The enthalpies of vaporisation of ionic liquids: new measurements and predictions

The enthalpies of vaporisation, Δ(vap)H(298), of seven ionic liquids (ILs) (four imidazoliums, a pyridinium, a phosphonium and an isouronium) have been determined by temperature programmed desorption using line of sight mass spectrometry. They were: 1-ethyl-3-methylimidazolium bis(pentafluoroethyl)phosphinate, [C(2)C(1)Im][PO(2)(C(2)F(5))(2)]; 1-butyl-3-methylimidazolium octylsulfate, [C(4)C(1)Im][C(8)OSO(3)]; 1-butyl-3-methylimidazolium tetrafluoroborate, [C(4)C(1)Im][BF(4)]; 1-hexyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate, [C(6)C(1)Im][FAP]; 1-butylpyridinium methylsulfate, [C(4)Py][C(1)OSO(3)]; trihexyl(tetradecyl)phosphonium tetrafluoroborate, [P(6,6,6,14)][BF(4)] and O-ethyl-N,N,N',N'-tetramethylisouronium trifluoromethanesulfonate, [C(2)(C(1))(4)iU][TfO]. The values were found to be consistent with a previously proposed, predictive, model in which Δ(vap)H(298) is decomposed into a Coulombic component (computable from the IL density) and van der Waals components from the anion and cation. Two previously predicted values of Δ(vap)H(298) were found to be within 6 kJ mol(-1) of the measured experimental values. Values for the van der Waals components are tabulated for eleven cations and twelve anions. Predictions are made for Δ(vap)H(298) for 13 ILs with as yet unmeasured Δ(vap)H(298) values (using experimental molar volumes), and for a further 44 ILs using estimated molar volumes.     

Energetics of C-Cl, C-Br, and C-I bonds in haloacetic acids: enthalpies of formation of XCH2COOH (X=CI, Br, I) compounds and the carboxymethyl radical

The standard molar enthalpies of formation of chloro-, bromo-, and iodoacetic acids in the crystalline state, at 298.15 K, were determined as deltafH(o)m(C2H3O2Cl, cr alpha)=-(509.74+/- 0.49) kJ x mol(-1), deltafH(o)m(C2H3O2Br, cr I)-(466.98 +/- 1.08) kJ x mol(-1), and deltafH(o)m (C2H3O2I, cr)=-(415.44 +/- 1.53) kJ x mol(-1), respectively, by rotating-bomb combustion calorimetry. Vapor pressure versus temperature measurements by the Knudsen effusion method led to deltasubH(o)m(C2H3O2Cl)=(82.19 +/- 0.92) kJ x mol(-1), deltasubH(o)m(C2H3O2Br)=(83.50 +/- 2.95) kJ x mol(-1), and deltasubH(o)m-(C2H3O2I) = (86.47 +/- 1.02) kJ x mol(-1), at 298.15 K. From the obtained deltafH(o)m(cr) and deltasubH(o)m values it was possible to derive deltafH(o)m(C2H3O2Cl, g)=-(427.55 +/- 1.04) kJ x mol(-1), deltafH(o)m (C2H3O2Br, g)=-(383.48 +/- 3.14) kJ x mol(-1), and deltafH(o)m(C2H3O2I, g)=-(328.97 +/- 1.84) kJ x mol(-1). These data, taken with a published value of the enthalpy of formation of acetic acid, and the enthalpy of formation of the carboxymethyl radical, deltafH(o)m(CH2COOH, g)=-(238 +/- 2) kJ x mol(-1), obtained from density functional theory calculations, led to DHo(H-CH2COOH)=(412.8 +/- 3.2) kJ x mol(-1), DHo(Cl-CH2COOH)=(310.9 +/- 2.2) kJ x mol(-1), DHo(Br-CH2COOH)=(257.4 +/- 3.7) kJ x mol(-1), and DHo(I-CH2COOH)=(197.8 +/- 2.7) kJ x mol(-1). A discussion of the C-X bonding energetics in XCH2COOH, CH3X, C2H5X, C2H3X, and C6H5X (X=H, Cl, Br, I) compounds is presented.     

