Superprotonic Conductivity in Flexible Porous Covalent Organic Framework Membranes

Poor mechanical stability of the polymer electrolyte membranes remains one of the bottlenecks towards improving the performance of the proton exchange membrane (PEM) fuel cells. The present work proposes a unique way to utilize crystalline covalent organic frameworks (COFs) as a self‐standing, highly flexible membrane to further boost the mechanical stability of the material without compromising its innate structural characteristics. The as‐synthesized p‐toluene sulfonic acid loaded COF membranes (COFMs) show the highest proton conductivity (as high as 7.8×10⁻² S cm⁻¹) amongst all crystalline porous organic polymeric materials reported to date, and were tested under real PEM operating conditions to ascertain their practical utilization as proton exchange membranes. Attainment of 24 mW cm⁻² power density, which is the highest among COFs and MOFs, highlights the possibility of using a COF membrane over the other state‐of‐the‐art crystalline porous polymeric materials reported to date.     

Oriented Two‐Dimensional Porous Organic Cage Crystals

The formation of two‐dimensional (2D) oriented porous organic cage crystals (consisting of imine‐based tetrahedral molecules) on various substrates (such as silicon wafers and glass) by solution‐processing is reported. Insight into the crystallinity, preferred orientation, and cage crystal growth was obtained by experimental and computational techniques. For the first time, structural defects in porous molecular materials were observed directly and the defect concentration could be correlated with crystal growth rate. These oriented crystals suggest potential for future applications, such as solution‐processable molecular crystalline 2D membranes for molecular separations.     

Odd–Even Alternation in Tautomeric Porous Organic Cages with Exceptional Chemical Stability

Amine‐linked (C−NH) porous organic cages (POCs) are preferred over the imine‐linked (C=N) POCs owing to their enhanced chemical stability. In general, amine‐linked cages, obtained by the reduction of corresponding imines, are not shape‐persistent in the crystalline form. Moreover, they require multistep synthesis. Herein, a one‐pot synthesis of four new amine‐linked organic cages by the reaction of 1,3,5‐triformylphloroglucinol (Tp) with different analogues of alkanediamine is reported. The POCs resulting from the odd diamine (having an odd number of −CH₂ groups) is conformationally eclipsed, while the POCs constructed from even diamines adopt a gauche conformation. This odd–even alternation in the conformation of POCs has been supported by computational calculations. The synthetic strategy hinges on the concept of Schiff base condensation reaction followed by keto–enol tautomerization. This mechanism is the key for the exceptional chemical stability of cages and facilitates their resistance towards acids and bases.     

A Modulator‐Induced Defect‐Formation Strategy to Hierarchically Porous Metal–Organic Frameworks with High Stability

The pore size enlargement and structural stability have been recognized as two crucial targets, which are rarely achieved together, in the development of metal–organic frameworks (MOFs). Herein, we have developed a versatile modulator‐induced defect‐formation strategy, in the presence of monocarboxylic acid as a modulator and an insufficient amount of organic ligand, successfully realizing the controllable synthesis of hierarchically porous MOFs (HP‐MOFs) with high stability and tailorable pore characters. Remarkably, the integration of high stability and large mesoporous property enables these HP‐MOFs to be important porous platforms for applications involving large molecules, especially in catalysis.     

Highly Porous Thermoelectric Nanocomposites with Low Thermal Conductivity and High Figure of Merit from Large‐Scale Solution‐Synthesized Bi2Te2.5Se0.5 Hollow Nanostructures

To enhance the performance of thermoelectric materials and enable access to their widespread applications, it is beneficial yet challenging to synthesize hollow nanostructures in large quantities, with high porosity, low thermal conductivity (κ ) and excellent figure of merit (z T ). Herein we report a scalable (ca. 11.0 g per batch) and low‐temperature colloidal processing route for Bi₂Te_2.5Se_0.5 hollow nanostructures. They are sintered into porous, bulk nanocomposites (phi 10 mm×h 10 mm) with low κ (0.48 W m⁻¹ K⁻¹) and the highest z T (1.18) among state‐of‐the‐art Bi₂Te_3−x Se_x materilas. Additional benefits of the unprecedented low relative density (68–77 %) are the large demand reduction of raw materials and the improved portability. This method can be adopted to fabricate other porous phase‐transition and thermoelectric chalcogenide materials and will pave the way for the implementation of hollow nanostructures in other fields.     

Eosin Y‐Functionalized Conjugated Organic Polymers for Visible‐Light‐Driven CO2 Reduction with H2O to CO with High Efficiency

Visible‐light‐driven photoreduction of CO₂ to energy‐rich chemicals in the presence of H₂O without any sacrifice reagent is of significance, but challenging. Herein, Eosin Y‐functionalized porous polymers (PEosinY‐N, N=1–3), with high surface areas up to 610 m² g^?1, are reported. They exhibit high activity for the photocatalytic reduction of CO₂ to CO in the presence of gaseous H₂O, without any photosensitizer or sacrifice reagent, and under visible‐light irradiation. Especially, PEosinY‐1 derived from coupling of Eosin Y with 1,4‐diethynylbenzene shows the best performance for the CO₂ photoreduction, affording CO as the sole carbonaceous product with a production rate of 33 μmol g^?1 h^?1 and a selectivity of 92 %. This work provides new insight for designing and fabricating photocatalytically active polymers with high efficiency for solar‐energy conversion.     

