Improvement of surface plasmon resonance biosensor with magnetic beads via assembled polyelectrolyte layers

The conjugates of magnetic beads coupled with an antibody can be trapped on the Au film firmly due to the magnetic force for the immunoassay of a surface plasmon resonance (SPR) biosensor. However, this approach exhibits significant limitations in robustness and sensitivity due to incomplete dissociation of magnetic beads from the Au film. The incorporation of a polyelectrolyte film on the Au surface can prevent the magnetic beads from the direct contact with the Au film. The layer-by-layer assembly of polyelectrolyte was used as spacer between the gold surface and the magnetic bead. Different layers of polyelectrolyte can be assembled onto the Au film based on an electrostatic force between polycations and polyanions. After the polyelectrolyte film was fabricated on the Au film, the deposition of the magnetic beads was maintained effectively on the film, which favors the sensitivity of the biosensor and the regeneration of the sensing membrane. When the polyelectrolyte layers of (PAH/PSS)₃ were constructed on the Au film, the SPR biosensor with magnetic beads exhibited a satisfactory response to human IgG in the concentration range from 0.25 to 30.00 μg mL⁻¹, and the determination limit obtained is eight times lower than that obtained with (PAH/PSS)₁ layer.     

Layer-by-layer self-assembled conducting polymer films at elevated pressure investigated by surface plasmon spectroscopy with electrochemistry

Polyaniline/sulfonated polyaniline (PANI/SPANI) multilayer films were fabricated using the layer-by-layer (LbL) technique. The electrochemical and optical properties of the film at elevated pressure were investigated by high-pressure surface plasmon spectroscopy combined with electrochemistry. Cyclic voltammograms of the PANI/SPANI films were performed at different hydrostatic pressure. It was found that the charge transfer currents decrease with elevated pressure. This indicates that the film becomes more compact with increasing hydrostatic pressure, which is confirmed by surface plasmon spectra, hinting at a substantial increase in the optical density.     

基于层层组装钴铝水滑石/聚电解质包裹碳纳米管的无酶葡萄糖传感器

采用共沉淀法合成了钴铝水滑石(CoAl-LDH),将CoAl-LDH与PSS包裹的CNTs(CNTs@PSS)通过层层自组装法构筑CNTs@PSS/CoAl-LDH多层膜电极,并将其应用于葡萄糖的分析测定。X射线衍射光谱、红外光谱和SEM表明:共沉淀法合成的CoAl-LDH具有典型的水滑石特征峰及形貌。电化学阻抗谱表明:CoAl-LDH可与CNTs@PSS均匀有效地组装构筑多层膜。电化学研究表明:CNTs的引入很好地提高了CoAl-LDH修饰电极的灵敏度。研究结果表明该传感器对葡萄糖在3.0×10-6～4.98×10-4mol/L范围内呈良好的线性响应,灵敏度为1.03×10-3A.L/mol。     

Intercalation of an oxalatooxoniobate complex into layered double hydroxide and layered zinc hydroxide nitrate

A Zn/Al layered double hydroxide with molar ratio of 3 was prepared by coprecipitation in alkaline pH and used as a matrix to intercalate the ionic complex diaquadioxalatooxoniobate(V) (DDON), derived from NH₄[NbO(C₂O₄)₂(H₂O)₂]2H₂O. In a similar way, the layered zinc hydroxide nitrate, Zn₅(OH)₈(NO₃)₂2H₂O, was synthesized, preexpanded with azelate ions (⁻OOC(CH₂)₇COO⁻), and then intercalated with the niobium complex. For both layered matrices, the results from X-ray powder diffractometry, Fourier transform infrared spectroscopy, and thermal analysis (TG/s-DTA) indicate the presence of the oxalate ion. In addition, results from X-ray photoelectron and Raman spectroscopy indicate the presence of the niobium center bonded to oxygen atoms. Finally, diffuse reflectance UV–vis spectroscopy suggests that the niobium centers are coordinated to oxalate ions. This is the first report of the intercalation of niobium into a layered matrix.     

