Highly selective photoinduced perfluoroalkylation of vinylsilanes and its application to synthesis of water-shedding polysilanes

The functionalization of polysilanes is an important subject in materials science because functionalized polysilanes are expected to exhibit potentially innovative properties. This research aims at the addition of a water-shedding property to polysilanes by introducing perfluoroalkyl groups into their skeleton. The photoinduced iodoperfluoroalkylation of various vinylsilanes takes place successfully upon irradiation with a xenon lamp: vinylmonosilanes undergo iodoperfluoroalkylation with perfluoroalkyl iodides (R_fI) regioselectively, and the corresponding perfluoroalkylated silanes are obtained in moderate to high yields. Detailed optimization of the photoinduced iodoperfluoroalkylation has been investigated to apply this method to the functionalization of polysilanes. Polysilanes having vinyl groups can be synthesized by the reductive coupling of dichlorovinylsilanes with samarium diiodide (SmI₂) and samarium metal (Sm) upon irradiation with visible light. The synthesized vinylpolysilanes and R_fI (about 1.0 mM CHCl₃ solution) are coated on a glass plate sequentially, and then the following photoirradiation with light of a wavelength over 300 nm successfully adds an excellent water-shedding property to the glass plate.     

An efficient photoinduced iodoperfluoroalkylation of carbon-carbon unsaturated compounds with perfluoroalkyl iodides

Dependent on the selection of the light sources employed, the photoinduced iodoperfluoroalkylation of a variety of unsaturated compounds takes place efficiently via a radical mechanism. Upon irradiation with a xenon lamp through Pyrex (hnu >300 nm), terminal alkenes (R-CH=CH2) and alkynes (R-C triple bond CH) undergo iodoperfluoroalkylation with perfluoroalkyl iodides (RF-I) regioselectively, providing R-CH(I)-CH2-RF and R-C(I)=CH-RF, respectively. In the case of terminal allenes (R-CH=C=CH2), the photoinduced iodoperfluoroalkylation occurs selectively at the terminal double bond, giving the corresponding beta-perfluoroalkylated vinylic iodides (R-CH=C(I)-CH2-RF) in good yields. The photoinitiated reaction of vinylcyclopropanes (c-C3H5-C(R)=CH2) with RF-I proceeds via the rearrangement of cyclopropylcarbinyl radical intermediates to the homoallylic radical intermediates, and the corresponding 1,5-iodoperfluoroalkylated products (I-(CH2)2CH=C(R)-CH2-RF) are obtained in high yields. Isocyanides (R-NC), as C-N unsaturated compounds, also undergo the xenon-lamp-irradiated iodoperfluoroalkylation to provide the corresponding 1,1-adducts (R-N=C(I)-RF) in good yields. Furthermore, the present photoinitiation procedure can be applied to the iodotrifluoromethylation of unsaturated compounds, when the xenon-lamp-irradiated reactions are conducted under the refluxing conditions of excess CF3-I.     

Perfluoroalkylation of Alkenes by Frustrated Lewis Pairs

The activation of perfluoroalkyl iodides by the frustrated Lewis pair tris(pentafluorophenyl)borane and tri‐tert‐butylphosphine is described. By abstraction of both a fluorine and an iodine atom, an iodophosphonium fluoroborate salt is formed. In the presence of alkenes the corresponding iodoperfluoroalkylation products are generated regioselectively. First mechanistic investigations support a radical mechanism.     

Regioselective ring cleavage of chiral β-trichloromethyl-β-propiolactone with organoaluminum compounds for the synthesis of optically active intermediates

A novel alkylating ring cleavage reaction of enantiomerically pure β-trichloromethyl-β-propiolactone as a chiral building block with organoaluminum compounds provided ring-opened products with a chiral trichloromethyl carbinol moiety. A product was demonstrated to be used as an effective chiral synthon for the synthesis of chiral bioactive derivatives such as ipsdienol and sodium cilastatin.     

Catalytic Enantioselective Amination of Alcohols by the Use of Borrowing Hydrogen Methodology: Cooperative Catalysis by Iridium and a Chiral Phosphoric Acid

The catalytic asymmetric reduction of ketimines has been explored extensively for the synthesis of chiral amines, with reductants ranging from Hantzsch esters, silanes, and formic acid to H₂ gas. Alternatively, the amination of alcohols by the use of borrowing hydrogen methodology has proven a highly atom economical and green method for the production of amines without an external reductant, as the alcohol substrate serves as the H₂ donor. A catalytic enantioselective variant of this process for the synthesis of chiral amines, however, was not known. We have examined various transition‐metal complexes supported by chiral ligands known for asymmetric hydrogenation reactions, in combination with chiral Brønsted acids, which proved essential for the formation of the imine intermediate and the transfer‐hydrogenation step. Our studies led to an asymmetric amination of alcohols to provide access to a wide range of chiral amines with good to excellent enantioselectivity.     

