New advances in microfluidic flow cytometry

In recent years, researchers are paying the increasing attention to the development of portable microfluidic diagnostic devices including microfluidic flow cytometry for the point‐of‐care testing. Microfluidic flow cytometry, where microfluidics and flow cytometry work together to realize novel functionalities on the microchip, provides a powerful tool for measuring the multiple characteristics of biological samples. The development of a portable, low‐cost, and compact flow cytometer can benefit the health care in underserved areas such as Africa or Asia. In this article, we review recent advancements of microfluidics including sample pumping, focusing and sorting, novel detection approaches, and data analysis in the field of flow cytometry. The challenge of microfluidic flow cytometry is also examined briefly.     

Surface‐Tension‐Confined Microfluidics and Their Applications

This article is a brief overview of the emerging microfluidic systems called surface‐tension‐confined microfluidic (STCM) devices. STCM devices utilize surface energy that can control the movement of fluid droplets. Unlike conventional poly(dimethylsiloxane)‐based microfluidics which confine the movement of fluids by three‐dimensional (3D) microchannels, STCM systems provide two‐dimensional (2D) platforms for microfluidics. A variety of STCM devices have been prepared by various micro‐/nanofabrication strategies. Advantages of STCM devices over conventional microfluidics are significant reduction of energy consumption during device operation, facile introduction of fluids onto 2D microchannels without the use of a micropump, increased flow rate in a special type of STCM device, among others. Thus, STCM devices can be excellent alternatives for certain areas in microfluidics. In this Minireview, fabrication methods, operating modes, and applications of STCM devices are introduced.     

Microfluidics: Applications for analytical purposes in chemistry and biochemistry

In this review, we present recent advancements and novel developments in fluidic systems for applied analytical purposes in chemistry, biochemistry, and life science in general that employ and reflect the full benefits of microfluidics. A staggering rise in publications related to integrated, all‐in‐one microfluidic chips capable of separation, reaction, and detection have been observed, all of which realise the principal of micro total analysis systems or lab‐on‐a‐chip. These integrated chips actively adopt the scaling law concepts, utilising the highly developed fabrication techniques. Their aim is to multi‐functionalise and fully automate devices believed to assist the future advancements of point‐of‐care, clinical, and medical diagnostics.     

Integrated microfluidic devices

“With the fundamentals of microscale flow and species transport well developed, the recent trend in microfluidics has been to work towards the development of integrated devices which incorporate multiple fluidic, electronic and mechanical components or chemical processes onto a single chip sized substrate. Along with this has been a major push towards portability and therefore a decreased reliance on external infrastructure (such as detection sensors, heaters or voltage sources).” In this review we provide an in-depth look at the “state-of-the-art” in integrated microfludic devices for a broad range of application areas from on-chip DNA analysis, immunoassays and cytometry to advances in integrated detection technologies for and miniaturized fuel processing devices. In each area a few representative devices are examined with the intent of introducing the operating procedure, construction materials and manufacturing technique, as well as any unique and interesting features.     

Optical imaging techniques in microfluidics and their applications

Microfluidic devices have undergone rapid development in recent years and provide a lab-on-a-chip solution for many biomedical and chemical applications. Optical imaging techniques are essential in microfluidics for observing and extracting information from biological or chemical samples. Traditionally, imaging in microfluidics is achieved by bench-top conventional microscopes or other bulky imaging systems. More recently, many novel compact microscopic techniques have been developed to provide a low-cost and portable solution. In this review, we provide an overview of optical imaging techniques used in microfluidics followed with their applications. We first discuss bulky imaging systems including microscopes and interferometer-based techniques, then we focus on compact imaging systems that can be better integrated with microfluidic devices, including digital in-line holography and scanning-based imaging techniques. The applications in biomedicine or chemistry are also discussed along with the specific imaging techniques.     

Microdroplets in Microfluidics: An Evolving Platform for Discoveries in Chemistry and Biology

Microdroplets in microfluidics offer a great number of opportunities in chemical and biological research. They provide a compartment in which species or reactions can be isolated, they are monodisperse and therefore suitable for quantitative studies, they offer the possibility to work with extremely small volumes, single cells, or single molecules, and are suitable for high‐throughput experiments. The aim of this Review is to show the importance of these features in enabling new experiments in biology and chemistry. The recent advances in device fabrication are highlighted as are the remaining technological challenges. Examples are presented to show how compartmentalization, monodispersity, single‐molecule sensitivity, and high throughput have been exploited in experiments that would have been extremely difficult outside the microfluidics platform.     