Thermal decomposition mechanism of 1-ethyl-3-methylimidazolium bromide ionic liquid

In order to better understand the volatilization process for ionic liquids, the vapor evolved from heating the ionic liquid 1-ethyl-3-methylimidazolium bromide (EMIM(+)Br(-)) was analyzed via tunable vacuum ultraviolet photoionization time-of-flight mass spectrometry (VUV-PI-TOFMS) and thermogravimetric analysis mass spectrometry (TGA-MS). For this ionic liquid, the experimental results indicate that vaporization takes place via the evolution of alkyl bromides and alkylimidazoles, presumably through alkyl abstraction via an S(N)2 type mechanism, and that vaporization of intact ion pairs or the formation of carbenes is negligible. Activation enthalpies for the formation of the methyl and ethyl bromides were evaluated experimentally, ΔH(?)(CH(3)Br) = 116.1 ± 6.6 kJ/mol and ΔH(?)(CH(3)CH(2)Br) = 122.9 ± 7.2 kJ/mol, and the results are found to be in agreement with calculated values for the S(N)2 reactions. Comparisons of product photoionization efficiency (PIE) curves with literature data are in good agreement, and ab initio thermodynamics calculations are presented as further evidence for the proposed thermal decomposition mechanism. Estimates for the enthalpy of vaporization of EMIM(+)Br(-) and, by comparison, 1-butyl-3-methylimidazolium bromide (BMIM(+)Br(-)) from molecular dynamics calculations and their gas phase enthalpies of formation obtained by G4 calculations yield estimates for the ionic liquids' enthalpies of formation in the liquid phase: ΔH(vap)(298 K) (EMIM(+)Br(-)) = 168 ± 20 kJ/mol, ΔH(f,?gas)(298 K) (EMIM(+)Br(-)) = 38.4 ± 10 kJ/mol, ΔH(f,?liq)(298 K) (EMIM(+)Br(-)) = -130 ± 22 kJ/mol, ΔH(f,?gas)(298 K) (BMIM(+)Br(-)) = -5.6 ± 10 kJ/mol, and ΔH(f,?liq)(298 K) (BMIM(+)Br(-)) = -180 ± 20 kJ/mol.     

Amorphous/crystalline (A/C) thermodynamic "rules of thumb": estimating standard thermodynamic data for amorphous materials using standard data for their crystalline counterparts

Standard thermochemical data (in the form of Δ(f)H° and Δ(f)G°) are available for crystalline (c) materials but rarely for their corresponding amorphous (a) counterparts. This paper establishes correlations between the sets of data for the two material forms (where known), which can then be used as a guideline for estimation of missing data. Accordingly, Δ(f)H°(a)/kJ mol(-1) ≈ 0.993Δ(f)H°(c)/kJ mol(-1) + 12.52 (R(2) = 0.9999; n = 50) and Δ(f)G°/kJ mol(-1) ≈ 0.988Δ(f)H°(c)/kJ mol(-1) + 0.70 (R(2) = 0.9999; n = 10). Much more tentatively, we propose that S°(298)(c)/J K(-1) mol(-1) ≈ 1.084S°(298)(c)/J K(-1) mol(-1) + 6.54 (R(2) = 0.9873; n = 11). An amorphous hydrate enthalpic version of the Difference Rule is also proposed (and tested) in the form [Δ(f)H°(M(p)X(q)·nH(2)O,a) - Δ(f)H°(M(p)X(q),a)]/kJ mol(-1) ≈ Θ(Hf)n ≈ -302.0n, where M(p)X(q)·nH(2)O represents an amorphous hydrate and M(p)X(q) the corresponding amorphous anhydrous parent salt.     

Energetics of C-F, C-Cl, C-Br, and C-I bonds in 2-haloethanols. enthalpies of formation of XCH(2)CH(2)OH (X = F, Cl, Br, I) compounds and of the 2-hydroxyethyl radical

