Small molecule adsorption on to polyester capillary‐channeled polymer fibers: Frontal analysis of naphthalene and naphthol (naphthalene and naphthol adsorption on capillary‐channeled polymer fibers)

Frontal analysis was carried out employing poly(ethylene‐terephthalate) capillary‐channeled polymer fibers as the stationary phase for the immobilization of low‐molecular‐weight polycyclic aromatic hydrocarbon compounds (naphthol and naphthalene) from 2% methanol/water solutions. The effects of several experimental parameters on the frontal profile, the breakthrough volume, and the equilibrium parameters were determined for each solute. The amount adsorbed at exhaustion of naphthalene and naphthol was also compared. The kinetics and thermodynamics were maintained at relatively fast flow rates/linear velocities (～6–18 mm/s). Comparisons of dynamic capacity revealed that naphthalene was more retained than naphthol, in most situations more than five times that of the naphthol adsorption. This increase in capacity is most likely due to the multilayering of naphthalene on the surface of the fibers through π–π interactions between the solute and the fiber surface and successive layering of solute molecules. The extent of layering is a function of the flow, with faster flow rates (and subsequent shear forces) reducing the extent of adsorbate–adsorbate interactions. Although the overall loading capacity of the capillary‐channeled polymer fibers is far below porous phases, there are a number of attractive attributes that support further development.     

Dynamic evaluation of polypropylene capillary‐channeled fibers as a stationary phase in high‐performance liquid chromatography

Polypropylene (PP) capillary‐channeled polymer (C‐CP) fiber stationary phases are investigated for applications in HPLC. Specifically, the roles that fiber size and shape, linear velocity, interstitial fraction, and column inner diameter play in separation efficiency were evaluated using a uracil and butylparaben mixture eluted under isocratic conditions. Four fiber types, having nominal diameters ranging from 30 to 65 μm, were used in 250 mm × 2.1 mm columns. Optimum flow characteristics, as judged by plate height and resolution, were observed for 40 μm diameter PP C‐CP fibers packed at an interstitial fraction of ～0.63, over a broad range of linear velocities (～2 to 37 mm/s). The influence of column inner diameter was studied on 1.5, 2.1, and 4.6 mm columns packed at the optimal interstitial fraction. The best performing column in terms of plate height and resolution was the 2.1 mm inner diameter. C‐CP columns were also evaluated for the separation of a protein mixture composed of ribonuclease A, cytochrome c, and transferrin. Results obtained with the biomacromolecules mixture validate the optimal structural and operative conditions determined with the small solutes, laying the groundwork towards biomacromolecule applications, focusing more on the chemical aspects of separations.     

Initial evaluation of protein A modified capillary‐channeled polymer fibers for the capture and recovery of immunoglobulin G

A novel protein A affinity chromatography stationary phase has been developed from polypropylene capillary‐channeled polymer fibers modified with a recombinant protein A ligand for the capture and recovery of immunoglobulin G (IgG) with high specificity and yield. An SPE micropipette tip format was employed so that solvent, protein, and antibody consumption was minimized. The adsorption modification of the fiber surfaces with protein A was evaluated as a function of feed concentration and volume. Optimal modification of the fiber surface with protein A yielded a 5.7 mg/mL (bed volume) ligand capacity with the modified fibers showing stability across numerous solvent environments. Performance was evaluated through exposure to human IgG and myoglobin, individually and as a mixture. Myoglobin was used as a surrogate for host cell proteins common to growth media. The efficacy of the selective binding to the ligand is demonstrated by the 2.9:1 (IgG/protein A) binding stoichiometry. Elution with 0.1 M acetic acid yielded an 89% recovery of the captured IgG based on absorption measurements of the collected eluents. Regeneration was possible with 10 mM NaOH. Protein A modified polypropylene capillary‐channeled polymer fibers show promising initial results as an affinity phase for efficient capture and purification of IgG.     

