Electrochemical Sensor for Ultrasensitive Determination of Doxorubicin and Methotrexate Based on Cyclodextrin‐Graphene Hybrid Nanosheets

In this work, an electrochemical sensor based on a cyclodextrin‐graphene hybrid nanosheets modified glassy carbon electrode (CD‐GNs/GCE) was proposed for the ultrasensitive determination of doxorubicin and methotrexate. The peak currents of doxorubicin and methotrexate on the CD‐GNs/GCE increased 26.5 and 23.7 fold, respectively, compared to the results obtained on the bare GCE. Under optimized conditions, the linear response ranges for doxorubicin and methotrexate are 10 nM–0.2 µM and 0.1 µM–1.0 µM, with detection limits of 0.1 nM and 20 nM, respectively. The sensor showed the advantages of simple preparation, low cost, high sensitivity, good stability and reproducibility. These properties make the prepared sensor a promising tool for the determination of trace amounts of doxorubicin and methotrexate in biological, clinical and pharmaceutical fields.     

Sensitive Voltammetric Determination of Bisphenol A Based on a Glassy Carbon Electrode Modified with Copper Oxide‐Zinc Oxide Decorated on Graphene Oxide

A highly sensitive and selective chemical sensor was prepared based on metallic copper‐copper oxides and zinc oxide decorated graphene oxide modified glassy carbon electrode (Cu?Zn/GO/GCE) through an easily electrochemical method for the quantification of bisphenol A (BPA). The composite electrode was characterized via scanning electron microscopy (SEM), X‐Ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The electrochemical behavior of BPA in Britton‐Robinson (BR) buffer solution (pH 7.1) was examined using cyclic voltammetry (CV). Under optimized conditions, the square wave voltammetry (SWV) response of Cu?Zn/GO/GCE towards BPA indicates two linear relationships within concentrations (3.0 nmol L^?1?0.1 μmol L^?1 and 0.35 μmol L^?1?20.0 μmol L^?) and has a low detection limit (0.88 nmol L^?1). The proposed electrochemical sensor based on Cu?Zn/GO/GCE is both time and cost effective, has good reproducibility, high selectivity as well as stability for BPA determination. The developed composite electrode was used to detect BPA in various samples including baby feeding bottle, pacifier, water bottle and food storage container and satisfactory results were obtained with high recoveries.     

Fabrication of an Electrochemical L‐Cysteine Sensor Based on Graphene Nanosheets Decorated Manganese Oxide Nanocomposite Modified Glassy Carbon Electrode

The graphene nanosheets/manganese oxide nanoparticles modified glassy carbon electrode (GC/GNSs/MnOx) was simply prepared by casting a thin film of GNSs on the GC electrode surface, followed by performing electrodeposition of MnOx at applied constant potential. The GC/GNSs/MnOx modified electrode shows high catalytic activity toward oxidation of L ‐cysteine. Hydrodynamic amperometry determination of L ‐cysteine gave linear responses over a concentration range up to 120 µM with a detection limit of 75 nM and sensitivity of 27 nA µM^?1. The GC/GNSs/MnOx electrode appears to be a highly efficient platform for the development of sensitive, stable and reproducible L ‐cysteine electrochemical sensors.     

An Electrochemical Sensor Based on Electropolymerization of ß‐Cyclodextrin and Reduced Graphene Oxide on a Glassy Carbon Electrode for Determination of Neonicotinoids

An electrochemical sensor of glassy carbon electrode modified with reduced graphene oxide and β‐cyclodextrin (GCE/rGO/β‐CD) was developed as an effective alternative in the determination of neonicotinoid insecticides, imidacloprid, clothianidin and thiamethoxam, in honey samples. The peak current variation obtained with the proposed sensor was higher compared to the bare GCE in all the analytes. In the determination of imidacloprid the response increased by 1300 %, clothianidin by 670 % and thiametoxam by 630 %. In addition, the optimization of the experimental conditions provided the construction of a sensor with greater sensitivity. The study of interferers showed that inorganic ions (Ca²⁺, Mg²⁺, Fe²⁺, K⁺, Na⁺, e NH₄⁺) and other insecticides (acetamiprid and dinotefuran) did not influence the reduction of imidacloprid, clothianidin and thiamethoxam. The determination of imidacloprid, clothianidin and thiamethoxam in honey samples exhibited recovery values within the EPA range (between 107.75 and 116 %). In conclusion, the developed sensor GCE/rGO/β‐CD proved to be an effective alternative in the determination of neonicotinoid insecticides in honey samples.     