Biopolymer immobilization during the crystalline growth of layered double hydroxide

Alginic acid, a biopolymer produced by brown seaweed, is incorporated between the sheets of a layered double hydroxide (LDH) via direct coprecipitation. The growth of the inorganic crystalline seeds over the polymer gives rise to a lamellar structure. The obtained nanocomposite presents a basal spacing in agreement with the ideal picture of the polymer lying perpendicularly to the inorganic sheets. A study using FTIR and ¹³C CP-MAS spectroscopies suggests that the interaction between the organic guest and the inorganic framework is weak. However, the polymer has a stabilizing effect in temperature, since ZnO is observed at 350°C, whereas it appears at 200°C for the chloride LDH pristine material.     

From Zn-Al layered double hydroxide to ZnO nanostructure:Gradually etching by sodium hydroxide

Zn-Al layered double hydroxide(LDH) was used as precursor to produce ZnO nanostructures through dissolution of aluminum hydroxide in caustic soda.The Zn-Al LDH could transform into different nanostructures of ZnO on LDH nanosheets and even pure ZnO nanorods under various NaOH concentration.The formed ZnO nanorods vertically aligned on both LDH sides.UV-vis diverse reflectance spectra show that the obtained ZnO nanorods have a band gap of approximately 3.05 eV.Such ZnO/LDH nanostructures might be used as photocatalyst in the organic pollutant decomposition.     

LDPE/Mg-Al layered double hydroxide nanocomposite: Thermal and flammability properties

Layered double hydroxides (LDHs) are new nanofillers which exhibit improved thermal and flammability properties in various kinds of polymer matrices. These materials have certain advantages over conventional metal hydroxides and also layered silicates so far as the flame retardancy is concerned. In this article, flammability and thermal properties of the nanocomposite based on low density polyethylene (LDPE) and Mg-Al based layered double hydroxide (Mg-Al LDH) are reported in detail. The nanocomposites containing different LDH concentrations were prepared by melt-compounding using a tightly intermeshing co-rotating twin-screw extruder. The morphological analysis reveals an exfoliated/intercalated type LDH particle morphology in these nanocomposites. The thermogravimetric analysis (TGA) shows that even a small amount of LDH improves the thermal stability and onset decomposition temperature in comparison with the unfilled LDPE. The heat release rate (HRR) and its maximum (PHRR) during cone-calorimeter investigation are found to be reduced significantly with increasing LDH concentration. The nanocomposites not only exhibit reduced total heat released (measure of propensity to produce long duration fire), but also lower tendency to fast fire growth (measured by the ratio of PHRR and time of ignition). The limited oxygen index (LOI) and the dripping behavior are also improved with increasing LDH concentration.     

Electric and dielectric behavior of copper-chromium layered double hydroxide intercalated with dodecyl sulfate anions using impedance spectroscopy

The Cu₂Cr-DS-LDH hybrid was successfully prepared by the anion exchange method at room temperature. The structure, the chemical composition and the physico-chemical properties of the sample were determined using powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA) and inductively coupled plasma (ICP). In this work, the electrical and dielectric properties investigated are determined using impedance spectroscopy (IS) in a frequency range of 1 Hz to 1 MHz. Indeed, the Nyquist diagram modelized by an electrical equivalent circuit showed three contributions attributed respectively to the polarization of grains, grains boundaries and interface electrode-sample. This modelization allowed us to determine the intrinsic electrical parameters of the hybrid (resistance, pseudo-capacitance and relaxation time). The presence of the non-Debye relaxation phenomena was confirmed by the frequency analysis of impedance. Moreover, the evolution of the alternating current conductivity (σ_ac) studied obeys the double power law of Jonscher. The ionic conduction of this material was generated through a jump movement by translation of the charge carriers. As for the dielectric behavior of the material, the evolution of dielectric constant as a function of frequency shows relatively high values in a frequency range between 10 Hz and 1 KHz. The low values of the loss tangent obtained in this frequency zone can valorize this LDH hybrid.     

