Crystallization and the electrical conductivity of vanadate glass

The common formula of the minerals franckeite, cylindrite and potosiite is known to be w PbS × SnS₂ y FeS z Sb₂S₃. The tin Mössbauer spectra showed the existence of two Sn(IV) and two Sn(II) species, and the iron spectra one high spin Fe(II) and two Fe(III) species. For antimony, only one Sb(III) phase is present, except in potosiite where also 20 % of Sb(V) were found. The mineralogical relationships within this group were confirmed by the Mössbauer spectroscopical results.     

Electrical conductivity and local structure of lithium tin iron vanadate glass

A relationship between electrical conductivity (σ) and local structure of 15Li₂O·10Fe₂O₃·xSnO₂·(70–x)V₂O₅·5P₂O₅ glass (x = 0–20 mol%), abbreviated as xLFSVP glass, was investigated by ⁵⁷Fe- and ¹¹⁹Sn-Mössbauer spectroscopies, differential thermal analysis (DTA) and dc-four probe method. A small increase in quadrupole splitting (Δ) for Fe^III was observed from 0.70 to 0.74_{± 0.02} mm s^???1 with an increase of “x”, whereas isomer shift (Δ) values of 0.40_±0.01 mm s^???1 were independent of “x”. This result suggests that local distortion of Fe^IIIO₄ tetrahedra was slightly increased in SnO₂-containing vanadate glasses, which was reflected as an increase in glass transition temperature (T_g) from 266 to 285_±5 °C. A slope of 675 K / (mm s^???1) obtained in ‘T_g vs. Δ plot’ proved that Fe^III occupied the site of network former (NWF). An isothermal annealing of 10LFSVP glass at 500 °C for 100 min resulted in a marked decrease of Δ from 0.72 to 0.56_±0.02 mm s^???1, indicating that local distortion of FeO₄ tetrahedra was reduced by the structural relaxation of 3D-network. In contrast, identical δ and Δ values of 0.07_±0.01 and 0.53_±0.02 mms^???1, respectively, were observed in ¹¹⁹Sn-Mössbauer spectra of 10LFSVP glass before and after the annealing. These results indicate that Sn^IVO₆ octahedra are loosely bound in the glass matrix as a network modifier (NWM). A marked increase in σ from 7.4 × 10^???7 to 9.1 × 10^???3 S cm^???1 was observed in 20LFSVP glass after the isothermal annealing, indicating that structural relaxation of 3D-network evidently causes a marked increase in σ.     

Electrical conductivity and local structure of lithium iron tungsten vanadate glass

A relationship between physical properties and local structure of 20Li₂O·10Fe₂O₃·xWO₃·(70–x)V₂O₅ glass, abbreviated as xLFWV glass (x?=?0???25 in mol%), was investigated by ⁵⁷Fe-Mössbauer spectroscopy, Fourier transform infrared spectroscopy (FT-IR), differential thermal analysis (DTA), leaching test using 20 vol% HCl and DC two- or four-probe method. ⁵⁷Fe-Mössbauer spectra of xLFWV glass showed an increase of quadrupole splitting (Δ) from 0.67 to 0.73_±0.02 mm s^???1 and a constant isomer shift (δ) of 0.39_±0.01 mm s^???1 with an increase of ‘x’ from 0 to 25. This suggests that Fe^IIIO₄ tetrahedra gradually increase their local distortion along with a substitution of WO₃ for V₂O₅. DTA of xLFWV glass showed an increase in glass transition temperature (T _g) from 252 to 298 $_{\pm 5}^{\circ}$ C with an increase of ‘x’. Composition dependency of T _g and Δ indicates that Fe^III atoms occupy substitutional sites of WO₆ octahedra as network former (NWF), since a large slope of 680 K (mm s^???1)^???1 was obtained in T _g ? Δ plot. Comparable electrical conductivities (σ) of 2.5 × 10^???6, 1.9 × 10^???6, 8.4 × 10^???7 and 2.9 × 10^???6 S cm^???1 obtained for xLFWV glasses with ‘x’ of 0, 10, 20 and 25, respectively increased to 2.4 × 10^???2, 2.4 × 10^???3, 3.5 × 10^???4 and 8.8 × 10^???5 S cm^???1 after annealing at 400 °C for 100 min. Smaller Δ values of 0.58 and 0.67_±0.02 mm s^???1 obtained in annealed xLFWV glasses with ‘x’ of 0 and 10, respectively indicate that structural relaxation occurs in VO₄ units of vanadate glass units, as had been observed in other vanadate glasses.     