A Metal‐Free Approach Based on Graphene Oxide‐Modified Electrode for Monitoring the Photoelectrocatalytic Degradation of EDTA

A novel voltammetric method for the sensitive determination of ethylenediaminetetraacetic acid (EDTA) was developed based on a graphene oxide (GO) modified electrode. In acetate buffer solution, GO showed a voltammetric response composed of a sharp anodic peak and a weak cathodic peak. When EDTA was present in the solution, the voltammetric response of GO was suppressed. Under optimum conditions, the response of the GO‐modified electrode was inversely proportional to the concentration of EDTA from 6.0×10^?7 to 1.0×10^?4 mol/L. Using such a GO‐based voltammetry, the effective photoelectrocatalytic degradation of EDTA over a TiO₂ film electrode was evaluated and some influencing factors were investigated.     

Highly Sensitive Electrochemical Hydrogen Peroxide Sensor Based on Iron Oxide‐Reduced Graphene Oxide‐Chitosan Modified with DNA‐Celestine Blue

The present study describes a novel and very sensitive electrochemical assay for determination of hydrogen peroxide (H₂O₂) based on synergistic effects of reduced graphene oxide‐ magnetic iron oxide nanocomposite (rGO‐Fe₃O₄) and celestine blue (CB) for electrochemical reduction of H₂O₂. rGO‐Fe₃O₄ nanocomposite was synthesized and characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X‐ray diffraction (XRD), electrochemical impedance spectroscopy and cyclic voltammetry. Chitosan (Chit) was used for immobilization of amino‐terminated single‐stranded DNA (ss‐DNA) molecules via a glutaraldehyde (GA) to the surface of rGO‐Fe₃O₄. The MTT (3‐(4,5‐Dim ethylt hiazol‐2‐yl)‐2,5‐diphenylt etrazolium bromide) results confirmed the biocompatibility of nanocomposite. Experimental parameters affecting the ss‐DNA molecules immobilization were optimized. Finally, by accumulation of the CB on the surface of the rGO‐Fe₃O₄‐Chit/ssDNA, very sensitive amperometric H₂O₂ sensor was fabricated. The electrocatalytic activity of the rGO‐Fe₃O₄‐Chit/DNA‐CB electrode toward H₂O₂ reduction was found to be very efficient, yielding very low detection limit (DL) of 42 nM and a sensitivity of 8.51 μA/μM. Result shows that complex matrices of the human serum samples did not interfere with the fabricated sensor. The developed sensor provided significant advantages in terms of low detection limit, high stability and good reproducibility for detection of H₂O₂ in comparison with recently reported electrochemical H₂O₂ sensors.     

A Sensitive Electrochemical Sensor for Moxifloxacin Hydrochloride Based on Nafion/Graphene Oxide/Zeolite Modified Carbon Paste Electrode

A carbon paste electrode (CPE) modified with Nafion, Graphene oxide and zeolite has been prepared and characterized, and the resulting Nafion/Graphene oxide/Zeolite modified carbon paste electrode (N/G/Z/MCPE) has been applied to the electrochemical detection of Moxifloxacin hydrochloride (MOXI). It exhibited a good electrocatalytic activity in phosphate buffer (optimum at pH 7.4), as pointed out by cyclic voltammetry (CV), and N/G/Z/MCPE can be exploited for MOXI detection by chronoamperometry, electrochemical impedance spectroscopy and differential pulse voltammetry. This latter was the most sensitive one and gave rise to a linear calibration curve in the 0.04 to 250 μM concentration range, with limits of detection and qualification estimated at 1.0 nM and 3.3 nM, respectively. Contrary to previous electrochemical sensors for MOXI (e. g., CPE modified with metal nanoparticles), this new sensor can be used for multiple successive analyses without needing to refresh its surface.     

