3,4,9,10‐Perylenetetracarboxylic Acid/Hemin Nanocomposites Act as Redox Probes and Electrocatalysts for Constructing a Pseudobienzyme‐Channeling Amplified Electrochemical Aptasensor

A simple wet‐chemical strategy for the synthesis of 3,4,9,10‐perylenetetracarboxylic acid (PTCA)/hemin nanocomposites through π–π interactions is demonstrated. Significantly, the hemin successfully conciliates PTCA redox activity with a pair of well‐defined redox peaks and intrinsic peroxidase‐like activity, which provides potential application of the PTCA self‐derived redox activity as redox probes. Additionally, PTCA/hemin nanocomposites exhibit a good membrane‐forming property, which not only avoids the conventional fussy process for redox probe immobilization, but also reduces the participation of the membrane materials that act as a barrier of electron transfer. On the basis of these unique properties, a pseudobienzyme‐channeling amplified electrochemical aptasensor is developed that is coupled with glucose oxidase (GOx) for thrombin detection by using PTCA/hemin nanocomposites as redox probes and electrocatalysts. With the addition of glucose to the electrolytic cell, the GOx on the aptasensor surface bioelectrocatalyzed the reduction of glucose to produce H₂O₂, which in turn was electrocatalyzed by the PTCA/hemin nanocomposites. Cascade schemes, in which an enzyme is catalytically linked to another enzyme, can produce signal amplification and therefore increase the biosensor sensitivity. As a result, a linear relationship for thrombin from 0.005 to 20 nM and a detection limit of 0.001 nM were obtained.     

A Label‐Free Electrochemical Aptasensor for Thrombin Using a Single‐Wall Carbon Nanotube (SWCNT) Casted Glassy Carbon Electrode (GCE)

An electrochemical aptasensor with a thrombin binding aptamer (TBA) was developed using a single‐wall carbon nanotube (SWCNT) casted GCE. The TBA was immobilized on SWCNTs through π‐stacking without any special modification, resulting in helical wrapping to the surface. In the presence of thrombin, the TBA binds with thrombin and the TBA concentration on the SWCNT surface decreases. The remaining amount of TBA can be analyzed by an electrochemical method without any label, because the guanine bases of the nucleic acid are measurable by electrochemical methods. The electrochemical oxidation of guanine nucleotides was enhanced by electrocatalytic mediation using Ru(bpy)₃²⁺ for higher sensitivity and reduction of the overpotential for electrochemical detection.     

Studies on the Affinity‐based Biosensors for Electrochemical Detection of HER2 Cancer Biomarker

As cancer diseases are the second main cause of death it is necessary to elaborate fast and efficient early diagnosis methods for their detection. One of the possibilities is the analysis of protein biomarkers, which abnormal concentration in physiological fluids might be an indication of cancer disease progression. Herein, we present the studies on the development of affinity‐based biosensors for electrochemical detection of HER2 protein, which is a common biomarker of breast cancer. The main objective was to verify the possibility of fabrication of HER2‐specific hybrid aptamer‐polyclonal antibody and antibody‐based sandwich sensing layer on gold electrode surface. The effectiveness of each electrode modification step was confirmed using voltammetric and impedimetric techniques in the presence of ferri/ferrocyanide redox couple. It was observed that hybrid construct was unlikely to be formed on the gold electrode due to a higher affinity of secondary polyclonal antibody towards target protein, which resulted in the separation of HER2‐antibody complex from the electrode surface. On the contrary, an antibody‐based sandwich receptor layer allowed for protein discrimination in the range from 1 to 100 ng mL^?1 by the application of TMB/H₂O₂ system and chronoamperometry detection technique. Though, the occurrence of interactions between interfering proteins and antibody‐based layer was noted, it led to at least two times smaller current responses than for HER2 protein.     

Label‐Free and Ultra‐Low Level Detection of Salmonella enterica Serovar Typhimurium Using Electrochemical Impedance Spectroscopy

An immunosensor for rapid and low level detection of the bacterial pathogen Salmonella enterica Serovar Typhimurium was designed and developed based upon label‐free electrochemical impedance spectroscopy and correlated to viable cell counts. The immunosensor was fabricated by electroplating gold onto a disposable printed circuit board (PCB) electrode by immobilizing monoclonal antibody (MAb) specific against Salmonella typhimurium cell surface lipopolysaccharide (LPS) onto the surface of the electrode. Use of mass‐fabricated and electroplated PCB electrodes allowed for disposable, highly sensitive, and rapid detection of Salmonella in an aqueous environment. Results demonstrate that in purified solution, Salmonella can be detected as low as 10 CFU in a 100 μL volume and label‐free and rapid manner in fewer than 90 s. The cost effective approach described here can be used for detection of pathogens with relevance for healthcare, food, and environmental applications.     