Effect of plasticizer on microstructure and electrical properties of a sodium ion conducting composite polymer electrolyte

A plasticized composite polymer electrolyte (PCPE) based on Poly (ethylene oxide) + NaI with Na₂SiO₃ as the ceramics filler and Poly (ethylene glycol) as the plasticizer has been prepared by solution cast technique. Effect of plasticization on microstrucutre and electrical properties of the materials has been investigated. The changes in the structural and microstructural properties of the material have been investigated by XRD and SEM studies. The electrical conductivity estimated using a. c. impedance spectroscopy was found to be dependent on plasticizer concentration. An enhancement in the ionic conductivity value by three times has been recorded on addition of plasticizer when compared with that of unplasticized composite polymer electrolyte. The temperature dependence of conductivity of the polymer films is found to obey the Arrhenius behavior below and above the melting temperature of PEO. The electrical transport has been found to be a thermally activated process with ions being the predominant charge carrier.     

Thermal effects on optical properties of silver ruby glass

2 O·10 CaO·74 SiO₂ mol%) glass doped with 0.11 and 0.35 wt.% silver are investigated. Heating treatments are carried out in a temperature range between 400 and 575 °C for times ranging from 30 to 300 min in different atmospheres and cooling rates. The starting glasses show a colourless and transparent appearance, but after thermal treatments under a reducing atmosphere become coloured, confirming the presence of silver colloids related to the 410-nm absorption band. On the other hand, the main effects of thermal treatments on the PL spectra concern those from samples treated in a reducing atmosphere. Thus, the intensity of both excitation and emission spectra chiefly diminishes in the 220–230 nm and 325–350 nm ranges, respectively. In addition, time-resolved spectra show the main ultraviolet (UV) emission centred above 330 nm upon excitation with 228-nm light. In contrast to the starting glass, we notice no shift or even slight shifts of the peak position to longer wavelengths with increasing delay time after pulse excitation, even for delay times as short as 0.01 ms. The results are discussed on the basis of transitions in which Ag⁺ ions are involved. Received: 6 February 1998/Accepted: 9 March 1998     

From silver nanoparticles to thin films: Evolution of microstructure and electrical conduction on glass substrates

Silver nanoparticles embedded in a dielectric matrix are investigated for their potential as broadband-absorbing optical sensor materials. This contribution focuses on the electrical properties of silver nanoparticles on glass substrates at various morphological stages. The electrical current through thin films, consisting of silver nanoparticles, was characterized as a function of film thickness. Three distinct conductivity zones were observed. Two relatively flat zones (“dielectric” for very thin films and “metallic” for films thicker than 300-400 Å) are separated by a sharp transition zone where percolation dominates. The dielectric zone is characterized by isolated particle islands with the electrical conduction dominated by a thermally activated tunneling process. The transition zone is dominated by interconnected silver nanoclusters—a small increase of the film thickness results in a large increase of the electrical conductivity. The metallic conductivity zone dominates for thicknesses above 300-400 Å.     

Preparation and properties of GAGG:Ce/glass composite scintillation material

The translucent GGAG:Ce/glass composites are prepared successfully by ball-milling, tableting, and pressureless sintering. The thickness of composites is about 400 μm. The x-ray diffraction(XRD), differential scanning calorimetry(DSC), density of composite materials are measured and discussed systematically. The scanning electron microscopy(SEM) and energy dispersive spectrometer(EDS) elemental mapping are employed to analyze the particle size, the shape of powders, and the distribution of GGAG:Ce particles in the glass matrix, respectively. The decay time, ultraviolet,(UV),x-ray excitation luminescence spectra, and temperature spectra are studied. The results show that the composite materials have high light output, good thermostability, and short decay time. The method adopted in this work is an effective method to reduce the preparation time and cost of the sample. The ultralow afterglow indicates that the composite materials have an opportunity to be used for x-ray detection and imaging.     

玻璃基底上不规则银纳米结构的生长及其光学性质的研究

以经过硅烷化后玻璃片为基底,之后吸附金纳米种子,采用柠檬酸钠为还原剂,在荧光灯照射条件下还原硝酸银,制备出基底表面具有银纳米粒子聚集结构的材料。采用透射电镜、扫描电镜和紫外可见分光光度计对产物的形貌和性质进行了表征,并考察银纳米粒子的形貌对其薄膜基底SERS活性的影响。结果表明：随着光照时间增加至16 h,金种子长大为平均粒径110 nm的不规则状多晶银纳米粒子,且出现双层粒子堆积。基底上纳米粒子的吸收光谱上出现了由银粒子的表面等离子体激元偶极子耦合引发的强烈吸收峰：随着光照时间的变化,耦合峰在600～813 nm波段内移动。光照时间为12 h后得到的SERS活性基底具有最强的SERS信号。     

