Metal chalcogenide complex-mediated fabrication of Cu2S film as counter electrode in quantum dot sensitized solar cells

Cu2S film onto FTO glass substrate was obtained to function as counter electrode for polysulfide redox reactions in CdS/CdSe co-sensitized solar cells by sintering after spraying a metal chalcogenide complex, N4H9Cu7S4 solution. Relative to Pt counter electrode, the Cu2S counter electrode provides greater electrocatalytic activity and lower charge transfer resistance. The prepared Cu2S counter electrode represented nanoflower-like porous film which was composed of Cu2S nanosheets on FTO and had a higher surface area and lower sheet resistance than that of sulfided brass Cu2S counter electrode. An energy conversion efficiency of 3.62% was achieved using the metal chalcogenide complex-mediated fabricated Cu2S counter electrode for CdS/CdSe co-sensitized solar cells under 1 sun, AM 1.5 illumination.     

Easily manufactured TiO2 hollow fibers for quantum dot sensitized solar cells

TiO(2) hollow fibers with high surface area were manufactured by a simple synthesis method, using natural cellulose fibers as template. The effective light scattering properties of the hollow fibers, originating from their micron size, were observed by diffuse reflectance spectroscopy. In spite of the micrometric length of the TiO(2) hollow fibers, the walls were highly porous and high surface area (78.2 m(2) g(-1)) was obtained by the BET method. TiO(2) hollow fibers alone and mixed with other TiO(2) pastes were sensitized with CdSe quantum dots (QDs) by Successive Ionic Layer Adsorption and Reaction (SILAR) and integrated as a photoanode in quantum dot sensitized solar cells (QDSCs). High power conversion efficiency was obtained, 3.24% (V(oc) = 503 mV, J(sc) = 11.92 mA cm(-2), FF = 0.54), and a clear correspondence of the cell performance with the photoanode structure was observed. The unique properties of these fibers: high surface area, effective light scattering, hollow structure to facile electrolyte diffusion and the rather high efficiencies obtained here suggest that hollow fibers can be introduced as promising nanostructures to make highly efficient quantum dot sensitized solar cells.     

Unpredicted electron injection in CdS/CdSe quantum dot sensitized ZrO2 solar cells

A quantum dot sensitized solar cell based on a porous ZrO(2) film, sensitized with CdSe quantum dots using CdS as an intermediate layer is presented. We observe electron injection from photo-excited quantum dots into the ZrO(2), which is unexpected due to the much higher conduction band edge (closer to the vacuum level) of bulk ZrO(2) compared to TiO(2).     

PbS quantum dot sensitized anatase TiO2 nanocorals for quantum dot-sensitized solar cell applications

Lead sulphide (PbS) quantum dot (QD) sensitized anatase TiO(2) nanocorals (TNC) were synthesized by SILAR and hydrothermal techniques. The TNC, PbS and PbS-TNC samples were characterized by optical absorption, XRD, FT-IR, FESEM and XPS. The results show that PbS QDs are coated on the TNCs, the optical absorption is found to be enhanced and the band edge is shifted to ~693 nm as compared with plain TNCs at 340 nm. The PbS-TNC sample exhibits an improved photoelectrochemical performance with a maximum short circuit current (J(sc)) of 3.84 mA cm(-2). The photocurrent density was found to be enhanced 2 fold, as compared with those of the bare PbS photoelectrode. The total power conversion efficiency of the PbS-TNC electrodes is 1.23%.     

Graphene quantum dots assisted photovoltage and efficiency enhancement in CdSe quantum dot sensitized solar cells

CdSe quantum dot sensitized solar cells(QDSCs) modified with graphene quantum dots(GQDs) have been successfully achieved in this work for the first time. Satisfactorily, the optimized photovoltage(Voc) of the modified QDSCs was approximately 0.04 V higher than that of plain CdSe QDSCs, consequently improving the photovoltaic performance of the resulting QDSCs. Served as a novel coating on the CdSe QD sensitized photoanode, GQDs played a vital role in improving Vocdue to the suppressed charge recombination which has been confirmed by electron impedance spectroscopy as well as transient photovoltage decay measurements. Moreover, different adsorption sequences, concentration and deposition time of GQDs have also been systematically investigated to boost the power conversion efficiency(PCE) of CdSe QDSCs. After the coating of CdSe with GQDs, the resulting champion CdSe QDSCs exhibited an improved PCE of 6.59% under AM 1.5G full one sun illumination.     

