Highly selective multilayer polymer thin films for CO2/N2 separation

Multilayer thin films of poly(ethylene oxide) (PEO) and poly(methacrylic acid) (PMAA), deposited via layer‐by‐layer (LbL) assembly from aqueous solutions, are investigated for CO₂/N₂ separation. Eight and ten bilayer (217 and 389 nm thick, respectively) PEO/PMAA thin films deposited on a 25 μm polystyrene substrate exhibit CO₂/N₂ selectivities of 142 and 136, respectively. These are the highest reported to‐date for this gas pair separation using a homogeneous polymer film. While further work remains to improve CO₂ permeability, these results indicate the potential of LbL assemblies as standalone CO₂ separation membranes for low‐flux/high‐purity applications, or as part of a composite and/or mixed‐matrix membrane for high‐flux applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1730–1737     

Hydrophosphination of CO2 and Subsequent Formate Transfer in the 1,3,2‐Diazaphospholene‐Catalyzed N‐Formylation of Amines

Hydrophosphination of CO₂ with 1,3,2‐Diazaphospholene (NHP‐H; 1 ) afforded phosphorus formate (NHP‐OCOH; 2 ) through the formation of a bond between the electrophilic phosphorus atom in 1 and the oxygen atom from CO₂, along with hydride transfer to the carbon atom of CO₂. Transfer of the formate from 2 to Ph₂SiH₂ produced Ph₂Si(OCHO)₂ ( 3 ) in a reaction that could be carried out in a catalytic manner by using 5 mol % of 1 . These elementary reactions were applied to the metal‐free catalytic N‐formylation of amine derivatives with CO₂ in one pot under ambient conditions.     

Catalytic Reduction of CN−, CO,and CO2 by Nitrogenase Cofactors in Lanthanide‐Driven Reactions

Nitrogenase cofactors can be extracted into an organic solvent to catalyze the reduction of cyanide (CN⁻), carbon monoxide (CO), and carbon dioxide (CO₂) without using adenosine triphosphate (ATP), when samarium(II) iodide (SmI₂) and 2,6‐lutidinium triflate (Lut‐H) are employed as a reductant and a proton source, respectively. Driven by SmI₂, the cofactors catalytically reduce CN⁻ or CO to C₁–C₄ hydrocarbons, and CO₂ to CO and C₁–C₃ hydrocarbons. The C C coupling from CO₂ indicates a unique Fischer–Tropsch‐like reaction with an atypical carbonaceous substrate, whereas the catalytic turnover of CN⁻, CO, and CO₂ by isolated cofactors suggests the possibility to develop nitrogenase‐based electrocatalysts for the production of hydrocarbons from these carbon‐containing compounds.     

Single‐ and double‐electron reductions of CO2 by using superalkalis: An ab initio study

CO₂, a major contributor to global warming, can be balanced by converting it into fuels. The reduction of CO₂ has been difficult due to its extremely high stability. Recently, single‐electron reduction of CO₂ by superalkalis has been proposed using quantum chemical methods. Herein, we report a systematic study on the single‐reduction of CO₂ by using typical superalkalis. Superalkalis are hypervalent species possessing lower ionization energies than alkali atoms. We have studied the interaction of CO₂ with FLi₂, OLi₃, and NLi₄ superalkalis using ab initio MP2 calculations. We notice that this interaction leads to stable superalkali‐CO₂ complexes in which the structure of CO₂ is bent due to electron transfer from superalkalis. This clearly reveals that the CO₂ can successfully be reduced to the anion. It has been also noticed that the size of superalkalis plays a crucial in the single‐electron reduction of CO₂. For instance, the binding energy of superalkali‐CO₂ complex and charge transfer to CO₂ decreases monotonically with the increase in the size of superalkali. We have also proposed that CO₂ can be further reduced to in case of the anionic complex such as (FLi₂ CO₂)‾. Thus, FLi₂ superalkali is also capable of double‐electron reduction of CO₂. These findings should provide new insights into CO₂‐activation as well as motivate further research in this direction.     