BisPNA‐assisted Detection of Double‐stranded DNA via Electrochemical Impedance Spectroscopy

A highly effective strategy for quantification of plasmid which was a special dsDNA based on bisPNA by electrochemical impedance spectroscopy was presented in this work. Firstly, through Au?S bond, thiol‐terminated bisPNA probes were immobilized onto the gold electrode surface. Then bisPNA probes directly hybridized with target plasmid DNA pBR322 based on the PNA.DNA‐PNA invasion triplex without denaturation. In the presence of redox electroactive ions [Fe(CN)₆]^3?/4? as hybridization indicator, the charge transfer resistance (R_ct) was produced, and R_ct was measured via electrochemical impedance spectroscopy. Under optimal conditions, this strategy showed a good linear relationship between the ΔR_ct which was the difference of R_ct obtained before and after bisPNA hybridized with plasmid pBR322, and logarithm of the concentration of plasmid pBR322 within the range from 1 nM to 100 nM (R²=0.993), with a limit of detection (LOD) of 0.1 nM. Furthermore, this bisPNA‐assisted biosensor showed good stability and satisfactory analytical reliability. In addition, this novel bisPNA‐assisted biosensor also exhibited excellent analytical results in human serum.     

An Impedimetric Aptasensor Based on a Novel Line‐Pad‐Line Electrode for the Determination of VEGF165

In this work, a novel, simple and label‐free line‐pad‐line electrode (LPLE) biosensor was developed for detection of vascular endothelial growth factor (VEGF₁₆₅). DNA aptamer was used as a recognition element for high specificity to VEGF₁₆₅, and original LPLE as the substrate electrode for high sensitivity of the biosensor. This sensor was prepared by immobilizing anti‐VEGF₁₆₅ aptamers on the LPLE surface through gold‐sulfur (Au?S) bonding. Upon the addition of VEGF₁₆₅, a large target‐induced conformational change in the surface‐immobilized aptamer was generated and caused variations in the interfacial properties,which led to a corresponding increase in the impedance magnitude of the LPLE. Finally, our results demonstrate that the calibration curve for VEGF₁₆₅determination was linear over the range of 0.026‐31.4 fM with a detection limit as low as 0.017 fM.Additionally, our sensor was fabricated on printed circuit board (PCB) with a new electrode construction, and can potentially be implemented with the advantages of simplicity, low‐cost and easy mass production. Besides, considering its desirable sensitivity and specificity, the proposed use of LPLE provided a promising strategy for a wide variety of sensing applications.     

G‐Quadruplex‐Based DNAzymes Aptasensor for the Amplified Electrochemical Detection of Thrombin

A novel G‐quadruplex‐based DNAzymes aptasensor for the amplified electrochemical detection of thrombin has been described. The aptasensor utilized a combination of hemin and guanine‐rich thrombin‐binding aptamer (TBA) to form horseradish peroxidase (HRP)‐mimicking DNAzymes with peroxidase catalytic activity. In the presence of thrombin, the enzyme activity could be extensively promoted, thereby providing the amplified electrochemical readout signals for detecting thrombin. This aptasensor exhibited high sensitivity and selectivity for thrombin determination, which enabled the analysis of thrombin with a detection limit of 6×10^–11 M. On the basis of results, this method could have broad applications in the detection of proteins and other biomolecules.     

An Electrochemical Aptasensor for Detection of Thrombin based on Target Protein‐induced Strand Displacement

A sensitive electrochemical aptasensor for detection of thrombin based on target protein‐induced strand displacement is presented. For this proposed aptasensor, dsDNA which was prepared by the hybridization reaction of the immobilized probe ssDNA (IP) containing thiol group and thrombin aptamer base sequence was initially immobilized on the Au electrode by self‐assembling via Au? S bind, and a single DNA labeled with CdS nanoparticles (DP‐CdS) was used as a detection probe. When the so prepared dsDNA modified Au electrode was immersed into a solution containing target protein and DP‐CdS, the aptamer in the dsDNA preferred to form G‐quarter structure with the present target protein resulting that the dsDNA sequence released one single strand and returned to IP strand which consequently hybridized with DP‐CdS. After dissolving the captured CdS particles from the electrode, a mercury‐film electrode was used for electrochemical detection of these Cd²⁺ ions which offered sensitive electrochemical signal transduction. The peak current of Cd²⁺ ions had a good linear relationship with the thrombin concentration in the range of 2.3×10^?9–2.3×10^?12 mol/L and the detection limit was 4.3×10^?13 mol/L of thrombin. The detection was also specific for thrombin without being affected by the coexistence of other proteins, such as BSA and lysozyme.     