Aluminum-catalyzed asymmetric alkylations of pyridyl-substituted alkynyl ketones with dialkylzinc reagents

Alkylations of pyridyl-substituted ynones with Et2Zn and Me2Zn, promoted by amino acid-based chiral ligands in the presence of Al-based alkoxides, afford tertiary propargyl alcohols efficiently in 57% to >98% ee. Two easily accessible chiral ligands are identified as optimal for reactions of the two dialkylzinc reagents. Catalytic alkylations with Et2Zn require a chiral ligand carrying two amino acid moieties (valine and phenylalanine) along with a p-trifluoromethylphenylamide C-terminus. In contrast, reactions with Me2Zn are most effectively promoted in the presence of a chiral ligand containing a single amino acid (benzyl cysteine), capped by an n-butylamide. Enantiomerically enriched tertiary alcohols bearing a pyridyl and an alkyne substituent can be functionalized in a variety of manners to furnish a wide range of difficult-to-access acyclic and heterocyclic structures; two noteworthy examples are Cu-catalyzed protocols for conversion of tertiary propargyl alcohols to enantiomerically enriched tetrasubstituted allenes and bicyclic amides that bear an N-substituted quaternary carbon stereogenic center. Mechanistic models that account for the trends and enantioselectivity levels are provided.     

Use of a chiral surfactant for enantioselective reduction of a ketone

The influence of a chiral surfactant and a polymer-supported chiral additive on reduction of ketones using sodium borohydride will be described. Initial preparations involved methylation of (S)-leucinol to give (2S)-N , N-dimethyl-2-amino-4-methyl-1-pentanol (1) (67%). The chiral surfactant (2) was synthesized by reacting (1) with bromohexadecane (71%). The functionalized styrene for the polymer-supported chiral additive (5) was synthesized by reacting (1) with 4-vinylbenzyl chloride. Polymerization was carried out with 10% of the functionalized monomer (4), 5% cross-linking agent divinylbenzene, and 85% styrene with AIBN as the initiator. The activity of the chiral surfactant and polymeric additive were examined by using them as additives in a standard reduction of 2-pentanone with sodium borohydride to yield (R)- and (S)-2-pentanol (3) (20%). The resulting alcohol was analyzed by polarimetry (ee 9.5%) and also esterified with (2S)-methylbutyric acid prior to characterization by NMR. 13C NMR indicated an enantiomeric excess of 5.2% when the chiral surfactant was used, and 7% when the polymeric additive was used.     

Synthesis of Novel Chiral Dibenzo [ a, c ] cycloheptadiene Bis(oxazoline) and Catalytic Asymmetric Reactions

Over the last decade, C2-symmetric chiral oxazoline metal complexes have been recognized as an effective classof chiral catalyst in a variety of transition metal catalyzed asymmetric reactions. [1] High catalytic activities and enantiomeric excesses have been obtained using C2-symmetric chiral ligands in conjunction with suitable transition metal ion, for example, the hydrosilylation of ketone, allylic alkylation, Michael addition, Diels-Alder cycloaddition, and cyclopropanation. Thus, the design and synthesis of new chiral oxazoline ligands have inspired many scientists to work with great efforts.     

The chiral recognition of guest molecules in trio-o-thymotide clathrates: A semi-empirical approach. Preliminary communication

The enantiomers of a chiral solvent can be enclathrated to a different extent in a crystal lattice consisting of tri-o-thymotide ( 1 ) molecules of a given handedness. This property affords a mean of studying the stereoselective interaction of a chiral environment with an enclosed chiral component. The general approach to account for the observed differences in stereoselectivity is based on the calculation and comparison of the minimum energies for the respective inclusion of enantiomeric guest molecules within a rigid cage of given chirality. An interpretation of the fair chiral recognition of 2-bromobutane as opposed to the unselective inclusion of 2-butanol is attempted.     