Loading characteristics and chemical stability of headgroup‐functionalized poly(ethylene glycol)‐lipid ligand tethers on polypropylene capillary‐channeled polymer fibers

Polypropylene capillary‐channeled polymer fibers have been modified by adsorption of headgroup‐functionalized poly(ethylene glycol)‐lipids to generate a species‐specific stationary phase. In order to study ligand binding characteristics, a fluorescein‐labeled poly(ethylene glycol)‐lipid was used as a model system. Breakthrough curves and frontal analysis were employed to characterize the surface loading characteristics across a range of lipid concentrations and mobile phase flow rates. Efficient mass transfer and fluid transport yield a linear adsorption isotherm up to the maximum loading concentration of 3 mg/mL, at a linear velocity of 57.1 mm/s. Under these conditions, the dynamic binding capacity was found to be 1.52 mg/g of fiber support. Variation of the linear velocity from 8.6 to 57.1 mm/s showed only small changes in breakthrough volume. The maximum capacity of 1.8 mg/g is found under conditions of a load velocity of 34.2 mm/s and a concentration of 3 mg/mL lipid. Exposure of the lipid modified fibers to several challenge solvents reveals a chemically robust system, with only 50% acetonitrile and hexanes able to disrupt the lipid adsorption. The straightforward capillary‐channeled polymer fiber surface modification with headgroup‐functionalized lipids provides both a diverse yet practically robust ligand tethering system.     

Preparation and investigation of LC packing made by microwave‐assisted solid‐phase synthesis

The preparation of the so‐called bonded phase liquid chromatographic packings is usually carried out by heating the silica, the silane, a catalyst, or a scavenger in an appropriate solvent (often toluene.) Due to the longtime of boiling, the procedure is time and energy consuming, and solvent intensive. The goal of this work is to present a simple, environment‐friendly preparation method with reduced solvent consumption to synthetize RP liquid chromatographic stationary phases. The effects of reaction conditions (amount of reagents, composition of the reagent, microwave energy, reaction time, reproducibility of the synthesis) are discussed. Pore structure, surface coverage, the change of the pore structure and surface coverage upon reaction are demonstrated, the efficiency of the column (van Deemter plot for different solutes) is presented. A variety of applications (aromatic hydrocarbons, halobenzenes, bioactive peptides, resveratrol from red wine) demonstrates the separation power of the new phase.     

Off‐line 2‐D RPLC/RPLC method for separation of components in Dalbergia odorifera T. Chen

An off‐line 2‐D RPLC/RPLC system incorporating a β‐CD based column and a BEH C18 column was developed in the separation of components in Dalbergia odorifera T. Chen. (Jiang Xiang). Both orthogonality and van Deemter curves of the two columns were investigated. The orthogonality was about 57%, which was evaluated with 40 standard solutes. Optimized column efficiency could be achieved under optimal linear velocity (0.04 cm/s) on the CD column or under high linear velocity (0.32 cm/s) on the BEH C18 column. With the 2‐D LC system, totally 637 peaks were separated in 114 fractions from the extraction of Jiang Xiang. Meanwhile, 19 flavanoids were tentatively identified from 114 fractions with Q‐TOF MS. The results demonstrated the separation power of this 2‐D LC system and further proved the high orthogonality between CD and C18 columns.     

Preparation,characterization and application of a new 25,27‐bis‐[2‐(5‐methylthiadiazole)thioethoxyl]‐26,28‐dihydroxy‐para‐tert‐butyl calix[4]arene stationary phase for HPLC

A new para‐tert‐butylcalix[4]arene column containing thiadiazole functional groups was prepared and used for the separation of polycyclic aromatic hydrocarbons, phenolic compounds, aromatic amines, benzoic acid and its derivatives by high‐performance liquid chromatography (HPLC). The effect of organic modifier content in the mobile phase on retention and selectivity of these compounds were investigated. The results indicate that the stationary phase behaves like reversed‐phase packing. However, hydrogen bonding, π–π and inclusion interactions seem to be involved in the separation process. The column has been successfully employed for the analysis of clenbuterol in pork and pig casing; the limit of detection and the limit of quantitation for this method by HPLC‐UV detection was 0.03 and 0.097 μg/mL, respectively; the method is demonstrated to be suitable and a competitive alternative analytical method for the determination of clenbuterol.     

