In Situ Synthesis of 3D Flower‐Like Nanocrystalline Ni/C and its Effect on Hydrogen Storage Properties of LiAlH4

Lithium alanate (LiAlH₄) is of particular interest as one of the most promising candidates for solid‐state hydrogen storage. Unfortunately, high dehydrogenation temperatures and relatively slow kinetics limit its practical applications. Herein, 3D flower‐like nanocrystalline Ni/C, composed of highly dispersed Ni nanoparticles and interlaced carbon flakes, was synthesized in situ. The as‐synthesized nanocrystalline Ni/C significantly decreased the dehydrogenation temperature and dramatically improved the dehydrogenation kinetics of LiAlH₄. It was found that the LiAlH₄ sample with 10 wt % Ni/C (LiAlH₄‐10 wt %Ni/C) began hydrogen desorption at approximately 48 °C, which is very close to ambient temperature. Approximately 6.3 wt % H₂ was released from LiAlH₄‐10 wt %Ni/C within 60 min at 140 °C, whereas pristine LiAlH₄ only released 0.52 wt % H₂ under identical conditions. More importantly, the dehydrogenated products can partially rehydrogenate at 300 °C under 4 MPa H₂. The synergetic effect of the flower‐like carbon substrate and Ni active species contributes to the significantly reduced dehydrogenation temperatures and improved kinetics.     

Magnetic N‐Enriched Fe3C/Graphitic Carbon instead of Pt as an Electrocatalyst for the Oxygen Reduction Reaction

A series of Fe₃C/C‐N_x nanoparticles (NPs) with different nitrogen content are prepared by a simple one‐pot route. In the synthetic procedure, aniline and acetonitrile are simultaneously used as the carbon and nitrogen source. The effect of calcination temperature on the structural and functional properties of the materials is investigated. Magnetic measurement shows that the sample prepared at 800 °C (Fe₃C/C‐N₈₀₀ NPs) possesses the highest M_s value of 77.2 emu g^?1. On testing as oxygen reduction reaction (ORR) catalysts, the sample prepared at 750 °C (Fe₃C/C‐N₇₅₀ NPs) shows the best ORR performance among the series, with a more positive onset potential (+0.99 V vs. RHE), higher selectivity (number of electron transfer n≈3.93), longer durability, and stronger tolerance against methanol crossover than commercial Pt/C catalysts in a 0.1 m KOH solution. Moreover, in acidic solution, the excellent ORR activity and stability are also exhibited.     

Pd@Pt Core–Shell Nanoparticles with Branched Dandelion‐like Morphology as Highly Efficient Catalysts for Olefin Reduction

A facile synthesis based on the addition of ascorbic acid to a mixture of Na₂PdCl₄, K₂PtCl₆, and Pluronic P123 results in highly branched core–shell nanoparticles (NPs) with a micro–mesoporous dandelion‐like morphology comprising Pd core and Pt shell. The slow reduction kinetics associated with the use of ascorbic acid as a weak reductant and suitable Pd/Pt atomic ratio (1:1) play a principal role in the formation mechanism of such branched Pd@Pt core–shell NPs, which differs from the traditional seed‐mediated growth. The catalyst efficiently achieves the reduction of a variety of olefins in good to excellent yields. Importantly, higher catalytic efficiency of dandelion‐like Pd@Pt core–shell NPs was observed for the olefin reduction than commercially available Pt black, Pd NPs, and physically admixed Pt black and Pd NPs. This superior catalytic behavior is not only due to larger surface area and synergistic effects but also to the unique micro–mesoporous structure with significant contribution of mesopores with sizes of several tens of nanometers.     