麦草伏甲酯对对映体的高效液相色谱分离

手性分离;麦草伏甲酯对对映体的高效液相色谱分离     

Chiral recognition based on the kinetics of ion transfers across liquid/liquid interface

Three-phase electrodes in combination with square-wave voltammetry are applied to study the transfer kinetics of chiral anions from water to the chiral 2-octanol. The experimental system used consists of a pyrolytic graphite electrode partly modified with a thin film of one of the enantiomers of 2-octanol, which was immersed into an aqueous solution containing anions of chiral 2-chloropropionic acid, 2-bromopropionic acid, or lactic acid. It is demonstrated that the kinetics of the ion transfer is a stereoselective. The rate of the ion transfer is higher when uncomplimentary transferring ion–solvent chiral isomers are used, i.e., (R)-ion and (S)-solvent, or (S)-ion and (R)-solvent. To the best of our knowledge this is the first evidence for the difference in the ion transfer kinetics of chiral isomers across water/chiral organic solvent interface.     

纤维素苯基氨基甲酸酯的均相合成及其手性拆分性能评价

认识多糖类手性拆分材料的结构性能关系对于构建新型高效手性固定相具有重要指导意义。该文中,以1-烯丙基-3-甲基咪唑氯离子液体为介质,合成了系列不同结构的纤维素苯基氨基甲酸酯,进而考察了取代度、取代基团种类和位置对产物手性拆分性能的影响。结果表明,随着取代度的增加,纤维素苯基氨基甲酸酯对于绝大部分手性分子的拆分效果提高;苯环上取代基团的种类和位置对纤维素苯基氨基甲酸酯手性拆分性能影响显著,弱吸电子基团氯基和给电子基团甲基在合适的位置能显著增强纤维素苯基氨基甲酸酯的手性拆分性能;纤维素3-甲基-4-氯苯基氨基甲酸酯、3,5-二氯苯基氨基甲酸酯和2-甲基-5-氯苯基氨基甲酸酯对一些手性分子的拆分效果优于纤维素3,5-二甲基苯基氨基甲酸酯。     

Organocatalytic Atroposelective Arylation of 2‐Naphthylamines as a Practical Approach to Axially Chiral Biaryl Amino Alcohols

The first phosphoric acid catalyzed direct arylation of 2‐naphthylamines with iminoquinones for the atroposelective synthesis of axially chiral biaryl amino alcohols has been developed. This reaction constitutes a highly functional‐group‐tolerant route for the rapid construction of enantioenriched axially chiral biaryl amino alcohols, and is a rare example of 2‐naphthylamines acting as nucleophiles in an organocatalytic enantioselective transformation. Furthermore, the products, which feature various halogen atoms, provide access to structurally diverse axially chiral amino alcohols through further transformations.     

Helix formation of poly(phenylacetylene) derivatives bearing amino groups at the meta position induced by optically active carboxylic acids

Two novel phenylacetylene derivatives bearing diethylaminomethyl groups at the meta position on phenyl groups [3‐(N,N‐diethylaminomethyl)phenyl]acetylene ( 1 ) and [3,5‐bis(N,N‐diethylaminomethyl)phenyl]acetylene ( 2 ) were synthesized and polymerized with [Rh(nbd)Cl]₂ (nbd: norbornadiene). Both monomers gave highly cis–transoidal stereoregular polymers that exhibited an induced circular dichroism (ICD) in the UV–visible region, probably because of a prevailing one‐handed helical conformation upon complexation with optically active carboxylic acids such as mandelic acid and lactic acid. The sign of the Cotton effects reflected the absolute configuration of the chiral acids. Therefore, these polymers can be used as a novel probe for determining the configuration of chiral acids. The polymers were stable in the presence of chiral acids in solution. The poly‐ 1 complexed with chiral acids exhibited a split‐type ICD, whereas the poly‐ 2 complexed with chiral acids showed a different, non‐split‐type ICD. The ICD pattern of the poly‐ 1 /chiral acids complexes dramatically changed with an increase in the concentration of the chiral acids, thus showing a non‐split‐type ICD similar to those of the poly‐ 2 /chiral acid complexes. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3180–3189, 2001     

直链淀粉手性固定相对8种外消旋硫代缩水甘油醚的直接拆分

利用高效液相色谱进行不对称拆分是十分有效的方法,其中多糖类手性固定相是非常重要的一种,它主要包括纤维素和淀粉两大类,Ｏｋａｍｏｔｏ等［１～３］合成了大量的纤维素和直链淀粉的衍生物,并将其涂敷在大孔硅胶表面,从而制备了手性拆分能力较强的多种固定相,这类...     

New chiral ionic liquids based on imidazolinium salts

The preparation and application of a new series of chiral ionic liquids are described. The salts are based on imidazolinium cations. Some of the cations also incorporated an axial chirality at the C(2) position next to the central chirality. These cations display a very high rotational barrier along the arene–imidazolinium axis. Furthermore, an analogue with a chiral anion was prepared. The salts have low melting points. Their potential as solvents and as chiral shift reagents was explored, resulting for the first time in an example of a chiral ionic liquid as a shift reagent for a neutral compound.     

