. Finally, the proposed protocol was confirmed to be successful in determination of eflornithine in human urine samples with good recovery, ranging from 97.2 % to 104.8 %.     

Electrochemical Studies of Inclusion Complex Formed Between Glutathione and β‐cyclodextrin‐modified Carbon Electrodes and its Application for Determination of Glutathione

In this work, the electrochemical determination of glutathione (GSH) using β‐cyclodextrin (β‐CD) modified carbon electrodes was carried out. Different methodologies were used to modify the electrodes. In the first part of this paper, we analyze and compare the ability of the electrodes to determine GSH using the different β‐CD‐modified electrodes and cyclic voltammetry. We found that the carbon paste electrode modified by potential sweeping was the best electrode for GSH determination; in addition, we found that an inclusion complex formed between β‐CD deposited on the electrode surface and GSH. The formation constant for this complex was 2498.54 M^?1 at 25 °C. Furthermore, we have also calculated thermodynamic parameters for the formation of the inclusion complex. In the second part of this paper, we analyze the effect of sweep rate and pH on the determination of GSH. The best results were obtained at a rate of 50 mV s^?1 and a pH of 2.2. The β‐CD‐modified carbon paste electrode exhibits a linear response in a concentration range of 20 to 157 µM with a sensitivity of 1083.65 µA mM^?1cm^?2 and a detection limit of 3.92 µM. Finally, the electrode was used to determine the GSH concentration in Eichhornia crassipes root extract, and the concentration determination accuracy was validated by a well‐known spectroscopic method.     

An Electrochemical Sensor Based on Electropolymerization of ß‐Cyclodextrin and Reduced Graphene Oxide on a Glassy Carbon Electrode for Determination of Neonicotinoids

An electrochemical sensor of glassy carbon electrode modified with reduced graphene oxide and β‐cyclodextrin (GCE/rGO/β‐CD) was developed as an effective alternative in the determination of neonicotinoid insecticides, imidacloprid, clothianidin and thiamethoxam, in honey samples. The peak current variation obtained with the proposed sensor was higher compared to the bare GCE in all the analytes. In the determination of imidacloprid the response increased by 1300 %, clothianidin by 670 % and thiametoxam by 630 %. In addition, the optimization of the experimental conditions provided the construction of a sensor with greater sensitivity. The study of interferers showed that inorganic ions (Ca²⁺, Mg²⁺, Fe²⁺, K⁺, Na⁺, e NH₄⁺) and other insecticides (acetamiprid and dinotefuran) did not influence the reduction of imidacloprid, clothianidin and thiamethoxam. The determination of imidacloprid, clothianidin and thiamethoxam in honey samples exhibited recovery values within the EPA range (between 107.75 and 116 %). In conclusion, the developed sensor GCE/rGO/β‐CD proved to be an effective alternative in the determination of neonicotinoid insecticides in honey samples.     

Selective Electrochemical Determination of Uric Acid in the Presence of Ascorbic Acid Using a Carbon Paste Electrode Modified with β‐Cyclodextrin

Uric acid (UA) was determined in the presence of ascorbic acid (AA) by using a carbon paste electrode modified superficially by a β‐cyclodextrin film (CPE/β‐CD). The surface carbon paste electrode was prepared applying a 30 cycles potential program and using a 1 M HClO₄+0.01 M β‐CD electrolytic solution. The UA and AA solutions were used to evaluate the electrode selectivity and sensitivity by cyclic voltammetric and amperometric methods. In these experiments the detection limit for UA was (4.6±0.01)×10^?6 M and the RSD calculated from the amperometric curves was 10%. From the data obtained it was possible to quantify UA in the urine and saliva samples. Selective detection of UA was improved by formation of an inclusion complex between β‐CD and UA. The results show that the CPE/β‐CD is a good candidate due to its selectivity and sensitivity in the UA determination in complex samples like the biological fluids.     

Electrocatalytic and Analytical Response of β‐Cyclodextrin Incorporated Carbon Nanotubes‐Modified Electrodes Toward Guanine

The utility of β‐cyclodextrin incorporated carbon nanotubes‐modified electrodes (β‐CD/CNT/E) for electrocatalytic oxidation of guanine in aqueous solution is demonstrated. Compared to the conventional electrode, it lowers the overpotential and enhances the peak current significantly. The action mechanism of β‐CD/CNT/E was discussed systemically. The results demonstrated that the use of β‐CD/CNT/E clearly provides an effective methodology for the determination of guanine. Based on the signal of guanine, an estimate of DNA concentration can be recognized with a limit of detection of 10 ng mL^?1.     

