Simultaneous enrichment and separation of neutral and anionic analytes through combining large volume sample stacking with sweeping in CE

In this work, we overcame the deficiencies of large volume sample stacking (LVSS) in separating low‐mobility and neutral analytes through combining LVSS with sweeping in CE, and employed this new approach to enrich and separate neutral and anionic analytes simultaneously. This technique was carried out with pressure injection of large‐volume sample followed by EOF as a pump pushing the bulk of low‐conductivity sample matrix out of the outlet of the capillary while analytes were swept by micelles and separated via MEKC without the electrode polarity switching. Careful optimization of the enrichment and separation conditions allowed the enrichment factors (EFs) of peak height and peak area of the analytes to be in the range of 9–33 and 21–35 comparing with the conventional injection mode, respectively. The five analytes were baseline separated in 15 min and the detection limits ranged from 26.5 to 55.8 ng/mL (S/N = 3). The developed method was successfully applied to determine adenine, caffeine, theophylline, reduced L‐glutathione (GSH) and oxidized L‐glutathione (GSSG) in two different teas with recoveries that ranged from 84.4 to 105.2%.     

A highly sensitive method for enantioseparation of fenoprofen and amino acid derivatives by capillary electrophoresis with on-line sample preconcentration

A highly sensitive method for enantioseparation of trace fenoprofen and amino acid derivatives by capillary electrophoresis (CE) with vancomycin as the chiral selector was developed. Several CE techniques, such as the partial filling, large-volume sample stacking with EOF as pump plus anion-selective exhaustive injection (LVSEP-ASEI) were involved in the present method to improve the detection sensitivity. With on-column concentration, enantioseparation of racemic fenoprofen and six 9-fluorenylmethyl chloroformate (FMOC)-amino acid derivatives (at the concentration level of ng/mL) with the background electrolyte composed of 100 mmol/L Tris-H(3)PO(4) (pH 6.0) and 2 mmol/L vancomycin was detected readily with the UV detection at 214 nm. Successfully performing LVSEP-ASEI needs a very low EOF that could be depressed by coating the capillary with poly(dimethylacrylamide) solution. The coating also played a role to minimize the adsorption of vancomycin onto the capillary wall. Effect of the injected sample volume and the electrokinetic injection time on the peak area of the enantiomers and their resolution factor were investigated and optimized. Under the optimized conditions, more than 1000-fold enhancement in detection sensitivity compared with the normal injection was achieved.     

Simultaneous determination of thiamethoxam and its metabolite clothianidin by LC-MS/MS in goji berry and soil

In this study, an effective analytical method for simultaneous determination of thiamethoxam and its metabolite clothianidin in goji berry and soil was developed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The recoveries of the compounds in goji berry and soil at the levels of 0.005, 0.02, and 0.1 μg kg^?1 were 84.7–98.9% and the relative standard deviations (RSDs) were 0.9–3.2%. The limits of detection (LOD) for both compounds in goji berry and soil matrices were 0.001 mg kg^?1; the limits of quantification (LOQ) were 0.005 mg kg^?1 for both compounds in two matrices. The dissipation and final residual experiments in 2016 with the commercial formulation of dinotefuran ? thiamethoxam 30% suspension concentrate (SC) was conducted in goji berries in northwest China (Qinghai, Gansu, Inner Mongolia, and Ningxia). Thiamethoxam was dissipated fast in goji plant ecosystem with half-lives were 1.08–1.01 and 2.04–4.25 days in goji berry and soil. The final residues of thiamethoxam were <0.005–0.382 and <0.005–1.120 mg kg^?1 in goji berry and soil, respectively.     

Improving sensitivity by large-volume sample stacking combined with sweeping without polarity switching by capillary electrophoresis coupled to photodiode array ultraviolet detection

