Synthesis,Structure, and Photoluminescence Properties of Novel KBaSc2(PO4)3:Ce3+/Eu2+/Tb3+ Phosphors for White‐Light‐Emitting Diodes

A series of novel KBaSc₂(PO₄)₃:Ce³⁺/Eu²⁺/Tb³⁺phosphors are prepared using a solid‐state reaction. X‐ray diffraction analysis and Rietveld structure refinement are used to check the phase purity and crystal structure of the prepared samples. Ce³⁺‐ and Eu²⁺‐doped phosphors both have broad excitation and emission bands, owing to the spin‐ and orbital‐allowed electron transition between the 4f and 5d energy levels. By co‐doping the KBaSc₂(PO₄)₃:Eu²⁺ and KBaSc₂(PO₄)₃:Ce³⁺ phosphors with Tb³⁺ ions, tunable colors from blue to green can be obtained. The critical distance between the Eu²⁺ and Tb³⁺ ions is calculated by a concentration quenching method and the energy‐transfer mechanism for Eu²⁺→Tb³⁺ is studied by utilizing the Inokuti–Hirayama model. In addition, the quantum efficiencies of the prepared samples are measured. The results indicate that KBaSc₂(PO₄)₃:Eu²⁺,Tb³⁺ and KBaSc₂(PO₄)₃:Ce³⁺,Tb³⁺ phosphors might have potential applications in UV‐excited white‐light‐emitting diodes.     

La7O6(BO3)(PO4)2:Eu3+/Tb3+荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La₇O₆（BO₃）（PO₄）₂：Eu³⁺材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为⁵D₀→⁷F₂特征能级跃迁,Eu³⁺的最优掺杂浓度为0.08,对应的CIE坐标为（0.610 2,0.382 3）;La₇O₆（BO₃）（PO₄）₂：Tb³⁺材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb³⁺的⁵D₄→⁷F₅能级跃迁,Tb³⁺离子的最优掺杂浓度为0.15,对应的CIE坐标为（0.317 7,0.535 2）。此外,对2种材料的变温光谱分析发现Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂荧光材料均具有良好的热稳定性。     

Optical characteristics of europium and terbium doped strontium orthogermanate phosphors

In this work, europium and terbium activated Sr₂GeO₄ phosphors were successfully developed by traditional solid state method. Powders XRD, FESEM, EDS, FTIR, DRS and PL techniques have been used to probe the as prepared phosphors. Powder XRD patterns of the phosphors are indexed. The elemental composition of phosphors was obtained from their EDS. FTIR spectra are employed to detect different vibrational groups in phosphor compositions. The DRS profiles of both pristine and Eu³⁺ (Tb³⁺) substituted samples exhibit broad and strong band in the 230–370 ​nm region. The photoluminescence studies of europium and terbium doped phosphors exhibited optimistic red emission at 617 ​nm (⁵D₀ → ⁷F₂ of Eu³⁺ ions) and intense green emission at 543 ​nm (⁵D₄ → ⁷F₅ of Tb³⁺ ions) upon ultraviolet (UV) excitations respectively. The CIE chromaticity co-ordinates are produced in deep red and green regions. Therefore, these materials may become potential alternatives for red and green phosphors in the display devices and in lamp industry.     

Struktur‐ und magnetochemische Untersuchungen an den ternären Phosphaten Ba2MII(PO4)2 (MII = Mn,Co) und Strukturverfeinerung von BaNi2(PO4)2

Structural and Magnetochemical Studies at the Ternary Phosphates Ba₂M^II(PO₄)₂ (M^II = Mn, Co) and Refinement of the Crystal Structure of BaNi₂(PO₄)₂ Single crystals of the following phosphates were grown by the floating zone technique using a mirror furnace and their crystal structures refined (0,02 < R₁ < 0,04 and 0,04 < wR₂ < 0,10, resp.): Ba₂Mn(PO₄)₂ (a = 531.1(1), b = 896.8(1), c = 1625.6(3) pm, β = 90.26(1)°), Ba₂Co(PO₄)₂ (a = 529.8(1), b = 884.4(1), c = 1614.4(3) pm, β = 90.68(2)°) and BaNi₂(PO₄)₂ (a = 480.0(1), c = 2327.3(5) pm, Z = 3, space group R3). Both compounds Ba₂M^II(PO₄)₂ crystallize with Z = 4 in space group P2₁/n of the monoclinic Ba₂Ni(PO₄)₂ type; BaNi₂(PO₄)₂ has the hexagonal‐rhombohedral structure of the BaNi₂(AsO₄)₂ type. Magnetic measurements of powders of Ba₂Mn(PO₄)₂ and Ba₂Co(PO₄)₂ yielded room temperature moments of μ_eff = 5,73 and 4,93 μ_B, resp., but only the manganese compound obeys the Curie‐Weiss law down to low temperatures. Weak antiferromagnetic interactions at both compounds only near T_M ≈ 5 K lead to a reciprocal susceptibility minimum.     