Layer-by-layer composite films of polyaniline and vanadium pentoxide sol gels studied by electrochemical surface plasmon spectroscopy

Electroactive multilayer films of polyaniline (PAni) and vanadium pentoxide (V₂O₅) sol-gels were prepared on gold surfaces by means of the layer-by-layer (LBL) method. The stepwise buildup and the optoelectrochemical behaviour of the composite films were investigated in-situ by electrochemical surface plasmon spectroscopy (ESPS). A thickness increment of 2.3 nm per deposited bilayer was obtained by modelling the surface plasmon spectra. The composite multilayer films display charging-discharging characteristics similar to a bare vanadium pentoxide xerogel network along with an optoelectrochemical response which is dominated by the conducting polymer component. Electrochemical impedance spectroscopy (EIS) experiments confirm the findings from ESPS with regard to the presence of different conductive states of the composite.     

Mechano-hydrothermal preparation of Li-Al-OH layered double hydroxides

A mechano-hydrothermal (MHT) method was used to synthesize Li-Al-OH layered double hydroxides (LDHs) from LiOH·H₂O, Al(OH)₃ and H₂O as starting materials. A two-step synthesis was conducted, that is, Al(OH)₃ was milled for 1 h, followed by hydrothermal treatment with LiOH·H₂O solution. Effects of the LiOH/Al(OH)₃ molar ratio (R_Li/Al) and hydrothermal temperature (T_ht) on the crystallinity, morphology, and composition of the product were examined. The resulting LDHs were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared, and elemental analyses. The results showed that pre-milling plays a key role in the LDH formation during subsequent hydrothermal treatment. The Li/Al molar ratio of the obtained LDHs keeps constant at 0.5, independent from theR_Li/Al (0.5–5.0) in the starting materials. An increase in the T_ht (20–80 °C) can enhance the crystallinity and morphology regularity of the products. The so-obtained Li-Al-OH LDHs exhibit high crystallinity and well-dispersity, which may have wider applications than the aggregate ones obtained using conventional mechanochemical and Li⁺-imbibition methods.     

Synergistic effects of layered double hydroxide with hyperfine magnesium hydroxide in halogen-free flame retardant EVA/HFMH/LDH nanocomposites

The synergistic effects of layered double hydroxide (LDH) with hyperfine magnesium hydroxide (HFMH) in halogen-free flame retardant ethylene-vinyl acetate (EVA)/HFMH/LDH nanocomposites have been studied by X-ray diffraction (XRD), transmission electron spectroscopy (TEM), thermogravimetric analysis (TGA), limiting oxygen index (LOI), mechanical properties' tests, and dynamic mechanical thermal analysis (DMTA). The XRD results show that the exfoliated EVA/HFMH/LDH can be obtained by controlling the LDH loading. The TEM images give the evidence that the organic-modified LDH (OM-LDH) can act as a disperser and help HFMH particles to disperse homogeneously in the EVA matrix. The TGA data demonstrate that the addition of LDH can raise 5-18 °C thermal degradation temperatures of EVA/HFMH/LDH nanocomposite samples with 5-15 phr OM-LDH compared with that of the control EVA/HFMH sample when 50% weight loss is selected as a point of comparison. The LOI and mechanical tests show that the LDH can act as flame retardant synergist and compatilizer to apparently increase the LOI and elongation at break values of EVA/HFMH/LDH nanocomposites. The DMTA data verify that the T_g value (−10 °C) of the EVA/HFMH/LDH nanocomposite sample with 15 phr LDH is much lower than that (T_g = −2 °C) of the control EVA/HFMH sample without LDH and approximates to the T_g value (−12 °C) of pure EVA, which indicates that the nanocomposites with LDH have more flexibility than that of the EVA/HFMH composites.     

