Fast and highly selective determination of cyanide with 2,2-dihydroxy-1,3-indanedione

A very simple, accurate, fast, selective and sensitive assay of cyanide based on its reaction with 2,2-dihydroxy-l,3-indanedione at basic pH is proposed. As little as 0.01 μg ml⁻¹ of cyanide can be determined. The molar absorptivity may reach 5.1–8.0×10⁴ l mol⁻¹ cm⁻¹ depending on the reaction conditions. Thus, 1 ml of sample solution is mixed with 500 μl of 5 mg ml⁻¹ solution of 2,2-dihydroxy-1,3-indanedione monohydrate in 2% sodium carbonate. The absorbance of the purple color is measured at 510 nm in 1-cm glass cuvettes, 10–15 min after mixing the reagents. The procedure could also be used to identify free CN⁻ in natural waters and hydrocyanic acid in the environment.     

Extraction and spectrophotometric determination of cobalt(II) with isonitroso-5-methyl-2-hexanone

A simple and selective method is proposed for the extraction of cobalt(II) for its spectrophotometric determination using (HIMH) as an extractant. Cobalt(II) forms a yellow coloured complex with HIMH which can be extracted into chloroform. The calibration curve is rectilinear in the concentration range 0.1–5.0 μg ml⁻¹ of cobalt(II). The extracted species shows an absorption maximum at 400 nm with molar absorptivity of 1.135×10⁴ l mol⁻¹ cm⁻¹. The method has been applied for the determination of cobalt in synthetic mixtures, pharmaceutical, biological and high speed steel samples.     

One-electron oxidation of mitomycin C and its corresponding peroxyl radicals. A steady-state and pulse radiolysis study

The one-electron oxidation of Mitomycin C (MMC) as well as the formation of the corresponding peroxyl radicals were investigated by both steady-state and pulse radiolysis. The steady-state MMC-radiolysis by OH-attack followed at both absorption bands showed different yields: at 218 nm G_i (-MMC) = 3.0 and at 364 nm G_i (-MMC) = 3.9, indicating the formation of various not yet identified products, among which ammonia was determined, G(NH₃) = 0.81. By means of pulse radiolysis it was established a total κ (OH + MMC) = (5.8 ± 0.2) × 10⁹ dm³ mol⁻¹ s⁻¹. The transient absorption spectrum from the one-electron oxidized MMC showed absorption maxima at 295 nm (ε = 9950 dm³ mol⁻¹ cm^t-1), 410 nm (ε = 1450 dm³ mol⁻¹ cm⁻¹) and 505 nm ( ε = 5420 dm³ mol⁻¹ cm⁻¹). At 280–320 and 505 nm and above they exhibit in the first 150 μs a first order decay, κ₁ = (0.85 ± 0.1) × 10³ s⁻¹, and followed upto ms time range, by a second order decay, 2κ = (1.3 ± 0.3) × 10⁸ dm³ mol^-1 s⁻¹. Around 410 nm the kinetics are rather mixed and could not be resolved.

The steady-state MMC-radiolysis in the presence of oxygen featured a proportionality towards the absorbed dose for both MMC-absorption bands, resulting in a G_i (-MMC) = 1.5. Among several products ammonia-yield was determined G(NH₃) = 0.52. The formation of MMC-peroxyl radicals was studied by pulse radiolysis, likewise in neutral aqueous solution, but saturated with a gas mixture of 80% N₂O and 20% O₂. The maxima of the observed transient spectrum are slightly shifted compared to that of the one-electron oxidized MMC-species, namely: 290 nm (ε = 10100 dm³ mol⁻¹ cm⁻¹), 410 nm (ε = 2900 dm³ mol⁻¹ cm⁻¹) and 520 nm (ε = 5500 dm³ mol⁻¹ cm⁻¹). The O₂-addition to the MMC-one-electron oxidized transients was found to be at 290 to 410 nm gk(MMC·OH + O₂) = 5 × 10⁷ dm³ mol⁻¹ s⁻¹, around 480 nm κ = 1.6 × 10⁸ dm³ mol⁻¹ s⁻¹ and at 510 nm and above, κ = 3 × 10⁸ dm³ mol⁻¹ s⁻¹. The decay kinetics of the MMC-peroxyl radicals were also found to be different at the various absorption bands, but predominantly of first order; at 290–420 nm κ₁ = 1.5 × 10³ s⁻¹ and at 500 nm and above, κ = 7.0 × 10³ s⁻¹.