An easy, simple, and highly efficient on-line preconcentration method for polyphenolic compounds in CE was developed. It combined two on-line concentration techniques, large-volume sample stacking (LVSS) and sweeping. The analytes preconcentration technique was carried out by pressure injection of large-volume sample followed by the EOF as a pump pushing the bulk of low-conductivity sample matrix out of the outlet of the capillary without the electrode polarity switching technique using five polyphenols as the model analytes. Identification and quantification of the analytes were performed by photodiode array UV (PDA) detection. The optimal BGE used for separation and preconcentration was a solution composed of 10 mM borate-90 mM sodium cholate (SC)-40% v/v ethylene glycol, without pH adjustment, the applied voltage was 27.5 kV. Under optimal preconcentration conditions (sample injection 99 s at 0.5 psi), the enhancement in the detection sensitivities of the peak height and peak area of the analytes using the on-line concentration technique was in the range of 18-26- and 23-44-fold comparing with the conventional injection mode (3 s). The detection limits for (-)-epigallocatechin (EGC), (-)-epicatechin (EC), (+)-catechin (C), (-)-epigallocatechin gallate (EGCG), and (-)-epicatechin gallate (ECG) were 4.3, 2.4, 2.2, 2.0, and 1.6 ng/mL, respectively. The five analytes were baseline-separated under the optimum conditions and the experimental results showed that preconcentration was well achieved.     

Determination of chlorophenols in water using dispersive liquid–liquid microextraction coupled with water‐in‐oil microemulsion electrokinetic chromatography in normal stacking mode

The current routes to couple dispersive liquid–liquid microextraction with capillary electrophoresis are the evaporation of water immiscible extractants and the back‐extraction of analytes. In this study, a new methodology for this combination using water‐in‐oil microemulsion electrokinetic chromatography coupled with normal stacking mode on‐line sample concentration was developed to analyze chlorophenols in water samples. The analytes were extracted with tributyl phosphate and the extractant dilution (3×) was directly injected into an electrophoresis buffer (7.7 cm) containing 5% sodium dodecyl sulfate, 78% 1‐butanol, 2% 1‐heptane, and 15% sodium acetate solution (pH 8.0). This proposed method is very simple and convenient compared to the conventional procedures. The key parameters affecting separation and concentration were systematically optimized. Under the optimized conditions, dispersive liquid–liquid microextraction contributed an enrichment factor of 45–50, and the overall sensitivity improvement was 312–418‐fold. Limits of detection between 1.4 and 3.0 ng/mL and limits of quantification between 4.5 and 10.2 ng/mL were achieved. Acceptable repeatability lower than 3.0% for migration time and 9.0% for peak areas were obtained. The developed method was successfully applied for analysis of the chlorophenols in real water samples.     

Separation and Determination of Clenbuterol,Cimaterol and Salbutamol by Capillary Electrophoresis with Amperometric Detection

Capillary electrophoresis with amperometric detection was applied to determine some β₂‐agonists, such as clenbuterol, cimaterol and salbutamol in this paper. The working electrode used was a 0.3 mm diameter carbon disk electrode. In this work, the pH 6.0–6.4 borax‐potassium dihydrogen phosphate was used as running buffer (150 mmol/L), 10 kV as the separation voltage and 1.05 V (vs. Ag/AgCl, 3 mol/L KCl) as the detection potential. Under the optimum conditions, the analytes were baseline separated within 16 min. Linear range for cimaterol, clenbuterol and salbutamol was 1.0–2000, 2.0–2000 and 1.0–2000 ng/mL, respectively. The detection limits (define as 3σ/k) were 0.5, 1.0 and 0.4 ng/mL for cimaterol, clenbuterol and salbutamol, respectively. The developed method has been applied to determine these three analytes in feed and urine by standard addition. The mean recoveries for these three analytes ranged from 89.0% to 102.0%.     

On-line coupling of capillary isotachophoresis and zone electrophoresis for the assay of phenolic compounds in plant extracts

The combination of capillary isotachophoresis (ITP) and capillary zone electrophoresis (CZE) in the column coupling configuration was optimized in a mode where the electrolyte for the CZE step is different from the leading and terminating ITP electrolytes. Two colored markers, picric acid and 1-nitroso-2-naphthol, were used for exact timing of the transfer of isotachophoretically stacked analyte zones into the CZE column and for the control of the residual amount of the leading and terminating ITP electrolytes entering the CZE capillary together with the analytes, thus controlling the duration of transient ITP migration in the CZE capillary and ensuring good separation of the analytes and reproducibility of the migration times (relative standard deviations 1%). ITP-CZE was applied to the simultaneous assay of several cinnamic acid derivatives and flavonoids in methanolic extracts of Sambucus flowers and Crataegus leaves and flowers. The preconcentrating and cleansing effect of the ITP step allowed injection of relatively large sample volumes (30 microL). The limits of detection were approximately 20-50 ng x mL(-1) and 100 ng x mL(-1) for the acids and flavonoids, respectively ( thick similar 200-times lower compared to conventional CE) with spectrophotometric detection at 254 nm. The ITP-CZE exhibited satisfactory linearity and precision when using CZE buffer of pseudo "pH" 9.0; 1-nitroso-2-naphthol was employed as the internal standard. The separation took approximately 35 min. The ITP-CZE results for rutin, hyperoside, and vitexin-2-O"-rhamnoside were in good accordance with those obtained previously by high-performance liquid chromatography.     

