Asymmetric Strecker Reaction Arising from the Molecular Orientation of an Achiral Imine at the Single‐Crystal Face: Enantioenriched l‐ and d‐Amino Acids

Strecker synthesis has long been considered one of the prebiotic reactions for the synthesis of α‐amino acids. However, the correlation between the origin of chirality and highly enantioenriched α‐amino acids through this method remains a puzzle. In the reaction, it may be conceivable that the handedness of amino acids has been determined at the formation stage of the chiral intermediate α‐aminonitrile, that is, the enantioselective addition of hydrogen cyanide to an imine. Herein, an enantiotopic crystal surface of an achiral imine acted as an origin of chirality for the enantioselective formation of α‐aminonitriles by the addition of HCN. In conjunction with the amplification of the enantiomeric excess and multiplication of enantioenriched aminonitrile, a large amount of near enantiopure α‐amino acids, with the l ‐ and d ‐handedness corresponding to the molecular orientation of the imine, is reported.     

Efficient Synthesis of Polycyclic γ‐Lactams by Catalytic Carbonylation of Ene‐Imines via Nickelacycle Intermediates

The nickel(0)‐catalyzed carbonylative cycloaddition of 1,5‐ and 1,6‐ene‐imines with carbon monoxide (CO) is reported. Key to this reaction is the efficient regeneration of the catalytically active nickel(0) species from nickel carbonyl complexes such as [Ni(CO)₃L]. A variety of tri‐ and tetracyclic γ‐lactams were thus prepared in excellent yields with 100 % atom efficiency. Preliminary results on asymmetric derivatives promise potential in the synthesis of enantioenriched polycyclic γ‐lactams.     

Selective Engineering of Linkage‐Specific α2,6‐N‐Linked Sialoproteins Using Sydnone‐Modified Sialic Acid Bioorthogonal Reporters

The metabolic oligosaccharide engineering (MOE) strategy using unnatural sialic acids has recently enabled the visualization of the sialome in living systems. However, MOE only reports on global sialylation and dissected information regarding subsets of sialosides is missing. Described here is the synthesis and utilization of sialic acids modified with a sydnone reporter for the metabolic labeling of sialoconjugates. The positioning of the reporter on the sugar significantly altered its metabolic fate. Further in vitro enzymatic assays revealed that the 9‐modified neuraminic acid is preferentially accepted by the sialyltransferase ST6Gal‐I over ST3Gal‐IV, leading to the favored incorporation of the reporter into linkage‐specific α2,6‐N‐linked sialoproteins. This sydnone sugar presents the possibility of investigating the roles of specific sialosides.     

One‐Pot Multicomponent Synthesis of β‐Amino Amides

Multicomponent reactions are excellent tools for rapid generation of small molecules with broad chemical diversity and molecular complexity. Herein, a novel one‐pot multicomponent synthesis of β‐amino amides from aldehydes, anilines, carboxylic acids and ynamides has been successfully developed. This process is practical and efficient to unravel synthetic utility and scalability. Moreover, an isotope labeling reaction was conducted to elucidate a plausible reaction mechanism.     

A General,Activator‐Free Palladium‐Catalyzed Synthesis of Arylacetic and Benzoic Acids from Formic Acid

A new catalyst for the carboxylative synthesis of arylacetic and benzoic acids using formic acid (HCOOH) as the CO surrogate was developed. In an improvement over previous work, CO is generated in situ without the need for any additional activators. Key to success was the use of a specific system consisting of palladium acetate and 1,2‐bis((tert‐butyl(2‐pyridinyl)phosphinyl)methyl)benzene. The generality of this method is demonstrated by the synthesis of more than 30 carboxylic acids, including non‐steroidal anti‐inflammatory drugs (NSAIDs), under mild conditions in good yields.     