(E)‐3‐(Benzo[b]thiophen‐2‐yl)‐2‐(3,4,5‐trimethoxyphenyl)acrylonitrile and (Z)‐3‐(benzo[b]thiophen‐2‐yl)‐2‐(3,4‐dimethoxyphenyl)acrylonitrile

The title compounds, C₂₀H₁₇NO₃S, (I), and C₁₉H₁₅NO₂S, (II), were prepared by the reaction of benzo[b]thiophene‐2‐carbaldehyde with (3,4,5‐trimethoxyphenyl)acetonitrile and (3,4‐dimethoxyphenyl)acetonitrile, respectively, in the presence of methanolic potassium hydroxide. In (I), the C=C bond linking the benzo[b]thiophene and the 3,4,5‐trimethoxyphenyl units has E geometry, with dihedral angles between the plane of the bridging unit and the planes of the two adjacent ring systems of 5.2 (3) and 13.1 (2)°, respectively. However, in (II), the C=C bond has Z geometry, with dihedral angles between the plane of the bridging unit and the planes of the adjacent benzo[b]thiophene and 3,4‐dimethoxyphenyl units of 4.84 (17) and 76.09 (7)°, respectively. There are no significant intermolecular hydrogen‐bonding interactions in the packing of (I) and (II). The packing is essentially stabilized via van der Waals forces.     

Photo‐polymerized lauryl methacrylate monolithic columns for CEC using lauroyl peroxide as initiator

Lauryl methacrylate (LMA)‐ester based monolithic columns photo‐polymerized using lauroyl peroxide (LPO) as initiator were prepared, and their morphological and CEC properties were studied. The composition of the polymerization mixture (i.e. ratios of monomers/porogenic solvents, 1,4‐butanediol/1‐propanol and LMA/crosslinker) was optimized. The morphological and chromatographic properties of LMA columns were evaluated by means of SEM pictures and van Deemter plots of PAHs, respectively. The polymerization mixture selected as optimal provided a fast separation of a mixture of PAHs with excellent efficiencies (minimum plate heights of 8.9–11.1 μm). Satisfactory column‐to‐column (RSD<4.5%) and batch‐to‐batch reproducibilities (RSD<6.3%) were achieved. The LMA columns photo‐polymerized with LPO were compared with those prepared with AIBN. Using PAHs, alkylbenzenes and basic compounds for testing, the columns obtained with LPO gave the best compromise between efficiency, resolution and analysis time.     

亚微米中孔SBA-15 棒状固定相在毛细管电色谱分离中的应用(英文)

采用中孔SBA-15棒状硅胶颗粒填充毛细管柱用于毛细管电色谱(CEC)分离。这一亚微米材料直径为400 nm并具有沿相同方向伸展的高度有序、均一的圆柱形中孔。棒状的特殊形态使得填充柱的通透性良好,简化了尺寸微小的CEC柱的填充过程。修饰后的棒状SBA-15填充毛细管柱成功应用于反相和离子交换电色谱分离非极性和极性样品,获得了较高柱效(140000理论塔板/m)。流速3.2cm/min时获得最低理论塔板高度为7.1 mm。范迪米特曲线说明了SBA-15孔结构的传质阻力特征。分别以芳香酸、人参、天麻提取物为样品,对亚微米固定相毛细管电色谱柱加以评价。该固定相显示出了较高的分离能力,为纳米材料在色谱固定相中的应用提供了一个新的思路。     