The Role of Multiwall Carbon Nanotubes in Cu‐BTC Metal‐Organic Frameworks for CO2 Adsorption

The discovery of natural gas fields with a high content of CO₂ in world gas reservoirs poses new challenges for CO₂ capture. This work investigates the use of the metal‐organic framework (MOF) Cu‐BTC and hybrid MWCNTs@Cu‐BTC for CO₂ adsorption. Cu‐BTC and hybrid MWCNTs@Cu‐BTC were synthesized by the solvothermal method. The results of imaging of intact MOF pores in Cu‐BTC and hybrid MWCNTs@Cu‐BTC nanocrystals by high‐resolution transmission electron microscopy (HRTEM) under liquid nitrogen conditions are presented. Physical characterizations of the solid adsorbents were made by using a selection of different techniques, including field‐emission scanning electron microscopy (FESEM), X‐ray powder diffraction (XRD), Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetric analysis (TGA), Brunauer–Emmet–Teller (BET) surface area, and CO₂ adsorption and physisorption measurements. HRTEM and FESEM confirmed that Cu‐BTC has an octahedral shape and that the surface morphology of Cu‐BTC changes by the intercalation of MWCTNs. The results show that the modified Cu‐BTC improved the CO₂ adsorption compared to pure Cu‐BTC. The increase in the CO₂ uptake capabilities of hybrid MWCNTs@Cu‐BTC was ascribed to the intercalation of MWCNTs with Cu‐BTC crystals. The CO₂ sorption capacities of Cu‐BTC and hybrid MWCNTs@Cu‐BTC were found to increase from 1.91701 to 3.25642 mmol/g at ambient conditions.     

Evidence of Amine–CO2 Interactions in Two Pillared‐Layer MOFs Probed by X‐ray Crystallography

Two pillared‐layer metal–organic frameworks (MOFs; PMOF‐55 and NH₂‐PMOF‐55) based on 1,2,4‐triazole and terephthalic acid (bdc)/NH₂‐bdc ligands were assembled and display framework stabilities, to a certain degree, in both acid/alkaline solutions and toward water. They exhibit high CO₂ uptakes and selective CO₂/N₂ adsorption capacities, with CO₂/N₂ selectivity in the range of 24–27, as calculated by the ideal adsorbed solution theory method. More remarkably, the site and interactions between the host network and the CO₂ molecules were investigated by single‐crystal X‐ray diffraction, which showed that the main interaction between the CO₂ molecules and PMOF‐55 is due to multipoint supramolecular interactions of C?H???O, C???O, and O???O. Amino functional groups were shown to enhance the CO₂ adsorption and identified as strong adsorption sites for CO₂ by X‐ray crystallography.     

Polymer nanoparticles with a sensitive CO2‐responsive hydrophilic/hydrophobic surface

Poly(methyl methacrylate) (PMMA) nanoparticles with a sensitive CO₂‐responsive hydrophilic/hydrophobic surface that confers controlled dispersion and aggregation in water were prepared by emulsion polymerization at 50 °C under CO₂ bubbling using amphiphilic diblock copolymers of 2‐dimethylaminoethyl methacrylate (DMAEMA) and N‐isopropyl acrylamide (NIPAAm) as an emulsifier. The amphiphilicity of the hydrophobic–hydrophilic diblock copolymer at 50 °C was triggered by CO₂ bubbling in water and enabled the copolymer to serve as an emulsifier. The resulting PMMA nanoparticles were spherical, approximately 100 nm in diameter and exhibited sensitive CO₂/N₂‐responsive dispersion/aggregation in water. Using copolymers with a longer PNIPAAm block length as an emulsifier resulted in smaller particles. A higher concentration of copolymer emulsifier led to particles with a stickier surface. Given its simple preparation and reversible CO₂‐triggered amphiphilic behavior, this newly developed block copolymer emulsifier offers a highly efficient route toward the fabrication of sensitive CO₂‐stimuli responsive polymeric nanoparticle dispersions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2149–2156     

Synthesis of 6‐Aminoindolo[2,1‐a]isoquinoline‐5‐carbonitriles by the Cu‐Catalyzed Reaction of 2‐(2‐Bromophenyl)‐1H‐indoles with CH2(CN)2

A series of 6‐aminoindolo[2,1‐a]isoquinoline‐5‐carbonitriles 4 have been prepared by treatment of 2‐(2‐bromophenyl)‐1H‐indoles 1 , available from 1‐(2‐bromophenyl)ethanones or 1‐(2‐bromophenyl)propan‐1‐ones by using Fischer indole synthesis, with propanedinitrile in the presence of a catalytic amount of CuBr and an excess of K₂CO₃ in DMSO at 100°.     