The presented results are of interest for the radiation behaviour of MMC as well as for its application as an antitumor drug in the combined radiation-chemotherapy of patients.     

Spectrophotometric determination of scandium based on the cocoloration effect in scandium-cerium-p-acetylchlorophosphonazo (CPApA) system

Scandium in the presence of cerium(III) forms, with p-acetylchlorophosphonazo (CPApA), a heteropolynuclei ternary β-complex of scandium-cerium-CPApA. The complex gives a very sensitive reaction for scandium with a molar absorptivity of _Sc = 2.29 × 10⁵ l mol⁻¹ cm⁻¹ due to the cocoloration effect. Most foreign ions can be tolerated in considerable amounts. The optimum conditions and the mechanism of the complex formation reaction are discussed. A simple method is proposed for the determination of scandium in alloys, with satisfactory results.     

Determination of trace amounts of beryllium using derivative spectrophotometry in non-ionic micellar medium

A rapid and sensitive method for the trace level determination of beryllium based on the formation of a 1:2 complex (λ_max 560 nm) with 1,4-dihydroxy-9,10-anthracenedione in an aqueous medium containing Triton X-100 is reported. Beer’s law is followed in the range 3.60–360 ng ml⁻¹ of Be(II). The molar absorptivity and Sandell’s sensitivity are 1.68×10⁴ l mol⁻¹cm⁻¹ and 0.54 ng cm⁻², respectively; detection limit is 0.23 ng ml⁻¹ of Be(II). Analysis of synthetic mixtures of composition similar to that of alloys and spiked samples of distilled water, gave results that are in agreement with their beryllium content.     

Spectrophotometric determination of maneb by ternary complex formation with PAR and CTAB

A rapid, simple, direct, and sensitive method has been developed for the determination of maneb (manganese ethylenebisdithiocarbamate) based on the formation of manganese-4-(2′-pyridylazo) resorcinol complex by a ligand displacement reaction, which is rendered water soluble by a cationic surfactant cetyltrimethylammonium bromide (CTAB) by the formation of an ion association complex. Beer's law is obeyed over the concentration range 0.08–2.4 μg/ml of the final solution at 500 nm in pH range 8–12. The molar absorptivity and Sandell's sensitivity are calculated to be 8.84 × 10⁴ l.mol⁻¹.cm⁻¹ and 0.003 μg/cm², respectively. The developed method has been applied to the determination of maneb in commercial formulations, synthetic mixture, grain samples and vegetables.     

Equilibrium and structural studies of silicon(IV) and aluminium(III) in aqueous solution—10. A potentiometric study of aluminium(III) pyrocatecholates and aluminium(III) hydroxo pyrocatecholates in 0.6 M Na(Cl)

Equilibria between aluminium(III), pyrocatechol (1,2-dihydroxybenzene, H₂L) and OH⁻ were studied in 0.6 M Na(Cl) medium at 25°C. The measurements were performed as emf titrations (glass electrode) within the limits 1.5 ≤ − log[H⁺] ≤ 9; 0.0005 ≤ B ≤ 0.015 M; 0.006 ≤ C ≤ 0.03 M and 2 ≤ C/B ≤ 30 (B and C stand for the total concentrations of aluminium(III) and pyrocatechol respectively). All data can be explained with a main series of complexes: A1L⁺, log β_−2,1,1 = − 6.337 ± 0.005; A1L₂⁻, log β_−4,1,2 = −15.44 ± 0.017 and A1L₃³⁻, log β_−6,1,3 = − 28.62 ± 0.024 together with two minor species: Al(OH)L₂²⁻, log β_−5,1,2 = − 23.45 ± 0.079 and Al₃(OH)₃L₃, log β_−9,3,3 = − 29.91 ± 0.066. Of the two, the latter probably is a type of average composition complex principally occurring at low C/B quotients. The first acidity constant for pyrocatechol as determined in separate experiments is log β_−1,0,1 = − 9.198 ± 0.001. The standard deviations given are 3σ(log β p,q,r). Data were analyzed with the least squares computer program LETAGROPVRID. In a model calculation using kaolinite as solid phase, we compared the complexation ability of this system with that of the system Al³⁺-OH⁻-salicylic acid, reported earlier in this series.     

