The back cover picture shows a novel synthesis of 1,3‐oxazin‐6‐ones from enamides with CO2 through C—H carboxylation and one‐pot cyclization. The concept of “CO2 = CO + O”, using CO2 to replace toxic CO and stoichiometric oxidant, guilds the development of this chemistry as well as green and safe synthetic methods in the future. More details are discussed in the article by Yu et al. on page 430–436.
The inside back cover picture shows the construction of neutral supramolecular polymeric films containing well‐defined metallacycles as the main scaffolds through combination of coordination‐driven self‐assembly with post‐electropolymerization. A new 120° triphenylamine substituted dicarboxylate donor ligand and the complementary 120° triphenylamine functionalized di‐Pt(II) acceptor were employed to build neutral multi‐triphenylamine functionalized 2‐D metallacycles with the well‐defined shape and size via the formation of oxygen‐to‐platinum coordination bonds. Subsequent post‐electropolymerization of the obtained neutral multi‐triphenylamine containing metallacycles allowed for fabrication of a new type of neutral polymeric film with well‐controlled cavity sizes and thickness, which may have potential applications in neutral molecule detection, separation, and capture. More details are discussed in the article by Yang et al. on page 134–138.
The cover picture shows a new protocol for the NiCl2 ‐catalyzed cross‐electrophile coupling of aryl bromides with pyrimidin‐2‐yl tosylates to give the corresponding C2 ‐arylation pyrimidine derivatives. This study provides an improvement over previous methods by using pyrimidin‐2‐yl tosylates instead of halides as coupling partners that are stable and easily available. More details are discussed in the article by Wang et al. on page 1366–1370.
The inside cover picture shows a temperature controllable porphyrin aluminum catalyst using 5,10,15,20‐tetra(1,2,3,4,5,6,7,8‐octahydro‐1,4:5,8‐dimethanoanthracen‐9‐yl)porphyrin as ligand, which showed significantly temperature‐responsive selectivity in the coupling reaction of CO2 and PO. Only cycloaddition reaction happened at temperature above 75 °C to produce 100% CPC, whereas copolymerization became dominant to afford PPC with selectivity over 91% at temperature below 50 °C. More details are discussed in the article by Wang et al. on page 299–305.
The inside cover picture shows Metal‐organic layer (MOL), the two‐dimensional analog of metal‐organic framework (MOF), is a new member of two‐dimensional materials. This tutorial review summarizes current synthetic approaches for MOL preparation. More details are discussed in the article by Wang et al. on page 754–764.
A highly enantioselective one‐pot Strecker reaction of α‐fluoroalkyl α‐aryl ketones, anilines, and TMSCN is disclosed, which simultane‐ously reuses water byproduct and catalyst from the ketimine formation step as a promoter and an additive to improve the reactivity and enantioselectivity of the subsequent Strecker reaction, respectively. The picture shows that the chiral bifunctional tertiary amine mediated asymmetric Strecker reaction is irrigated by the water generated in the p‐TsOH catalyzed ketimine formation, and fertilized by the remaining acid catalyst. More details are discussed in the article by Zhou et al. on page 321–328.
The inside cover picture shows the excellent catalytic performance of mesoporous Nb and Nb‐W oxides catalysts for the conversion of glucose to 5‐hydroxymethylfurfural. The catalytic activity and selectivity for all Nb‐W oxides vary according to the ratio of Brønsted to Lewis acid sites. The highest HMF selectivity of 52% was achieved over Nb7W3 oxide catalyst. More details are discussed in the article by He et al. on page 1529–1539.
The cover picture shows The arylthio‐substituted tetrathiafulvalenes (Ar‐S‐TTFs) are electron donors having three reversible states, neutral, cation radical, and dication. The charge‐transfer (CT) between Ar‐S‐TTFs and iodine (I2) occurs in solution, whereas the Ar‐S‐TTFs are partially at cation radical state. In CT complexes of Ar‐S‐TTFs with I2, the charged states of Ar‐S‐TTFs are distinctly increased, say, the dicationic state is observed. The iodine components in CT complexes show various structures including 1‐D polymeric chain, and 2‐D and 3‐D iodine networks. More details are discussed in the article by Shao et al. on page 845–850.
The cover picture shows a synergistically directed assembly route towards novel multi‐component coordination architectures driven by aromatic donor‐acceptor and coordination interactions. The huge structural discrepancies between coronene donor present and absent experiments clearly prove the significance of aromatic donor‐accepter pairs and their inherent cooperation mechanism in these assembly processes. More details are discussed by Bu et al. on page 871–877.
The inside back cover picture shows a simple and efficient Cu(II )‐catalyzed ligand‐free oxidation of diarylmethanes and secondary alcohols using 70% TBHP in water. A series of diarylmethanes were directly oxidized into diaryl ketones in 67%–98% yields. Additionally, various secondary alcohols were also transformed into the desired products in 48%–98% yields. Importantly, the catalytic system in the absence of any organic solvent, surfactant, or phase transfer agent, had a wide substrate scope and a high tolerance for various functional groups. More details are discussed in the article by Liu et al. on page 1391–1395.