Preparation and Characterization of Pt/Co‐Core Au‐Shell Magnetic Nanoparticles

Pt/Co‐core Au‐shell nanoparticles were synthesized via a two‐step route using NaBH₄ as a reducing agent. The nanoparticles are characterized by UV‐vis spectroscopy, transmission electron microscopy (TEM) and powder X‐ray diffraction (XRD). The results indicate that the as‐synthesized Pt/Co‐core Au‐shell nanoparticles have a disordered face centered cubic (fcc) structure, whereas the annealed Pt/Co‐core Au‐shell nanoparticles exhibit an ordered face centered tetragonal (fct) structure. Superconducting quantum interference device (SQUID) studies reveal that the coercivity of the annealed Pt/Co‐core Au‐shell nanoparticles increases to 510 Oe after heat treatment at 500 °C for 2 h.     

应用于氧还原反应的石墨烯-无定形碳核壳结构复合材料载铂催化剂(英文)

采用氯化法制备石墨烯-无定型碳复合材料(GNS@a-C),并用作质子交换膜燃料电池(PEMFC)氧还原反应Pt催化剂的载体.结果显示,所制Pt/GNS@a-C催化剂与传统商业催化剂Pt/C相比,有较好的活性和较高的稳定性:质量活性(0.121 A/mg)几乎是Pt/C(0.064 A/mg)的两倍.更重要的是,该新型催化剂加速4000圈后其电化学活性面积保留了最初的51%,与Pt/C的33%相比,前者有更好的电化学稳定性,显示它在PEMFC中将具有较好的应用潜力.     

High-temperature stable, iron-based core-shell catalysts for ammonia decomposition

High‐temperature, stable core–shell catalysts for ammonia decomposition have been synthesized. The highly active catalysts, which were found to be also excellent model systems for fundamental studies, are based on α‐Fe₂O₃ nanoparticles coated by porous silica shells. In a bottom‐up approach, hematite nanoparticles were firstly obtained from the hydrothermal reaction of ferric chlorides, L ‐lysine, and water with adjustable average sizes of 35, 47, and 75 nm. Secondly, particles of each size could be coated by a porous silica shell by means of the base‐catalyzed hydrolysis of tetraethylorthosilicate (TEOS) with cetyltetramethylammonium bromide (CTABr) as porogen. After calcination, TEM, high‐resolution scanning electron microscopy (HR‐SEM), energy‐dispersive X‐ray (EDX), XRD, and nitrogen sorption studies confirmed the successful encapsulation of hematite nanoparticles inside porous silica shells with a thickness of 20 nm, thereby leading to composites with surface areas of approximately 380 m² g^?1 and iron contents between 10.5 and 12.2 wt %. The obtained catalysts were tested in ammonia decomposition. The influence of temperature, iron oxide core size, possible diffusion limitations, and dilution effects of the reagent gas stream with noble gases were studied. The catalysts are highly stable at 750 °C with a space velocity of 120 000 cm³ g_cat^?1 h^?1 and maintained conversions of around 80 % for the testing period time of 33 h. On the basis of the excellent stability under reaction conditions up to 800 °C, the system was investigated by in situ XRD, in which body‐centered iron was determined, in addition to FeN_x, as the crystalline phase under reaction conditions above 650 °C.     

Properties of Bulk In-Pt Intermetallic Compounds in Methanol Steam Reforming

Heterogeneous catalysts are often complex materials containing different compounds. While this can lead to highly beneficial interfaces, it is difficult to identify the role of single components. In methanol steam reforming (MSR), the interplay between intermetallic compounds, supporting oxides and redox reactions leads to highly active and CO₂-selective materials. Herein, the intrinsic catalytic properties of unsupported In₃Pt₂, In₂Pt, and In₇Pt₃ as model systems for Pt/In₂O₃-based catalytic materials in MSR are addressed. In₂Pt was identified as the essential compound responsible for the reported excellent CO₂-selectivity of 99.5 % at 300 °C in supported systems, showing a CO₂-selectivity above 99 % even at 400 °C. Additionally, the partial oxidation of In₇Pt₃ revealed that too much In₂O₃ is detrimental for the catalytic properties. The study highlights the crucial role of intermetallic In−Pt compounds in Pt/In₂O₃ materials with excellent CO₂-selectivity.     