The energetics of the C-F, C-Cl, C-Br, and C-I bonds in 2-haloethanols was investigated by using a combination of experimental and theoretical methods. The standard molar enthalpies of formation of 2-chloro-, 2-bromo-, and 2-iodoethanol, at 298.15 K, were determined as Delta(f)H(degree)m(CH2CH2OH, l) = -315.5 +/- 0.7 kJ.mol-1, Delta(f)H(degree)mBrCH2CH2OH, l) = -275.8 +/- 0.6 kJ.mol-1, Delta(f)H(degree)m(ICH2CH2OH, l) = -207.3 +/- 0.7 kJ.mol-1, by rotating-bomb combustion calorimetry. The corresponding standard molar enthalpies of vaporization, Delta(vap)H(degree)m(ClCH2CH2OH) = 48.32 +/- 0.37 kJ.mol-1, Delta(vap)H(degree)m(BrCH2CH2OH) = 54.08 +/- 0.40 kJ.mol-1, and Delta(vap)H(degree)m(ICH2CH2OH) = 57.03 +/- 0.20 kJ.mol-1 were also obtained by Calvet-drop microcalorimetry. The condensed phase and vaporization enthalpy data lead to Delta(f)H(degree)m(ClCH2CH2OH, g) = -267.2 +/- 0.8 kJ.mol-1, Delta(f)H(degree)m(BrCH2CH2OH, g) = -221.7 +/- 0.7 kJ.mol-1, and Delta(f)H(degree)m(ICH2CH2OH, g) = -150.3 +/- 0.7 kJ.mol-1. These values, together with the enthalpy of selected isodesmic and isogyric gas-phase reactions predicted by density functional theory (B3LYP/cc-pVTZ) and CBS-QB3 calculations were used to derive the enthalpies of formation of gaseous 2-fluoroethanol, Delta(f)H(degree)m(FCH2CH2OH, g) = -423.6 +/- 5.0 kJ.mol-1, and of the 2-hydroxyethyl radical, Delta(f)H(degree)m(CH2CH2OH, g) = -28.7 +/- 8.0 kJ.mol-1. The obtained thermochemical data led to the following carbon-halogen bond dissociation enthalpies: DHo(X-CH2CH2OH) = 474.4 +/- 9.4 kJ.mol-1 (X = F), 359.9 +/- 8.0 kJ.mol-1 (X = Cl), 305.0 +/- 8.0 kJ.mol-1 (X = Br), 228.7 +/- 8.1 kJ.mol-1 (X = I). These values were compared with the corresponding C-X bond dissociation enthalpies in XCH2COOH, XCH3, XC2H5, XCH=CH2, and XC6H5. In view of this comparison the computational methods mentioned above were also used to obtain Delta(f)H(degree)m-594.0 +/- 5.0 kJ.mol-1 from which DHo(F-CH2COOH) = 435.4 +/- 5.4 kJ.mol-1. The order DHo(C-F) > DHo(C-Cl) > DHo(C-Br) > DHo(C-I) is observed for the haloalcohols and all other RX compounds. It is finally concluded that the major qualitative trends exhibited by the C-X bond dissociation enthalpies for the series of compounds studied in this work can be predicted by Pauling's electrostatic-covalent model.     

过渡金属离子液体[C2mim][FeCl4]的溶解热

在干燥氩气氛下, 用等摩尔的高纯无水FeCl3和氯化1-甲基-3-乙基咪唑([C2mim][Cl])直接搅拌混合, 制备棕色透明的含过渡金属铁的离子液体[C2mim][FeCl4]. 在298.15 K下, 利用具有恒温环境的溶解反应热量计测定了这种离子液体的摩尔溶解焓(ΔsHm). 针对[C2mim][FeCl4]溶解于水后即分解的特点, 在Pitzer电解质溶液理论基础上, 提出了确定这种离子液体标准摩尔溶解焓的新方法, 得到了[C2mim][FeCl4]的标准摩尔溶解焓(ΔsH 0—m=-76.6 kJ/mol), 以及Pitzer焓参数组合: β(0)LFe,Cl+β(0)L[C2mim], Cl+ΦLFe,[C2mim]=0.072209和β(1)LFe,Cl+β(1)L[C2mim], Cl=0.15527. 借助热力学循环和Glasser离子液体晶格能理论, 用Fe3+, Cl-和[C2mim]+的离子水化焓数据以及[C2mim][FeCl4]标准摩尔溶解焓, 估算得到了配离子[FeCl4]-(g)解离成Fe3+(g)和4Cl-(g)的解离焓为5659 kJ/mol. 这个结果揭示了离子液体[C2mim][FeCl4]的标准摩尔溶解焓绝对值并不很大的原因, 即很大的离子水化焓被很大的[FeCl4]-(g)的解离焓相互抵消.     

NMR study of ligand exchange and electron self-exchange between oxo-centered trinuclear clusters [Fe3(μ3-O)(μ-O2CR)6(4-R'py)3](+/0)