Regio‐ and Enantio‐selective Chemo‐enzymatic C−H‐Lactonization of Decanoic Acid to (S)‐δ‐Decalactone

The conversion of saturated fatty acids to high value chiral hydroxy‐acids and lactones poses a number of synthetic challenges: the activation of unreactive C?H bonds and the need for regio‐ and stereoselectivity. Here the first example of a wild‐type cytochrome P450 monooxygenase (CYP116B46 from Tepidiphilus thermophilus) capable of enantio‐ and regioselective C5 hydroxylation of decanoic acid 1 to (S)‐5‐hydroxydecanoic acid 2 is reported. Subsequent lactonization yields (S)‐δ‐decalactone 3 , a high value fragrance compound, with greater than 90 % ee. Docking studies provide a rationale for the high regio‐ and enantioselectivity of the reaction.     

Dianionic Mononuclear Cyclo‐P4 Complexes of Zero‐Valent Molybdenum: Coordination of the Cyclo‐P4 Dianion in the Absence of Intramolecular Charge Transfer

Relative to other cyclic poly‐phosphorus species (that is, cyclo‐P_n), the planar cyclo‐P₄ group is unique in its requirement of two additional electrons to achieve aromaticity. These electrons are supplied from one or more metal centers. However, the degree of charge transfer is dependent on the nature of the metal fragment. Unique examples of dianionic mononuclear η⁴‐P₄ complexes are presented that can be viewed as the simple coordination of the [cyclo‐P₄]^2? dianion to a neutral metal fragment. Treatment of the neutral, molybdenum cyclo‐P₄ complexes Mo(η⁴‐P₄)I₂(CO)(CNAr^Dipp2)₂ and Mo(η⁴‐P₄)(CO)₂(CNAr^Dipp2)₂ with KC₈ produces the dianionic, three‐legged piano stool complexes, [Mo(η⁴‐P₄)(CO)(CNAr^Dipp2)₂]^2? and [Mo(η⁴‐P₄)(CO)₂(CNAr^Dipp2)]^2?, respectively. Structural, spectroscopic, and computational studies reveal a similarity to the classic η⁶‐benzene complex (η⁶‐C₆H₆)Mo(CO)₃ regarding the metal‐center valence state and electronic population of the planar‐cyclic ligand π system.     

Palladium‐Catalyzed Decarbonylative Dehydration for the Synthesis of α‐Vinyl Carbonyl Compounds and Total Synthesis of (−)‐Aspewentins A,B, and C

The direct α‐vinylation of carbonyl compounds to form a quaternary stereocenter is a challenging transformation. It was discovered that δ‐oxocarboxylic acids can serve as masked vinyl compounds and be unveiled by palladium‐catalyzed decarbonylative dehydration. The carboxylic acids are readily available through enantioselective acrylate addition or asymmetric allylic alkylation. A variety of α‐vinyl quaternary carbonyl compounds are obtained in good yields, and an application in the first enantioselective total synthesis of (−)‐aspewentins A, B, and C is demonstrated.     

Reductive Molybdenum‐Catalyzed Direct Amination of Boronic Acids with Nitro Compounds

The synthesis of aromatic amines is of utmost importance in a wide range of chemical contexts. We report a direct amination of boronic acids with nitro compounds to yield (hetero)aryl amines. The novel combination of a dioxomolybdenum(VI) catalyst and triphenylphosphine as inexpensive reductant has revealed to be decisive to achieve this new C?N coupling. Our methodology has proven to be scalable, air and moisture tolerant, highly chemoselective and engages both aliphatic and aromatic nitro compounds. Moreover, this general and step‐economical synthesis of aromatic secondary amines showcases orthogonality to other aromatic amine syntheses as it tolerates aryl halides and carbonyl compounds.     