Docking Strategy To Construct Thermostable,Single‐Crystalline,Hydrogen‐Bonded Organic Framework with High Surface Area

Enhancing thermal and chemical durability and increasing surface area are two main directions for the construction and improvement of the performance of porous hydrogen‐bonded organic frameworks (HOFs). Herein, a hexaazatriphenylene (HAT) derivative that possesses six carboxyaryl groups serves as a suitable building block for the systematic construction of thermally and chemically durable HOFs with high surface area through shape‐fitted docking between the HAT cores and interpenetrated three‐dimensional network. A HAT derivative with carboxybiphenyl groups forms a stable single‐crystalline porous HOF that displays protic solvent durability, even in concentrated HCl, heat resistance up to 305 °C, and a high Brunauer–Emmett–Teller surface area [SA_(BET)] of 1288 m² g⁻¹. A single crystal of this HOF displays anisotropic fluorescence, which suggests that it would be applicable to polarized emitters based on robust functional porous materials.     

Highly Crystalline Mesoporous Phosphotungstic Acid: A High‐Performance Electrode Material for Energy‐Storage Applications

Heteropoly acids (HPAs) are unique materials with interesting properties, including high acidity and proton conductivity. However, their low specific surface area and high solubility in polar solvents make them unattractive for catalytic or energy applications. This obstacle can be overcome by creating nanoporosity within the HPA. We synthesized mesoporous phosphotungstic acid (mPTA) with a spherical morphology through the self‐assembly of phosphotungstic acid (PTA) with a polymeric surfactant as stabilized by KCl and hydrothermal treatment. The mPTA nanostructures had a surface area of 93 m² g^?1 and a pore size of 4 nm. Their high thermal stability (ca. 450 °C) and lack of solubility in ethylene carbonate/diethyl carbonate (EC/DEC) electrolyte are beneficial for lithium‐ion batteries (LIBs). Optimized mPTA showed a reversible capacity of 872 mAh g^?1 at 0.1 A g^?1 even after 100 cycles for LIBs, as attributed to a super‐reduced state of HPA and the storage of Li ions within the mesochannels of mPTA.     

Introduction of H2SO4 and H3PO4 into Crystalline Porous Organic Salts(CPOS-1) for Outstanding Proton Conductivity

To improve the proton conduction of crystalline porous organic salts(CPOS-1), H₂SO₄ and H₃PO₄ were introduced into the channel to obtain H₂SO₄@CPOS-1 and H₃PO₄@CPOS-1. Compared to CPOS-1, the proton conductivities of H₂SO₄@CPOS-1 and H₃PO₄@CPOS-1 increased two orders of magnitude and one order of magnitude at 303 K and 100% RH, respectively. It can be attributed to the increasing concentration of the protons, which dissociates from the acids.     

Reduced SnO2 Porous Nanowires with a High Density of Grain Boundaries as Catalysts for Efficient Electrochemical CO2‐into‐HCOOH Conversion

Electrochemical conversion of CO₂ into energy‐dense liquids, such as formic acid, is desirable as a hydrogen carrier and a chemical feedstock. SnO_x is one of the few catalysts that reduce CO₂ into formic acid with high selectivity but at high overpotential and low current density. We show that an electrochemically reduced SnO₂ porous nanowire catalyst (Sn‐pNWs) with a high density of grain boundaries (GBs) exhibits an energy conversion efficiency of CO₂‐into‐HCOOH higher than analogous catalysts. HCOOH formation begins at lower overpotential (350 mV) and reaches a steady Faradaic efficiency of ca. 80 % at only −0.8 V vs. RHE. A comparison with commercial SnO₂ nanoparticles confirms that the improved CO₂ reduction performance of Sn‐pNWs is due to the density of GBs within the porous structure, which introduce new catalytically active sites. Produced with a scalable plasma synthesis technology, the catalysts have potential for application in the CO₂ conversion industry.     

Synthesis of Hierarchical Porous Metals Using Ionic‐Liquid‐Based Media as Solvent and Template

It was found that nanodomains existed in the ionic liquid (IL)‐based ternary system containing IL 1‐ethyl‐3‐methylimidazole tetrafluoroborate (EmimBF₄), IL 1‐decyl‐3‐methylimidazole nitrate (DmimNO₃) and water, and the size distribution of the domains varied continuously with the composition of the solution. A strategy to synthesize hierarchical porous metals using IL‐based media as solvent and template is proposed, and the hierarchical porous Ru and Pt metals were prepared by the assembly of metal clusters of about 1.5 nm using this new method. It is demonstrated that the metals have micropores and mesopores, and the size distribution is tuned by controlling the composition of the solution. Porous Ru was used for a series of hydrogenation reactions. It has an outstanding catalytic performance owing to its special morphology and structure.