An Efficient,Visible‐Light‐Driven,Hydrogen Evolution Catalyst NiS/ZnxCd1−xS Nanocrystal Derived from a Metal–Organic Framework

Photocatalytic water splitting for hydrogen production using sustainable sunlight is a promising alternative to industrial hydrogen production. However, the scarcity of highly active, recyclable, inexpensive photocatalysts impedes the development of photocatalytic hydrogen evolution reaction (HER) schemes. Herein, a metal–organic framework (MOF)‐template strategy was developed to prepare non‐noble metal co‐catalyst/solid solution heterojunction NiS/Zn_xCd_1?xS with superior photocatalytic HER activity. By adjusting the doping metal concentration in MOFs, the chemical compositions and band gaps of the heterojunctions can be fine‐tuned, and the light absorption capacity and photocatalytic activity were further optimized. NiS/Zn_0.5Cd_0.5S exhibits an optimal HER rate of 16.78 mmol g^?1 h^?1 and high stability and recyclability under visible‐light irradiation (λ>420 nm). Detailed characterizations and in‐depth DFT calculations reveal the relationship between the heterojunction and photocatalytic activity and confirm the importance of NiS in accelerating the water dissociation kinetics, which is a crucial factor for photocatalytic HER.     

Enhanced Photocatalytic Hydrogen‐Production Performance of Graphene–ZnxCd1−xS Composites by Using an Organic S Source

In response to the increasing concerns over energy and environmental sustainability, photocatalytic water‐splitting technology has attracted broad attention for its application in directly converting solar energy to valuable hydrogen (H₂) energy. In this study, high‐efficiency visible‐light‐driven photocatalytic H₂ production without the assistance of precious‐metal cocatalysts was achieved on graphene–Zn_xCd_1?xS composites with controlled compositions. The graphene‐Zn_xCd_1?xS composites were for the first time fabricated by a one‐step hydrothermal method with thiourea as an organic S source. It was found that thiourea facilitates heterogeneous nucleation of Zn_xCd_1?xS and in situ growth of Zn_xCd_1?xS nanoparticles on graphene nanosheets. Such a scenario results in abundant and intimate interfacial contact between graphene and Zn_xCd_1?xS nanoparticles, efficient transfer of the photogenerated charge carriers, and enhanced photocatalytic activity for H₂ production. The highest H₂‐production rate of 1.06 mmol h^?1 g^?1 was achieved on a graphene–Zn_0.5Cd_0.5S composite photocatalyst with a graphene content of 0.5 wt %, and the apparent quantum efficiency was 19.8 % at 420 nm. In comparison, the graphene–Zn_xCd_1?xS composite photocatalyst prepared by using an inorganic S source such as Na₂S exhibited much lower activity for photocatalytic H₂ production. In this case, homogeneous nucleation of Zn_xCd_1?xS becomes predominant and results in insufficient and loose contact with the graphene backbone through weak van der Waals forces and a large particle size. This study highlights the significance of the choice of S source in the design and fabrication of advanced graphene‐based sulfide photocatalytic materials with enhanced activity for photocatalytic H₂ production.     

An Efficient and Stable MoS2/Zn0.5Cd0.5S Nanocatalyst for Photocatalytic Hydrogen Evolution

Photocatalytic hydrogen evolution by water splitting is highly important for the application of hydrogen energy and the replacement of fossil fuel by solar energy, which needs the development of efficient catalysts with long-term catalytic stability under light irradiation in aqueous solution. Herein, Zn_0.5Cd_0.5S solid solution was synthesized by a metal–organic framework-templated strategy and then loaded with MoS₂ by a hydrothermal method to fabricate a MoS₂/Zn_0.5Cd_0.5S heterojunction for photocatalytic hydrogen evolution. The composition of MoS₂/Zn_0.5Cd_0.5S was fine-tuned to obtain the optimized 5 wt % MoS₂/Zn_0.5Cd_0.5S heterojunction, which showed a superior hydrogen evolution rate of 23.80 mmol h⁻¹ g⁻¹ and steady photocatalytic stability over 25 h. The photocatalytic performance is due to the appropriate composition and the formation of an intimate interface between MoS₂ and Zn_0.5Cd_0.5S, which endows the photocatalyst with high light-harvesting ability and effective separation of photogenerated carriers.     