The inside cover picture shows Chiral β‐lactams and cyclobutanones are present in numerous natural and pharmaceutical products. A direct preparation of chiral four‐membered rings via metal‐catalyzed asymmetric hydrogenation has not been described yet. In this article, we report an Ir/BiphPHOX‐catalyzed asymmetric hydrogenation of α‐alkylidene β‐lactams and cyclobutanones for the direct preparation of β‐lactams and cyclobutanones bearing an α‐substituted stereocenter. Our tropos phosphine‐oxazoline biphenyl ligand is essential for the preparation of the desired products with high enantioselectivities. More details are discussed in the article by Zhang et al. on page 612–618.
The cover picture shows para‐Quinodimethane (p‐QDM) and ortho‐quinodimethane (o‐QDM) are two typical examples of Kekulé‐type delocalized diradicals. The cover picture shows that the replacement of the carbinyl centers with isoelectronic aminium centers leads to the formation of isolable nitrogen analogues of o‐QDM. In contrast to o‐QDM, the nitrogen analogues exhibit unexpected non‐Kekulé diradical characters and features open‐shell singlet ground states with thermally accessible triplet states. More details are discussed in the article by wang et al. on page 487–490.
The cover picture shows a new three‐dimensional non‐fullerene small molecular acceptor for solution‐processed organic solar cells. The acceptor was named SFTTIC using spiro‐bifluorene as the core unit linking with four thieno[3,2‐b ]thiophenes and end‐capped with 2‐(3‐oxo‐2,3‐dihydro‐1H ‐inden‐1‐ylidene)malononitrile. SFTTIC has a high absorption coefficient, good thermal stability and appropriate energy levels and the optimized power conversion efficiency (PCE) of 5.66% was achieved for the devices with PBDB‐T as donor material. These results indicate that the 3D non‐fullerene small molecule is potential for achieving high photovoltaic performance. More details are discussed in the article by Chen et al. on page 1687–1692.
The cover picture shows a simple milling‐mediated solid reduction method for fabricating of ultrafine gold catalysts. By solid grinding of the N‐modified SiO2 supported Au precursors with NaBH4, subnanometer‐sized clusters and isolated Au atoms can be facilely obtained by tuning the metal loading. This method establishes a good basis for fundamental understanding the size effect of Au in the hydrogenation of CO2 to formate, and provides a general methodology for supported nano‐catalyst preparation. More details are discussed in the article by Huang et al. on page 329–332.
The cover picture shows a protocol of a palladium‐catalyzed arylation of vinylarenes with diaryliodonium salts with the assistance of visible light. A palladium‐vinylarene complex may be excited via the visible light irradiation, where the kinetic isotope effect (kH/kD) was around 1.1. However under darkness, the reaction proceeded very slowly, and the kinetic isotope was found as 3.6, indicating the C—H bond cleavage step is the rate‐determining step. This protocol avoided high reaction temperature and enabled us to access a series of ortho tetra‐substituted vinylarene atropisomers with high enantiospecificity. More details are discussed in the article by Gu et al. on page 11–14.
The cover picture shows Two efficient intermolecular oxidative coupling reactions of (Z)‐enamines with isocyanides via palladium catalysis have been developed. In these transformations, the β‐C(sp2)‐H and/or C ＝ C bond were cut off selectively by using different anionic ligands, leading to controllable chemodivergent and stereoselective construction of a wide range of (E)β‐carbamoylenamine derivatives with intramolecular hydrogen bonds. More details are discussed in the article by Jiang et al. on page 712–715.
The inside cover picture shows the excellent catalytic performance of Karstedt's catalyst for the hydrosilylation of olefins terminated with various functional groups (amino, alkoxyl, carboxylic, hydroxyl, aldehyde, etc. ) with the trimethoxysilane and triethoxysilane reagents in terms of the yield and selectivity. More details are discussed in the article by Gao et al. on page 1227–1230.
The cover picture shows the complexity of the reaction mechanism of zeolites catalyzed methanol‐to‐olefins (MTO) conversion. The MTO process plays a vital role in the production of light olefins from nonpetroleum resources. Despite of the successful industrialization of the MTO process in China, the detailed reaction mechanism is not yet well understood. The theoretical studies on the MTO hydrocarbon pool mechanism by the Group of Xie are summarized in the Chemistry Author Up Close by Xie et al. on page 381–386.
The cover picture shows an efficient one‐pot condensation of maleimide derivatives in the presence of acetic acid and water to afford a series of benzene triimides (BTIs). The structure, physicochemical properties and electrochemistry behavior of BTIs were systematically investigated. Owing to the planar structure and unique electron‐deficient nature, BTIs can self‐assemble into different motifs. More details are discussed by Wang et al. on page 684–688.
The cover picture shows a green and highly efficient synthetic method for the synthesis of quinazoline‐2,4‐diones from readily available isatins and arylamines. This method is interesting in keeping with the notion of green chemistry because of the use of hydrogen peroxide as the terminal oxidant. The rearrangement oxidation exhibited good functional group tolerability, metal‐free catalysts, obviating the need for oxidants and only environmentally benign H2O was released. Moreover, an antibacterial activity study was performed to evaluate the antimicrobial activities. The results showed that some of the testing compounds inhibited the growth of the Staphylococcus aureus (32 μg/mL) and Staphylococcus epidermidis (64 μg/mL), which could potentially solve the problem of multidrug resistance. More details are discussed in the article by Shang et al. on page 1835–1843.