Heat capacity and thermodynamic properties of N-(2-cyanoethyl) aniline (C9H10N2)

The low temperature heat capacities of N-(2-cyanoethyl)aniline were measured with an automated adiabatic calorimeter over the temperature range from 83 to 353 K. The temperature corresponding to the maximum value of the apparent heat capacity in the fusion interval, molar enthalpy and entropy of fusion of this compound were determined to be 323.33 ± 0.13 K, 19.4 ± 0.1 kJ mol⁻¹ and 60.1 ± 0.1 J K⁻¹ mol⁻¹, respectively. Using the fractional melting technique, the purity of the sample was determined to be 99.0 mol% and the melting temperature for the tested sample and the absolutely pure compound were determined to be 323.50 and 323.99 K, respectively. A solid-to-solid phase transition occurred at 310.63 ± 0.15 K. The molar enthalpy and molar entropy of the transition were determined to be 980 ± 5 J mol⁻¹ and 3.16 ± 0.02 J K⁻¹ mol⁻¹, respectively. The thermodynamic functions of the compound [H_T − H_298.15] and [S_T − S_298.15] were calculated based on the heat capacity measurements in the temperature range of 83–353 K with an interval of 5 K.     

Spectrophotometric method for determination of vanadium and its application to industrial, environmental, biological and soil samples

The very sensitive, fairly selective direct spectrophotometric method for the determination of trace amount of vanadium (V) with 1,5-diphenylcarbohydrazide (1,5-diphenylcarbazide) has been developed. 1,5-diphenylcarbohydrazide (DPCH) reacts in slightly acidic (0.0001–0.001 M H₂SO₄ or pH 4.0–5.5) 50% acetonic media with vanadium (V) to give a red–violet chelate which has an absorption maximum at 531 nm. The average molar absorption coefficient and Sandell’s sensitivity were found to be 4.23×10⁴ l mol⁻¹ cm⁻¹ and 10 ng cm⁻² of V^v, respectively. Linear calibration graph were obtained for 0.1–30 μg ml⁻¹ of V^v: the stoichiometric composition of the chelate is 1:3 (V: DPCH). The reaction is instantaneous and absorbance remain stable for 48 h. The interference from over 50 cations, anions and complexing agents has been studied at 1 μg ml⁻¹ of V^v. The method was successfully used in the determination of vanadium in several standard reference materials (alloys and steels), environmental waters (potable and polluted), biological samples (human blood and urine), soil samples, solution containing both vanadium (V) and vanadium (IV) and complex synthetic mixtures. The method has high precision and accuracy (s=±0.01 for 0.5 μg ml⁻¹).     

Thermochemistry of Cs(hydrogen phthalate) and Cs2(terephthalate)

New compounds of phthalic acid, Cs(HPHT), and terephthalic acid, Cs₂(TPA), have been synthesized. The enthalpy of solution of Cs(HPHT) in water was determined and combined with the standard molar enthalpies of formation of CsOH(aq), H₂O(l) and phthalic acid(s) to calculate the standard molar enthalpy of formation of Cs(HPHT) of −(1035.6 ± 0.5) kJ mol⁻¹. The enthalpies of solution of Cs₂(TPA) and TPA in approximately 0.11 mol dm⁻³ CsOH were determined and combined with the standard molar enthalpies of formation of TPA(s), H₂O(l) and CsOH(aq, 1:500) to calculate the standard molar enthalpy of formation of Cs₂(TPA) of −(1266.2 ± 0.3) kJ mol⁻¹.     