Construction of CoS2/Zn0.5Cd0.5S S-Scheme Heterojunction for Enhancing H2 Evolution Activity Under Visible Light

In the field of photocatalysis, building a heterojunction is an effective way to promote electron transfer and enhance the reducibility of electrons. Herein, the S-scheme heterojunction photocatalyst (CoS₂/Zn_0.5Cd_0.5S) of CoS₂ nanospheres modified Zn_0.5Cd_0.5S solid solution was synthesized and studied. The H₂ evolution rate of the composite catalyst reached 25.15 mmol g⁻¹ h⁻¹, which was 3.26 times that of single Zn_0.5Cd_0.5S, whereas pure CoS₂ showed almost no hydrogen production activity. Moreover, CoS₂/Zn_0.5Cd_0.5S had excellent stability and the hydrogen production rate after six cycles of experiments only dropped by 6.19 %. In addition, photoluminescence spectroscopy and photoelectrochemical experiments had effectively proved that the photogenerated carrier transfer rate of CoS₂/Zn_0.5Cd_0.5S was better than CoS₂ or Zn_0.5Cd_0.5S single catalyst. In this study, the synthesized CoS₂ and Zn_0.5Cd_0.5S were both n-type semiconductors. After close contact, they followed an S-scheme heterojunction electron transfer mechanism, which not only promoted the separation of their respective holes and electrons, but also retained a stronger reduction potential, thus promoting the reduction of H⁺ protons in photocatalytic experiments. In short, this work provided a new basis for the construction of S-scheme heterojunction in addition to being used for photocatalytic hydrogen production.     

In situ integration of efficient photocatalyst Cu1.8S/ZnxCd1-xS heterojunction derived from a metal-organic framework

The development of photocatalysts for hydrogen evolution is a promising alternative to industrial hydrogen evolution; however, generation of high active, recyclable, inexpensive heterojunctions are still challenging. Herein, a novel strategy was developed to synthesize non-noble metal co-catalyst/solid solution heterojunctions using metal-organic frameworks (MOFs) as a precursor template. By adjusting the content of MOFs, a series of Cu_1.8S/Zn_xCd_1-xS heterojunctions were obtained, and the Cu_1.8S(3.7%)/Zn_0.35Cd_0.65S sample exhibits a maximum hydrogen evolution rate of 14.27 mmol h⁻¹ g⁻¹ with an apparent quantum yield of 3.7% at 420 nm under visible-light irradiation. Subsequently, the relationship between the heterojunction and photocatalytic activity were investigated by detailed characterizations and density functional theory (DFT) calculations, which reveal that loading Cu_1.8S can efficiently extend the light absorption, meanwhile, the electrons can efficiently transfer from Zn_0.35Cd_0.65S to Cu_1.8S, thus resulting more photogenerated electrons participating in surface reactions. This result can be valuable inspirations for the exploitation of advanced materials using rationally designed nanostructures for solar energy conversion.     

Template‐Free Preparation of Volvox‐like CdxZn1−xS Nanospheres with Cubic Phase for Efficient Photocatalytic Hydrogen Production

Volvox‐like Cd_xZn_1?xS solid solutions with a cubic zinc blend structure were synthesized through a template‐free ethylene glycol process. Cd(Ac)₂ ? 2 H₂O, Zn(Ac)₂ ? 2 H₂O, and thiourea are used as the starting materials and dissolved in ethylene glycol. These reaction precursors and solvent not only contributed to control over the formation of the volvox‐like spherical geometry, but also exerted vigorous domination for existence of cubic‐phase Cd_xZn_1?xS nanostructures. As‐prepared volvox‐like Cd_xZn_1?xS nanospheres have a diameter of around 100 nm with extensional shells. These samples show excellent photocatalytic H₂ evolution activity from water splitting under visible‐light irradiation without any cocatalyst or scaffolding, owing to their tunable band gap, cubic zinc blend structure, and unique hierarchical porous structure with a high surface area (as high as 95.2 m² g^?1).     

New organosols of nickel sulfides,palladium sulfides,manganese sulfide,and mixed metal sulfides and their use in preparation of semiconducting polymer-metal sulfide composites

Organosols of NiS, PdS, and MnS in N,N-dimethylformamide were prepared by reaction of the metal acetate with H₂S. Organosols of mixed-metal sulfides (Zn _x Cd_1–x S, Hg _x Cd_1–x S, Hg _x Cu_1–x S, Cd _x Mn_1–x S, Hg _x Mn_1–x S, Hg _x Cd_1–x S, and Mn _x Zn_1–x S) were similarly obtained by reaction of mixtures of the metal salts with H₂S. The organosol of Zn_0.5Cd_0.5S contained particle with two particle size distributions centered at 6.5 nm and 29 nm, as revealed by Ar laser-scattering analysis. The metal sulfides are recovered by addition of Et₂O to the organosols. Zn _x Cd_1–x S thus obtained shows magnetic susceptibility in the range 0.5×10^–6–2.3×10^–6 emug^–1 depending on thex value. Addition of polymers to the organosols affords semiconducting films of metal sulfide-polymer composites.     