Forensic drug analysis and microfluidics

The analysis of drugs of abuse in microfluidic devices has the potential to provide solutions to today's on‐site analysis challenges. The use of such devices has not been limited to miniaturising conventional analytical methods used routinely in forensic laboratories; new and interesting approaches have been implemented in microfluidics and benefit from the ability to control minute amounts of liquids in the small channels. The microfluidic platforms developed so far have been used successfully to carry out single or multiple analytical processes and offer a great opportunity for new technologies for on‐site drug testing.     

Beyond the Capture of Circulating Tumor Cells: Next‐Generation Devices and Materials

Over the last decade, significant progress has been made towards the development of approaches that enable the capture of rare circulating tumor cells (CTCs) from the blood of cancer patients, a critical capability for noninvasive tumor profiling. These advances have leveraged new insights in materials chemistry and microfluidics and allowed the capture and enumeration of CTCs with unprecedented sensitivity. However, it has become increasingly clear that simply capturing and counting tumor cells launched into the bloodstream may not provide the information needed to advance our understanding of the biology of these rare cells, or to allow us to better exploit them in medicine. A variety of advances have now emerged demonstrating that more information can be extracted from CTCs with next‐generation devices and materials featuring tailored physical and chemical properties. In this Minireview, the last ten years of work in this area will be discussed, with an emphasis on the groundbreaking work of the last five years, during which the focus has moved beyond the simple capture of CTCs and gravitated towards approaches that enable in‐depth analysis.     

Critical fluctuations and static inhomogeneities in polymer gel volume phase transitions

Thermoresponsive polymer gels exhibit pronounced swelling and deswelling upon changes in temperature, accompanied by dynamic concentration fluctuations that have been interpreted as critical opalescence. These fluctuations span lengthscales similar to that of static structures in the gels, such as the gel polymer‐network meshsize (1–10 nm) and static polymer‐network crosslinking inhomogeneities (10–1000 nm). To systematically investigate this overlay, we use droplet‐based microfluidics and fabricate submillimeter‐sized gel particles with varying static heterogeneity, as revealed on a molecular scale by proton NMR. When these microgels are probed by small‐angle neutron scattering, the detection of dynamic fluctuations during the volume phase transitions is strongly perturbed by the co‐existing static inhomogeneity. Depending of the type of data analysis employed, the temperature‐dependent evolution of the correlation length associated to the dynamic fluctuations does or does not agree with predictions by the critical scaling theory. Only the most homogeneous sample of this study, prepared by controlled polymer crosslinking in droplet microfluidics, shows a diverging correlation length in agreement to the critical scaling theory independent of the specific approach of data analysis. These findings suggest that care must be taken about polymer‐network heterogeneity when gel volume phase transitions are evaluated as critical phenomena. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1112–1122     

Simultaneous electrochemical detection in paper-based analytical devices

The growing need for reliable analytical tools to perform measurements at the point-of-need has prompted the development of novel sensors that are low cost, portable, sensitive, easy to use, and capable of multiplexed analysis. Miniaturization of the sensors into microfluidic platforms has become a promising approach to achieve these self-contained sensors. However, traditional microfluidics often require relatively expensive and complicated pumping mechanisms that increase the cost and limit the portability of the sensors. From a material perspective, paper is an attractive substrate for constructing point-of-need sensors because of its affordability, vast availability, and self-pumping ability, particularly when combined with electrochemical detection. In this mini-review, we discuss various strategies to achieve multiplexing or simultaneous detection of multiple analytes in electrochemical paper-based devices and provide a brief guide on selecting the detection strategy based on the electrochemical property of the analytes.     