Chiral anion-mediated asymmetric ring opening of meso-aziridinium and episulfonium ions

Reactions proceeding through cationic intermediates that lack a Lewis or Br?nsted basic site present a challenge for traditional asymmetric catalysis based on chiral metals or organocatalysts. We present an enantioselective ring opening of tetrasubstituted meso-aziridinium ions with alcohol nucleophiles proceeding through a chiral ion pair with a binaphthol-phosphate anion. The reaction is initiated by silver-induced ring closure of beta-chloroamines using the Ag salt of the chiral anion as in situ generated catalyst. Use of insoluble Ag2CO3 as silver source is essential to obtain high enantioselectivity; we believe the chiral phosphate acts as a "chiral anion phase transfer catalyst" to bring silver ion into the organic phase. The chiral anion concept can also be extended to the related asymmetric opening of meso-episulfonium ions generated by protonation of trichloroacetimidates vicinal to sulfides.     

Chiral separation of gamma-butyrolactone derivatives by gas chromatography on 2,3-di-O-methyl-6-O-tert.-butyldimethylsilyl-beta-cyclodextrin

The chiral GC separation of 2-alkyl-2-keto-gamma-butyrolactone derivatives and their alcohol analogs using 2,3-di-O-methyl-6-O-tert.-butyldimethylsilyl-beta-cyclodextrin (DIMETBCD) as chiral selector was discussed. The results, supported by the ketone preliminary molecular modelling calculations, suggest that the chiral recognition for DIMETBCD depends more on the geometry than on the polarity of the alkyl substituents on the butyrolactones. Hydrogen bonds and alkyl group steric effects should be an important function of the alcohol chiral recognition for DIMETBCD. Comparison of the retention times of the alcohol derivatives, in achiral and chiral stationary phases, suggests a specific structural effect for the cyclodextrin selctor.     

Chiral recognition: design and preparation of chiral stationary phases using selectors derived from ugi multicomponent condensation reactions and a combinatorial approach

Combinatorial approaches together with high-throughput screening have been used to develop highly selective stationary phases for chiral recognition. Libraries of potential chiral selectors have been prepared by the Ugi multicomponent condensation reactions and screened for their enantioselectivity using the reciprocal approach involving a chiral stationary phase with immobilized model target compound N-(3,5-dinitrobenzoyl)-alpha-l-leucine. The best candidates were identified from the library of phenyl amides of 2-oxo-azetidineacetic acid derivatives. This screening also enabled specification of the functionalities of the selector desired to achieve the highest level of chiral recognition. The substituents of the phenyl ring adjacent to the chiral center of the selector candidates exhibited the most profound effect on the chiral recognition. The best candidate was then synthesized on a larger scale, resolved into single enantiomers using preparative enantioselective HPLC, and attached to porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) beads via an ester linkage to afford the desired stationary phase. Selectivities alpha as high as 3.2 were found for the separation of a variety of amino acid derivatives.     

Chiral ionic liquids for enantioseparation of pharmaceutical products by capillary electrophoresis

A chiral ionic liquid (IL), S-[3-(chloro-2-hydroxypropyl)trimethylammonium] [bis((trifluoromethyl)sulfonyl)amide] (S-[CHTA](+)[Tf(2)N](-)), which can be easily and readily synthesized in a one-step process from commercially available reagents, can be successfully used both as co-electrolyte and as a chiral selector for CE. A variety of pharmaceutical products including atenolol, propranolol, warfarin, indoprofen, ketoprofen, ibuprofen and flurbiprofen, can be successfully and baseline separated with the use of this IL as electrolyte. Interestingly, while S-[CHTA](+)[Tf(2)N](-) can also serve as a chiral selector, enantioseparation cannot be successfully achieved with S-[CHTA](+)[Tf(2)N](-) as the only chiral selector. In the case of ibuprofen, a second chiral selector, namely a chiral anion (sodium cholate), is needed for the chiral separation. For furbiprofen, in addition to S-[CHTA](+)[Tf(2)N](-) and sodium cholate, a third and neutral chiral selector, 1-S-octyl-beta-d-thioglucopyranoside (OTG), is also needed. Due to the fact that the chirality of this chiral IL resides on the cation (i.e., -[CHTA](+)), and that needed additional chiral selector(s) are either chiral anion (i.e., cholate) or chiral neutral compound (OTG), the results obtained seem to suggest that additional chiral selector(s) are needed to provide the three-point interactions needed for chiral separations.