A Novel Sensitive Electrochemical Sensor Based on Nickel Chloride Solution Modified Glassy Carbon Electrode for Curcumin Determination

In this research, the high conductivity of nickel chloride solution as well as the ability of nickel ions in establishing particular bonds with curcumin was benefited to fabricate a new electrochemical sensor based on nickel chloride solution modified glassy carbon electrode (NiCl₂/GCE) for detection and measurement of curcumin in human blood serum. Atomic force microscope (AFM), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) methods indicated that using nickel chloride solution for the modification of the glassy carbon electrode (GCE) surface had a significant effect on improvement of the electrode performance. Differential pulse voltammetry (DPV) was used for quantitative measurement of curcumin, which exhibited the linear response of NiCl₂/GCE toward curcumin within the concentration range of 10–600 μM and provided the detection limit of 0.109 μM for curcumin in human blood serum.     

Sensitive Voltammetric Determination of Baicalein at Thermally Reduced Graphene Oxide Modified Glassy Carbon Electrode

This work presents a sensitive voltammetric method for determination of the flavonoid baicalein by using a thermally reduced graphene oxide (TRGO) modified glassy carbon electrode (GCE) in 100 mM KCl‐10 mM sodium phosphate buffer solution (pH 7.40). The surface morphology and structure of TRGO investigated by atomic force microscopy, FT‐IR spectroscopy and Raman spectroscopy reveal that the TRGO prepared maintained as single or bilayer sheets and with significant edge‐plane‐like defect sites. The TRGO/GCE modified electrode shows more favorable electron transfer kinetics for potassium ferricyanide and potassium ferrocyanide probe molecules, which are important electroactive compounds, compared with bare GCE and GO/GCE electrodes. The electrochemical behaviors of baicalein at the TRGO/GCE were investigated by cyclic voltammetry, suggesting that the TRGO/GCE exhibits excellent electrocatalytic activity to baicalein. Under physiological conditions, the modified electrode showed linear voltammetric response from 10 nM to 10 µM for baicalein, with a detection limit of 6.0 nM. This work demonstrates that the graphene‐modified electrode is a promising tool for electrochemical determination of flavonoid drugs.     

Graphene Nanosheets Modified Glassy Carbon Electrode as a Highly Sensitive and Selective Voltammetric Sensor for Rutin

Graphene nanosheets modified glassy carbon electrode (GNs/GCE) was fabricated as voltammetric sensor for rutin with good sensitivity, selectivity and reproducibility. The sensor exhibits an adsorption‐controlled, reversible two‐proton and two electron transfer reaction for the oxidation of rutin with a peak‐to‐peak separation (ΔE_p) of 26 mV as revealed by cyclic voltammetry. Moreover, the redox peak current increased about 14 times than that on bare glassy carbon electrode (GCE). The linear response of the sensor is from 1×10^?7 to 1×10^?5 M with a detection limit of 2.1 × 10^?8 M (S/N = 3). The method was successfully applied to determine rutin in tablets with satisfied recovery.     

氧化石墨烯/铁氰化铈修饰玻碳电极同时测定扑热息痛和咖啡因

采用滴涂法和电沉积法制备了氧化石墨烯/铁氰化铈(CeFe(CN)6)纳米复合膜修饰玻碳电极。用扫描电镜对氧化石墨烯和氧化石墨烯/CeFe(CN)6纳米复合膜进行了表征。分别用循环伏安法和差分脉冲伏安法研究了扑热息痛和咖啡因在修饰电极上的电化学行为。结果表明,在0.1 mol/L醋酸盐缓冲溶液(pH5.0)中,扑热息痛和咖啡因在此修饰电极上具有良好的电化学行为,扑热息痛和咖啡因分别在1.0×10-7～6.0×10-5mol/L和1.0×10-6～1.3×10-4mol/L浓度范围内与电化学响应信号呈良好的线性关系,相关系数分别为0.990和0.992;信噪比为3时,扑热息痛和咖啡因检出限分别为5.0×10-8mol/L和5.2×10-7mol/L。将本方法用于人尿样品分析,回收率为96.1%～105.4%。     

Sensitive Electrochemical Determination of Catechol with a Graphene Modified Carbon Ionic Liquid Electrode

