Amphiphilic Janus Gold Nanoparticles Prepared by Interface‐Directed Self‐Assembly: Synthesis and Self‐Assembly

Materials with Janus structures are attractive for wide applications in materials science. Although extensive efforts in the synthesis of Janus particles have been reported, the synthesis of sub‐10 nm Janus nanoparticles is still challenging. Herein, the synthesis of Janus gold nanoparticles (AuNPs) based on interface‐directed self‐assembly is reported. Polystyrene (PS) colloidal particles with AuNPs on the surface were prepared by interface‐directed self‐assembly, and the colloidal particles were used as templates for the synthesis of Janus AuNPs. To prepare colloidal particles, thiol‐terminated polystyrene (PS‐SH) was dissolved in toluene and citrate‐stabilized AuNPs were dispersed in aqueous solution. Upon mixing the two solutions, PS‐SH chains were grafted to the surface of AuNPs and amphiphilic AuNPs were formed at the liquid–liquid interface. PS colloidal particles decorated with AuNPs on the surfaces were prepared by adding the emulsion to excess methanol. On the surface, AuNPs were partially embedded in the colloidal particles. The outer regions of the AuNPs were exposed to the solution and were functionalized through the grafting of atom‐transfer radical polymerization (ATRP) initiator. Poly[2‐(dimethamino)ethyl methacrylate] (PDMAEMA) on AuNPs were prepared by surface‐initiated ATRP. After centrifugation and dissolving the colloidal particles in tetrahydrofuran (THF), Janus AuNPs with PS and PDMAEMA on two hemispheres were obtained. In acidic pH, Janus AuNPs are amphiphilic and are able to emulsify oil droplets in water; in basic pH, the Janus AuNPs are hydrophobic. In mixtures of THF/methanol at a volume ratio of 1:5, the Janus AuNPs self‐assemble into bilayer structures with collapsed PS in the interiors and solvated PDMAEMA at the exteriors of the structures.     

Self‐Assembly of a Chiral Lipid Gelator Controlled by Solvent and Speed of Gelation

Glutamine derivative 1 with two‐photon absorbing units has been synthesized and was found to show gelation ability in some solvents. Its self‐assembly in the gel phase could be controlled by the solvent and speed of gelation. For example, in DMSO the organogelator self‐assembled into H‐aggregates with weak exciton coupling between the aromatic moieties. On the other hand, in DMSO/diphenyl ether (1:9, v/v) the molecules formed 1D aggregates, but with strong exciton coupling due to the small distance between the chromophores. Moreover, the formation of these two kinds of aggregates could be adjusted by the ratio of DMSO to diphenyl ether. In DMSO/toluene, DMSO/butanol, DMSO/butyl acetate, and DMSO/acetic acid systems similar results were observed. Therefore, conversion of the packing model occurs irrespective of the nature of the solvent. Notably, a unique sign inversion in the CD spectra could be realized by controlling the speed of gelation in the DMSO/diphenyl ether (1:9, v/v) system. It was found that a low speed of gelation induces the gelator to adopt a packing model with strong π–π interactions between the aromatic units. Moreover, the gels, when excited at 800 nm, emit strong green fluorescence and the quantum chemical calculations suggest that intramolecular charge transfer leads to two‐photon absorption of the gelator molecule.     

Dynamic Formation of Hybrid Peptidic Capsules by Chiral Self‐Sorting and Self‐Assembly

Owing to their versatility and biocompatibility, peptide‐based self‐assembled structures constitute valuable targets for complex functional designs. It is now shown that artificial capsules based on β‐barrel binding motifs can be obtained by means of dynamic covalent chemistry (DCC) and self‐assembly. Short peptides (up to tetrapeptides) are reversibly attached to resorcinarene scaffolds. Peptidic capsules are thus selectively formed in either a heterochiral or a homochiral way by simultaneous and spontaneous processes, involving chiral sorting, tautomerization, diastereoselective induction of inherent chirality, and chiral self‐assembly. Self‐assembly is shown to direct the regioselectivity of reversible chemical reactions. It is also responsible for shifting the tautomeric equilibrium for one of the homochiral capsules. Two different tautomers (keto‐enamine hemisphere and enol‐imine hemisphere) are observed in this capsule, allowing the structure to adapt for self‐assembly.     