Separation and determination of flavonoids in three traditional chinese medicines by capillary electrophoresis with amperometric detection

Flavonoids are important active ingredients in many traditional Chinese medicines. In this paper, capillary electrophoresis with amperometric detection was employed to separate and detect eight flavonoids, rutin, quercetrin, quercetin, kaempferol, kaempferide, catechin, apigenin, and luteolin, in a home‐made capillary electrophoresis device. Under the separation voltage of 2000 V, the eight flavonoids could be completely separated within 33 min in 18 mM borax running buffer at pH 10.2. Good linear relationships were obtained for all analytes and the detection limits for flavonoids ranged from 0.46 to 0.85 μM. Then, the method was applied to separate and determine the flavonoids in three traditional Chinese medicines, hippophae rhamnoides, hypericum perforatum, and cacumen platycladi. Finally, rutin, kaempferol, quercetin, and quercetrin were discovered in these medicines and the concentrations ranged from 0.28 to 9.94 mg/g. The recoveries of flavonoids ranged from 84.7 to 113%, which showed the high reliability of this method.     

Capillary electrophoresis with electrochemiluminescence detection for the simultaneous determination of cisatracurium besylate and its degradation products in pharmaceutical preparations

Capillary electrophoresis with electrochemiluminescence detection for the simultaneous analysis of cisatracurium besylate and its degradation products (laudanosine, quaternary monoacrylate) in pharmaceutical preparation was developed and fully validated. The significant parameters that influence capillary electrophoresis separation and electrochemiluminescence detection were optimized. The total analysis time of the analytes was 15 min. The linearities of the method were 0.1～40.0 μg/mL for cisatracurium besylate and 0.04～8.00 μg/mL for laudanosine, with correlation coefficients (r) of 0.999 and 0.998, respectively. The detection limits (S/N = 3) were 83.0 ng/mL for cisatracurium besylate and 32.0 ng/mL for laudanosine. The intraday relative standard deviations of the analytes were <3.0%, and the interday relative standard deviations were <8.0%. The developed method was cost‐effective, sensitive, fast, and resource‐saving, which was suitable for the ingredient analysis in pharmaceutical preparation.     

Rapid screening of beta‐adrenergic agents and related compounds in human urine for anti‐doping purpose using capillary electrophoresis with dynamic coating

This paper presents a capillary electrophoresis method, developed for the detection, in human urine, of beta‐adrenergic agents and phenolalkylamines. The electrophoretic separation is achieved in less than 10 min and is based on the use of CEofix kit, for the dynamic capillary coating. The effects of accelerator buffer pH and separation voltage were investigated. The optimum buffer pH was found to be 2.5 for beta2‐agonists and 6.2 for beta‐blockers and phenoalkylamines with a separation voltage of 15 kV. Urine samples spiked with the compounds here studied were treated according to the standard procedure (SPE and evaporation to dryness) and analyzed by CE interfaced with an UV diode‐array, set at 195 and 210 nm. The quantitative validation results, obtained analyzing samples at three different concentrations, show a good precision of peak areas that do not exceed 5% for intra‐day assays and 10% for inter‐day assays. Good linearity (r² > 0.995) was obtained within the 50–500 ng/mL concentration range. The qualitative validation data show a relative migration times (MTs) variation lower than 1%. The analytes were clearly distinguishable in urine, with LOD and LOQ in the range of 10–80 and 40–100 ng/mL, respectively.     