Surface-charging behavior of Zn-Cr layered double hydroxide

A Zn-Cr layered double hydroxide (LDH) having the formula Zn(2)Cr(OH)(6)Cl(0.7)(CO(3))(0.15)2.1H(2)O was synthesized and characterized by powder X-ray diffraction, infrared spectroscopy, acid-base potentiometric titration, mass titration, electrophoretic mobility, and modeling of the electrical double layer. Adsorption of alizarin was also performed in order to show some particular features of the HDL. Net hydroxyl adsorption, which increases with increasing pH and decreasing supporting electrolyte concentration, takes place above pH 5. The electrophoretic mobility of the particles was always positive and it decreased when the pH was higher than 9. An isoelectric point of 12 could be estimated by extrapolating the data. The modified MUSIC model was used to estimate deprotonation constants of surface groups and different adsorption models were compared. Good fit of hydroxyl adsorption and electrophoresis could be achieved by considering both OH(-)/Cl(-) exchange at structural sites and proton desorption from surface hydroxyl groups. The modeling, in agreement with alizarin adsorption, indicates that most of the structural positive charge of the LDH is screened at the surface by exchanged anions and negatively charged surface groups. It also suggests that only structural charge sites initially neutralized by chloride ions are active for anion exchange. The remaining sites are blocked by carbonate and do not participate in the exchange.     

A novel nanocomposite material prepared by intercalating photoresponsive dendrimers into a layered double hydroxide

A novel combination for an inorganic-organic nanocomposite material was demonstrated. Anthryl dendron, i.e., poly(amidoamine) dendron with an anthracene chromophore group at the focal point, was incorporated in the interlayer space of ZnAl-NO₃ type layered double hydroxide (LDH) through an anion-exchange reaction. The photoabsorption and fluorescence properties of the resulting material were different from those of the bare anthryl dendron molecule. It was suggested that the change in photochemical properties was due to the organization and π-π interaction of anthracene chromophores within the interlayer of the LDH.     

Dispersion control and nematic ordering of Ni/Al layered double hydroxide suspensions

In this paper, we report the preparation of aqueous suspensions of Ni/Al layered double hydroxide (LDH) nanoparticles by a non-steady co-precipitation followed by peptization. By choosing suitable peptization temperature and time, well-dispersed suspensions were obtained. Meanwhile, the particle size, shape and size polydispersity can be efficiently controlled. Nematic ordering is observed in colloidal Ni/Al LDH suspensions and confirmed by birefringence observations and SAXS measurements. Furthermore, we showed that the sol-gel transition takes place after a liquid crystalline phase transition in concentrated Ni/Al LDH suspensions. The absence of isotropic-nematic phase separation can be attributed to the fact that the nematic phase droplets are too small to settle to the bottom of the cuvette.     

Optimization of layered double hydroxide stability and adsorption capacity for anionic surfactants

Low cost adsorption technology offers high potential to clean up laundry rinsing water. From an earlier selection of adsorbents (Schouten et al. 2007), layered double hydroxide (LDH) proved to be an interesting material for the removal of anionic surfactant, linear alkyl benzene sulfonate (LAS) which is the main contaminant in rinsing water. The main research question was to identify the effect of process parameters of the LDH synthesis on the stability of the LDH structure and the adsorption capacity of LAS. LDH was synthesized with the co-precipitation method of Reichle (1986); a solution of M²⁺(NO₃)₂ and M³⁺(NO₃)₃ and a second solution of NaOH and Na₂CO₃ were pumped in a beaker and mixed. The precipitate that was formed was allowed to age and was subsequently washed, dried and calcined. The process parameters that were investigated are the concentration of the initial solutions, M²⁺/M³⁺ ratio and type of cations. The crystallinity can be improved by decreasing the concentration of the initial solutions; this also decreases the leaching of M³⁺ from the brucite-like structure into the water. The highest adsorption capacity is obtained for Mg²⁺/Al³⁺ with a ratio 1 and 2 because of the higher charge density compared to ratio 3. Storing the LDH samples in water resulted in a reduction of adsorption capacity and a decrease in surface area and pore volume. Therefore, LDH is not applicable in a small device for long term use in aqueous surroundings. The adsorption capacity can be maintained during storage in a dry N₂ atmosphere.     