Self‐Assembly of Aniline Oligomers

A great number of nano/microscaled morphologies have recently been prepared during the oxidation of aniline. At the early stage of oxidation, aniline oligomers are obtained, often in spectacular morphologies depending on reaction conditions. Herein, the flower‐like hierarchical architectures assembled from aniline oligomers by a template‐free method are reported. Their formation process is ascribed to the self‐assembly of oligoanilines through non‐covalent interactions, such as hydrogen bonding, hydrophobic forces, and π–π stacking. The model of directional growth is offered to explain the formation of petal‐like objects and, subsequently, flowers. In order to investigate the chemical structure of the oligomers, a series of characterizations have been carried out, such as matrix‐assisted laser desorption ionization, time‐of‐flight mass spectrometry, gas chromatography coupled with mass spectrometry analysis, X‐ray diffraction, and UV/Vis, Fourier‐transform infrared, and Raman spectroscopies. Based on the results of characterization methods, a formation mechanism for aniline oligomers and their self‐assembly is proposed.     

Synthesis,Photophysics, and Self‐Assembly of Furan‐Embedded Heteroarenes

A series of pyrene/phenanthrene‐fused furan derivatives ( 1 – 8 ) were synthesized by a simple condensation reaction between pyrene‐4,5‐diketone/phenanthrenequinone and substituted phenol/naphthol in the presence of trifluoromethanesulfonic acid in 1,2‐dichlorobenzene heated at reflux. The formed compounds can emit strong blue light in organic solvents. Additionally, the self‐assembly behaviors of two of the compounds ( 3 and 5 ) were studied through re‐precipitation method and the resulting nanostructures were characterized by UV/Vis, fluorescence spectra, and field‐emission scanning electron microscopy (FESEM). The findings showed that the shape and size of compounds 3 and 5 could be tuned by the ratio of THF and hexadecyl trimethyl ammonium bromide (CTAB) solution in water.     

Self‐Assembly Studies of a Chiral Bisurea‐Based Superhydrogelator

A chiral bisurea‐based superhydrogelator that is capable of forming supramolecular hydrogels at concentrations as low as 0.2 mM is reported. This soft material has been characterized by thermal studies, rheology, X‐ray diffraction analysis, transmission electron microscopy (TEM), and by various spectroscopic techniques (electronic and vibrational circular dichroism and by FTIR and Raman spectroscopy). The expression of chirality on the molecular and supramolecular levels has been studied and a clear amplification of its chirality into the achiral analogue has been observed. Furthermore, thermal analysis showed that the hydrogelation of compound 1 has a high response to temperature, which corresponds to an enthalpy‐driven self‐assembly process. These particular thermal characteristics make these materials easy to handle for soft‐application technologies.     

Magnetically Encoded Luminescent Composite Nanoparticles through Layer‐by‐Layer Self‐Assembly

Sensitive and rapid detection of multiple analytes and the collection of components from complex samples are important in fields ranging from bioassays/chemical assays, clinical diagnosis, to environmental monitoring. A convenient strategy for creating magnetically encoded luminescent CdTe@SiO₂@n Fe₃O₄ composite nanoparticles, by using a layer‐by‐layer self‐assembly approach based on electrostatic interactions, is described. Silica‐coated CdTe quantum dots (CdTe@SiO₂) serve as core templates for the deposition of alternating layers of Fe₃O₄ magnetic nanoparticles and poly(dimethyldiallyl ammonium chloride), to construct CdTe@SiO₂@n Fe₃O₄ (n=1, 2, 3, …?) composite nanoparticles with a defined number (n) of Fe₃O₄ layers. Composite nanoparticles were characterized by zeta‐potential analysis, fluorescence spectroscopy, vibrating sample magnetometry, and transmission electron microscopy, which showed that the CdTe@SiO₂@n Fe₃O₄ composite nanoparticles exhibited excellent luminescence properties coupled with well‐defined magnetic responses. To demonstrate the utility of these magnetically encoded nanoparticles for near‐simultaneous detection and separation of multiple components from complex samples, three different fluorescently labeled IgG proteins, as model targets, were identified and collected from a mixture by using the CdTe@SiO₂@n Fe₃O₄ nanoparticles.     