Simultaneous quantification of three tropane alkaloids in goji berries by cleanup of the graphene/hexagonal boron nitride hybrids and ultra‐high‐performance liquid chromatography tandem mass spectrometry

A modified quick, easy, cheap, effective, rugged and safe method was established for simultaneous determination of atropine, anisodamine, and scopolamine in goji berries by using ultra‐high‐performance liquid chromatography with tandem mass spectrometry. The graphene/hexagonal boron nitride hybrids were prepared and first applied as a cleanup adsorbent. Compared to classical cleanup adsorbent (C₁₈), the graphene/hexagonal boron nitride hybrids as adsorbent had better extraction efficiency for the detection of analytes. Under the optimal conditions, the proposed analytical method achieved satisfactory linearity (R² > 0.995), and obtained desirable recoveries ranged from 77.4 to 94.0% with the relative standard deviation of 1.2–6.1% at the concentration levels of 3.2–13.4 µg/kg. The limits of quantitation of atropine, anisodamine, and scopolamine were, respectively, 3.2, 4.6, and 4.5 µg/kg with linearity ranged from 3.2 to 25.4 µg/kg. The modified quick, easy, cheap, effective, rugged, and safe sample preparation with ultra‐high‐performance liquid chromatography and tandem mass spectrometry method was successfully applied to evaluate the safety of goji berries collected from 30 plant areas in China, suggesting its applicability and suitability for the routine analysis of three tropane alkaloids in goji berries.     

Determination of several synthetic cathinones and an amphetamine‐like compound in urine by gas chromatography with mass spectrometry. Method validation and application to real cases

Most routine practices for drugs‐of‐abuse testing do not include screening procedures for new psychoactive substances, despite their increasing diffusion, preventing clear knowledge of the real consumption of these drugs in the populations. To make up for this shortcoming, a gas chromatography with mass spectrometry method was developed for the simultaneous determination of 18 synthetic cathinones and one amphetamine‐like compound in human urine. The sample preparation was based on liquid–liquid extraction under alkaline condition followed by derivatization with trifluoroacetic anhydride. The separation of the 19 analytes was achieved in less than 10 min. The whole methodology was validated according to national and international guidelines. Selectivity, linearity range, limit of detection and limit of quantitation, precision and accuracy were evaluated. For all the analytes, the calibration curve was linear in the 100–1000 ng/mL concentration range. The limits of detection ranged from 10 to 30 ng/mL and limits of quantitation from 30 to 100 ng/mL. Precisions were in the ranges 0.1–10.4%, and 1.0–12.1% for low (100 ng/mL) and high (1000 ng/mL) concentration, respectively. The accuracy, expressed as bias% was within ±20% for all the analytes. The present method was successfully applied to urine samples originating from autopsies, drug abuse/withdrawal controls, clinical investigations, roadside controls, driving re‐licensing, and workplace testing.     

Large volume sample stacking in capillary electrophoresis of weakly acidic compounds using coated capillaries at high pH

Large volume stacking using the electroosmotic flow (EOF) pump (LVSEP) in capillary electrophoresis under a reverse potential is a convenient and straightforward approach for on-line concentration of dilute anionic sample solutions. LVSEP achieves automatic sample matrix removal and subsequent separation without intermediate polarity switching nor complicated instrumental setup. Since anionic analytes should move against the EOF in LVSEP, EOF needs to be suppressed. We extended the range of LVSEP up to pH 11 using various EOF suppression methods, such as dynamic coating by polymer pretreatment and permanent coating. Weakly acidic organic compounds (pK_a<5.2), chlorinated phenols (pK_a=7-9), and aromatic amino acids (pK_a2∼9.3) were concentrated and separated. By hydrodynamically filling the whole capillary of 27 cm long with the sample solution, fast and reliable injection was achieved and sensitivity enhancement factors as large as 170 were readily obtained in less than 8 min.     

Simultaneous stacking of cationic and anionic compounds in single run capillary zone electrophoresis by two-end field amplified sample injection

In order to extend the application of field amplified sample injection (FASI) in high throughput analysis, a convenient and simple procedure, namely two-end field amplified sample injection (TE-FASI), was developed for the simultaneous stacking of cationic and anionic compounds in a single run capillary zone electrophoresis (CZE). Following the capillary-filling with a buffer of high conductivity, water plug was loaded into each end of the capillary; and two high-field strength zones were generated at both heads of the column when high voltage was applied. Therefore, under suppressed EOF cations and anions can be selectively FASI stacked at anode and cathode head, respectively. After separation, the stacked anions and cations are detected by a common detector placed in the center of the capillary. Under the optimized conditions, the limits of detection for the model cationic (matrine and oxymatrine) and anionic (5-sulfosalicylic acid) compounds were determined as 0.2, 0.2 and 0.06 ng/mL, respectively. Compared with non-stacking conditions, the sensitivities of these compounds were enhanced 1003-, 1330- and 1380-fold, respectively. The results of reproducibility, linearity and real sample analysis show that the proposed procedure is promising to be applied for the simultaneous quantification detection of trace cationic and anionic analytes.     