Extraction and spectrophotometric determination of trace amount of Pd(II) with 2,2'-dithiodianiline

A method for the extraction-spectrophotometric determination of palladium with 2,2′-dithiodianilline (DTDA) is described. DTDA–Pd(II) complex is extracted from an aqueous solution with pH 3 into isobutyl methyl ketone (IBMK) layer. The absorbance is measured at 397 nm and the molar absorptivity found to be 1.47×10⁶ l mol⁻¹ cm⁻¹. The complex system conforms to Beer's law over the range 0.3–220 ng ml⁻¹ palladium (II). The effect of pH (1–6), NaClO₄ concentration, DTDA concentration and shaking time were studied. The ratio of the metal ion to ligand molecules in the complex and its stability constant were found to be 1:1 and 1.45×10⁶, respectively. The tolerance limit for many cations and anions have been determined. Finally the method has been applied successfully to the determination of palladium in synthetic mixtures, alloy and catalyst samples.     

TEMPO-initiated oxidation of 2-aminophenol to 2-aminophenoxazin-3-one

The oxidation reaction of 2-aminophenol (OAP) to 2-aminophenoxazin-3-one (APX) initiated by 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO) has been investigated in methanol at ambient temperature. The oxidation of OAP was followed by electronic spectroscopy and the rate constants were determined according to the rate law −d[OAP]/dt=k_obs[OAP][TEMPO]. The rate constant, activation enthalpy and entropy at 298 K are as follows: k_obs (dm³ mol⁻¹ s⁻¹)=(1.49±0.02)×10⁻⁴, E_a=18±5 kJ mol⁻¹, ΔH^‡=15±4 kJ mol⁻¹, ΔS^‡=−82±17 J mol⁻¹ K⁻¹. The results of oxidation of OAP show that the formation of 2-aminophenoxyl radical is the key step in the activation process of the substrate.     

Determination of absorptivity and formation constant of a chalcone association complex

A UV spectrometric method was developed to determine the molar absorptivity (_C) and formation constant (K_c) of the association complex of unsubstituted chalcone in cyclohexane, in the concentration range from 4.00·10⁻⁴ to 2.00·10⁻² mol dm⁻³. The thermodynamic and spectroscopic magnitudes such as K_c and _C contribute to the understanding of the physicochemical behavior of several ,β-unsaturated carbonylic compounds, of low solubility in water, as it is the case of numerous flavonoids of chemical and biological importance. The studied association complex, formed by two chalcone molecules, is characterized by the constants _C (300.8 nm)=4.98·10⁴ dm³ mol⁻¹ cm⁻¹ and K_c=5.58·10³. The method proposed is convenient for the study of solute–solute molecular associations particularly those due to dipole–dipole interactions.     

Spectrophotometric determination of lead in vegetables with dibromo-p-methyl-carboxysulfonazo

A new highly sensitive and selective chromogenic reagent dibromo-p-methyl-carboxysulfonazo (DBMCSA) was synthesized and studied for the spectrophotometric determination of lead in detail. In 0.25 M phosphoric acid medium, which greatly increases the selectivity, lead reacts with DBMCSA to form a 1:2 blue complex, having a sensitive absorption peak at 648 nm. Under the optimal conditions, Beer's law is obeyed over the range from 0 to 0.8 μg ml⁻¹ Pb(II) and the apparent molar absorptivity is 1.04×10⁵ l mol⁻¹ cm⁻¹. The detection limit and the variation coefficient were found to be 2.14 ng ml⁻¹ and 1.0%, respectively. It is found that, except for Ca(II) and Ba(II), all foreign ions studied do not interfere with determination. The interference caused by Ca(II) and Ba(II) can be easily eliminated by prior extraction with potassium iodide-methylisobutylketone. The method has been applied to the determination of lead in vegetables with satisfactory results.     