Cluster‐Based Self‐Assembly Route toward MoO3 Single‐Walled Nanotubes

MoO₃ has a unique rigid double‐layer structure, which makes it a real challenge to prepare nanotubular structures. The controlled synthesis of MoO₃ single‐walled nanotubes (SWNTs) is achieved through a cluster‐based self‐assembly route on the dodecanethiol/water interface. Various factors are studied at length, including precursor type, reaction time, temperature, pH value, and their influence on the morphology of products. The concept of “self‐assembly—from simple clusters to nanostructures” is proposed here based on preliminary results from the synthesis of MoO₃ SWNTs, which provides a new aspect for traditional synthetic chemistry of nanomaterials and polyoxometalates.     

Synthesis and Hierarchical Self‐Assembly of Diphenylalanine‐Based Homopolymer and Copolymers By RAFT Polymerization

Dipeptide diphenylalanine has attracted significant research interests because of its ability to self‐assemble into various nanostructures such as nanotubes, nanowires, and nanoribbons. In this article, we present the synthesis and self‐assembly of a novel diphenylalanine‐based homopolymer and block/random copolymers by the reversible addition–fragmentation chain transfer (RAFT) polymerization of an acrylamide having a dipeptide moiety. The RAFT polymerization of N‐acryloyl‐l ,l ‐diphenylalanine (A‐Phe‐Phe‐OH) afforded novel amino acid‐based polymers with predetermined molecular weights and relatively narrow‐molecular weight distributions. The hierarchical self‐assembled structures of poly(A‐Phe‐Phe‐OH), which involve nanorods, larger nanofiber‐like microcrystals, and fiber bundles, were characterized by atomic force microscopy (AFM), transmission electron microscopy, scanning electron microscopy, and dynamic light scattering measurements. The circular dichroic measurements of poly(A‐Phe‐Phe‐OH) revealed its characteristic chiroptical property, which is affected by the nature of the solvents and the addition of urea and salts via hydrophobic, hydrogen bonding, and electrostatic interactions. Thermo‐ and pH‐responsive block and random copolymers composed of A‐Phe‐Phe‐OH and N‐isopropylacrylamide were synthesized by RAFT polymerization, and the thermoresponsive properties and assembled structures of the resulting copolymers were investigated by AFM and turbidity measurements. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2562–2574     

Synthesis,Self‐Assembly,and Multi‐Stimuli Responses of a Supramolecular Block Copolymer

A supramolecular block copolymer is prepared by the molecular recognition of nucleobases between poly(2‐(2‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol) methacrylate)‐SS‐poly(ε‐caprolactone)‐adenine (P(MEO₂MA‐co‐OEGMA)‐SS‐PCL‐A) and uracil‐terminated poly(ethylene glycol) (PEG‐U). Because the block copolymer is linked by the combination of covalent (disulfide bond) and noncovalent (A U) bonds, it not only has similar properties to conventional covalently linked block copolymers but also possesses a dynamic and tunable nature. The copolymer can self‐assemble into micelles with a PCL core and P(MEO₂MA‐co‐OEGMA)/PEG shell. The size and morphologies of the micelles/aggregates can be adjusted by altering the temperature, pH, salt concentration, or adding dithiothreitol (DTT) to the solution. The controlled release of Nile red is achieved at different environmental conditions.