Technical electrodes catalyzed with PtRu on mesoporous ordered carbons for liquid direct methanol fuel cells

This paper presents the behavior of ordered mesoporous carbon (OMC)-supported catalysts as anodes for direct methanol fuel cells (DMFC), fed with an aqueous methanol solution. OMC samples were prepared by the nanocasting method from a polymerized furan resin using mesoporous silica as a template. Pt and PtRu nanoparticles were supported on OMC with high dispersion, the particle size being 2.4 nm at PtRu loading of 15 wt.%. The resulting catalysts were analyzed using carbon monoxide stripping voltammetry, cyclic voltammetry, and chronoamperometry in three-electrode experiments and recording cell voltage vs. current density curves in practical DMFC. It was found that PtRu-catalyzed technical electrodes exhibited good activity towards methanol electrooxidation in half-cell experiments under fuel-cell-relevant conditions. Specifically, Pt₈₅Ru₁₅/OMC catalyst showed the highest catalytic enhancement compared to Pt/OMC for the steady-state electrooxidation of methanol at 60 °C and 0.5 V, by a factor of 22 in 2-M MeOH solution. DMFC single cells yielded an open-circuit voltage of 0.625 V at 60 °C. Polarization curves indicate that DMFC with OMC-supported Pt₈₅Ru₁₅ catalyst at the anode exhibited the best performance.     

Bottom‐Up Fabrication of a Sandwich‐Like Carbon/Graphene Heterostructure with Built‐In FeNC Dopants as Non‐Noble Electrocatalyst for Oxygen Reduction Reaction

High‐performance non‐noble electrocatalysts for oxygen reduction reaction (ORR) are the prerequisite for large‐scale utilization of fuel cells. Herein, a type of sandwiched‐like non‐noble electrocatalyst with highly dispersed FeN_x active sites embedded in a hierarchically porous carbon/graphene heterostructure was fabricated using a bottom‐up strategy. The in situ ion substitution of Fe³⁺ in a nitrogen‐containing MOF (ZIF‐8) allows the Fe‐heteroatoms to be uniformly distributed in the MOF precursor, and the assembly of Fe‐doped ZIF‐8 nano‐crystals with graphene‐oxide and in situ reduction of graphene‐oxide afford a sandwiched‐like Fe‐doped ZIF‐8/graphene heterostructure. This type of heterostructure enables simultaneous optimization of FeN_x active sites, architecture and interface properties for obtaining an electron‐catalyst after a one‐step carbonization. The synergistic effect of these factors render the resulting catalysts with excellent ORR activities. The half‐wave potential of 0.88 V vs. RHE outperforms most of the none‐noble metal catalyst and is comparable with the commercial Pt/C (20 wt %) catalyst. Apart from the high activity, this catalyst exhibits excellent durability and good methanol‐tolerance. Detailed investigations demonstrate that a moderate content of Fe dopants can effectively increase the intrinsic activities, and the hybridization of graphene can enhance the reaction kinetics of ORR. The strategy proposed in this work gives an inspiration towards developing efficient noble‐metal‐free electrocatalysts for ORR.     

Oxygen reduction reaction activity of monodispersed Pt nanoparticles-loaded carbon black catalyst prepared with a Pt carbonyl cluster anion

Pt nanoparticles-loaded carbon black (CB) was prepared from Pt carbonyl cluster complexes, and had much narrower size distribution than commercial Pt nanoparticles/CB. In the former the monodispersed Pt nanoparticles were highly dispersed on CB without aggregation even at high Pt loading of 80 wt.%. Hydrodynamic voltammograms in O₂-saturated 0.05 M H₂SO₄ solution at 30 °C showed that the onset potential of oxygen reduction reaction (ORR) current for the monodispersed Pt nanoparticles/CB electrode was more positive than that for a polycrystalline Pt electrode and similar to that for the commercial Pt nanoparticles/CB electrode. Moreover, the mass activity for ORR for the monodispersed Pt nanoparticles/CB electrode was ca. 4.9 times higher than that for the commercial Pt nanoparticles/CB electrode, clearly indicating that the control of size distribution of Pt nanoparticles is meaningful for reducing the Pt consumption.     