Purification of flavonoids from licorice using an off‐line preparative two‐dimensional normal‐phase liquid chromatography/reversed‐phase liquid chromatography method

An orthogonal (71.9%) off‐line preparative two‐dimensional normal‐phase liquid chromatography/reversed‐phase liquid chromatography method coupled with effective sample pretreatment was developed for separation and purification of flavonoids from licorice. Most of the nonflavonoids were firstly removed using a self‐made Click TE‐Cys (60 μm) solid‐phase extraction. In the first dimension, an industrial grade preparative chromatography was employed to purify the crude flavonoids. Click TE‐Cys (10 μm) was selected as the stationary phase that provided an excellent separation with high reproducibility. Ethyl acetate/ethanol was selected as the mobile phase owing to their excellent solubility for flavonoids. Flavonoids co‐eluted in the first dimension were selected for further purification using reversed‐phase liquid chromatography. Multiple compounds could be isolated from one normal‐phase fraction and some compounds with bad resolution in one‐dimensional liquid chromatography could be prepared in this two‐dimensional system owing to the orthogonal separation. Moreover, this two‐dimensional liquid chromatography method was beneficial for the preparation of relatively trace flavonoid compounds, which were enriched in the first dimension and further purified in the second dimension. Totally, 24 flavonoid compounds with high purity were obtained. The results demonstrated that the off‐line two‐dimensional liquid chromatography method was effective for the preparative separation and purification of flavonoids from licorice.     

Structural polymorphism in poly(dodecamethylen‐di‐O‐methyl‐L‐tartaramide)

Structural characterization of poly(dodecamethylen‐di‐O‐methyl‐L‐tartaramide) was carried out with optical microscopy, thermal analysis, X‐ray diffraction, and electron microscopy. Two different crystalline forms were found in accordance with the thermograms, powder and fiber X‐ray diffraction diagrams. The electron microscopy allows corroboration of the morphological and crystallographic differences. Molecular modeling was used to conclude the structural analogies and differences between the two crystalline forms that were related to the chain packing and orientation in the crystal cell, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2523–2530, 2002     

Comparison of the separation of proteins of wide-ranging molecular weight via trilobal polypropylene capillary-channeled polymer fiber,commercial superficiously porous,and commercial size exclusion columns

Reversed phase and size-exclusion chromatography methods are commonly used for protein separations, although they are based on distinctly different principles. Reversed phase methods yield hydrophobicity-based (loosely-termed) separation of proteins on porous supports, but tend to be limited to proteins with modest molecular weights based on mass transfer limitations. Alternatively, size-exclusion provides complementary benefits in the separation of higher mass proteins based on entropic, not enthalpic, processes, but tend to yield limited peak capacities. In this study, microbore columns packed with a novel trilobal polypropylene capillary-channeled polymer fiber were used in a reversed phase modality for the separation of polypeptides and proteins of molecular weights ranging from 1.4 to 660 kDa. Chromatographic parameters including gradient times, flow rates, and trifluoroacetic acid concentrations in the mobile phase were optimized to maximize resolution and throughput. Following optimization, the performance of the trilobal fiber column was compared to two commercial-sourced columns, a superficially porous C4-derivatized silica and size exclusion, both of which are sold specifically for protein separations and operated according to the manufacturer-specified conditions. In comparison to the commercial columns, the fiber-based column yielded better separation performance across the entirety of the suite, at much lower cost and shorter separation times.     