Analysis of Ligand Field Effects in Europium(III) Phosphates

Optical spectra (powder reflectance, UV/Vis/NIR region), and temperature dependent magnetic behavior (χ, μ/μ_B) were recorded for the series of anhydrous europium(III) phosphates Eu^III₃O₃(PO₄), Eu^IIIPO₄, Eu^III₂P₄O₁₃, lt- and ht-Eu^III(PO₃)₃, and Eu^IIIP₅O₁₄. By modeling within the AOM framework, the experimental data can be related to the ligand-field splitting experienced by the Eu³⁺ ions in the various mainly low-symmetry coordination environments. Our study confirms the well-established relation e_σ(Eu³⁺–O^2–) ~ d(Eu³⁺–O^2–)^–7.0 between the AOM parameter and the interatomic distance. In addition it is shown that e_σ(Eu³⁺–O^2–) depends strongly on the highly variable polarizability of the oxygen ligator atoms. This polarizability can be related to the optical basicity Λ of the various phosphates.     

A new disordered langbeinite‐type compound,K2Tb1.5Ta0.5P3O12, and Eu3+‐doped multicolour light‐emitting properties

For the first time, a new langbeinite‐type phosphate, namely potassium terbium tantalum tris(phosphate), K₂Tb_1.5Ta_0.5(PO₄)₃, has been prepared successfully using a high‐temperature flux method and has been structurally characterized by single‐crystal X‐ray diffraction. The results show that its structure can be described as a three‐dimensional open framework of [Tb_1.5Ta_0.5(PO₄)₃]_∞ interconnected by K⁺ ions. The Tb^III and Ta^V cations in the structure are disordered and occupy the same crystallographic sites. The IR spectrum, the UV–Vis spectrum, the morphology and the Eu³⁺‐activated photoluminescence spectroscopic properties were studied. A series of Eu³⁺‐doped phosphors, i.e. K₂Tb_1.5–xTa_0.5(PO₄)₃:xEu³⁺ (x = 0.01, 0.03, 0.05, 0.07, 0.10), were prepared via a solid‐state reaction and the photoluminescence properties were studied. The results show that under near‐UV excitation, the luminescence colour can be tuned from green through yellow to red by simply adjusting the Eu³⁺ concentration from 0 to 0.1, because of the efficient Tb³⁺→Eu³⁺ energy‐transfer mechanism.     

Eu2+ & Mn2+‐Coactivated Ba3Gd(PO4)3 Orange‐Yellow‐Emitting Phosphor with Tunable Color Tone for UV‐Excited White LEDs

A novel orange‐yellow‐emitting Ba₃Gd(PO₄)₃:x Eu²⁺,y Mn²⁺ phosphor is prepared by high‐temperature solid‐state reaction. The crystal structure of Ba₃Gd(PO₄)₃:0.005 Eu²⁺,0.04 Mn²⁺ is determined by Rietveld refinement analysis on powder X‐ray diffraction data, which shows that the cations are disordered on a single crystallographic site and the oxygen atoms are distributed over two partially occupied sites. The photoluminescence excitation spectra show that the developed phosphor has an efficient broad absorption band ranging from 230 to 420 nm, perfectly matching the characteristic emission of UV‐light emitting diode (LED) chips. The emission spectra show that the obtained phosphors possess tunable color emissions from yellowish‐green through yellow and ultimately to reddish‐orange by simply adjusting the Mn²⁺ content (y) in Ba₃Gd(PO₄)₃:0.005 Eu²⁺,y Mn²⁺ host. The tunable color emissions origin from the change in intensity between the 4f–5d transitions in the Eu²⁺ ions and the ⁴T₁‐⁶A₁ transitions of the Mn²⁺ ions through the energy transfer from the Eu²⁺ to the Mn²⁺ ions. In addition, the mechanism of the energy transfer between the Eu²⁺ and Mn²⁺ ions are also studied in terms of the Inokuti–Hirayama theoretical model. The present results indicate that this novel orange‐yellow‐emitting phosphor can be used as a potential candidate for the application in white LEDs.     