Synthesis of ZnO nanorods and their application in quantum dot sensitized solar cells

ZnO nanorod thin films of different thicknesses and CdS quantum dots have been prepared by chemical method. X-ray diffraction pattern reveals that the CdS quantum dot and ZnO nanorods are of hexagonal structure. Field emission scanning electron microscope images show that the diameter of hexagonal shaped ZnO nanorods ranges from 110 to 200 nm and the length of the nanorod vary from 1.3 to 4.7 μm. CdS quantum dots with average size of 4 nm have been deposited onto ZnO nanorod surface using successive ionic layer adsorption and reaction method and the assembly of CdS quantum dot with ZnO nanorod has been used as photo-electrode in quantum dot sensitized solar cells. The efficiency of the fabricated CdS quantum dot-sensitized ZnO nanorod-based solar cell is 1.10 % and is the best efficiency reported so far for this type of solar cells.     

Incorporation of graphene in quantum dot sensitized solar cells based on ZnO nanorods

We demonstrate a novel architecture of solar cell by incorporating graphene thin film in a quantum dot sensitized solar cell. Quantum dot sensitized nanorods with a graphene layer exhibited a 54.7% improvement comparing a quantum dot sensitized ZnO nanorods without graphene layer. A fill factor as high as ～62% was also obtained.     

Directly assembled CdSe quantum dots on TiO2 in aqueous solution by adjusting pH value for quantum dot sensitized solar cells

We report an improved quantum dot sensitized solar cell (QDSSC) by loading mercaptopropionic acid (MPA)-capped CdSe QDs on TiO₂ film in aqueous solution. Under suitable pH value, a power conversion efficiency of 1.19% and an incident photon to current conversion efficiency of 26% for the QDSSC were obtained at AM1.5G irradiation. The improved performance of QDSSC is attributed to the large loading and good coverage of QDs on TiO₂ film with optimal pH value.     

Mn-doped quantum dot sensitized solar cells: a strategy to boost efficiency over 5%

To make Quantum Dot Sensitized Solar Cells (QDSC) competitive, it is necessary to achieve power conversion efficiencies comparable to other emerging solar cell technologies. By employing Mn(2+) doping of CdS, we have now succeeded in significantly improving QDSC performance. QDSC constructed with Mn-doped-CdS/CdSe deposited on mesoscopic TiO(2) film as photoanode, Cu(2)S/Graphene Oxide composite electrode, and sulfide/polysulfide electrolyte deliver power conversion efficiency of 5.4%.     

Nanocrystalline TiO2 solar cells sensitized with InAs quantum dots

We report nanocrystalline TiO2 solar cells sensitized with InAs quantum dots. InAs quantum dots of different sizes were synthesized and incorporated in solar cell devices. Efficient charge transfer from InAs quantum dots to TiO2 particles was achieved without deliberate modification of the quantum dot capping layer. A power conversion efficiency of about 1.7% under 5 mW/cm2 was achieved; this is relatively high for a nanocrystalline metal oxide solar cell sensitized with presynthesized quantum dots, but this efficiency could only be achieved at low light intensity. At one sun, the efficiency decreased to 0.3%. The devices are stable for at least weeks under room light in air.     