Carbon Nanomaterials‐based Electrochemical Immunoassay with β‐Galactosidase as Labels for Carcinoembryonic Antigen

In this study, a novel signal‐amplified strategy for sensitive electrochemical sandwiched immunoassay of carcinoembryonic antigen (CEA) was constructed based on aminofunctionalized graphene oxide (GO‐NH₂) supported AgNPs used as catalytic labels of secondary anti‐CEA and β‐galactosidase (β‐Gal), Meanwhile, sulfhydrylation single‐wall carbon nanotubes (SWCNTs‐SH) as substrate materials embellished gold electrode through Au‐SH and connected with gold nanoparticles to form anti‐CEA/AuNPs/SWCNTs‐SH/Au sensing platform through layer‐by‐layer. In the presence of analyte CEA, a sandwich‐type immunoassay format was employed for determination of CEA by using the labeled β‐Gal toward the reduction of p‐aminophenyl galactopyranoside (PAPG) and the redox reaction of AgNPs. Under optimal conditions, the increase in the current was proportional to the concentration of CEA from 0.1 pg/mL to 200 ng/mL. The detection limit (LOD) was 0.036 pg/mL CEA at 3σ. The electrochemical immunoassay displayed an acceptable precision, selectivity, stability. Clinical serum specimens were assayed with the method, and the results were in acceptable agreement with those obtained from the referenced electrochemiluminescent method.     

Voltammetric Determination of Metronidazole Using a Sensor Based on Electropolymerization of α‐Cyclodextrin over a Carbon Paste Electrode

An electrochemical sensor for metronidazole (MTZ) was built via the surface modification of a carbon paste electrode (CPE) by a film obtained through electropolymerization of α‐cyclodextrin (CPE_α‐CD). The CPE_α‐CD was characterized by cyclic voltammetry (CV) and atomic force microscopy (AFM), by both techniques was demonstrated that the polymer film is coating the electrode surface. The electroreduction behaviour of MTZ in HClO₄ media as a supporting electrolyte was studied by differential‐pulse voltammetric (DPV) technique. The DPV electrochemical process was observed to be diffusion controlled and irreversible. Under optimal conditions, the peak current was proportional to MTZ concentration in the range of 0.5 to 103.0 μM with a detection limit of 0.28±0.02 μM. The method was successfully applied to quantify of MTZ in pharmaceutical formulations. In addition, this proposed MTZ sensor exhibited good reproducibility, long‐term stability and fast current response.     

Modification of Glassy Carbon Electrode With Single‐Walled Carbon Nanotubes and α‐Silicomolybdate: Application to Sb(III) Detection

A simple procedure was developed to prepare a glassy carbon (GC) electrode modified with single‐walled carbon nanotubes (SWCNTs) and polyoxometalate. With immersing SWCNTs modified GC electrode in silicon polyoxomolybdate (α‐SiMo₁₂O₄₀^4?) solution (direct deposition) for a short period of time (2–10 s) oxoanion adsorbed strongly and irreversibly on SWCNTs. Cyclic voltammograms of the α‐SiMo₁₂O₄₀^4? incorporated‐SWCNTs indicates three well‐defined and reversible redox couples with surface confined characteristic at wide pH range (1–7). The surface coverage (Γ) of α‐SiMo₁₂O₄₀^4? immobilized on SWCNTs was 2.14 (±0.11)×10^?9 mol cm^?2 indicating high loading ability of SWCNTs for polyoxometalate. The charge transfer rate constant (k_s) of three redox couples of adsorbed α‐SiMo₁₂O₄₀^4? were 9.20 (±0.20), 8.02 (±0.20), and 3.70 (±0.10) s^?1, respectively, indicate great facilitation of the electron transfer between α‐SiMo₁₂O₄₀^4? and CNTs. In this research the attractive mechanical and electrical characteristics of CNTs and unique properties and reactivity of polyoxometalates were combined. The modified electrode in buffer solution containing Sb(III) shows a new redox system at 0.38 V in pH 1. The voltammetric peak current increased with increasing Sb(III) concentration. The differential pulse voltammetry (DPV) technique was used for detection micromolar concentration of antimony. Furthermore, the interference effects various electroactive compounds on voltammetric response of Sb(III) were negligible. Finally the ability of the modified electrode for antimony detection in real samples was evaluated.     