The syntheses, single crystal X-ray structures, and magnetic properties of the homometallic μ?-oxo trinuclear clusters [Fe?(μ?-O)(μ-O?CCH?)?(4-Phpy)?](ClO?) (1) and [Fe?(μ?-O)(μ-O?CAd)?(4-Mepy)?](NO?) (2) are reported (Ad = adamantane). The persistence of the trinuclear structure within 1 and 2 in CD?Cl? and C?D?Cl? solutions in the temperature range 190-390 K is demonstrated by 1H NMR. An equilibrium between the mixed pyridine clusters [Fe?(μ?-O)(μ-O?CAd)?(4-Mepy)(3-x)(4-Phpy)(x)](NO?) (x = 0, 1, 2, 3) with a close to statistical distribution of these species is observed in CD?Cl? solutions. Variable-temperature NMR line-broadening made it possible to quantify the coordinated/free 4-Rpy exchanges at the iron centers of 1 and 2: k(ex)2?? = 6.5 ± 1.3 × 10?1 s?1, ΔH(?) = 89.47 ± 2 kJ mol?1, and ΔS(?) = +51.8 ± 6 J K?1 mol?1 for 1 and k(ex)2?? = 3.4 ± 0.5 × 10?1 s?1, ΔH(?) = 91.13 ± 2 kJ mol?1, and ΔS(?) = +51.9 ± 5 J K?1 mol?1 for 2. A limiting D mechanism is assigned for these ligand exchange reactions on the basis of first-order rate laws and positive and large entropies of activation. The exchange rates are 4 orders of magnitude slower than those observed for the ligand exchange on the reduced heterovalent cluster [Fe(III)?Fe(II)(μ?-O)(μ-O?CCH?)?(4-Phpy)?] (3). In 3, the intramolecular Fe(III)/Fe(II) electron exchange is too fast to be observed. At low temperatures, the 1/3 intermolecular second-order electron self-exchange reaction is faster than the 4-Phpy ligand exchange reactions on these two clusters, suggesting an outer-sphere mechanism: k?2?? = 72.4 ± 1.0 × 103 M?1 s?1, ΔH(?) = 18.18 ± 0.3 kJ mol?1, and ΔS(?) = -90.88 ± 1.0 J K?1 mol?1. The [Fe?(μ?-O)(μ-O?CCH?)?(4-Phpy)?](+/0) electron self-exchange reaction is compared with the more than 3 orders of magnitude faster [Ru?(μ?-O)(μ-O?CCH?)?(py)?](+/0) self-exchange reaction (ΔΔG(exptl)(?298) = 18.2 kJ mol?1). The theoretical estimated self-exchange rate constants for both processes compare reasonably well with the experimental values. The equilibrium constant for the formation of the precursor to the electron-transfer and the free energy of activation contribution for the solvent reorganization to reach the electron transfer step are taken to be the same for both redox couples. The larger ΔG(exptl)(?298) for the 1/3 iron self-exchange is attributed to the larger (11.1 kJ mol?1) inner-sphere reorganization energy of the 1 and 3 iron clusters in addition to a supplementary energy (6.1 kJ mol?1) which arises as a result of the fact that each encounter is not electron-transfer spin-allowed for the iron redox couple.     

A novel ligand-free palladium catalytic system with SO3H-functional ionic liquids as cocatalyst for amidocarbonylation reaction

Effects of Lewis acid BF3·OEt2, and BrCnsted acids TsOH, CF3COOH, H3PO4, and HCIO4 as cocatalyst respectively on the ligand-free palladium-catalyzed amidocarbonylation were investigated. SO3H-functional ionic liquids 1-methyl-3-（4-sulfonic acid）butylimidazolium hydrosulfate [MIm（CH2）4803H][HSO4] and 1-methyl-3-（4-sulfonic acid）butylimidazolium triflate [MIm（CH2）4SO3H][OTf] were firstly employed as cocatalysts instead of these Lewis acid and Brφnsted acids. By using a ligand-free and weak corrosive catalyst in situ prepared form PdBr2, LiBr.H2O, and [MIm（CH2）4SO3H][OTf], the arnidocarbo- nylation of benzaldehyde, acetamide, and CO could proceed smoothly and afford N-acetyl-α-phenylglycine with yield of 58% in [C6mim]PF6 medium.     

双功能离子液体的合成及二氧化碳捕集性能

采用两步法合成了新型功能化离子液体1-甲氧基乙基-3-甲基咪唑甘氨酸([C_3O_1mim][Gly]),并研究了其对CO_2的吸收性能.利用核磁共振、红外光谱及热重分析等手段进行表征,验证了该离子液体的结构,且发现其具有较高的热稳定性.对比单乙醇胺(MEA),考察了[C_3O_1mim][Gly]在不同温度下对CO_2的捕集能力,结果表明,[C_3O_1mim][Gly]在40℃下的吸收容量可达1.26 mol CO_2/mol IL,远高于MEA,这表明[C_3O_1mim][Gly]对CO_2具有良好的吸收能力,吸收容量随着温度升高而降低.该离子液体同时具有良好的循环稳定性,进行5次吸收解吸操作后仍可保持较高的CO_2吸收量.对该离子液体吸收CO_2进行了动力学研究,结果表明,Pseudo-second-order模型能够较好地描述该吸收过程.     