In this paper a graphene (GR) modified carbon ionic liquid electrode (CILE) was fabricated and used as the voltammetric sensor for the sensitive detection of catechol. Due to the specific physicochemical characteristics of GR such as high surface area, excellent conductivity and good electrochemical properties, the modified electrode exhibits rapid response and strong catalytic activity with high stability toward the electrochemical oxidation of catechol. A pair of well‐defined redox peaks appeared with the anodic and the cathodic peak potential located at 225 mV and 133 mV (vs.SCE) in pH 6.5 phosphate buffer solution, respectively. Electrochemical behaviors of catechol on the GR modified CILE were carefully investigated and the electrochemical parameters were calculated with the results of the electrode reaction standard rate constant (k_s) as 1.24 s^?1, the charge transfer coefficient (α) as 0.4 and the electron transfer number (n) as 2. Under the selected conditions the differential pulse voltammetric peak current increased linearly with the catechol concentrations in the range from 1.0 × 10^‐7 to 7.0 × 10^?4mol L‐1 with the detection limit as 3.0 × 10^?8mol L‐1 (3σ). The proposed method was further applied to the synthetic waste water samples determination with satisfactory results     

Long‐life Heavy Metal Ions Sensor Based on Graphene Oxide‐anchored Conducting Polymer

A long‐life electrochemical sensor for the continuous analysis of heavy metal ions (Zn(II), Cd(II), Pb(II), Cu(II), and Hg(II)) was developed using the graphene oxide (GO) anchored‐functionalized polyterthiophene (poly[3′‐(2‐aminopyrimidyl)‐2,2′:5′,2′′‐terthiophene], polyPATT) composite. The PATT monomer was synthesized and polymerized with GO to form the composite using a potential cycling method, followed by Nafion coating. The modified sensor surface was characterized employing electrochemical and surface analysis methods. Experimental variables affecting the analytical performance were optimized. Interference effects of other metal ions having similar redox potentials were also investigated. The performance of chronocoulometry (CC) without predeposition was compared with the results of square wave anodic stripping voltammetry (SWASV) with predeposition. The dynamic range of CC for the target ions were between 1 ppb and 10 ppm, respectively with the detection limits between 0.05 (±0.05) and 0.20 (±0.15) ppb for the CC method without predeposition, and between 0.08 (±0.05) and 0.30 (±0.12) ppb for the SWASV with 300 sec of deposition time (n=3 ). The reliability of the method was evaluated by continuously analysing environmental water samples using a single sensor probe in a flow system for 93 days.     

Voltammetric Determination of Sophoridine Based on Gold Nanoparticles/L‐cysteine/ Graphene Modified Glassy Carbon Electrode

A new strategy to make the electrochemical sensor was presented, through combining gold nanoparticles (GNPs) with reduced graphene oxide (rGO) via L‐cysteine (L‐cys) as crosslinker. The resulting electrodes were characterized by scanning electron microscopy (SEM) and electrochemical methods. And it was applied to develop a high‐sensitive electrochemical sensor for determination of sophoridine. Compared with the bare GCE and reduced graphene oxide modified electrode, the resulting electrodes exhibited excellent response toward the oxidation of sophoridine by significantly enhancing the oxidation peak currents and decreasing the overpotential of sophoridine. Under the selected conditions, there exist the linear relation between the oxidation peak currents and sophoridine concentration in the range of 1.0 x 10^‐6～1.0 x 10^‐4 mol L^‐1, with detection limit of 4.0 x 10^‐7 mol L^‐1. At the same time, the method can be successfully applied to the quantitative determination of sophoridine in injection samples and its result is satisfactory.     

Molecularly Imprinted Electrochemical Sensor Based on Modified Reduced Graphene Oxide‐gold Nanoparticles‐polyaniline Nanocomposites Matrix for Dapsone Determination

This work was designed to develop an electrochemical sensor based on molecular imprinted polyaniline membranes onto reduced graphene oxide (RGO) and gold nanoparticles (AuNPs) modified glassy carbon (GC) electrode for dapsone (DDS) determination. The prepared RGO/AuNPs/PANI‐MIPs nanocomposite was characterized by Ultra‐Violet‐Visible (UV‐Vis), Fourier transform infrared spectroscopy (FT‐IR) and scanning electronic microscopy (SEM) images. The feature of the imprinted electrode was evaluated by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and impedance spectroscopy (IS). Throughout this study several analytical parameters, such as incubation time, pH value, concentration of monomer/template molecules and electro‐polymerization cycles were investigated. Under the optimized conditions, the experimental results showed best analytical performances for DDS detection with a sensitivity of 0.188 Ω/mol L^?1, a linear range from 1.0×10^?7 M to 1.0×10^?3 M and a detection limit of 6.8×10^?7 M. The bioanalytical sensor was applied to the determination of dapsone in real samples with high selectivity and recovery.     