Stabilization of antioxidant gallate in layered double hydroxide by exfoliation and reassembling reaction

As for the stabilization of chemically sensitive bioactive molecule in this study, gallic acid (GA) with antioxidant property was intercalated into interlayer space of layered double hydroxide (LDH), which was realized by exfoliation and reassembling reaction. At first, the pristine nitrate-type Zn₂Al-LDH in solid state was synthesized via co-precipitation followed by the hydrothermal treatment at 80 °C for 6 h, and then exfoliated in formamide to form a colloidal solution of exfoliated LDH nanosheets, and finally reassembled in the presence of GA to prepare GA intercalated LDH (GA-LDH) desired, where the pH was adjusted to 8.0 in order to deprotonate GA to form gallate anion. According to the XRD analysis, GA-LDH showed well-developed (00l) diffraction peaks with a basal spacing of 1.15 nm, which was estimated to be larger than that of the pristine LDH (0.88 nm), indicating that gallate molecules were incorporated into LDH layers with perpendicular orientation. From the FT-IR spectra it was found that gallic acid was completely deprotonated into gallate, and stabilized in between LDH lattices via electrostatic interaction. The content of GA in GA-LDH was determined to be around 23 wt% by UV–vis spectroscopic study, which was also confirmed by HPLC analysis. According to the in-vitro release of GA out of GA-LDH in PBS solution (pH 7.4) at 4 °C, GA was sustainably released from GA-LDH nanohybrid up to 86% within 72 h. The antioxidant property of GA-LDH was almost the same with that of intact GA which was examined by DPPH. The photostability of GA-LDH under UV light irradiation was immensely enhanced compared to intact GA. It is, therefore, concluded that the present GA-LDH nanohybrid can be considered as an excellent antioxidant material with high chemical- and photo-stabilities, and controlled release property.     

Characterization of self-assembled films of NiGa layered double hydroxide nanosheets and their electrochemical properties

In this study, we have demonstrated the synthesis and delamination of a rarely studied NiGa layered double hydroxide (LDH) system. Hydrothermal treatment under agitation conditions at 200 °C for 4 h resulted in the formation of highly crystalline NiGa LDHs in a shorter time than those synthesized without agitation. The LDH was delaminated into the individual nanosheets in formamide. The most significant finding in this study is the electrochemical behavior of interlayer ferricyanide anions intercalated with the layer-by-layer (LBL) assembly method. The morphology of LBL film with one layer is also monitored with atomic force microscopy. The cyclic voltammogram is similar to potassium metal hexacyanoferrate systems with its unique two-peak wave. Raman spectrum of the film revealed that the metal center of the interlayer cyano complex is in interaction with the Ni²⁺ of the host layer. It was concluded that the two-peak cyclic voltammogram of the film is a result of two different forms of the hexacyanoferrate in the interlayer.     

Exfoliation of layered double hydroxide in polystyrene by in-situ atom transfer radical polymerization using initiator-modified precursor

Exfoliated nanocomposite, based on Zn, Al layered double hydroxide (LDH) and polystyrene (PS), has been achieved by in-situ atom transfer radical polymerization reaction from initiator-modified LDH. The exfoliated structure is characterized by X-ray diffraction and transmission electronic microscope. The results suggest that the exfoliated ZnAl(DS) LDH sheets with a thickness of less than 1 nm disperse individually in the PS matrix, and the thermal stability of the nanocomposite shows a marked improvement. When the 50 wt% weight loss is selected as a comparison point, the decomposition temperature of PS/LDH nanocomposite is about 45 °C higher than that of pure PS.     

Fabrication of novel molecular recognition membranes by physical adsorption and self-assembly for surface plasmon resonance detection of TNT

Recent concern on international terrorism and weapons of mass destruction demands the development of novel analytical methods for identification and quantification of explosive molecules. In this article, we describe the development of high-performance immunosensors for detection of 2,4,6-trinitrotoluene (TNT), a prime component of the landmines and bombs used by terrorist and military forces. The immunosensors were constructed by physical adsorption and self-assembly methods, and their binding interactions with a monoclonal anti-TNT antibody were evaluated for TNT detection using the surface plasmon resonance technique. A home-made 2,4,6-trinitrophenyl-keyhole limpet hemocyanine conjugate was used for physical adsorption. A poly(ethylene glycol) hydrazine hydrochloride thiolate was used in the construction of self-assembled monolayer surface and was immobilized with trinitrophenyl-β-alanine by the amide coupling method. The immunosensors were highly selective, regenerable, rapid, and exhibited remarkable sensitivity down to the parts-per-trillion level for TNT by the indirect competitive inhibition principle.