Thermal expansion and heat capacity measurements on Ba10?xCsx(PO4)6Cl2?δ, (x?=?0, 0.5) chloroapatites synthesized by sonochemical process

Ba_10−x Cs _x (PO₄)₆Cl₂, (x = 0, 0.5) chloroapatite ceramics were prepared by sonochemical method of synthesis. The measured room temperature lattice parameters of Ba₁₀ (PO₄)₆Cl₂ and Ba_9.5Cs_0.5 (PO₄)₆Cl_2−δ are practically the same; that is, a = 10.26 (8), c = 7.65 (7) and a = 10.27 (7), c = 7.65 (5), respectively. Heat capacity measurements were carried out on these materials by differential scanning calorimetry (DSC) in the temperature range 298–800 K. The heat capacity values of Ba_9.5Cs_0.5(PO₄)₆Cl_2−δ are found to be slightly higher at all temperatures than those of Ba₁₀(PO₄)₆Cl₂. From the heat capacity data, other thermodynamic functions such as enthalpy and entropy increments were computed. The heat capacity values of Ba₁₀(PO₄)₆Cl₂ and Ba_9.5Cs_0.5(PO₄)₆Cl_2−δ at 298 K are 0.3912 and 0.4310 J K⁻¹ g⁻¹, respectively. Thermal expansion property of the doped and undoped barium chloroapatites was measured by using a home built dilatometer which uses LVDT as displacement sensor. The bulk thermal expansion of Ba₁₀(PO₄)Cl₂ and Ba_9.5Cs_0.5(PO₄)Cl_2−δ is observed to be about 0.9% in the temperature range of 298–973 K.     

La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)/Tb~(3+)荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La_7O_6(BO_3)(PO_4)_2∶Eu~(3+)材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为5D0→7F2特征能级跃迁,Eu~(3+)的最优掺杂浓度为0.08,对应的CIE坐标为(0.610 2,0.382 3);La_7O_6(BO_3)(PO_4)_2∶Tb~(3+)材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb~(3+)的5D4→7F5能级跃迁,Tb~(3+)离子的最优掺杂浓度为0.15,对应的CIE坐标为(0.317 7,0.535 2)。此外,对2种材料的变温光谱分析发现Eu~(3+)和Tb~(3+)掺杂的La_7O_6(BO_3)(PO_4)_2荧光材料均具有良好的热稳定性。     

M5(PO4)3F (M=Ca, Sr, Ba)中Sm3+的电荷迁移态及Sm3+和Eu3+的电荷迁移能量关系

采用高温固相反应合成了M_5-2xSm_xNa_x(PO₄)₃F(M=Ca,Sr,Ba)荧光体,研究了其在真空紫外-可见光范围的发光特性。发现在Ca₅(PO₄)₃F中Sm³⁺的电荷迁移带约在191 nm,在Sr₅(PO₄)₃F中约在199 nm,而在Ba₅(PO₄)₃F中约在204 nm,随着被取代碱土离子半径的增大电荷迁移能量逐渐减小。比较了M₅(PO₄)₃F (M=Ca,Sr,Ba)中Sm³⁺和Eu³⁺电荷迁移能量的关系。     

Crystal structure,magnetic and mössbauer investigation of a new Nasicon-type phosphate Ba0.5FeNb(PO4)3

The crystal structure of Ba_0.5FeNb(PO₄)₃ has been refined from X-ray powder diffraction data by the Rietveld profilation method. Ba_0.5FeNb(PO₄)₄ belong to the Nasicon - type structure with space group R—c. Ba³⁺ ions occupies statistically a half of the sites M(1) (6b).The Fe³⁺ and Nb⁵⁺ ions are distributed statistically in (A) sites (12c) Magnetic measurements have shown that Ba_0.5FeNb(PO₄)₃ follows the Curie-weiss law and presents weak interactions between ferric ions. Mössbauer resonance confirms the ionic character of the Fe-O bonds.     