水热法制备NiS/Cd1-xZnxS及其高效光催化产氢性能

利用水热法制备 NiS 负载的 Cd1-xZnxS 光催化剂.结果表明：在0.35 mol?L-1 Na2SO3和0.25 mol?L-1 Na2S牺牲剂下,0.5%(摩尔分数, y) NiS/Cd0.3Zn0.7S (1840μmol?h-1)获得最好活性,是Cd0.3Zn0.7S (884μmol?h-1)的2.1倍,高于0.5%(质量分数, w) Pt (1390μmol?h-1)的产氢活性.测得其在λ=420 nm附近的表观量子效率为36.8%. X射线衍射(XRD)、紫外-可见漫反射光谱(UV-Vis DRS)、透射电子显微镜(TEM)以及X射线光电子能谱(XPS)的表征结果表明, NiS作为产氢活性位,转移光生电子,因此提高了光催化产氢活性.     

Photopolymerization of water-soluble acrylic monomers induced by colloidal CdS and Cd x Zn1 − x S nanoparticles

Photocatalytic activity of CdS and Cd _x Zn_1−x S nanoparticles in the polymerization of acrylamide and acrylic acid in aqueous solutions has been found. It has been shown that the most probable way of the photogeneration of primary radicals is the reduction of an adsorbed monomer by the conduction band electrons of the semiconductor nanoparticles, a monomer oxidation by the valence band holes and atomic hydrogen addition to a monomer being complementary photoinitiation routes. A correlation between the composition of Cd_xZn_1-xS nanoparticles and their photocatalytic activity in the acrylamide polymerization has been established. It has been shown that an increase in the quantum yield of the photopolymerization in a sequence СdS < Cd_0.75Zn_0.25S < CdS_0.5Zn_0.5S < Cd_0.3Zn_0.7S originates from a concurrent increase of the conduction band potential of the semiconductor nanoparticles. A kinetic equation of the photocatalytic acrylamide polymerization has been derived. Quantum yields of the photoinitiation have been found to be as small as 10⁻⁴ to 10⁻³.     

硫化锌镉固溶体光催化分解水产氢研究现状

硫化锌镉（Cd_1-xZn_xS,0 < x < 1）固溶体因其优异的活性、可调谐的能带结构在光催化分解水制氢领域备受关注,但其较快的光生电荷复合速率和光腐蚀仍阻碍了其进一步应用。因此,研究者们针对其固有缺陷进行了大量改性工作。我们首先简述了光催化反应热力学与动力学特征,随后详细综述了近年来Cd_1-xZn_xS在光解水制氢领域的研究进展,包括其结构调控、异质结构建、杂原子掺杂等方面,简要分析了Cd_1-xZn_xS光催化分解水所面临的挑战和问题,并对近期研究进行了展望。     

Photocatalytic production of hydrogen in systems based on Cd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Zn<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>S/Ni<Superscript>0</Superscript> nanostructures

A relation was established between the composition of Cd _x Zn_1–x S nanoparticles and their ability to accumulate excess negative charge during irradiation. The rate of expenditure of the accumulated charge depends on the composition of the nanoparticles and is determined by their electric capacitance. A correlation was found between the photocatalytic activity of the Cd _x Zn_1–x S nanoparticles in the release of hydrogen from solutions of Na₂SO₃, their composition, and their capacity for photoinduced accumulation of excess charge. It was shown that Ni⁰ nanoparticles photodeposited on the surface of Cd _x Zn_1–x S are effective cocatalysts for the release of hydrogen. It was found that Zn^II additions in photocatalytic systems based on Cd _x Zn_1–x S/Ni⁰ nanostructures have a promoting action on the release of hydrogen from water–ethanol mixtures. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 45, No. 1, pp. 8–16, January-February, 2009.     

Triplet–Triplet Annihilation Upconversion for Photocatalytic Hydrogen Evolution

The solar generation of hydrogen by water splitting provides a promising path for renewable hydrogen production and solar energy storage. Upconversion of low-energy photons into high-energy photons constitutes a promising strategy to enhance the light harvesting efficiency of artificial hydrogen production systems. In the present study, upconversion micelles are integrated with Cd_0.5Zn_0.5S to construct solar energy conversion systems. The upconversion micelle is employed to upconvert red photons to cyan photons. Cd_0.5Zn_0.5S is sensitized by upconverted cyan light to produce hydrogen, but not by incident red light without triplet–triplet annihilation upconversion (TTA-UC). The performance of the upconversion photocatalytic system was dramatically affected by the concentration of Cd_0.5Zn_0.5S and the irradiation intensity. This novel system was able to produce about 2.3 μL hydrogen after 5 h of red light (629 nm) irradiation (2.4 mW cm⁻²). The present study provides a candidate for applications using low-energy photons for solar hydrogen generation.     