     

Monitoring and Targeting the Initial Dimerization Stage of Amyloid Self‐Assembly

Amyloid deposits are pathological hallmark of a large group of human degenerative disorders of unrelated etiologies. While accumulating evidence suggests that early oligomers may account for tissue degeneration, most detection tools do not allow the monitoring of early association events. Here we exploit bimolecular fluorescence complementation analysis to detect and quantify the dimerization of three major amyloidogenic polypeptides; islet amyloid polypeptide, β‐amyloid and α‐synuclein. The constructed systems provided direct visualization of protein‐protein interactions in which only assembled dimers display strong fluorescent signal. Potential inhibitors that interfere with the initial intermolecular interactions of islet amyloid polypeptide were further identified using this system. Moreover, the identified compounds were able to inhibit the aggregation and cytotoxicity of islet amyloid polypeptide, demonstrating the importance of targeting amyloid dimer formation for future drug development.     

Synthesis and Supramolecular Self‐Assembly of Coil‐Rod‐Coil Molecules: The Relationship between Self‐Assembled Nanostructures and Molecular Structures

Herein, the relationship between the supramolecularly self‐assembled nanostructures and the chemical structures of coil‐rod‐coil molecules is discussed. A series of nonamphiphilic coil‐rod‐coil molecules with different alkyl chains, central mesogenic groups, and chemical linkers were designed and synthesized. The solvent‐mediated supramolecular self‐assembling of these coil‐rod‐coil molecules resulted in rolled‐up nanotubes, nanofibers, submicron sized belts, needle‐like microcrystals, and amorphous structures. The self‐assembling behaviors of these coil‐rod‐coil molecules have been systematically investigated to reveal the relationship between the supramolecularly self‐assembled nanostructures and their chemical structures. With respect to the formation of rolled‐up nanotubes by self‐assembly of coil‐rod‐coil molecules, we have systematically investigated the following three influencing structural factors: 1) the alkyl chain length; 2) the central mesogenic group; (3) the linker type. These studies disclosed the key structural features of coil‐rod‐coil molecules for the formation of rolled‐up nanotubes.     

Supramolecular Dendrimers: Convenient Synthesis by Programmed Self‐Assembly and Tunable Thermoresponsivity

We report here the noncovalent synthesis of thermosensitive dendrimers. Short oligoguanosine strands were linked to the focal point of a dendron by using “click chemistry”, and quadruplex formation was used to drive the self‐assembly process in the presence of metal ions. The dynamic nature of these noncovalent assemblies can be exploited to create combinatorial libraries of dendrimers as demonstrated by the co‐assembly of two components. These supramolecular dendrimers showed thermoresponsive behavior that can be tuned by varying the templating cations or the number of guanines in the oligonucleotide strand.     

Synthesis and Characterisation of Self‐Assembled and Self‐Adjuvanting Asymmetric Multi‐Epitope Lipopeptides of Ovalbumin

Designing a lipopeptide (LP) vaccine with a specific asymmetric arrangement of epitopes may result in an improved display of antigens, increasing host‐cell recognition and immunogenicity. This study aimed to synthesise and characterise the physicochemical properties of a library of asymmetric LP‐based vaccine candidates that contained multiple CD4⁺ and CD8⁺ T‐cell epitopes from the model protein antigen, ovalbumin. These fully synthetic vaccine candidates were prepared by microwave‐assisted solid phase peptide synthesis. The C12 or C16 lipoamino acids were coupled to the N or C terminus of the OVA CD4 peptide epitope. The OVA CD4 LPs and OVA CD8 peptide constructs were then conjugated using azide–alkyne Huisgen cycloaddition to give multivalent synthetic vaccines. Physiochemical characterisation of these vaccines showed a tendency to self‐assemble in aqueous media. Changes in lipid length and position induced self‐assembly with significant changes to their morphology and secondary structure as shown by transmission electron microscopy and circular dichroism.