High-level ab initio predictions for the ionization energies and heats of formation of five-membered-ring molecules: thiophene, furan, pyrrole, 1,3-cyclopentadiene, and borole, C4H4X/C4H4X+ (X = S, O, NH, CH2, and BH)

The ionization energies (IEs) and heats of formation (ΔH°(f0)/ΔH°(f298)) for thiophene (C(4)H(4)S), furan (C(4)H(4)O), pyrrole (C(4)H(4)NH), 1,3-cyclopentadiene (C(4)H(4)CH(2)), and borole (C(4)H(4)BH) have been calculated by the wave function-based ab initio CCSD(T)/CBS approach, which involves the approximation to the complete basis set (CBS) limit at the coupled-cluster level with single and double excitations plus a quasi-perturbative triple excitation [CCSD(T)]. Where appropriate, the zero-point vibrational energy correction (ZPVE), the core-valence electronic correction (CV), and the scalar relativistic effect (SR) are included in these calculations. The respective CCSD(T)/CBS predictions for C(4)H(4)S, C(4)H(4)O, C(4)H(4)NH, and C(4)H(4)CH(2), being 8.888, 8.897, 8.222, and 8.582 eV, are in excellent agreement with the experimental values obtained from previous photoelectron and photoion measurements. The ΔH°(f0)/ΔH°(f298) values for the aforementioned molecules and their corresponding cations have also been predicted by the CCSD(T)/CBS method, and the results are compared with the available experimental data. The comparisons between the CCSD(T)/CBS predictions and the experimental values for C(4)H(4)S, C(4)H(4)O, C(4)H(4)NH, and C(4)H(4)CH(2) suggest that the CCSD(T)/CBS procedure is capable of predicting reliable IE values for five-membered-ring molecules with an uncertainty of ±13 meV. In view of the excellent agreements between the CCSD(T)/CBS predictions and the experimental values for C(4)H(4)S, C(4)H(4)O, C(4)H(4)NH, and C(4)H(4)CH(2), the similar CCSD(T)/CBS IE and ΔH°(f0)/ΔH°(f298) predictions for C(4)H(4)BH, whose thermochemical data are not readily available due to its reactive nature, should constitute a reliable data set. The CCSD(T)/CBS IE(C(4)H(4)BH) value is 8.868 eV, and ΔH°(f0)/ΔH°(f298) values for C(4)H(4)BH and C(4)H(4)BH(+) are 269.5/258.6 and 1125.1/1114.6 kJ/mol, respectively. The highest occupied molecular orbitals (HOMO) of C(4)H(4)S, C(4)H(4)O, C(4)H(4)NH, C(4)H(4)CH(2), and C(4)H(4)BH have also been studied by the natural bond orbital (NBO) method, and the extent of π-electron delocalization in these five-membered rings are discussed in correlation with their molecular structures and orbitals.     

Structural and mechanistic information on the nitrosation of model Fe(II) complexes containing a biomimetic S4N chelate

In order to provide insight into the reaction pathways of nitrogen oxide redox species with [Fe-S] models that may parallel those existing in biology, the reactivity of the iron-sulfur species, {[Fe(II)(S(4)NEt(2)N)]}(2) (1) and [Fe(II)(CH(3)CN)(S(4)NEt(2)N)] (2), where (S(4)NEt(2)N)(2-) = 2,6-bis(2-mercaptophenylthiomethyl)-4-diethylaminopyridine(2-), towards NO(+) (nitrosation) has been studied mechanistically in acetonitrile and compared with the corresponding reactions with NO (nitrosylation). For the nitrosation of 1, the reaction takes place in two steps that correspond to the nitrosation of the mononuclear (2) and dinuclear (1) complexes, respectively. For the corresponding carbonyl complex [Fe(II)(CO)(S(4)NEt(2)N)] (3), the nitrosation reaction occurs in a single step. The relative reactivity of the iron-sulfur species is approximately (1)/(2)/(3) = 1/20/10. Activation parameters for the nitrosation of 1 (ΔH(#) = 27 ± 1 kJ mol(-1), ΔS(#) = -111 ± 2 J K(-1) mol(-1), and ΔV(#) = -19 ± 2 cm(3) mol(-1)), 2 (ΔH(#) = 46 ± 2 kJ mol(-1), ΔS(#) = -22 ± 7 J K(-1) mol(-1), and ΔV(#) = -9.7 ± 0.4 cm(3) mol(-1)) and 3 (ΔH(#) = 38 ± 1 kJ mol(-1), ΔS(#) = -44 ± 4 J K(-1) mol(-1), and ΔV(#) = -7.8 ± 0.3 cm(3) mol(-1)) were determined from variable temperature and pressure studies. The significantly negative ΔS(#) and ΔV(#) values found for the nitrosation reactions are consistent with an associative mechanism. A comparative study of the reactivity of the iron-sulfur species 1 to 3 towards NO(+) and NO is presented.     