Electrochemical Behavior and Voltammetric Determination of Curcumin at Electrochemically Reduced Graphene Oxide Modified Glassy Carbon Electrode

This work presents a sensitive voltammetric method for determination of curcumin by using a electrochemically reduced graphene oxide (ERGO) modified glass carbon electrode (GCE) in 100 mM KCl‐10 mM sodium phosphate buffer solution (pH 7.40). The electrochemical behaviors of curcumin at ERGO/GCE were investigated by cyclic voltammetry, suggesting that the ERGO/GCE exhibits excellent electrocatalytic activity towards curcumin, compared with bare GCE and GO/GCE electrodes. The electrochemical reaction mechanisms of curcumin, demethoxycurcumin and bisdemethoxycurcumin at the ERGO/GCE were also investigated and discussed systematically. Under physiological condition, the modified electrode showed linear voltammetric response from 0.2 μM to 60.0 μM for curcumin, with the detection limit of 0.1 μm. This work demonstrates that the graphene‐modified electrode is a promising strategy for electrochemical determination of biological important phenolic compounds.     

纳米银/石墨烯修饰电极测定青蒿素

本文建立一种新型的青蒿素传感器。首先,在玻碳电极上滴涂氧化石墨,通过电化学方法将氧化石墨还原为石墨烯,然后,在石墨烯上沉积纳米银得到石墨烯/纳米银修饰电极,它作为检测青蒿素的电化学传感器。用此电极对青蒿素进行测定,并通过循环伏安法、差分脉冲伏安法、交流阻抗法等研究其电化学行为。该修饰电极在测定青蒿素溶液时,表现出较正的还原电位和较大的峰电流等优势;对其实验条件如电解质溶液的p H、应用电势等进行了探查,该电化学传感器在青蒿素溶液浓度范围为1.0×10-8~3.0×10-5mol/L时与其还原峰电流呈现良好的线性关系,最低检出限为1.2×10-9mol/L(S/N=3)。此外,对该传感器的稳定性和重现性等也进行了研究,获得令人满意的结果。     

A Highly Sensitive Ascorbic Acid Sensor Based on Graphene Oxide/CdTe Quantum Dots-Modified Glassy Carbon Electrode

Russian Journal of Electrochemistry - Quantum dots (QDs) and graphene oxide (GO) are extremely attractive and important nanomaterials in analytical applications because of their their unusual...     

A High Sensitive TNT Sensor Based on Electrochemically Reduced Graphene Oxide‐Poly(amidoamine) Modified Electrode

In this paper, the electrochemically reduced graphene oxide‐poly(amidoamine) hybrid (ErGO‐PAMAM) have been used for fabrication of TNT electrochemical sensor. The prepared modified electrode is characterized with X‐ray photoelectron spectroscopy (XPS), fourier transform infrared spectroscopy (FT‐IR), electrochemical impedance spectroscopy (EIS), energy‐dispersive X‐ray (EDX) spectroscopy, scanning electron microscopy (SEM) and atomic force microscope (AFM). Based on obtained results, it is can be seen that the ErGO‐PAMAM/GCE has high response to TNT than the other graphene based modified electrodes. The resulting electrochemical sensor exhibited good response to TNT with linear range from 0.05 to 1.2 ppm with a low detection limit of 0.0015 ppm.     

基于石墨烯的毒死蜱分子印迹电化学传感器的制备及对毒死蜱的测定

利用分子印迹技术,以马来松香丙烯酸乙二醇酯为交联剂,使用自由基热聚合法在石墨烯修饰的玻碳电极表面合成毒死蜱( CPF)分子印迹聚合膜,制得了CPF分子印迹电化学传感器。采用循环伏安法、线性扫描伏安法和电化学交流阻抗法等,考察了此CPF分子印迹膜的电化学性能。在最佳检测条件下,传感器的峰电流与CPF浓度在2.0×10-7~1.0×10-5mol/L范围内呈线性关系,线性方程为Ip(μA)=-7.1834-0.2424C (μmol/L),相关系数r2=0.9959,检出限为6.7×10-8 mol/L(S/N=3)。构建了CPF分子印迹电化学传感器的动力学吸附模型,测得印迹传感器的印迹因子β=2.59,结合速率常数k=12.2324 s。传感器表现出良好的重现性和稳定性,并成功用于实际水样和蔬菜样品中CPF的测定,加标回收率为94.1%~101.4%。