No More HF: Teflon‐Assisted Ultrafast Removal of Silica to Generate High‐Surface‐Area Mesostructured Carbon for Enhanced CO2 Capture and Supercapacitor Performance

An innovative technique to obtain high‐surface‐area mesostructured carbon (2545 m² g^?1) with significant microporosity uses Teflon as the silica template removal agent. This method not only shortens synthesis time by combining silica removal and carbonization in a single step, but also assists in ultrafast removal of the template (in 10 min) with complete elimination of toxic HF usage. The obtained carbon material (JNC‐1) displays excellent CO₂ capture ability (ca. 26.2 wt % at 0 °C under 0.88 bar CO₂ pressure), which is twice that of CMK‐3 obtained by the HF etching method (13.0 wt %). JNC‐1 demonstrated higher H₂ adsorption capacity (2.8 wt %) compared to CMK‐3 (1.2 wt %) at ?196 °C under 1.0 bar H₂ pressure. The bimodal pore architecture of JNC‐1 led to superior supercapacitor performance, with a specific capacitance of 292 F g^?1 and 182 F g^?1 at a drain rate of 1 A g^?1 and 50 A g^?1, respectively, in 1 m H₂SO₄ compared to CMK‐3 and activated carbon.     

Porous Ni@Pt Core‐Shell Nanotube Array Electrocatalyst with High Activity and Stability for Methanol Oxidation

Bimetallic core‐shell nanostructures are emerging as more important materials than monometallic nanostructures, and have much more interesting potential applications in various fields, including catalysis and electronics. In this work, we demonstrate the facile synthesis of core‐shell nanotube array catalysts consisting of Pt thin layers as the shells and Ni nanotubes as the cores. The porous Ni@Pt core‐shell nanotube arrays were fabricated by ZnO nanorod‐array template‐assisted electrodeposition, and they represent a new class of nanostructures with a high electrochemically active surface area of 50.08 m² (g Pt)^?1, which is close to the value of 59.44 m² (g Pt)^?1 for commercial Pt/C catalysts. The porous Ni@Pt core‐shell nanotube arrays also show markedly enhanced electrocatalytic activity and stability for methanol oxidation compared with the commercial Pt/C catalysts. The attractive performances exhibited by these prepared porous Ni@Pt core‐shell nanotube arrays make them promising candidates as future high‐performance catalysts for methanol electrooxidation. The facile method described herein is suitable for large‐scale, low‐cost production, and significantly lowers the Pt loading, and thus, the cost of the catalysts.     

Nitrogen‐Doped Graphitic Porous Carbon Nanosheets Derived from In Situ Formed g‐C3N4 Templates for the Oxygen Reduction Reaction

Heteroatom‐doped carbon materials have been considered as potential substitutes for Pt‐based electrocatalysts for the oxygen reduction reaction (ORR) in alkaline fuel cells. Here we report the synthesis of oxygen‐containing nitrogen‐doped carbon (ONC) nanosheets through the carbonization of a mixture that contained glucose and dicyandiamide (DCDA). In situ formed graphitic carbon nitride (g‐C₃N₄) derived from DCDA provided a nitrogen‐rich template, thereby facilitating the formation of ONC nanosheets. The resultant ONC materials with high nitrogen content, high specific surface areas, and highly mesoporous total volume displayed excellent electrochemical performance, including a similar ORR onset potential, half‐potential, a higher diffusion‐limited current, and excellent tolerance to methanol than that of the commercial Pt/C catalyst, respectively. Moreover, the ONC‐850 nanosheet displayed high long‐term durability even after 1000 cycles as well as a high electron transfer number of 3.92 (4.0 for Pt/C). Additionally, this work provides deeper insight into these materials and a versatile strategy for the synthesis of cost‐effective 2D N‐doped carbon electrocatalysts.     