A novel stibium phosphate,LiBa(SbO)2(PO4)3: synthesis,crystal structure and RE3+‐activated (RE = Tb3+ and Eu3+) fluorescence performance

A new stibium phosphate, lithium barium bis(antimony oxide) tris(phosphate), LiBa(SbO)₂(PO₄)₃, was prepared by the molten salt method with LiF as the flux. The crystal structure consists of an original three‐dimensional anionic framework of [(SbO)₂(PO₄)₃]_∞ built from PO₄ tetrahedra sharing their corners with SbO₆ octahedra. This framework delimits one‐dimensional tunnels where the lithium(I) and barium(II) ions are located. The UV–Vis spectrum shows that LiBa(SbO)₂(PO₄)₃ was transparent from 350 to 800 nm, and is thus suitable as a luminescent host matrix. We then used Tb³⁺ and Eu³⁺ activators to test its luminous performance and the purities of the prepared phosphors were studied by powder X‐ray diffraction analysis with Rietveld refinements. Photoluminescence (PL) studies reveal that the emission spectra of 1 mol% RE³⁺‐doped (RE = Tb and Eu) samples can be excited by 371 and 394 nm light, emitting green and orange–red light, respectively, for Tb³⁺ and Eu³⁺. The CIE coordinates were measured to be (0.295, 0.571) and (0.6027, 0.3967), and the luminescent lifetimes were calculated as 0.178 and 1.159 ms, respectively.     

The chemistry of the phosphates of barium and tetravalent cations in the 1:1 stoichiometry

The chemistry of phosphates of barium and tetravalent cations [BaM^IV(PO₄)₂] is reviewed. Such phosphates crystallise in the C2/m space group for M^IV=Ti, Zr, Hf, Ge, Sn, and Mo, and in the P2₁/n space group for BaTh(PO₄)₂. The existence of BaM^IV(PO₄)₂ in which M^IV=Pb, Ce, and U is further evaluated. Several aspects, such as phase transitions in the compounds with yavapaiite structure, solid solutions of BaM^IV(PO₄)₂ compounds and practical applications are briefly discussed.     

氟化镁锶中铕和铽的电荷迁移及其平衡解析

在氩气氛中，合成子ＳｒＭｇＦ４：ｘＥｕ，ｙＴｂ复合氟化物磷光体，该体系中Ｅｕ＾３＋和Ｅｕ＾２＋共存，随共掺入Ｔｂ浓度的增加，Ｅｕ＾３＋的荧光发射强度降低，Ｅｕ＾３＋的发光增强，并且Ｅｕ＾２＋的ＥＳＲ信号增强，认为Ｅｕ＾３＋和Ｔｂ３＋之间存在的电荷迁移，即Ｅｕ＾３＋Ｔｂ＾３＋→Ｅｕ＾２＋＋Ｔｂ＾４＋，通过半量手段研究了这一电荷迁移反应的平衡常数。     

Cinnamal Sensing and Luminescence Color Tuning in a Series of Rare-Earth Metal−Organic Frameworks with Trans-1,4-cyclohexanedicarboxylate

Three isostructural metal–organic frameworks ([Ln₂(phen)₂(NO₃)₂(chdc)₂]·2DMF (Ln³⁺ = Y³⁺ for 1, Eu³⁺ for 2 or Tb³⁺ for 3; phen = 1,10-phenanthroline; H₂chdc = trans-1,4-cyclohexanedicarboxylic acid) were synthesized and characterized. The compounds are based on a binuclear block {M₂(phen)₂(NO₃)₂(OOCR)₄} assembled into a two-dime nsional square-grid network containing tetragonal channels with 26% total solvent-accessible volume. Yttrium (1)-, europium (2)- and terbium (3)-based structures emit in the blue, red and green regions, respectively, representing the basic colors of the standard RGB matrix. A doping of Eu³⁺ and/or Tb³⁺ centers into the Y³⁺-based phase led to mixed-metal compositions with tunable emission color and high quantum yields (QY) up to 84%. The bright luminescence of a suspension of microcrystalline 3 in DMF (QY = 78%) is effectively quenched by diluted cinnamaldehyde (cinnamal) solutions at millimolar concentrations, suggesting a convenient and analytically viable sensing method for this important chemical.     