Molecularly imprinted polymer surfaces as solid-phase extraction sorbents for the extraction of 2-nitrophenol and isomers from environmental water

The novel surface molecularly imprinted polymer (MIP) with 2‐nitrophenol (2‐NP) as the template has been prepared and used as the adsorbent for the solid‐phase extraction (SPE). The selectivity of the polymer was checked toward several selected nitrophenols (NPs) such as 2‐NP, 3‐nitrophenol (3‐NP), 4‐nitrophenol (4‐NP) and 2,4,6‐trichlorophenol (2,4,6‐TCP). Under the optimized conditions, high sensitivity (detection limits: 0.07–0.12 ng/mL) and good reproducibility of analytes (2.3–4.8% for four cycles) were achieved. Then, the method was applied for the analysis of selected phenols in spiked tap, lake and river water samples. High recoveries (>83.3%) for nitrophenols (NPs) were obtained, but lower recoveries (<63.4%) were achieved for 2,4,6‐TCP. The method was found to be linear in the range of 1–300 ng/mL with correlation coefficients (R²) greater than 0.99 and repeatability relative standard deviation (RSD) below 7.2% in all cases. For analysis of 120 mL water samples, the method detection limits (LODs) ranged from 0.10 to 0.22 ng/mL and the limit of quantification (LOQs) from 0.33 to 0.72 ng/mL. These results showed the suitability of the MIP‐SPE method for the selective extraction of a group of structurally related isomeric compounds.     

Rapid and simple determination of psychotropic phenylalkylamine derivatives in urine by direct injection liquid chromatography–electrospray ionization–tandem mass spectrometry

A direct injection liquid chromatography–electrospray ionization–tandem mass spectrometric method (LC‐ESI‐MS/MS) was developed and validated for the rapid and simple determination of 13 phenylalkylamine derivatives. Eight deuterium‐labeled compounds were prepared for use as internal standards (ISs) to quantify the analytes. Urine samples mixed with ISs were centrifuged, filtered through 0.22 µm filters and then injected directly into the LC‐ESI‐MS/MS system. The mobile phase was composed of 0.2% formic acid and 2 mM ammonium formate in distilled water and 0.2% formic acid and 2 mM ammonium formate in acetonitrile. The analytical column was a Capcell Pak MG‐II C₁₈ (150 × 2.0 mm i.d., 5 µm, Shiseido). Separation and detection of the analytes were accomplished within 10 min. The linear ranges were 5–750 ng/mL (ephedrine and fenfluramine), 10–750 ng/mL (3,4‐methylenedioxyamphetamine, phendimetrazine, methamphetamine, 3,4‐methylenedioxyethylamphetamine and benzphetamine), 20–750 ng/mL (norephedrine, amphetamine, phentermine and ketamine) and 30–1000 ng/mL (3,4‐methylenedioxymethamphetamine and norketamine), with determination coefficients, R², ≥ 0.9967. The intra‐day and inter‐day precisions were within 19.1%. The intra‐day and inter‐day accuracies ranged from ?16.0 to 18.7%. The lower limits of quantification for all the analytes were lower than 26.5 ng/mL. The applicability of the method was examined by analyzing urine samples from drug abusers (n = 30). Copyright © 2012 John Wiley & Sons, Ltd.     

Method development approaches for capillary ion electrophoresis

Capillary ion electrophoresis (CIE) is a capillary electrophoretic technique optimized for rapid determination of low-molecular-mass inorganic and organic ions. CIE predominantly employs indirect UV detection since the majority of the analytes lack specific chromophores. Described are three methods for detection and electrolyte optimization. The first method discussed approaches for optimizing sensitivity, selectivity and peak confirmation using a chromate electrolyte and selected detection wavelengths. Peak confirmation is aided by using both direct detection of analytes. The second and third methods involve an unattended electrolyte development approach for instruments that only provide fresh electrolyte on the injection side of the capillary. The electrolyte composition is changed in both the injection side vial and in capillary before each sample injection while leaving the receiving side electrolyte vial constant at the initial electrolyte composition. In one mode, the concentration of the electroosmotic flow (EOF) modifier used to induce anodic flow is varied while keeping the background electrolyte composition constant. In a second experiment, the background electrolyte co-ion is sequentially changed from high mobility to low mobility while keeping the EOF modifier concentration constant. The end effect is to achieve a broad range of controlled peak symmetry for analytes in a simple matrix. The results are compared to separations obtained when the injection side and receiving side electrolytes are manually matched.     