Understanding Complex Electrochemical Impedance Spectroscopy in Corrosion Systems Using in‐situ Synchrotron Radiation Grazing Incidence X‐ray Diffraction

The difficulty in interpreting electrochemical impedance spectroscopy (EIS) data has limited the potential of the method despite its utility as an electrochemical method for studies of electrode reactions and interfacial structures. Taking the test case of the carbon dioxide corrosion of carbon steel, in‐situ synchrotron radiation grazing incidence X‐ray diffraction (SR‐GIXRD) has been demonstrated to be a powerful technique for validating and understanding the interfacial structures associated with complex EIS data. Carbon dioxide corrosion was found to occur in several steps, which may only be surmised by EIS, but the use of SR‐GIXRD in conjunction with EIS has enabled the establishment of a link between EIS time constants and structural changes associated with the evolution of corrosion products with time. By comparison to previous studies by the authors and others in this field, this communication provides the first direct experimental evidence linking SR‐GIXRD surface compositional data to otherwise indistinctive EIS time constants.     

Fluorescence Polarization Based Nucleic Acid Testing for Rapid and Cost‐Effective Diagnosis of Infectious Disease

A new nucleic acid detection method was developed for a rapid and cost‐effective diagnosis of infectious disease. This approach relies on the three unique elements: 1) detection probes that regulate DNA polymerase activity in response to the complementary target DNA; 2) universal reporters conjugated with a single fluorophore; and 3) fluorescence polarization (FP) detection. As a proof‐of‐concept, the assay was used to detect and sub‐type Salmonella bacteria with sensitivities down to a single bacterium in less than three hours.     

Catalytic Hairpin Assembly‐Programmed DNA Three‐Way Junction for Enzyme‐Free and Amplified Electrochemical Detection of Target DNA

DNA three‐way junctions (DNA 3WJ) have been widely used as important building blocks for the construction of DNA architectures and dynamic assemblies. Herein, we describe for the first time a catalytic hairpin assembly‐programmed DNA three‐way junction (CHA‐3WJ) strategy for the enzyme‐free and amplified electrochemical detection of target DNA. It takes full advantage of the target‐catalyzed hairpin assembly‐induced proximity effect of toehold and branch‐migration domains for the ingenious execution of the strand displacement reaction to form the DNA 3WJ on the electrode surface. A low detection limit of 0.5 pM with an excellent selectivity was achieved for target DNA detection. The developed CHA‐3WJ strategy also offers distinct advantages of simplicity in probe design and biosensor fabrication, as well as enzyme‐free operation. Thus, it opens a promising avenue for applications in bioanalysis, design of DNA‐responsive devices, and dynamic DNA assemblies.     

Label‐Free Electrochemical Aptasensor for Determination of Chloramphenicol Based on Gold Nanocubes‐Modified Screen‐Printed Gold Electrode

An ultrasensitive label‐free electrochemical aptasensor was developed for selective detection of chloramphenicol (CAP). The aptasensor was made using screen‐printed gold electrode modified with synthesized gold nanocube/cysteine. The interactions of CAP with aptamer were studied by cyclic voltammetry, square wave voltammetry (SWV) and electrochemical impedance spectroscopy. Under optimized conditions, two linear calibration curves were obtained for CAP determination using SWV technique, from 0.03 to 0.10 µM and 0.25–6.0 µM with a detection limit of 4.0 nM. The aptasensor has the advantages of good selectivity and stability and applied to the determination of CAP in human blood serum sample.     

Aptamer‐Based SERS Assay of ATP and Lysozyme by Using Primer Self‐Generation

A simple bifunctional surface‐enhanced Raman scattering (SERS) assay based on primer self‐generation strand‐displacement polymerization (PS‐SDP) is developed to detect small molecules or proteins in parallel. Triphosphate (ATP) and lysozyme are used as the models of small molecules and proteins. Compared to traditional bifunctional methods, the method possesses some remarkable features as follows: 1) by virtue of the simple PS‐SDP reaction, a bifunctional aptamer assembly binding of trigger 1 and trigger 2 was used as a functional structure for the simultaneous sensing of ATP or lysozyme. 2) The concept of isothermal amplification bifunctional detection has been first introduced into SERS biosensing applications as a signal‐amplification tool. 3) The problem of high background induced by excess bio‐barcodes is circumvented by using magnetic beads (MBs) as the carrier of signal‐output products and massive of hairpin DNA binding with SERS active bio‐barcodes relied on Au nanoparticles (Au NPs), SERS signal is significantly enhanced. Overall, with multiple amplification steps and one magnetic‐separation procedure, this flexible biosensing system exhibited not only high sensitivity and specificity, with the detection limits of ATP and lysozyme of 0.05 nM and 10 fM , respectively.     