Infrared studies of chromones—I Carbonyl and hydroxyl regions

Quantitative IR solution data in carbon tetrachloride and chloroform are recorded for the CO and OH regions of 31 chromones. In the 1580–1700 cm⁻¹ region, 5-hydroxychromones show three main maxima, the two of highest frequency, at 1663 ± 3 cm⁻¹ and 1630 ± 5 cm⁻¹ in CCl₄ (1661 ± 2 cm⁻¹ and 1627 ± 5 cm⁻¹ in CHCl₃), being sufficiently intense as to possess high CO character. Typically, 5-alkoxychromones exhibit two intense maxima in this region, 1663 ± 3 cm⁻¹ and 1613 ± 7 cm⁻¹ in CCl₄ (1657 ± 2 cm⁻¹ and 1608 ± 12 cm⁻¹ in CHCl₃). Diagnostically useful changes in contour and principal peak positions can be seen for substituted and annellated 5-hydroxychromones. In the 2500–3650 cm⁻¹ region, the stretching frequencies of OH groups at the most commonly encountered positions (C-5, C-7, and 2-CH₂OH) in natural chromones, are identified.     

1-(2,3,4-Trihydroxybenzylideneamino)-8-hydroxynaphthalene-3,6-disulfonic acid as reagent for spectrophotometric determination of boron in plants

A highly sensitive and selective method has been developed for spectrophotometric determination of boron in plants, the method based on the color reaction of new reagent 1-(2,3,4-trihydroxybenzylideneamino)-8-hydroxynaphthalene-3,6-disulfonic acid (THBA) with boron (III). In an ammonium acetate solution of pH 8.0, boron(III) reacts with THBA to form a 1:2 yellow complex which has a maximum absorption peak at 430 nm. The reaction can complete within 90 min and the absorbance of the complex remains maximum and almost constant at least for 24 h under a temperature range from 0 to 35 °C. The apparent molar absorptivity and Sandell's sensitivity are 2.95 × 10⁴ l mol⁻¹ cm⁻¹ and 0.00036 ng cm⁻², respectively. The limit of quantification, limit of detection and relative standard deviations were found to be 5.1, 1.5 ng ml⁻¹ and 1.12%, respectively. Under the optimum conditions, the absorbency of the complex (λ_max = 430 nm) increases linearly with concentration up to 0.8 μg ml⁻¹ of boron(III). The influences of foreign ions on the determination of boron were investigated in detail. Most of foreign ions can be tolerated in considerable amounts. Experiments have indicated that THBA as chromogenic reagent for spectrophotometric determination of boron has excellent analytical characteristics. Its sensitivity is more than 4.2-fold that of azomethine-H, and stability is advantage over other derivatives of azomehine-H remarkably. Moreover, the synthesis of THBA and its physicochemical properties of THBA were also investigated in detail. Proposed method has been applied to the determination of boron in plants with satisfactory results.     

Interference from arsenate when determining phosphate by the malachite green spectrophotometric method

The effect of arsenate on phosphate determination by the malachite green spectrophotometric method was investigated. The molar absorptivities of the molybdophosphate and malachite green–molybdoarsenate species at 625 nm and a final acidity of 0.38 M were calculated as 10.4±0.13×10⁴ and 7.2±0.17×10⁴ l mol⁻¹ cm⁻¹ respectively, indicating that arsenate could interfere in phosphate measurement. Arsenate concentrations as low as 23 μg l⁻¹ caused increase in colour development in phosphate solutions. However, the extent of colour development for both anions depended on the final acid concentration of the solution. An acidified sodium sulphite solution (0.83 M NaSO₃, 0.83 M H₂SO₄) quantitatively prevented arsenate colour development up to 300 μg l⁻¹ As(V). It was also demonstrated that the method removed As(V) interferences in mixed As/P solutions and therefore can be used to treat natural water samples with elevated arsenate concentrations before phosphate measurement.     