CO2‐Breathing Induced Reversible Activation of Mechanophore within Microgels

In this work, CO₂‐breathing induced reversible activation of mechanophore within microgels is reported. The microgels are prepared through soap‐free emulsion polymerization of CO₂‐switchable monomer 2‐(diethylamino)ethyl‐methacrylate, using spiropyran (SP) based mechanophore MA‐SP‐MA as cross‐linker. The microgels can be swollen by CO₂ aeration. The swelling of microgels activates the SP mechanophore into merocyanine, causing distinguished color and fluorescence change. Moreover, these transitions are highly reversible, and the initial states of microgels can be easily recovered by “washing off” CO₂ with N₂. The present contribution represents the first example of CO₂‐breathing activation of mechanophore within microgels.

     

High CO2‐Capture Ability of a Porous Organic Polymer Bifunctionalized with Carboxy and Triazole Groups

A new porous organic polymer, SNU‐C1 , incorporating two different CO₂‐attracting groups, namely, carboxy and triazole groups, has been synthesized. By activating SNU‐C1 with two different methods, vacuum drying and supercritical‐CO₂ treatment, the guest‐free phases, SNU‐C1‐va and SNU‐C1‐sca , respectively, were obtained. Brunauer–Emmett–Teller (BET) surface areas of SNU‐C1‐va and SNU‐C1‐sca are 595 and 830 m²g^?1, respectively, as estimated by the N₂‐adsorption isotherms at 77 K. At 298 K and 1 atm, SNU‐C1‐va and SNU‐C1‐sca show high CO₂ uptakes, 2.31 mmol g^?1 and 3.14 mmol g^?1, respectively, the high level being due to the presence of abundant polar groups (carboxy and triazole) exposed on the pore surfaces. Five separation parameters for flue gas and landfill gas in vacuum‐swing adsorption were calculated from single‐component gas‐sorption isotherms by using the ideal adsorbed solution theory (IAST). The data reveal excellent CO₂‐separation abilities of SNU‐C1‐va and SNU‐C1‐sca , namely high CO₂‐uptake capacity, high selectivity, and high regenerability. The gas‐cycling experiments for the materials and the water‐treated samples, experiments that involved treating the samples with a CO₂‐N₂ gas mixture (15:85, v/v) followed by a pure N₂ purge, further verified the high regenerability and water stability. The results suggest that these materials have great potential applications in CO₂ separation.     

Synthesis of Porous,Nitrogen‐Doped Adsorption/Diffusion Carbonaceous Membranes for Efficient CO2 Separation

A porous, nitrogen‐doped carbonaceous free‐standing membrane (TFMT‐550) is prepared by a facile template‐free method using letrozole as an intermediate to a triazole‐functionalized‐triazine framework, followed by carbonization. Such adsorption/diffusion membranes exhibit good separation performance of CO₂ over N₂ and surpassing the most recent Robeson upper bound. An exceptional ideal CO₂/N₂ permselectivity of 47.5 was achieved with a good CO₂ permeability of 2.40 × 10⁻¹³ mol m m⁻² s⁻¹ Pa⁻¹. The latter results arise from the presence of micropores, narrow distribution of small mesopores and from the strong dipole–quadrupole interactions between the large quadrupole moment of CO₂ molecules and the polar sites associated with N groups (e.g., triazine units) within the framework.     

UV‐triggered CO2‐responsive behavior of nanofibers and their controlled drug release properties