Luminescent properties and energy transfer process of Sm3+-Eu3+ co-doped MY2(MoO4)4 (M=Ca,Sr and Ba) red-emitting phosphors

MY₂(MoO₄)₄:Sm³⁺ and MY₂(MoO₄)₄:xSm³⁺,yEu³⁺ (M=Ca, Sr and Ba) phosphors were successfully prepared using solid-state reaction route, and their luminescent properties and energy transfer process from Sm³⁺ to Eu³⁺ were systematically investigated. The results indicate that MY₂(MoO₄)₄:Sm³⁺ phosphors can be effectively excited by 407 nm near UV light originating from the ⁶H_5/2 → ⁴F_7/2 transition of Sm³⁺, and exhibit a satisfactory red emission at 646 nm attributed to the ⁴G_5/2 → ⁶H_9/2 transition of Sm³⁺, in which the emission intensity of SrY₂(MoO₄)₄:Sm³⁺ is the strongest among the MY₂(MoO₄)₄:Sm³⁺ (M=Ca, Sr and Ba) phosphors. For Eu³⁺ co-doped MY₂(MoO₄)₄:Sm³⁺ samples, with increasing Eu³⁺ doping content, the main emission peaks of Sm³⁺ (approximately 646 nm) are decreased, but the emission peaks and intensity of Eu³⁺ are increased while the maximum intensity of luminescence at the Eu³⁺ concentration 0.9. The introduction of Eu³⁺ in the MY₂(MoO₄)₄:Sm³⁺ phosphors can remarkably generate a strong emission line at 616 nm, originating from the ⁵D₀→⁷F₂ transition of Eu³⁺ and Sm³⁺ (⁴G_5/2) → Eu³⁺ (⁵D₀) effective energy transfer process. The energy transfer mechanism from Sm³⁺ to Eu³⁺ was discussed in detail.     

Sr,Ba and Cd arsenates with the apatite‐type structure

X‐ray diffraction analysis of single crystals of three new arsenates adopting apatite‐type structures yielded formula Sr₅(AsO₄)₃F for strontium arsenate fluoride, (I), (Sr_1.66Ba_0.34)(Ba_2.61Sr_0.39)(AsO₄)₃Cl for strontium barium arsenate chloride, (II), and Cd₅(AsO₄)₃Cl_0.58(OH)_0.42 for cadmium arsenate hydroxide chloride, (III). All three structures are built up of isolated slightly distorted AsO₄ tetrahedra that are bridged by Sr²⁺ in (I), by Sr²⁺/Ba²⁺ in (II) and by Cd²⁺ in (III). Compounds (I) and (II) represent typical fluorapatites and chlorapatites, respectively, with F⁻ at the 2a (0, 0, ) site and Cl⁻ at the 2b (0, 0, 0) site of P6₃/m. In contrast, in (III), due to the requirement that the smaller Cd²⁺ cation is positioned closer to the channel Cl⁻ anion (partially substituted by OH⁻), the anion occupies the unusual 2a (0, 0, ) site. Therefore, Cl⁻ is similar to F⁻ in (I), coordinated by three A2 cations, unlike the octahedrally coordinated Cl⁻ in (II) and other ordinary chlorapatites. Furthermore, in (III), using FT–IR studies, we have inferred the existence of H⁺ outside the channel in oxyhydroxyapatites and provided possible atomic coordinates for a H atom in HAsO₄²⁻, leading to a proposed formulation of the compound as Cd₅(AsO₄)_3−x(HAsO₄)_xCl_0.58(OH)_{0.42−x−(y/2)}O_x+(y/2)□_y/2.     

Beiträge zum thermischen Verhalten und zur Kristallchemie von wasserfreien Phosphaten XXXII [1] Neue Orthophosphate des zweiwertigen Chroms — Mg3Cr3(PO4)4, Mg3, 75Cr2, 25(PO4)4, Ca3Cr3(PO4)4 und Ca2, 00Cr4, 00(PO4)4