Smart synthesis of hollow core mesoporous shell carbons (HCMSC) as effective catalyst supports for methanol oxidation and oxygen reduction reactions

The present paper describes an easy and quick synthesis of hollow core mesoporous shell carbon (HCMSC) simply templated from unpretreated solid core mesoporous shell silica using a cheap precursor like sucrose. Physical characterizations showed uniform spherical carbon capsules with a hollow macroporous core of ca. 305- and 55-nm-thick mesoporous shell, forming a well-developed 3-D interconnected bimodal porosity. High specific surface area and large pore volume were also confirmed, suggesting the obtained HCMSC as a promising catalyst support. HCMSC-supported Pt (nominal 20 wt.%) with an average Pt particle size of 1.9 nm was synthesized by wet impregnation, and a signal of strong interaction between carbon support and platinum was confirmed by X-ray photoelectron spectroscopy. In cyclic voltammetry and linear sweep voltammetry tests, the Pt/HCMSC electrode showed significantly higher electrocatalytic activity for methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR) if compared with commercial Pt/Vulcan catalyst. The durability tests by cyclic voltammetry showed for the Pt/HCMSC a lower electrochemical active surface area loss than the commercial one in acidic solution. All the primary tests suggested that the Pt/HCMSC, due to its particular structure and the high dispersion of noble metal particles, is a promising catalyst for fuel cell applications, for MOR and ORR.     

Isolated Single Iron Atoms Anchored on N‐Doped Porous Carbon as an Efficient Electrocatalyst for the Oxygen Reduction Reaction

The development of low‐cost, efficient, and stable electrocatalysts for the oxygen reduction reaction (ORR) is desirable but remains a great challenge. Herein, we made a highly reactive and stable isolated single‐atom Fe/N‐doped porous carbon (ISA Fe/CN) catalyst with Fe loading up to 2.16 wt %. The catalyst showed excellent ORR performance with a half‐wave potential (E _1/2) of 0.900 V, which outperformed commercial Pt/C and most non‐precious‐metal catalysts reported to date. Besides exceptionally high kinetic current density (J _k) of 37.83 mV cm⁻² at 0.85 V, it also had a good methanol tolerance and outstanding stability. Experiments demonstrated that maintaining the Fe as isolated atoms and incorporating nitrogen was essential to deliver the high performance. First principle calculations further attributed the high reactivity to the high efficiency of the single Fe atoms in transporting electrons to the adsorbed OH species.     

Preparation of Pt@SnO2 Core‐Shell Nanoparticles for Photocatalytic Degradation of Formaldehyde

We report the synthesis and characterization of platinum‐tin oxide core‐shell nanoparticles (Pt@SnO₂) for use as a photocatalyst for formaldehyde (HCHO) degradation. We used a sol‐gel process followed by calcination to prepare the Pt@SnO₂ photocatalyst. Transmission Electron Microscopy (TEM) revealed that the average Pt core diameter was 7‐10 nm in diameter, and the SnO₂ shell was approximately 2 nm thick. UV‐Visible spectroscopy displayed the peak from the Pt@SnO₂ core‐shell structures is red‐shifted by 16 nm from that of the Pt nanoparticles. We determined photocatalytic activity by irradiating formaldehyde gas in the presence of nanoparticle samples with an 18 W daylight lamp for 180 min. The irradiated Pt@SnO₂ nanoparticles achieved 93.2% formaldehyde degradation, while TiO₂ (P25), SnO₂, and 1 wt.% Pt/SnO₂ achieved 70.1%, 67.5%, and 66.0% respectively. Thus, Pt@SnO₂ was the most effective material for the degradation of formaldehyde, demonstrating its potential for use as a high efficiency photocatalyst for the degradation of formaldehyde.     