Specific determination of ferbam residues in fog-water

A specific method for the determination of a fungicide, i.e. iron(III) dimethyldithiocarbamate (ferbam) in fog-water samples is described. The method is based on the releasing of equivalent amount of iron from the fungicide and subsequently determination by spectrophotometrically or by flame-atomic absorption spectrometrically (flame-AAS). The fungicide was extracted with chloroform/toluene from the samples and digested with nitric acid. For spectrophotometric determination, the solution was then treated with ammonium thiocyanate solution in presence of the surfactants and absorbance was measured at 475 nm. Whereas, the digested solution was directly applied for flame-AAS determination of ferbam. The molar absorptivity in terms of ferbam was determined to be (3.49)×10⁴ l mol⁻¹ cm⁻¹. The detection limits for spectrophotometric and flame-AAS methods were calculated to be 62 and 111 ppb ferbam (R.S.D. <1 and <3%), respectively. Whereas, the optimum concentration ranges for the analysis of ferbam are 4–120 and 1.5–55 μg in final volume, respectively. The methods are freed from interference of almost all ions [including Fe(II) and Fe(III)], which can commonly associate with ferbam in fog-water. The methods have been successfully applied to fog samples collected from agriculture sites of Raipur (central India).     

Geminale substituenteneffekte : Teil I. Thermochemie von 1-nitro-, 2-nitro-, 2,2-dinitro-und 2-cyano-2-nitroadamantan

The heats of combustion of 1-nitroadamantane (1), 2-nitroadamantane (2), 2,2-di-nitroadamantane (3) and 2-cyano-2-nitroadamantane (4) were measured by combustion calorimetry, and the heats of sublimation were derived from the temperature dependence of the vapour pressure measured in a flow system. The results for ΔH^XXX_c(c) and ΔH_Sub (in kJ mol⁻¹, standard deviation in parentheses) are: 1, −5824.1 (±2.2) and 63.6 (±1.0); 2, −5841.0 (±2.2) and 58.0 (±2.3); 3, −5685.2 (±1.0) and 96.4 (±1.4); 4, −6238.4 (±1.5) and 70.0 (±1.9).

A comparison of the resulting heats of formation ΔH^XXX_f(g) (in kJ mol⁻¹, standard deviation in parentheses) for 1 = −191.1 (± 2.4), 2 = −179.8 (±3.2), 3 = −154.3 (±1.7) and 4 = −21.0 (±2.5) reveals a destabilizing interaction of the geminal substituents in 3 and 4 amounting to 59 kJ mol⁻¹ (nitro/nitro) and 33 kJ mol⁻¹ (nitro/cyano) respectively.     

Fluorescence reaction and complexation equilibria between norfloxacin and aluminium (III) ion in chloride medium

Norfloxacin, 1-ethyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline carboxylic acid (NORH), reacts with aluminium(III) ion forming the strongly fluorescent complex [Al(HNOR)]³⁺, in slightly acidic medium. The complex shows maximum emission at 440 nm with excitation at 320 nm. The fluorescence intensity is enhanced upon addition of 0.5% sodium dodecylsulphate. Fluorescence properties of the Al-NOR complex were used for the direct determination of trace amounts of NOR in serum. The linear dependence of fluorescence intensity on NOR concentration, at a NOR to Al concentration ratio of 1:10, was found in the concentration range 0.001–2 μg/ml NOR with a detection limit of 0.1 ng/ml. The ability of aluminium (III) ion to form complexes with NOR was investigated by titrations in 0.1 M LiCl medium, using a glass electrode, at 298 K, in the concentration range: 2 × 10⁻⁴ ≤ [Al] ≤ 8 × 10⁻⁴; 5 × 10⁻⁴ ≤ [NOR] ≤ 9 × 10⁻⁴ mol/dm³; 2.8 ≤ pH ≤ 8.3. The experimental data were explained by the following complexes and their respective stability constants, log(β ± σ): [Al(HNOR)], (14.60 ± 0.05); [Al(NOR)], (8.83 ± 0.08); [A1(OH)₃(NOR)], (−14.9 ± 0.1), as well as several pure hydrolytic complexes of A1³⁺. The structure of the [Al(HNOR)] complex is discussed, with respect to its fluorescence properties.