Pressure-assisted field-amplified sample injection with reverse migrating micelles for analyzing trace steroids in MEKC

This paper describes a novel method that applies pressure-assisted field-amplified sample injection with reverse migrating micelles (PA-FASI-RMM) for the online concentration of neutral analytes in MEKC with a low-pH BGE. After injection of a plug of water into the separation capillary, negative voltage and positive pressure were simultaneously applied to initialize PA-FASI-RMM injection. The hydrodynamic flow generated by the positive pressure compensated the reverse EOF in the water plug and allowed the water plug to remain in the capillary during FASI with reverse migrating micelles (FASI-RMM) to obtain a much longer injection time than usual, which improved stacking efficiency greatly. Equations describing this injection mode were introduced and were supported by experimental results. For a 450-s online PA-FASI-RMM injection, three orders of magnitude sample enhancement in terms of peak area could be observed for the steroids and an achievement of detection limits was between 1 and 10 ng/mL.     

Trace analysis of acetylcholinesterase inhibitors with antipsychotic drugs for Alzheimer’s disease by capillary electrophoresis with on column field-amplified sample injection

A simple and sensitive capillary zone electrophoresis (CZE) with UV detection (214 nm) was developed and validated for the simultaneous determination of the acetylcholinesterase inhibitors (AChEI), donepezil, and rivastigmine, with antipsychotic drugs in plasma. A sample pretreatment by liquid–liquid extraction and subsequent quantification by CZE with field-amplified sample injection (FASI) was used. The optimum separation for these analytes was achieved in <20 min at 25 °C with a fused-silica capillary column of 60.2 cm?×?50 μm I.D. (effective length 50 cm) and a run buffer containing 120 mM phosphate (pH 4.0) with 0.1 % γ-cyclodextrin, 40 % methanol (MeOH), and 0.02 % polyvinyl alcohol as a dynamic coating to reduce analytes’ interaction with the capillary wall. Using phenformin as an internal standard (40.0 ng/mL), the linear ranges of the proposed method for the simultaneous determination of donepezil, rivastigmine, aripiprazole, quetiapine, risperidone, clozapine, ziprasidone, and trazodone were over the range 4.0–80.0 ng/mL, and olanzapine was over the range 1.0–20.0 ng/mL. The method was applied for concentrations monitoring of AChEIs and antipsychotic drugs in ten Alzheimer’s disease patients with behavioral and psychological symptoms of dementia after oral administration of the commercial products.

Simultaneous determination of tandospirone and its active metabolite, 1‐[2‐pyrimidyl]‐piperazine in rat plasma by LC–MS/MS and its application to a pharmacokinetic study

A rapid, sensitive and selective liquid chromatography–tandem mass spectrometry method for the detection of tandospirone (TDS) and its active metabolite 1‐[2‐pyrimidyl]‐piperazine (1‐PP) in Sprague–Dawley rat plasma is described. It was employed in a pharmacokinetic study. These analytes and the internal standards were extracted from plasma using protein precipitation with acetonitrile, then separated on a CAPCELL PAK ADME C₁₈ column using a mobile phase of acetonitrile and 5 mm ammonium formate acidified with formic acid (0.1%, v/v) at a total flow rate of 0.4 mL/min. The detection was performed with a tandem mass spectrometer equipped with an electrospray ionization source. The method was validated to quantify the concentration ranges of 1.000–500.0 ng/mL for TDS and 10.00–500.0 ng/mL for 1‐PP. Total time for each chromatograph was 3.0 min. The intra‐day precision was between 1.42 and 6.69% and the accuracy ranged from 95.74 to 110.18% for all analytes. Inter‐day precision and accuracy ranged from 2.47 to 6.02% and from 98.37 to 105.62%, respectively. The lower limits of quantification were 1.000 ng/mL for TDS and 10.00 ng/mL for 1‐PP. This method provided a fast, sensitive and selective analytical tool for quantification of tandospirone and its metabolite 1‐PP in plasma necessary for the pharmacokinetic investigation.