Photocatalytic hydrogen production using Me/Cd<Subscript>0.3</Subscript>Zn<Subscript>0.7</Subscript>S (Me = Au,Pt, Pd) catalysts: Transformation of the metallic catalyst under the action of the reaction medium

The activity and stability of Me/Cd_0.3Zn_0.7S (Me = Au, Pt, Pd) photocatalysts in the course of hydrogen production from water under the action of visible radiation have been investigated. The mechanism of activation and deactivation of the catalysts have been elucidated for the first time using X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy. An increase in the hydrogen evolution rate is observed for all of the catalysts at the early stages of testing. The highest hydrogen evolution rate, 5.4 μmol/min, is afforded by the 1%Pt/Cd_0.3Zn_0.7S catalyst. The activity of the Au/Cd_0.3Zn_0.7S and Pt/Cd_0.3Zn_0.7S catalysts becomes constant 7.5–9 h after the beginning of the photocatalytic test, while in the case of Pd/Cd_0.3Zn_0.7S the hydrogen evolution rate increases over the initial 6 h and then decreases. These specific features of the catalysts likely correlate with the initial state of the metals on the support surface. In particular, supported palladium is in the form of PdO, while gold and platinum are in the metallic state. The Au/Cd_0.3Zn_0.7S and Pt/Cd_0.3Zn_0.7S photocatalysts are activated due to metal encapsulation; the 1%Pd/Cd_0.3Zn_0.7S catalyst, due to the partial reduction of PdO to PdO _x . The 1%Pd/Cd_0.3Zn_0.7S catalyst is deactivated because of the aggregation of nanoparticles of the cadmium sulfide–zinc sulfide solid solution.     

A First‐Principles Investigation on Microscopic Atom Distribution and Configuration‐Averaged Properties in Cd1−xZnxS Solid Solutions

The structural, energetic, and electronic properties of zincblende and wurtzite phase Cd_1?xZn_xS (0≤x≤1) solid solutions were investigated by first‐principles calculations. It was revealed that the trend of atom distribution in configurations with the same x value can be quantitatively characterized by the average length of the Zn?S bonds. The origin of this trend was attributed to the strong interaction of the Zn?S bonds, which acted against the aggregation of Zn atoms in this solid solution. By using a configuration‐averaged method, structural and energetic properties were estimated as a function of Zn content at the level of the generalized gradient approximation, whereas electronic properties were corrected by using a hybrid functional. Phase diagrams of both solid solutions were established. An optimal x value of approximately 0.5 for photocatalytic hydrogen production was determined by taking both the band edges and band gaps into consideration; this conclusion was supported by the results of a variety of experiments.     

Rapid Charge Transfer Endowed by Interfacial Ni-O Bonding in S-scheme Heterojunction for Efficient Photocatalytic H2 and Imine Production

Cooperative coupling of H₂ evolution with oxidative organic synthesis is promising in avoiding the use of sacrificial agents and producing hydrogen energy with value-added chemicals simultaneously. Nonetheless, the photocatalytic activity is obstructed by sluggish electron-hole separation and limited redox potentials. Herein, Ni-doped Zn_0.2Cd_0.8S quantum dots are chosen after screening by DFT simulation to couple with TiO₂ microspheres, forming a step-scheme heterojunction. The Ni-doped configuration tunes the highly active S site for augmented H₂ evolution, and the interfacial Ni−O bonds provide fast channels at the atomic level to lower the energy barrier for charge transfer. Also, DFT calculations reveal an enhanced built-in electric field in the heterojunction for superior charge migration and separation. Kinetic analysis by femtosecond transient absorption spectra demonstrates that expedited charge migration with electrons first transfer to Ni²⁺ and then to S sites. Therefore, the designed catalyst delivers drastically elevated H₂ yield (4.55 mmol g⁻¹ h⁻¹) and N-benzylidenebenzylamine production rate (3.35 mmol g⁻¹ h⁻¹). This work provides atomic-scale insights into the coordinated modulation of active sites and built-in electric fields in step-scheme heterojunction for ameliorative photocatalytic performance.     