Synthesis of Carboxylic Acids by Palladium‐Catalyzed Hydroxycarbonylation

The synthesis of carboxylic acids is of fundamental importance in the chemical industry and the corresponding products find numerous applications for polymers, cosmetics, pharmaceuticals, agrochemicals, and other manufactured chemicals. Although hydroxycarbonylations of olefins have been known for more than 60 years, currently known catalyst systems for this transformation do not fulfill industrial requirements, for example, stability. Presented herein for the first time is an aqueous‐phase protocol that allows conversion of various olefins, including sterically hindered and demanding tetra‐, tri‐, and 1,1‐disubstituted systems, as well as terminal alkenes, into the corresponding carboxylic acids in excellent yields. The outstanding stability of the catalyst system (26 recycling runs in 32 days without measurable loss of activity), is showcased in the preparation of an industrially relevant fatty acid. Key‐to‐success is the use of a built‐in‐base ligand under acidic aqueous conditions. This catalytic system is expected to provide a basis for new cost‐competitive processes for the industrial production of carboxylic acids.     

Palladium‐Catalyzed Enantioselective Thiocarbonylation of Styrenes

A highly enantioselective thiocarbonylation of styrenes with CO and thiols has been achieved by Pd catalysis, providing highly enantioenriched thioesters in good to excellent yields. Key to the successful execution of this reaction is the use of a chiral sulfoxide‐(P‐dialkyl)‐phosphine (SOP) ligands. This thiocarbonylation proceeds smoothly under mild reaction conditions (1 atm CO and 0 °C) and displays broad substrate scope. Also demonstrated is that this transformation can be conducted using surrogates of CO, greatly increasing the safety aspects of running the reaction. The generality and utility of the method is manifested by its application to the synthetic transformations of thioester products and the direct acylation of cysteine‐containing dipeptides. A primary mechanism was investigated and a plausible catalytic cycle was proposed.     

Diferrocenophosphaborin: A Planar‐Chiral,Redox‐Active and Anion‐Responsive Ambiphilic Ligand

A new class of Janus‐like ambiphilic ligands is introduced. The rigid diferrocene backbone in heterocycles 4‐SnP and 4‐BP creates an unprecedented chiral environment as demonstrated by multinuclear NMR and single‐crystal X‐ray studies. In addition, the ligands are redox‐responsive and the Lewis acidic borane moiety in 4‐BP can be exploited to further tune the properties: a clear decrease in the CO stretching frequency of a Vaska‐type Rh^I complex 5‐BP is observed upon addition of fluoride ions. Thus, the Lewis acid and Lewis base sites influence each other and their strength can be modulated by redox chemistry and anion binding.     

Carbonylation of C−N Bonds in Tertiary Amines Catalyzed by Low‐Valent Iron Catalysts

The first iron catalysts able to promote the formal insertion of CO into the C?N bond of amines are reported. Using low‐valent iron complexes, including K₂[Fe(CO)₄], amides are formed from aromatic and aliphatic amines, in the presence of an iodoalkane promoter. Inorganic Lewis acids, such as AlCl₃ and Nd(OTf)₃, have a positive influence on the catalytic activity of the iron salts, enabling the carbonylation at a low pressure of CO (6 to 8 bars).     

Ynamide‐Mediated Thiopeptide Synthesis

Exploration of the full potential of thioamide substitution as a tool in the chemical biology of peptides and proteins has been hampered by insufficient synthetic strategies for the site‐specific introduction of a thioamide bond into a peptide backbone. A novel ynamide‐mediated two‐step strategy for thiopeptide bond formation with readily available monothiocarboxylic acids as thioacyl donors is described. The α‐thioacyloxyenamide intermediates formed from the ynamides and monothiocarboxylic acids can be purified, characterized, and stored. The balance between their activity and stability enables them to act as effective thioacylating reagents to afford thiopeptide bonds under mild reaction conditions. Amino acid functional groups such as OH, CONH₂, and indole NH groups need not be protected during thiopeptide synthesis. The modular nature of this strategy enables the site‐specific incorporation of a thioamide bond into peptide backbones in both solution and the solid phase.     