Interaction of β‐Cyclodextrin with Cetyltrimethylammonium Bromide in the Presence of Neutral Red and Its Application to the Spectrophotometric Determination of β‐Cyclodextrin

The effects of addition of β‐cyclodextrin (β‐CD) to the neutral red‐cetyltrimethylammonium bromide (CTAB) associates in pH 7 phosphate buffer solutions were investigated. Addition of β‐CD to neutral red‐CTAB association causes decomposition of the associate by displacement of neutral red with β‐CD. The inclusion complex of CTAB with β‐CD is more stable than that with neutral red. The results indicate that formation of inclusion complex of CTAB with β‐CD prevents its association with neutral red, and inclusion complex formation of β‐CD and neutral red in the presence of CTAB takes place after total consumption of CTAB. The competition of β‐CD and neutral red on the interaction with CTAB can be used for the simple, rapid and sensitive spectrophotometric determination of β‐CD.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.     

Synthesis of β‐Haloketones by β‐Addition Reactions of α,β‐Unsaturated Ketones with BX3 (X = Br,Cl) as Halide Source

A series of β‐bromoketones and β‐chloroketones were synthesized by the addition reactions of α,β‐unsaturated ketones under BX₃ (X = Br, Cl) and ethylene glycol reaction system. The α,β‐unsaturated ester also was successfully converted to its corresponding β‐bromoester under the reaction condition.     

Electrochemical Synthesis of β‐Cyclodextrin Functionalized Silver Nanoparticles and Reduced Graphene Oxide Composite for the Determination of Hydrazine

β‐cyclodextrin (β‐CD) functionalized silver nanoparticles (AgNPs) and reduced graphene oxide (RGO) via one step electrochemical potentiodyanamic method has been prepared. Scanning electron microscopy, Energy‐Dispersive X‐ray spectroscopy, electrochemical impedance spectroscopy and cyclic voltammetry were used to study the role of β‐CD on preparation of AgNPs and RGO. RGO/β‐CD/AgNPs modified GCE showed good electrochemical activity towards electro‐oxidation of hydrazine in terms of decreasing the over potential and increasing the peak current. The kinetic parameters such as electron transfer coefficient (α) and diffusion coefficient (Do) of the modified electrode towards hydrazine were determined to be 0.66 and 0.97×10^?6 cm² s^?1, respectively. The LOD of our sensor was many folds lower than that of recommended concentration of hydrazine in drinking water by United States Environmental Protection Agency and World Health Organization. The sensor exhibited a wide linear range from 0.08 to 1110 µM and a very low detection limit (LOD) of 1.4 nM. In addition, the sensor selectively determined hydrazine even in the presence of common interferents.     

One‐Step Synthesis of β‐Cyclodextrin Functionalized Graphene/Ag Nanocomposite and Its Application in Sensitive Determination of 4‐Nitrophenol

β‐Cyclodextrin functionalized graphene/Ag nanocomposite (β‐CD/GN/Ag) was prepared via a one‐step microwave treatment of a mixture of graphene oxide and AgNO₃. β‐CD/GN/Ag was employed as an enhanced element for the sensitive determination of 4‐nitrophenol. A wide linear response to 4‐nitrophenol in the concentration ranges of 1.0×10^?8–1.0×10^?7 mol/L, and 1.0×10^?7–1.5×10^?3 mol/L was achieved, with a low detection limit of 8.9×10^?10 mol/L (S/N=3). The mechanism and the heterogeneous electron transfer kinetics of the 4‐nitrophenol reduction were discussed according to the rotating disk electrode experiments. Furthermore, the sensing platform has been applied to the determination of 4‐nitrophenol in real samples.     

An Electrochemical Sensing Strategy for Amantadine Detection Based on Competitive Host‐guest Interaction of Methylene Blue/β‐cyclodextrin/Poly(N‐acetylaniline) Modified Electrode

A novel electrochemical strategy for the detection of amantadine (AMD) has been developed based on the competitive host‐guest interaction of AMD and methylene blue (MB) with β‐cyclodextrin (β‐CD). Due to the host‐guest interaction, MB molecules can enter into the hydrophobic inner cavity of β‐CD, and the MB/β‐CD/poly(N‐acetylaniline)/glassy carbon electrode displays a remarkable reduction peak due to MB. In the presence of AMD, competitive association to β‐CD occurs and the MB molecules are displaced by AMD, resulting in a decrease of reduction peak current of MB. The difference value of the cathodic peak current showed a linear relationship with the AMD concentration.