A novel nanofibrous mat featuring an ultraviolet (UV)‐induced CO₂‐responsive behavior was fabricated via electrospinning and used as a controlled drug release system. First, a random copolymer for electrospinning, poly(N,N‐diethylaminoethyl acrylamide‐co‐N‐benzylacrylamide‐co‐N,N‐dimethyl‐N‐(2‐nitrobenzyl)‐ethaneamine acrylamide‐co‐4‐acryloyloxy benzophenone) [P(DEEA‐co‐BA‐co‐DMNOBA‐co‐ABP)], was prepared based on pentafluorophenyl esters via an “active ester‐amine” chemistry reaction. Subsequently, doxorubicin hydrochloride (DOX)‐loaded P(DEEA‐co‐BA‐co‐DMNOBA‐co‐ABP) nanofibers were fabricated, yielding a new drug‐loaded nanofibrous mat as a potential wound dressing. These DOX‐loaded nanofibers can respond to UV irradiation and CO₂ stimulation. Interestingly, without UV irradiation, the fabricated nanofibers cannot exhibit any responsiveness. Therefore, the majority of the DOX was steadily stored in the nanofibers, even in the presence of CO₂. However, upon UV irradiation, the CO₂‐responsive behavior of the nanofibers was activated and the prepared nanofibers swelled slightly, resulting in the release of around 42% DOX from the nanofibers. Upon further purging with CO₂, the release amount of DOX from the nanofibers could reach up to approximately 85%, followed by the morphological transition from a nanofibrous mat to a porous hydrogel film. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1580–1586     

Synthesis of nitrogen doped activated carbon/polyaniline material for CO2 adsorption

The equilibrium adsorption isotherms of carbon dioxide and nitrogen on the nitrogen doped activated carbon (NAC) prepared by the chemical activation of a pine cone‐based char/polyaniline composite were measured using a volumetric technique. CO₂ and N₂ adsorption experiments were done at three different temperatures (298, 308, and 318 K) and pressures up to 16 bar, and correlated with the Langmuir, Freundlich, and Sips models. The Sips isotherm model presented the best fit to the experimental data. The N‐doped adsorbent showed CO₂ and N₂ adsorption capacity of 3.96 mmol·g⁻¹ and 0.86 mmol·g⁻¹, respectively, at 298 K and 1 bar. The selectivity predicted by ideal adsorbed solution theory (IAST) model was achieved 47.17 for NAC at 1 bar and y_N2 = 0.85 which is a composition similar to flue gas. The results showed that NAC adsorbent has a high CO₂‐over‐N₂ selectivity in a binary mixture. The relatively fast sorption rate of CO₂ on NAC compared to N₂ indicates the stronger affinity between CO₂ and amine groups. The isosteric heat of adsorption of CO₂ by the NAC demonstrated the physico‐chemical adsorption of CO₂ on the adsorbent surface. These data showed that prepared NAC could be successfully applied in separation of CO₂ from N₂.     

Direct Fabrication of Porous Isotactic Poly‐1‐Butene With Form I From the Melt Using CO2

The deformation of isotactic poly‐1‐butene (iPB‐1) matrix, during the CO₂‐assisted foaming process, makes the iPB‐1 melt crystallize into form I rather than form I′, which crystallizes after annealing under high‐pressure CO₂ without foaming. The result provides a new strategy to directly obtain porous iPB‐1 with stable form I from iPB‐1 melt.     

Pb2(OH)2[p‐O2C‐C6H4‐CO2]: Synthese und Kristallstruktur

Pb₂(OH)₂[p‐O₂C‐C₆H₄‐CO₂]: Synthesis and Crystal Structure Single crystals of Pb₂(OH)₂[p‐O₂C‐C₆H₄‐CO₂] ( 1 ) were obtained by hydrothermal reaction of terephthalic acid and PbCO₃ at 180 °C (10 days). 1 crystallizes in the monoclinic space group P2₁/c with Z = 2 (a = 1115.6(2) pm, b = 380.10(4) pm, c = 1141.3(2) pm, β = 93.39(1)°, V = 0.4831(1) nm³). The crystal structure is characterized by ladder‐type Pb(OH)_3/3 double chains, which are connected to a three‐dimensional framework by terephthalate dianions.     

Confinement of Ionic Liquids in Nanocages: Tailoring the Molecular Sieving Properties of ZIF‐8 for Membrane‐Based CO2 Capture

Fine‐tuning of effective pore size of microporous materials is necessary to achieve precise molecular sieving properties. Herein, we demonstrate that room temperature ionic liquids can be used as cavity occupants for modification of the microenvironment of MOF nanocages. Targeting CO₂ capture applications, we tailored the effective cage size of ZIF‐8 to be between CO₂ and N₂ by confining an imidazolium‐based ionic liquid [bmim][Tf₂N] into ZIF‐8’s SOD cages by in‐situ ionothermal synthesis. Mixed matrix membranes derived from ionic liquid‐modified ZIF‐8 exhibited remarkable combinations of permeability and selectivity that transcend the upper bound of polymer membranes for CO₂/N₂ and CO₂/CH₄ separation. We observed an unusual response of the membranes to varying pressure, that is, an increase in the CO₂/CH₄ separation factor with pressure, which is highly desirable for practical applications in natural gas upgrading.     