Recent strategies toward microfluidic‐based surface‐enhanced Raman spectroscopy

Surface‐enhanced Raman spectroscopy (SERS) is an extremely powerful analytical tool, which not only yields information about the molecular structure of the analyte in the form of characteristic vibrational spectrum but also gives sensitivities approaching those in fluorescence spectroscopy. The SERS measurement on the microfluidic platform provides possibility to manufacture the device with design perfectly fulfilling the needs of the application with minimal sample consumption. This review aims at describing basic strategies for SERS measurement in microfluidic devices published in the last decade and covers current trends in microfluidics with SERS detection in the field of bioanalysis and approaches toward on‐line coupling of liquid‐based separation techniques with SERS detection.     

A review on microfluidics in the detection of food pesticide residues

This paper briefly explains the food safety problems related to pesticide residues and introduces microfluidics technology as a pesticide residue detection method. Three mainstream microfluidic detection devices are detailed: one driven by liquid surface tension, one by motor siphon drive, and one by centrifugal force. The advantages and disadvantages of each are considered in an analysis of future trends in microfluidic technology for pesticide detection.     

Determining thermo‐mechanical properties of polydimethylsiloxanes from their strain‐induced spectral fingerprints

Adaptive properties and complex shapes of modern day soft matter components create a challenge for materials applications where mechanical properties of intricate fabricated components cannot be determined from conventional invasive and destructive mechanical tests. In particular, challenges arising from variable mechanical properties of polydimethylsiloxanes (PDMSs) constantly attract wide‐scale attention in the fields of material sciences, biological systems, and microfluidics. Herein, a noninvasive and nondestructive strain‐induced infrared spectroscopic method (S‐FTIR) is developed. S‐FTIR is a method that maps thermo‐mechanical response of PDMS to its strain‐induced spectral fingerprint. From the results of this study, strong correlations of up to 95% between spectral fingerprint of PDMS and its corresponding nonlinear thermo‐mechanical response is seen. Given the nature of these results, it is expected that S‐FTIR will provide an interesting new analytical approach to understand soft materials and allow for the characterization of micro and nanoscale devices composed of these polymeric materials as well. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 359–367     

智能手机在生化传感分析中的应用进展

该文主要综述了基于智能手机生化检测的光学和电化学检测技术,及其在生化传感分析中强大的通信手段。重点介绍了智能手机集成的生化传感器技术的性能、优点,及其在生化检测中的应用,讨论了目前智能手机在生化传感分析方面存在的局限性和面临的挑战,并展望了未来的发展方向和潜在的机遇。     

NMR data visualization,processing, and analysis on mobile devices

Touch‐screen computers are emerging as a popular platform for many applications, including those in chemistry and analytical sciences. In this work, we present our implementation of a new NMR ‘app’ designed for hand‐held and portable touch‐controlled devices, such as smartphones and tablets. It features a flexible architecture formed by a powerful NMR processing and analysis kernel and an intuitive user interface that makes full use of the smart devices haptic capabilities. Routine 1D and 2D NMR spectra acquired in most NMR instruments can be processed in a fully unattended way. More advanced experiments such as non‐uniform sampled NMR spectra are also supported through a very efficient parallelized Modified Iterative Soft Thresholding algorithm. Specific technical development features as well as the overall feasibility of using NMR software apps will also be discussed. All aspects considered the functionalities of the app allowing it to work as a stand‐alone tool or as a ‘companion’ to more advanced desktop applications such as Mnova NMR. Copyright © 2015 John Wiley & Sons, Ltd.     

Microfluidics in macro-biomolecules analysis: macro inside in a nano world

Use of microfluidic devices in the life sciences and medicine has created the possibility of performing investigations at the molecular level. Moreover, microfluidic devices are also part of the technological framework that has enabled a new type of scientific information to be revealed, i.e. that based on intensive screening of complete sets of gene and protein sequences. A deeper bioanalytical perspective may provide quantitative and qualitative tools, enabling study of various diseases and, eventually, may offer support for the development of accurate and reliable methods for clinical assessment. This would open the way to molecule-based diagnostics, i.e. establish accurate diagnosis and disease prognosis based on identification and/or quantification of biomacromolecules, for example proteins or nucleic acids. Finally, the development of disposable and portable devices for molecule-based diagnosis would provide the perfect translation of the science behind life-science research into practical applications dedicated to patients and health practitioners. This review provides an analytical perspective of the impact of microfluidics on the detection and characterization of bio-macromolecules involved in pathological processes. The main features of molecule-based diagnostics and the specific requirements for the diagnostic devices are discussed. Further, the techniques currently used for testing bio-macromolecules for potential diagnostic purposes are identified, emphasizing the newest developments. Subsequently, the challenges of this type of application and the status of commercially available devices are highlighted, and future trends are noted.     