Uncovering the role of the ZnS treatment in the performance of quantum dot sensitized solar cells

Among the third-generation photovoltaic devices, much attention is being paid to the so-called Quantum Dot sensitized Solar Cells (QDSCs). The currently poor performance of QDSCs seems to be efficiently patched by the ZnS treatment, increasing the output parameters of the devices, albeit its function remains rather unclear. Here new insights into the role of the ZnS layer on the QDSC performance are provided, revealing simultaneously the most active recombination pathways. Optical and AFM characterization confirms that the ZnS deposit covers, at least partially, both the TiO(2) nanoparticles and the QDs (CdSe). Photoanodes submitted to the ZnS treatment before and/or after the introduction of colloidal CdSe QDs were studied by electrochemical impedance spectroscopy, cyclic voltammetry and photocurrent experiments. The corresponding results prove that the passivation of the CdSe QDs rather than the blockage of the TiO(2) surface is the main factor leading to the efficiency improvement. In addition, a study of the ultrafast carrier dynamics by means of the Lens-Free Heterodyne Detection Transient Grating technique indicates that the ZnS shell also increases the rate of electron transfer. The dual role of the ZnS layer should be kept in mind in the quest for new modifiers for enhancing the performance of QDSCs.     

A solid-state CdSe quantum dot sensitized solar cell based on a quaterthiophene as a hole transporting material

A hybrid quantum dot sensitized solar cell (QDSC) composed of CdSe quantum dots (QDs) as light harvesters and TiO(2) and 3,3'-didodecyl-quaterthiophene (QT12) as electron and hole conductors, respectively, has been fully processed in air. The sensitizer has been introduced into the TiO(2) nanoporous layer either by the successive ionic layer adsorption and reaction method or by attaching colloidal QDs either directly or through molecular cables (linkers). As previously observed for QDSCs based on liquid electrolytes, the efficiency depends on the way of QD attachment, the direct adsorption of QDs being the procedure yielding the best results. Thermal annealing was applied in order to enhance the device response under illumination. Remarkable open circuit potentials are attained (close to 1 V), leading to an efficiency of 0.34% (AM 1.5G) in initial tests. Although low, it ranks as one of the highest values reported for solid state QDSCs based on titanium dioxide and colloidal quantum dots.     

Flexible quantum dot sensitized solar cell by electrophoretic deposition of CdSe quantum dots on ZnO nanorods

We report on a flexible quantum dot-sensitized solar cell (QDSSC) based on ZnO nanorods with a length of 2 μm. Due to the good coverage of CdSe QDs on ZnO by the electrophoretic deposition method, a maximum power conversion efficiency of ～1% is achieved for the flexible QDSSC.     

Latent gel electrolyte precursors for quasi-solid dye sensitized solar cells

New latent chemically-cross-linked gel electrolyte precursors for quasi-solid dye sensitized solar cells (QDSC) are reported. The gel electrolyte precursors consist of nano-particles and dicarboxylic acids as the latent gelators. The viscosity of the precursor is low at first and does not increase during storage at room temperature. However, when the precursor is baked at 80 degrees C, it solidifies immediately. Photo-voltaic performance is maintained after solidification.     

A quantum dot sensitized solar cell based on vertically aligned carbon nanotube templated ZnO arrays

We report on a quantum dot sensitized solar cell (QDSSC) based on ZnO nanorod coated vertically aligned carbon nanotubes (VACNTs). Electrochemical impedance spectroscopy shows that the electron lifetime for the device based on VACNT/ZnO/CdSe is longer than that for a device based on ZnO/CdSe, indicating that the charge recombination at the interface is reduced by the presence of the VACNTs. Due to the increased surface area and longer electron lifetime, a power conversion efficiency of 1.46% is achieved for the VACNT/ZnO/CdSe devices under an illumination of one Sun (AM 1.5G, 100 mW/cm²).     

Improved performance of dye sensitized ZnO nanorod solar cells prepared using TiO2 seed layer

Zinc oxide (ZnO) nanorods of different structures have been grown on indium-doped tin oxide substrates by using TiO₂ as seed layer. The ZnO nanorods have been prepared using TiO₂ seed layers annealed at different temperatures via a simple sol–gel method. The X-ray diffraction result indicates that the prepared samples are of wurtzite structure. Dye sensitized solar cells have been fabricated using the prepared ZnO nanorods. The open circuit voltage, short circuit current density, fill factor, and power conversion efficiency of the ZnO nanorod based dye sensitized solar cells prepared using TiO₂ seed layers annealed at different temperatures have been determined. The improvement in power conversion efficiency may be due to the flower like structured ZnO nanorods with smaller diameter and large specific surface area which paves way for the efficient electron transfer in hybrid solar cells.     