Four di-Cu(II)-substituted sandwich-type germanomolybdates obtained under different reaction conditions: from zero-dimensional to two-dimensional structure

Four di-Cu(II)-substituted sandwich-type germanomolybdates, (H(2)en)(2)H(7){[Na(0.5)(H(2)O)(3.5)](2)[Cu(2)(β-Y-GeMo(9)O(33))(2)]}·6H(2)O (1), (H(2)en)(2)H{[Na(2.5)(H(2)O)(12)](2)[Cu(en)(2)][Cu(2)(β-Y-GeMo(9)O(33))(2)]}·8H(2)O (2), [Na(4)(H(2)O)(12)](2)H(4)[Cu(2)(β-Y-GeMo(9)O(33))(2)]}·11H(2)O (3) and [Cu(en)(2)](2)[Cu(en)(2)(H(2)O)](2){[Cu(en)(2)](2)[Cu(2)(β-Y-GeMo(9)O(33))(2)]}·8H(2)O (4) (en = ethylenediamine), have been prepared. It is interesting that 1-3 were obtained in the same aqueous solution reaction system but exhibited different structures: 1 displays a 0D structure, 2 shows an organic-inorganic 1D chain structure, while 3 displays a 2D network. 4 was synthesized under hydrothermal condition by the same reagents, which represents the first transition metal-sandwiched organic-inorganic 2D heteropolymolybdate.     

Ideal gas solubilities and solubility selectivities in a binary mixture of room-temperature ionic liquids

This study focuses on the solubility behaviors of CO2, CH4, and N2 gases in binary mixtures of imidazolium-based room-temperature ionic liquids (RTILs) using 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][Tf2N]) and 1-ethyl-3-methylimidazolium tetrafluoroborate ([C2mim][BF4]) at 40 degrees C and low pressures (approximately 1 atm). The mixtures tested were 0, 25, 50, 75, 90, 95, and 100 mol % [C2mim][BF4] in [C2mim][Tf2N]. Results show that regular solution theory (RST) can be used to describe the gas solubility and selectivity behaviors in RTIL mixtures using an average mixture solubility parameter or an average measured mixture molar volume. Interestingly, the solubility selectivity, defined as the ratio of gas mole fractions in the RTIL mixture, of CO2 with N2 or CH4 in pure [C2mim][BF4] can be enhanced by adding 5 mol % [C2mim][Tf2N].     

N,N-二甲基羟基胺与V(Ⅴ)氧化还原反应动力学及机理研究

二甲基羟胺;反应机理;N;N-二甲基羟基胺与V(Ⅴ)氧化还原反应动力学及机理研究     

Formation and stability of molybdenum-tellurium oxides MoTeO5, Mo2TeO8, Mo3TeO11 and MoTe2O7 in the gas phase. Quantum chemical and mass spectrometry determination of standard enthalpy of formation