Tetra‐proline‐modified calix[4]arene‐bonded silica stationary phase for simultaneous reversed‐phase/hydrophilic interaction mixed‐mode chromatography

A new water‐soluble tetra‐proline‐modified calix[4]arene‐bonded silica stationary phase was prepared straightforwardly by an indirect method and characterized by elemental analysis, energy dispersive Spectrometry, solid‐state ¹³C NMR spectroscopy, Fourier‐transform infrared spectroscopy, and thermogravimetric analysis. Due to the simultaneous introduction of polar tetra‐proline and nonpolar calix[4]arene, the developed column possessing a double retention mode of reverse‐phase liquid chromatography and hydrophilic interaction liquid chromatography. A series of hydrophobic and hydrophilic test samples, including nucleosides and nucleotides, amines, monosubstituted benzenes, chiral compounds, and phenols, were used to evaluate the developed stationary phase. A rapid separation capability, high separation efficiency, and selectivity were achieved based on the multiple interactions between solutes and tetra‐proline‐modified calix[4]arene‐bonded silica stationary phase. Moreover, the developed stationary phase was further used to detect and separate hexamethylenetetramine in rice flour. All the results indicated the potential merits of the developed stationary phase for simultaneous separation of complex hydrophobic and hydrophilic samples with high selectivity.     

All‐in‐one solid‐phase microextraction: Development of a selective solid‐phase microextraction fiber assembly for the simultaneous and efficient extraction of analytes with different polarities

In the present work, for the first time, an all‐in‐one solid‐phase microextraction technique was developed for the simultaneous and efficient extraction of analytes within a vast polarity range. A novel fiber assembly composed of two different steel components each coated with different coatings (polydimethylsiloxane and polyethylene glycol) in terms of polarity by sol–gel technology was employed for the extraction of model compounds of different polarity in a single run followed by gas chromatography with mass spectrometry. Effective parameters in the extraction step and gas chromatography with mass spectrometry analysis were optimized for all model compounds. The detection limits of the developed method for model compounds were below 0.2 ng/L. The repeatability and reproducibility of the proposed method, explained by relative standard deviation, varied between 7.22 and 9.15% and between 7.95 and 14.90 (n = 5), respectively. Results showed that, under random conditions, compared to separate extractions performed by two other differently end‐coated components that had not been assembled as the final dual fiber, as two individual fibers; simultaneous, efficient and relatively selective extraction of all model compounds was obtained in a single run by the proposed all‐in‐one technique. Finally, the optimized procedure was applied to extraction and determination of the model compounds in spiked water samples.     

Evaluation of differences between Chiralpak IA and Chiralpak AD‐RH amylose‐based chiral stationary phases in reversed‐phase high‐performance liquid chromatography

Polysaccharide‐based chiral stationary phases can be used for the enantioselective separation of a wide range of structurally different compounds. These phases are available with chiral selectors coated or immobilized on silica gel support. The means of attachment of the chiral selector to the carrier can influence the separation performance of these stationary phases. This paper deals with evaluation of differences in the separation abilities of coated Chiralpak AD‐RH versus immobilized Chiralpak IA amylose‐based stationary phases in the reversed–phase mode of high–performance liquid chromatography. A set of chiral analytes was separated under acidic and basic conditions. Differences were observed in the enantioseparation potential of the tested phases. The linear‐free energy relationship and additional evaluation of ionic interactions were used to ascertain whether the interactions that participate in retention and enantioseparation are affected by the means of preparation of these phases. All the interactions covered by the linear‐free energy relationship were significant for the studied phases and their absolute values were almost always higher for the coated phase. Ionic interactions were found to be more important on the immobilized stationary phase but did not contribute to any improvement in the enantioselective separation performance.     

Structural modifications of dicationic acetylcholinesterase reactivators studied under ion‐pairing mechanism in reversed‐phase liquid chromatography

A study focused on the chromatographic behavior of several acetylcholinesterase reactivators under ion‐pairing mechanism is reported. Among these reactivators, dicationic oximes and carbamoyl‐based pyridinium congeners were studied, which form ion pairs with alkylsulfonate anions. This mechanism was studied for some major experimental parameters, such as the chain length of the ion‐pairing agent added to the aqueous phase, its concentration, temperature, and nature of the organic modifier from mobile phase. Retention data showed one or two possibilities of forming ion pairs and the tautomerism of the studied reactivators, for different pH values of the aqueous component. Double sigmoid shapes were obtained for the studied compounds for the dependence between retention factor and pH, indicating the possibility of one or two tautomeric equilibria: at pH close to 7 these compounds are not stable as dicationic species and they participate in the retention process as nitroso forms, which are not able to form ion pairs with alkylsulfonates. The dependences of the retention factor on the organic modifier content from mobile phase were linear. Two complementary theoretical models were used to explain the functional dependences for the retention data on the experimental parameters.     