Facile synthesis of platinum nanoparticle-containing porous carbons,and their application to amperometric glucose biosensing

This study describes the facile synthesis of platinum nanoparticle-containing porous carbons (Pt/C) by carbonization of freeze-dried agarose gels containing potassium tetrachloroplatinate under a nitrogen atmosphere at 800 °C. By adjusting the ratio between agarose and platinate in the freeze-dried gels, the Pt content in the final Pt/C products could be systematically varied from 0–10 wt.%. Transmission electron microscopy, inductively coupled plasma atomic emission spectrometry, X-ray photoelectron spectroscopy, Raman spectroscopy, and nitrogen physisorption measurements revealed that the Pt/C materials obtained by this method possess high surface areas (350–500 m² g^?1), narrow Pt nanoparticle size distributions (6 ± 3 nm) and nanocrystalline graphite –like carbon character. By immobilization of glucose oxidase on the surface of a 4 wt.% Pt/C electrocatalyst prepared by this route, a very sensitive amperometric glucose biosensor was obtained (response time <2 min, sensitivity 1.9 mA M^?1; and a linear response with glucose concentration up to 10 mM). The simplicity and versatility of the described synthetic method suggests its application to the preparation of carbon supported noble metal catalysts including palladium/C and gold/C. Figure

This study describes the facile synthesis of platinum nanoparticle-containing porous carbons (Pt/C) by carbonization of freeze-dried agarose gels containing potassium tetrachloroplatinate. The Pt/C materials exhibited excellent electrocatalytic activities, as demonstrated by their successful integration into amperometric glucose biosensor     

Ptshell–Aucore/C electrocatalyst with a controlled shell thickness and improved Pt utilization for fuel cell reactions

Nanoscale Pt_shell–Au_core/C with a controlled shell thickness was successfully synthesized based on a successive reduction strategy. With a Au core size of 4.8 nm, a complete Pt shell of thickness ∼0.6 nm was formed at Pt/Au mole ratio 1:1. The complete coverage of Au core with Pt shell was suggested by various techniques including TEM, UV–vis and cyclic voltammetry. A higher specific activity compared to conventional Pt/C was demonstrated using the probe reaction of methanol electro-oxidation, proving the improved Pt utilization with this core-shell structure.     

Chemoselective Hydrogenation of Functionalized Nitroarenes and Imines by Using Carbon Nanofiber‐Supported Iridium Nanoparticles

The reaction of three types of carbon nanofibers (CNFs; platelet: CNF‐P, tubular: CNF‐T, herringbone: CNF‐H) with Ir₄(CO)₁₂ in mesitylene at 165 °C provided the corresponding CNF‐supported iridium nanoparticles, Ir/CNFs (Ir content=2.3–2.6 wt. %). Transmission electron microscopy (TEM) studies of these Ir/CNF samples revealed that size‐controlled Ir nanoparticles (average particle size of 1.1–1.5 nm) existed on the CNFs. Among the three Ir/CNF samples, Ir/CNF‐T showed an excellent catalytic activity and chemoselectivity towards hydrogenation of functionalized nitroarenes and imines; the corresponding aniline derivatives were obtained with high turnover numbers at ambient temperature under 10 atm of H₂, and the catalyst is reusable. Ir/CNF‐T was also effective for the reductive N‐alkylation of anilines with carbonyl compounds.     

Low‐Temperature Transformation of Methane to Methanol on Pd1O4 Single Sites Anchored on the Internal Surface of Microporous Silicate

Direct conversion of methane to chemical feedstocks such as methanol under mild conditions is a challenging but ideal solution for utilization of methane. Pd₁O₄ single‐sites anchored on the internal surface of micropores of a microporous silicate exhibit high selectivity and activity in transforming CH₄ to CH₃OH at 50–95 °C in aqueous phase through partial oxidation of CH₄ with H₂O₂. The selectivity for methanol production remains at 86.4 %, while the activity for methanol production at 95 °C is about 2.78 molecules per Pd₁O₄ site per second when 2.0 wt % CuO is used as a co‐catalyst with the Pd₁O₄@ZSM‐5. Thermodynamic calculations suggest that the reaction toward methanol production is highly favorable compared to formation of a byproduct, methyl peroxide.