Convenient Synthesis of Terminal Alkynes from anti‐3‐Aryl‐2,3‐dibromopropanoic Acids Using a K2CO3/DMSO System

A convenient, efficient, and generally applicable method was developed for the synthesis of terminal alkynes from anti‐3‐aryl‐2,3‐dibromopropanoic acids in the presence of DMSO and K₂CO₃.     

A comparative study of two polymorphs of bis(1‐hydroxy‐2‐methylpropan‐2‐aminium) carbonate

Alkanolamines have been known for their high CO₂ absorption for over 60 years and are used widely in the natural gas industry for reversible CO₂ capture. In an attempt to crystallize a salt of (RS)‐2‐(3‐benzoylphenyl)propionic acid with 2‐amino‐2‐methylpropan‐1‐ol, we obtained instead a polymorph (denoted polymorph II) of bis(1‐hydroxy‐2‐methylpropan‐2‐aminium) carbonate, 2C₄H₁₂NO⁺·CO₃²⁻, (I), suggesting that the amine group of the former compound captured CO₂ from the atmosphere forming the aminium carbonate salt. This new polymorph was characterized by single‐crystal X‐ray diffraction analysis at low temperature (100 K). The salt crystallizes in the monoclinic system (space group C2/c, Z = 4), while a previously reported form of the same salt (denoted polymorph I) crystallizes in the triclinic system (space group P, Z = 2) [Barzagli et al. (2012). ChemSusChem, 5 , 1724–1731]. The asymmetric unit of polymorph II contains one 1‐hydroxy‐2‐methylpropan‐2‐aminium cation and half a carbonate anion, located on a twofold axis, while the asymmetric unit of polymorph I contains two cations and one anion. These polymorphs exhibit similar structural features in their three‐dimensional packing. Indeed, similar layers of an alternating cation–anion–cation neutral structure are observed in their molecular arrangements. Within each layer, carbonate anions and 1‐hydroxy‐2‐methylpropan‐2‐aminium cations form planes bound to each other through N—H…O and O—H…O hydrogen bonds. In both polymorphs, the layers are linked to each other via van der Waals interactions and C—H…O contacts. In polymorph II, a highly directional C—H…O contact (C—H…O = 156°) shows as a hydrogen‐bonding interaction. Periodic theoretical density functional theory (DFT) calculations indicate that both polymorphs present very similar stabilities.     

Exploring amino acid‐tethered polymethacrylates as CO2‐sensitive macromolecules: A concealed property

Carbon dioxide (CO₂)‐responsive polymers have been gaining considerable interest because of their reactions with CO₂, giving rise to gas‐switchable properties, which can easily be reversed by mild heating or purging with inert gases. Herein, the synthesis of a series of side‐chain amino acids (alanine, leucine, isoleucine, phenylalanine, tryptophan) appending poly(meth)acrylates carrying primary amine (? NH₂) groups via reversible addition‐fragmentation chain transfer (RAFT) polymerization method was reported. It was found that alanine, leucine, isoleucine containing polymers displayed solubility–insolubility transition behavior and their associated property changes (solution transmittance, electrical conductivity, pH, zeta potential, and hydrodynamic diameter) in water upon alternate bubbling of CO₂/N₂ at room temperature. Among the three CO₂‐sensitive polymers only leucine based macromolecule was further chain extended with a thermoresponsive motif, di(ethylene glycol) methyl ether methacrylate (DEGMMA), via RAFT polymerization. CO₂‐tunable lower critical solution temperature and self‐assembling behavior of the diblock copolymer was carefully examined by UV–vis, ¹H NMR spectroscopy, dynamic light scattering (DLS), and field emission‐scanning electron microscopy (FE‐SEM) to establish dual thermo and gas‐tunable flip–flop micellizaion from the as‐synthesized block copolymer. Formation of polyammonium methacrylate bearing bicarbonate as counter anion is responsible for pendant primary amine containing polymer induced CO₂‐responsiveness. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2794–2803