Improved performance in dye-sensitized solar cells employing TiO2 photoelectrodes coated with metal hydroxides

The performance of dye-sensitized solar cells (DSCs) was compared before and after processing the TiO(2) electrodes by minute-order electrochemical reactions with metal nitrates, where the metals were Mg, Zn, Al, and La, in 2-propanol. An overcoating of metal hydroxide was formed without the need for a sintering process, and magnesium hydroxide was found to give the largest improvement in photovoltage, fill factor, and eventually overall conversion efficiency of the DSCs. To analyze the nature of the improvement, the diffusion coefficient (D) and electron lifetime (tau) were determined. While little influence of overcoating on D was seen, a correlation between the increase in tau and V(oc) was observed for the metals examined here. The remarkable improvement in the electron lifetime of the DSCs suggests that an overcoating with magnesium hydroxide species function as the blocking layers at the fluorine-doped tin oxide and TiO(2) interfaces, thus contributing to the suppression of electron leakage, i.e., recombination processes between unidirectional transporting electrons and poly-iodides such as tri-iodide in the processed TiO(2) photoelectrode systems. The increase in V(oc) can be explained by the increased electron density caused by the increase in electron lifetime.     

Sensitizer molecular structure-device efficiency relationship in dye sensitized solar cells

In the Dye Sensitized Solar Cell (DSSC) the dye sensitizer carries out the light harvesting function and is therefore crucial in determining overall cell efficiency. In addition, the dye sensitizer can influence many of the key electron transfer processes occurring at the TiO(2)/dye/electrolyte interface which also determine efficiency. Dye structure can influence and drive forward electron injection into the conduction band of the TiO(2). Conversely, dye structure can help retard loss electron transfer processes such as charge recombination of injected electrons in the TiO(2) with dye cations and also recombination of these electrons with the electrolyte. Therefore tuning dye sensitizer light absorbing properties and control of the aforementioned electron transfer processes through structural design of the dye sensitizer is an important avenue through which optimization of DSSC efficiency should be pursued. In this critical review the latest work focusing on the design of dyes for efficient DSSCs is revised (111 references).     

Towards flexibility: metal free plastic cathodes for dye sensitized solar cells

We report herein lightweight, and economical dye-sensitized solar cells fabrication facilitated by an all plastic, metal free cathode consisting of poly(3,4-ethylenedioxythiophene).     

Higher open-circuit voltage set by cobalt redox shuttle in SnO_2 nanofibers-sensitized CdTe quantum dot solar cells

In this study, we report an efficient CdTe-SnO_2 quantum dot(QD) solar cell fabricated by heat-assisted drop-casting of hydrothermally synthesized CdTe QDs on electrospun SnO_2 nanofibers. The as-prepared QDs and SnO_2 nanofibers were characterized by dynamic light scattering(DLS), UV–Vis spectroscopy,photoluminescence(PL) spectra, X-ray diffraction(XRD) and transmission electron microscopy(TEM). The SnO_2 nanofibers deposited on fluorine-doped tin oxide(SnO_2) and sensitized with the CdTe QDs were assembled into a solar cell by sandwiching against a platinum(Pt) counter electrode in presence of cobalt electrolyte. The efficiency of cells was investigated by anchoring QDs of varying sizes on SnO_2. The best photovoltaic performance of an overall power conversion efficiency of 1.10%, an open-circuit voltage(Voc)of 0.80 V, and a photocurrent density(JSC) of 3.70 m A/cm~2 were obtained for cells with SnO_2 thickness of5–6 μm and cell area of 0.25 cm~2 under standard 1 Sun illumination(100 m W/cm~2). The efficiency was investigated for the same systems under polysulfide electrolyte as well for a comparison.