The formation of mixed molybdenum-tellurium oxides MoTeO5, Mo2TeO8, Mo3TeO11, MoTe2O7 in the gas phase has been studied by mass spectrometry (MS) experiments at temperatures of about 938 K and studied theoretically by quantum chemical (QC) methods. Structural and thermodynamic data for the molecules was calculated. The mixed oxides MoTeO5, Mo2TeO8, Mo3TeO11 and MoTe2O7 in the gas phase have been reported for the first time. Experimental thermodynamic data have been determined by means of MS and confirmed theoretically by DFT and ab initio (MP2) calculations. Adiabatic ionisation potentials (IPs) were obtained experimentally and compared with theoretical vertical ionisation potentials. The following values are given: Δ(f)H(298)(0) (MoTeO5) = ?730.2 kJ mol(?1) (MS), Δ(f)H(298)(0) (MoTeO5) = ?735.4 kJ mol(?1) (DFT), ?717.3 kJ mol(?1) (MP2), S(298)(0) (MoTeO5) = 389.5 J mol(?1) K(?1) (DFT), c(p)(0)(T)(MoTeO5) = 141.71 + 13.54 × 10(?3)T ? 2.53 × 10(6)T(?2) J mol(?1) K(?1) (298 < T < 940 K) (DFT), Δ(f)H(298)(0) (Mo2TeO8) = ?1436.3 kJ mol(?1) (MS), Δ(f)H(298)(0) (Mo2TeO8) = ?1436.1 kJ mol(?1) (DFT), ?1455.9 kJ mol(?1) (MP2), S(298)(0) (Mo2TeO8) = 517.1 J mol(?1) K(?1) (DFT), c(p)(0)(T)(Mo2TeO8) = 228.64 + 24.15 × 10(?3)T ? 4.09 × 10(6)T(?2) J mol(?1) K(?1) (298 < T < 940 K) (DFT), Δ(f)H(298)(0) (Mo3TeO11) = ?2132.7 kJ mol(?1) (MS), Δ(f)H(298)(0) (Mo3TeO11) = ?2110.7 kJ mol(?1) (DFT), ?2163.2 kJ mol(?1) (MP2), S(298)(0) (Mo3TeO11) = 629.3 J mol(?1) K(?1) (DFT), c(p)(0)(T)(Mo3TeO11) = 316.40 + 34.10 × 10(?3)T ? 5.74 × 10(6)T(?2) J mol(?1) K(?1) (298 < T < 940 K) (DFT), Δ(f)H(298)(0) (MoTe2O7) = ?999.7 kJ mol(?1) (MS), Δ(f)H(298)(0) (MoTe2O7) = ?1002.7 kJ mol(?1) (DFT), ?1000.9 kJ mol(?1) (MP2), S(298)(0) (MoTe2O7) = 504.8 J mol(?1) K(?1) (DFT), c(p)(0)(T)(MoTe2O7) = 211.19 + 18.02 × 10(?3)T ? 3.53 × 10(6)T(?2) J mol(?1) K(?1) (298 < T < 940 K) (DFT), IP(MoTeO5) = 10.68 eV (DFT), IP(Mo2TeO8) = 10.4 ± 0.5 eV (MS), IP(Mo2TeO8) = 10.41 eV (DFT), IP(Mo3TeO11) = 10.7 ± 0.5 eV (MS), IP(Mo3TeO11) = 10.18 eV (DFT), IP(MoTe2O7) = 9.91 eV (DFT).     

水相法合成双(环戊二烯基)钛氨基酸配合物的研究

以N-(取代苯基)氨基乙酸及盐与双(环戊二烯基)二氯化钛在水相及有机相反应,得到了五个双(环戊二烯基)钛氨基酸配合物,对配合物进行了熔点、元素分析、IR及^1HNMR的表征,确定了它们的结构。这些配合物在空气中稳定。经比较,水相中的合成反应速度快,操作简便,产物较易分离,产率高。     

The role of tropospheric ice surfaces in the elimination of the CFC substitute, trifluoroethanol

This work provides uptake results of CF(3)CH(2)OH on ice over the temperature range 203-223 K using a coated wall flow tube coupled to mass spectrometric detection. For experiments over pure ice, the adsorption was fully reversible and the data could be described in terms of the Langmuir isotherm for the range of concentrations and temperatures studied. For this temperature range, ΔH°(ads) = -46 ± 16 kJ mol(-1) was obtained (error is 2σ + 5%). For experiments on doped ice with nitric acid over the temperature range 203-223 K, the number of adsorbed molecules was slightly lower than over pure ice. At temperatures above 231 K, the extent of the reversible uptake of CF(3)CH(2)OH is enhanced in the presence of nitric acid due to coexistence of a liquid solution phase. Under such conditions the obtained solubility data follow Henry's law. Although pure ice and acid doped water surfaces do not permanently scavenge CF(3)CH(2)OH, the partitioning of CF(3)CH(2)OH between the gas phase and aqueous condensed phases may play a role as reservoirs or as a means of transport in the troposphere.     

Rates of water exchange for two cobalt(II) heteropolyoxotungstate compounds in aqueous solution