Effect of the carrier gas pressure on the dynamic and separation characteristics of divinylbenzene-based monolithic capillary columns for gas chromatography

The efficiency and dynamic characteristics of divinylbenzene-based monolithic capillary columns for gas chromatography were analyzed using a test mixture composed of five light hydrocarbons. The chromatographic properties of these columns were evaluated within the framework of two varieties of the van Deemter equation, the classical one and that proposed by Giddings (with consideration given to the pressure drop across the column). An analysis of the van Deemter curves demonstrated that the main contribution to peak smearing comes from the diffusion processes in the mobile phase. The contribution from the resistance to mass transfer between the mobile and stationary phases is less important. Negative values obtained for A in the van Deemter equation and for C _s in the Giddings model, parameters that characterize the stationary phase structure and mass transfer kinetics in the stationary phase, have no physical meaning, a result calling for further studies of this type of monolithic capillary columns since the classical theory supposed these parameters to be strictly positive. Under optimal conditions, the HETP of the monolithic columns was found to be 3 to 4 times smaller than that typical of open capillary columns of the same diameter.     

Donor‐Stabilized 1,3‐Disila‐2,4‐diazacyclobutadiene with a Nonbonded Si⋅⋅⋅Si Distance Compressed to a Si=Si Double Bond Length

A donor‐stabilized 1,3‐disila‐2,4‐diazacyclobutadiene presents an exceptionally short nonbonded Si???Si distance (2.23 Å), which is as short as that of Si=Si bonds (2.15–2.23 Å). Theoretical investigations indicate that there is no bond between the two silicon atoms, and that the unusual geometry can be related to a significant coulomb repulsion between the two ring nitrogen atoms. This chemical pressure phenomenon could provide an alternative and superior way of squeezing out van der Waals space in highly strained structures, as compared to the classical physical methods.     

Base‐deactivated and alkaline‐resistant chromatographic stationary phase based on functionalized polymethylsilsesquioxane microspheres

Vinyl, chloropropyl, and mercaptopropyl functionalized particles were prepared by a two‐step acidic/alkaline catalyzed co‐hydrolysis/condensation of methyltrimethoxysilane with a different silane precursor that carries chemically reactive functional group including vinyl, chloropropyl, and mercaptopropyl, respectively. The morphology, pore structure, and functional groups of the synthesized packings were studied by SEM, nitrogen adsorption‐desorption measurements, and solid‐state ¹³C ²⁹Si NMR spectroscopy, respectively. The particles show ordered sphere, narrow particle size distribution, and mesoporous structure. The carbon contents of the microspheres are in the range of 17–19%, comparable to those of octadecyl‐bonded silica packings. The three‐kind of microspheres were directly used as packing materials for high‐performance liquid chromatography without size classification. The chromatographic performance of the columns was evaluated and compared with a commercially available C₁₈ phase. The results revealed that these columns possess typical reversed‐phase chromatographic properties with increased hydrophobicity than polymethylsilsesquioxane and symmetric peaks for basic compounds. They were applied to the simultaneous separation of combination bendazol hydrochlorothiazide capsules containing polar and basic drugs with peaks identified by tandem with mass spectrometry. In general, a novel method is provided for the synthesis of different methyltrimethoxysilane‐derived microspheres for high‐performance liquid chromatography, which are advantageous for separating basic compounds.