Contributions on Crystal Chemistry and Thermal Behaviour of Anhydrous Phosphates. XXXII. New Orthophosphates of Divalent Chromium — Mg₃Cr₃(PO₄)₄, Mg_{3, 75}Cr_{2, 25}(PO₄)₄, Ca₃Cr₃(PO₄)₄ and Ca_{2, 00}Cr_{4, 00}(PO₄)₄ Solid state reactions via the gas phase led in the systems A₃(PO₄)₂ / Cr₃(PO₄)₂ (A = Mg, Ca) to the four new compounds Mg₃Cr₃(PO₄)₄ ( A ), Mg_3.75Cr_2.25(PO₄)₄ ( B ), Ca₃Cr₃(PO₄)₄ ( C ), and Ca_2.00Cr_4.00(PO₄)₄ ( D ). These were characterized by single crystal structure investigations [( A ): P2₁/n, Z = 1, a = 4.863(2) Å, b = 9.507(4) Å, c = 6.439(2) Å, β = 91.13(6)°, 1855 independend reflections, 63 parameters, R1 = 0.035, wR2 = 0.083; ( B ): P2₁/a, Z = 2, a = 6.427(2) Å, b = 9.363(2) Å, c = 10.051(3) Å, β = 106.16(3)°, 1687 indep. refl., 121 param., R1 = 0.032, wR2 = 0.085; ( C ): P‐1, Z = 2, a = 8.961(1) Å, b = 8.994(1) Å, c = 9.881(1) Å, α = 104.96(2)°, β = 106.03(2)°, γ = 110.19(2)°, 2908 indep. refl., 235 param., R1 = 0.036, wR2 = 0.111; ( D ): C2/c, Z = 4, a = 17.511(2) Å, b = 4.9933(6) Å, c = 16.825(2) Å, β = 117.95(1)°, 1506 indep. refl., 121 param., R1 = 0.034, wR2 = 0.098]. The crystal structures contain divalent chromium on various crystallographic sites, each showing a (4+n)‐coordination (n = 1, 2, 3). For the magnesium compounds and Ca_2.00Cr_4.00(PO₄)₄ a disorder of the divalent cations Mg²⁺/Cr²⁺ or Ca²⁺/Cr²⁺ is observed. Mg_3.75Cr_2.25(PO₄)₄ adopts a new structure type, while Mg₃Cr₃(PO₄)₄ is isotypic to Mg₃(PO₄)₂. Ca₃Cr₃(PO₄)₄ and Ca_2.00Cr_4.00(PO₄) ₄ are structurally very closely related and belong to the Ca₃Cu₃(PO₄)₄‐structure family. The orthophosphate Ca₉Cr(PO₄)₇, containing trivalent chromium, has been obtained besides C and D .     

VUV-UV Photoluminescence Spectra of Strontium Orthophosphate Doped with Rare Earth Ions

The measurements of VUV-UV photoluminescence emission (PL) and photoluminescence excitation (PLE) spectra of rare earth ions activated strontium orthophosphate [Sr₃(PO₄)₂:RE, RE = Ce, Sm, Eu, Tb] are performed. Whenever the samples are excited by VUV or UV light, the typical emission of Ce³⁺, Sm³⁺, Eu³⁺, Eu²⁺ and Tb³⁺ ions can be observed in PL spectra, respectively. The charge transfer bands (CTBs) of Sm³⁺ and Eu³⁺ are found, respectively, peaking at 206 and 230 nm. The absorption bands peaking in the region of 150-160 nm are assigned to the host lattice sensitization bands, i.e., the band-to-band transitions of PO₄³⁻ grouping in Sr₃(PO₄)₂. It is speculated that the first f-d transitions of Sm³⁺ (Eu³⁺), and the CTB of Tb³⁺are, respectively, located around 165 (1 4 3) and 167 nm by means of VUV-UV PLE spectra and relational empirical formula, these f-d transitions or CT bands are included in the bands with the maxima at 150-160 nm, respectively. The valence change of europium from trivalent to divalent in strontium orthophosphate prepared in air is observed by VUV-UV PL and PLE spectra.     

A novel Sr3Y(PO4)3-based white light-emitting phosphor

The Sr₃Y(PO₄)₃:0.05Sm³⁺, Sr₃Y(PO₄)₃:0.005Tb³⁺, and Sr₃Y(PO₄)₃:0.005Tb³⁺, 0.05Sm³⁺ phosphors were synthesized using a conventional solid-state reaction technique at high temperature and their photoluminescence properties under ultraviolet (UV) excitation were studied. We observed the UV sensitization of Sm³⁺ emission (565, 600, and 648 nm) by Tb³⁺ in Sr₃Y(PO₄)₃:0.005Tb³⁺, 0.05Sm³⁺, that leads to a white light emission with the CIE coordinate (0.367, 0.312) of Sr₃Y(PO₄)₃:0.005Tb³⁺, 0.05Sm³⁺ phosphor under UV excitation. The emission is a result of partial energy transfer from Tb³⁺ to Sm³⁺, which is discussed in detail in terms of the corresponding excitation and emission spectra.