Copper‐Catalyzed Synthesis of γ‐Amino Acids Featuring Quaternary Stereocenters

The first general asymmetric synthesis of γ,γ‐disubstituted γ‐amino acids by copper‐catalyzed ring opening of nonstrained lactones with amines is reported. This approach features ample scope, operational simplicity, and wide functional‐group diversity. The catalytic process allows access to a series of highly functionalized enantioenriched γ‐amino acids featuring quaternary stereocenters with excellent enantiomeric ratios of up to 98:2 and excellent yields of up to 98 %.     

2,4,6‐Tri(hydroxy)‐1,3,5‐triphosphinine,P3C3(OH)3: The Phosphorus Analogue of Cyanuric Acid

Cyanuric acid (C₃H₃N₃O₃) is widely used as cross‐linker in basic polymers (often in combination with other crosslinking agents like melamine) but also finds application in more sophisticated materials such as in supramolecular assemblies and molecular sheets. The unknown phosphorus analogue of cyanuric acid, P₃C₃(OH)₃, may become an equally useful building block for phosphorus‐based polymers or materials which have unique properties. ¹ Herein we describe a straightforward synthesis of 2,4,6‐tri(hydroxy)‐1,3,5‐triphosphinine and its derivatives P₃C₃(OR)₃ which have been applied as strong π‐acceptor η⁶‐ligands in piano stool Mo(CO)₃ complexes.     

Discrete π‐Stacks from Self‐Assembled Perylenediimide Analogues

The formation of well‐defined finite‐sized aggregates represents an attractive goal in supramolecular chemistry. In particular, construction of discrete π‐stacked dye assemblies remains a challenge. Reported here is the design and synthesis of a novel type of discrete π‐stacked aggregate from two comparable perylenediimide (PDI) dyads ( PEP and PBP ). The criss‐cross PEP ‐ PBP dimers in solution and ( PBP ‐ PEP )‐( PEP ‐ PBP ) tetramers in the solid state are well elucidated using single‐crystal X‐ray diffraction, dynamic light scattering, and diffusion‐ordered NMR spectroscopy. Extensive π–π stacking between the PDI units of PEP and PBP as well as repulsive interactions of swallow‐tailed alkyl substituents are responsible for the selective formation of discrete dimer and tetramer stacks. Our results reveal a new approach to preparing discrete π stacks that are appealing for making assemblies with well‐defined optoelectronic properties.     

Ligand‐Enabled β‐C–H Arylation of α‐Amino Acids Without Installing Exogenous Directing Groups

Herein we report acid‐directed β‐C(sp³)‐H arylation of α‐amino acids enabled by pyridine‐type ligands. This reaction does not require the installation of an exogenous directing group, is scalable, and enables the preparation of Fmoc‐protected unnatural amino acids in three steps. The pyridine‐type ligands are crucial for the development of this new C(sp³)‐H arylation.     

Stereoselective Synthesis of Highly Substituted Conjugated Dienes via Pd‐Catalyzed Carbonylation of 1,3‐Diynes

The stereoselective synthesis of conjugated dienes was realized for the first time via Pd‐catalyzed alkoxycarbonylation of easily available 1,3‐diynes. Key to success is the utilization of the specific ligand 1,1′‐ferrocenediyl‐bis(tert‐butyl(pyridin‐2‐yl)phosphine) ( L1 ), which allows this novel transformation to proceed at room temperature. A range of 1,2,3,4‐tetrasubstituted conjugated dienes are obtained in this straightforward access in high yields and selectivities. The synthetic utility of the protocol is showcased in the concise synthesis of several important intermediates for construction of natural products rac‐cagayanin, rac‐galbulin, rac‐agastinol, and cannabisin G.     

Catalytic Enantioselective Synthesis of 2,5‐Dihydrooxepines

A Michael addition initiated cyclopropanation/retro‐Claisen rearrangement tandem reaction was developed for the enantioselective synthesis of highly functionalized 2,5‐dihydrooxepines. In the presence of a chiral oxazaborolidinium ion (COBI) catalyst, the reaction proceeds to give good yields and high enantioselectivity.