Particles and microfluidics merged: perspectives of highly sensitive diagnostic detection

There is a growing need for diagnostic technologies that provide laboratories with solutions that improve quality, enhance laboratory system productivity, and provide accurate detection of a broad range of infectious diseases and cancers. Recent advances in micro- and nanoscience and engineering, in particular in the areas of particles and microfluidic technologies, have advanced the “lab-on-a-chip” concept towards the development of a new generation of point-of-care diagnostic devices that could significantly enhance test sensitivity and speed. In this review, we will discuss many of the recent advances in microfluidics and particle technologies with an eye towards merging these two technologies for application in medical diagnostics. Although the potential diagnostic applications are virtually unlimited, the most important applications are foreseen in the areas of biomarker research, cancer diagnosis, and detection of infectious microorganisms.

New advances in electrochemical biosensors for the detection of toxins: Nanomaterials,magnetic beads and microfluidics systems. A review

The use of nanotechnology in bioanalytical devices has special advantages in the detection of toxins of interest in food safety and environmental applications. The low levels to be detected and the small size of toxins justify the increasing number of publications dealing with electrochemical biosensors, due to their high sensitivity and design versatility. The incorporation of nanomaterials in their development has been exploited to further increase their sensitivity, providing simple and fast devices, with multiplexed capabilities. This paper gives an overview of the electrochemical biosensors that have incorporated carbon and metal nanomaterials in their configurations for the detection of toxins. Biosensing systems based on magnetic beads or integrated into microfluidics systems have also been considered because of their contribution to the development of compact analytical devices. The roles of these materials, the methods used for their incorporation in the biosensor configurations as well as the advantages they provide to the analyses are summarised.     

A rapid,straightforward, and print house compatible mass fabrication method for integrating 3D paper‐based microfluidics

Three‐dimensional (3D) paper‐based microfluidics, which is featured with high performance and speedy determination, promise to carry out multistep sample pretreatment and orderly chemical reaction, which have been used for medical diagnosis, cell culture, environment determination, and so on with broad market prospect. However, there are some drawbacks in the existing fabrication methods for 3D paper‐based microfluidics, such as, cumbersome and time‐consuming device assembly; expensive and difficult process for manufacture; contamination caused by organic reagents from their fabrication process. Here, we present a simple printing–bookbinding method for mass fabricating 3D paper‐based microfluidics. This approach involves two main steps: (i) wax‐printing, (ii) bookbinding. We tested the delivery capability, diffusion rate, homogeneity and demonstrated the applicability of the device to chemical analysis by nitrite colorimetric assays. The described method is rapid (<30 s), cheap, easy to manipulate, and compatible with the flat stitching method that is common in a print house, making itself an ideal scheme for large‐scale production of 3D paper‐based microfluidics.     

Miniaturized surface engineered technologies for multiplex biosensing devices

The demand for quick, accurate, and affordable point-of-care (POC) devices increases with the advancement in the dimensions of nanotechnology and digital interfaces (Internet of Things). The future of diagnostic requires the platform which can provide us the following benefits i. e., on-site detection, qualitative as well as quantitative analysis, easy to use, portable, low sample requirement, cost-effective, and have multiplexing proficiency. Multiplex biosensing platforms (MBPs) have the above following advantages so are going to be mostly used in various healthcare applications in near future. MBPs have the potential to fulfill the ‘ASSURED’ criteria specified by the World Health Organization (WHO) for remote-limited settings. This review paper focuses on miniaturized platforms that have multiplexing benefits for the bioanalysis of different clinical samples related to various healthcare applications. In addition to this, screening of pesticides, antibiotics, and hazardous metal ions with these surface-engineered devices has also been accounted in food and environmental samples. Some of the advanced techniques including microfluidics (Lab-on-a-chip), wearable smart devices, and CRISPR/Cas system for multiplexing applications are briefly described here. Furthermore, various needs, challenges, and prospects in commercializing these multiplexed surface-engineered devices have been discussed in this review.