Development of a Dual‐Functional Hydrogel Using RGD and Anti‐VEGF Aptamer

Synthetic molecular libraries hold great potential to advance the biomaterial development. However, little effort is made to integrate molecules with molecular recognition abilities selected from different libraries into a single biomolecular material. The purpose of this work is to incorporate peptides and nucleic acid aptamers into a porous hydrogel to develop a dual‐functional biomaterial. The data show that an anti‐integrin peptide can promote the attachment and growth of endothelial cells in a 3D porous poly(ethylene glycol) hydrogel and an antivascular endothelial growth factor aptamer can sequester and release VEGF of high bioactivity. Importantly, the dual‐functional porous hydrogel enhances the growth and survival of endothelial cells. This work demonstrates that molecules selected from different synthetic libraries can be integrated into one system for the development of novel biomaterials.     

Voltammetry of Undiluted Red‐Ox Systems. Electrochemical ESR‐ and Electrochemical Impedance Spectroscopy Evidence for Formation of Ionic Liquid at Microelectrode Surface

It is believed that voltammetry of undiluted red‐ox liquids can lead to the formation of stable thin layers of ionic liquids at the microelectrode surface. Such situation was postulated for several liquids (solvents), however, so far no hard evidence supporting this expectation was obtained. By using electron spin resonance in combination with voltammetric experiments and electrochemical impedance spectroscopy we have shown that the concentration of the cation radicals at the microelectrode surface may be high (nitrobenzene) and the overall resistance of the solution abruptly drops (methanol) when the potential at the microelectrode corresponds to the wave plateau of the undiluted organic liquid. Both facts constitute a good evidence for the formation of microlayers of ionic liquids at the microelectrode surface during electrolysis of undiluted red‐ox systems.     

Plasmonic‐Based Electrochemical Impedance Imaging of Electrical Activities in Single Cells

Studying electrical activities in cells, such as action potential and its propagation in neurons, requires a sensitive and non‐invasive analytical tool that can image local electrical signals with high spatial and temporal resolutions. Here we report a plasmonic‐based electrochemical impedance imaging technique to study transient electrical activities in single cells. The technique is based on the conversion of the electrical signal into a plasmonic signal, which is imaged optically without labels. We demonstrate imaging of the fast initiation and propagation of action potential within single neurons, and validate the imaging technique with the traditional patch clamp technique. We anticipate that the plasmonic imaging technique will contribute to the study of electrical activities in various cellular processes.     

A Sandwich‐Type Electrochemical Biosensor for Detection of BCR/ABL Fusion Gene Using Locked Nucleic Acids on Gold Electrode

In this study, a sandwich‐type electrochemical enzyme‐based LNA‐modified DNA biosensor was developed to detect relative gene in chronic Myelogenous Leukemia first. This biosensor is based on a ‘sandwich’ detection strategy, which involves a pair of probes (a capture probe immobilized at the electrode surface and a reporter probe labeled biotin as an affinity tag for avidin‐HRP) modified LNA. Since biotin can be connected with avidin‐HRP, this biosensor offers an enzymatically amplified electrochemical current signal for the detection of target DNA. This new pattern exhibits high sensitivity and selectivity, and this biosensor has been used for an assay of PCR real sample with satisfactory result.     

Low‐Background,Highly Sensitive DNA Biosensor by Using an Electrically Neutral Cobalt(II) Complex as the Redox Hybridization Indicator

An electrically neutral cobalt complex, [Co(GA)₂(phen)] (GA=glycollic acid, phen=1,10‐phenathroline), was synthesized and its interactions with double‐stranded DNA (dsDNA) were studied by using electrochemical methods on a glassy carbon electrode (GCE). We found that [Co(GA)₂(phen)] could intercalate into the DNA duplex through the planar phen ligand with a high binding constant of 6.2(±0.2)×10⁵ M ^?1. Surface studies showed that the cobalt complex could electrochemically accumulate within the modified dsDNA layer, rather than within the single‐stranded DNA (ssDNA) layer. Based on this feature, the complex was applied as a redox‐active hybridization indicator to detect 18‐base oligonucleotides from the CaMV35S promoter gene. This biosensor presented a very low background signal during hybridization detection and could realize the detection over a wide kinetic range from 1.0×10^?14 M to 1.0×10^?8 M , with a low detection limit of 2.0 fM towards the target sequences. The hybridization selectivity experiments further revealed that the complementary sequence, the one‐base‐mismatched sequence, and the non‐complementary sequence could be well‐distinguished by the cobalt‐complex‐based biosensor.