Polyoxometalate ions are used as ligands in water-oxidation processes related to solar energy production. An important step in these reactions is the association and dissociation of water from the catalytic sites, the rates of which are unknown. Here we report the exchange rates of water ligated to Co(II) atoms in two polyoxotungstate sandwich molecules using the (17)O-NMR-based Swift-Connick method. The compounds were the [Co(4)(H(2)O)(2)(B-α-PW(9)O(34))(2)](10-) and the larger αββα-[Co(4)(H(2)O)(2)(P(2)W(15)O(56))(2)](16-) ions, each with two water molecules bound trans to one another in a Co(II) sandwich between the tungstate ligands. The clusters, in both solid and solution state, were characterized by a range of methods, including NMR, EPR, FT-IR, UV-Vis, and EXAFS spectroscopy, ESI-MS, single-crystal X-ray crystallography, and potentiometry. For [Co(4)(H(2)O)(2)(B-α-PW(9)O(34))(2)](10-) at pH 5.4, we estimate: k(298)=1.5(5)±0.3×10(6) s(-1), ΔH(≠)=39.8±0.4 kJ mol(-1), ΔS(≠)=+7.1±1.2 J mol(-1) K(-1) and ΔV(≠)=5.6 ±1.6 cm(3) mol(-1). For the Wells-Dawson sandwich cluster (αββα-[Co(4)(H(2)O)(2)(P(2)W(15)O(56))(2)](16-)) at pH 5.54, we find: k(298)=1.6(2)±0.3×10(6) s(-1), ΔH(≠)=27.6±0.4 kJ mol(-1) ΔS(≠)=-33±1.3 J mol(-1) K(-1) and ΔV(≠)=2.2±1.4 cm(3) mol(-1) at pH 5.2. The molecules are clearly stable and monospecific in slightly acidic solutions, but dissociate in strongly acidic solutions. This dissociation is detectable by EPR spectroscopy as S=3/2 Co(II) species (such as the [Co(H(2)O)(6)](2+) monomer ion) and by the significant reduction of the Co-Co vector in the XAS spectra.     

Gaseous vanadium molybdate and tungstates: thermodynamic properties and structures

The stability of gaseous vanadium molybdate and vanadium tungstates was confirmed by high-temperature mass spectrometry. A number of gas-phase reactions involving vanadium-containing salts were studied. On the basis of equilibrium constants, the standard formation enthalpies of gaseous VMoO(4) (-676 ± 27 kJ/mol), VWO(3) (-331 ± 29 kJ/mol), and VWO(4) (-706 ± 23 kJ/mol) at 298 K were determined. A theoretical study of these salts revealed the structure with bidentate binding of the vanadium cation to the anion part to be the lowest-lying isomer, with a quartet spin state for VMoO(4) and VWO(4) molecules as well as a sextet spin state for the VWO(3) molecule. On the basis of critical analysis of the literature data concerning standard formation enthalpies of gaseous VO and VO(2), we adopted new values of Δ(f)H°(298) = 135 ± 10 kJ/mol for VO(g) and -185 ± 15.0 kJ/mol for VO(2)(g). Overall, the results obtained allowed us to estimate the standard formation enthalpy of VMoO(3) to be -318 kJ/mol with an accuracy near 40 kJ/mol.     

Metal versus ligand alkylation in the reactivity of the (bis-iminopyridinato)Fe catalyst

The alkylation of the Brookhart-Gibson {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2(C5H3N)} FeCl2 precatalyst with 2 equiv of LiCH2Si(CH3)3 led to the isolation of several catalytically very active products depending on the reaction conditions. The expected dialkylated species {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2}(C5H3N)Fe(CH2SiMe3)2 (2) was indeed the major component of the reaction mixture. However, other species in which alkylation occurred at the pyridine ring ortho position, {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2-2-CH2SiMe3}(C5H3N)Fe(CH2SiMe3) (1), and at the imine C atom, {2-[2,6-(i-Pr)2PhN=C(CH3)]-6-[2,6-(i-Pr)2PhNC(CH3)(CH2 SiMe3)](C5H3N)}Fe(CH2SiMe3) (3), have also been isolated and fully characterized. In addition, deprotonation of the methyl-imino functions and formation of a new divalent Fe catalyst {[2,6-[2,6-(i-Pr)2PhN-C=(CH2)]2(C5H3N)}Fe(mu-Cl)Li(THF)3 (4) also occurred depending on the reaction conditions. In turn, the formation of 4 might trigger the reductive coupling of two units through the methyl-carbon wings. This process resulted in the one-electron reduction of the metal center, affording a dinuclear Fe(I) alkyl catalyst {[{[2,6-(i-Pr)2C6H5]N=C(CH3)}(C5H3N){[2,6-(i-Pr)26H5]N=CCH2}Fe(CH2SiMe3)]}2 (5). Different from other metal derivatives, complex 5 could not be prepared from the monodeprotonated version of the ligand. Its reaction with a mixture of FeCl2 and RLi afforded instead [{2,6-[2,6-(i-Pr)2PhN-C=(CH2)]2(C5H3N)}FeCH2Si(CH3)3][Li(THF)4] (6) which is also catalytically active. All of these high-spin species have been shown to have high catalytic activity for olefin polymerization, producing polymers of two distinct natures, depending on the formal oxidation state of the metal center.