Photocatalytic hydrogen generation using glucose as electron donor over Pt/Cd x Zn1−x S solid solutions

Cd _x Zn_1?x S solid solution photocatalysts were prepared by a hydrothermal process. The photocatalysts were characterized by X-ray diffraction (XRD), UV–vis diffusive reflectance spectroscopy (DRS), and transmission electron microscope (TEM) measurements. Using glucose as an electron donor, photocatalytic hydrogen generation over Pt/Cd _x Zn_1?x S was investigated. The results show that glucose not only improves the efficiency of photocatalytic hydrogen generation but prevents photocorrosion of Cd _x Zn_1?x S. Glucose was degraded effectively with the hydrogen generation. The factors which affect photocatalytic hydrogen generation, such as composition and structure of Cd _x Zn_1?x S solid solutions, irradiation time, initial concentration of the glucose, and concentration of NaOH were studied.     

Isolated Electron Trap-Induced Charge Accumulation for Efficient Photocatalytic Hydrogen Production

The solar-driven evolution of hydrogen from water using particulate photocatalysts is considered one of the most economical and promising protocols for achieving a stable supply of renewable energy. However, the efficiency of photocatalytic water splitting is far from satisfactory due to the sluggish electron-hole pair separation kinetics. Herein, isolated Mo atoms in a high oxidation state have been incorporated into the lattice of Cd_0.5Zn_0.5S (CZS@Mo) nanorods, which exhibit photocatalytic hydrogen evolution rate of 11.32 mmol g⁻¹ h⁻¹ (226.4 μmol h⁻¹; catalyst dosage 20 mg). Experimental and theoretical simulation results imply that the highly oxidized Mo species lead to mobile-charge imbalances in CZS and induce the directional photogenerated electrons transfer, resulting in effectively inhibited electron-hole recombination and greatly enhanced photocatalytic efficiency.     

Photocatalytic intercalated material based on HLaNb<Subscript>2</Subscript>O<Subscript>7</Subscript> as host and Cd<Subscript>0.8</Subscript>Zn<Subscript>0.2</Subscript>S as guest

A novel photocatalytic material (Pt,Cd0.8Zn0.2S)/HLaNb2O7 was fabricated by successive intercalation and exchange reactions. The (Pt,Cd0.8Zn0.2S)/HLaNb2O7 possessed a gallery height less than 0.5 nm and showed a broad absorption with wavelength over 370-500 nm. Using (Pt,Cd0.8Zn0.2S)/HLaNb2O7 as catalyst, the photocatalytic H2 evolution was more than 160 cm3·h-1·g-1 in the presence of Na2S as a sacrificial agent under irradiation with wavelength more than 290 nm from a 100-W mercury lamp. Furthermore, the catalyst showed photocatalytic activity even under visible light irradiation.     

Template‐Free Synthesis of Nanorod‐Assembled Hierarchical Zn1−xMnxS Hollow Nanostructures with Enhanced Pseudocapacitive Properties

Mixed‐metal sulfide Zn_1?xMn_xS nanorod‐assembled hierarchical hollow spheres were synthesized by a template‐free solvothermal process based on Ostwald ripening. In the reaction system, glycerol plays a key role in the formation of Zn_xMn_1?xS hierarchical hollow structures by a quasi‐microemulsion‐template mechanism. When applied as capacitor electrode material, the hierarchical Zn_1?xMn_xS hollow spheres show excellent electrochemical performance. Specifically, Zn_0.25Mn_0.75S hollow spheres can deliver a high specific capacitance of 664 F g^?1 at a current rate of 1 A g^?1, which is almost five times of that of MnS under the same conditions and higher than those of previously reported single Mn‐based compounds.     

A novel two‐dimensional zinc(II) coordination polymer with 6‐mercaptonicotinic acid

The novel title Zn^II coordination polymer, poly[bis(μ‐6‐thioxo‐1,6‐dihydropyridine‐3‐carboxylato‐κ²S:O)zinc(II)], [Zn(C₆H₄NO₂S)₂]_n, consists of two crystallographically independent zinc centers and two 6‐mercaptonicotinate (Hmna⁻) ligands. Each Zn^II atom is four‐coordinated and lies at the center of a distorted tetrahedral ZnS₂O₂ coordination polyhedron, bridged by four Hmna⁻ ligands to form a two‐dimensional (4,4)‐network. Each Hmna⁻ ion acts as a bridging bidentate ligand, coordinating to two Zn^II atoms through the S atom and a carboxyl O atom. The metal centers reside on twofold rotation axes. The coordination mode of the S atoms and N—H...O hydrogen‐bonding interactions between the protonated N atoms and the uncoordinated carboxyl O atoms give the extended structure a wavelike form.