玻璃基底上不规则银纳米结构的生长及其光学性质的研究

以经过硅烷化后玻璃片为基底,之后吸附金纳米种子,采用柠檬酸钠为还原剂,在荧光灯照射条件下还原硝酸银,制备出基底表面具有银纳米粒子聚集结构的材料。采用透射电镜、扫描电镜和紫外可见分光光度计对产物的形貌和性质进行了表征,并考察银纳米粒子的形貌对其薄膜基底SERS活性的影响。结果表明：随着光照时间增加至16 h,金种子长大为平均粒径110 nm的不规则状多晶银纳米粒子,且出现双层粒子堆积。基底上纳米粒子的吸收光谱上出现了由银粒子的表面等离子体激元偶极子耦合引发的强烈吸收峰：随着光照时间的变化,耦合峰在600～813 nm波段内移动。光照时间为12 h后得到的SERS活性基底具有最强的SERS信号。     

Structural and electrical study of Ce-substituted bismuth vanadate

Samples of Ce^IV-substituted bismuth vanadate, formulated as Bi₄Ce_xV_2−xO_{11−(x/2)−δ}; 0≤x≤0.30, were synthesized by solid-state reactions. The phase structure and electrical conductivity were investigated using X-ray powder diffraction, FT-IR, differential thermal analysis and AC impedance spectroscopy. For a low composition range, two phase transitions, α↔β and β↔γ, were exhibited in which the system mimics in most events the parent compound. Impedance analysis evidenced no relationship between the blocking effect of charge carriers and structural changes at ambient temperatures. However, the temperature dependence of conductivity was correlated with the stability region of various phases within the system.     

Optical properties of composite thin films containing silver nanoparticles

Absorption and reflection of electromagnetic radiation by a composite thin film consisting of a transparent dielectric matrix with inclusions of metal nanoparticles of radius much less than the wavelength were theoretically investigated based on the Maxwell–Garnett model. The absorption, reflection, and transmission of optical radiation in such a dielectric composite film were analyzed using effective optical parameters for the refractive index and absorption coefficient that depended on the nanoparticle size.     

Femtosecond pump-probe investigation of ultrafast silver nanoparticle deformation in a glass matrix

Single-color femtosecond pump-probe experiments were performed to investigate the time dependence of laser-induced ultrafast desorption and deformation processes of silver nanoparticles in glass. After laser excitation at wavelengths close to the surface plasmon resonance, transient extinction changes were found to exhibit dynamics on quite different time scales ranging from sub-picoseconds to some hundred ps. The slowest observed decay component is identified as characteristic for the deformation/desorption processes. Possible mechanisms for these processes are discussed. Received: 3 April 2000 / Revised version: 3 July 2000 / Published online: 20 September 2000     

聚苯胺-碳纳米管复合体的制备及其光响应

纳米尺寸导电材料对功能分子材料及分子器件的作用越来越显得重要.采用原位乳液聚合法制备聚苯胺 碳纳米管复合体，SEM和TEM照片显示复合管的直径为60—70nm，聚苯胺的包裹层厚度约25—30nm.x射线衍射及热分析表明纳米复合管的结晶性能增强，热稳定性得到提高.光电响应试验表明复合管的光吸收增强，光电流增大，说明聚苯胺 碳纳米复合管薄膜受光照射后发生了光诱导电荷分离现象. 关键词： 聚苯胺 碳纳米管 复合纳米管 光电流     

Defect structure and electrical properties of molybdenum disulphide

Electrical conductivity of molybdenum disulphide was studied in a helium-sulphur gas mixture as a function of temperature (1073-1273 K). It was found that over the whole temperature and sulphur pressure range (10-6600 Pa) studied, the material exhibits p-type conductivity. Based on literature intrinsic electronic disorder data as well as measured electrical conductivity results a defect model has been proposed. This model involves electron holes and doubly ionized interstitial sulphur ions as majority point defects as well as electrons and acceptor-type foreign ions as minority defects.     

Observation of nonlinear saturable and reverse-saturable absorption in silver nanowires and their silica gel glass composite

Silver nanowires (Ag NWs) and their silica gel glass composite were produced. Their nonlinear optical (NLO) properties, mainly saturable absorption (SA) and reverse-saturable absorption (RSA), were investigated at 532 and 1064 nm, using the open aperture z-scan technique and a nanosecond-pulsed laser. We found that Ag NWs demonstrate rather different NLO behaviors in liquid and solid-state matrices. The Ag NWs suspension exhibited only RSA, whereas a transformation from SA to RSA occurred in the silica gel glass composite. The underlying mechanism was proposed from the viewpoint of different environments and electronic dynamics of Ag NWs in the liquid and solid-state matrices.     

银纳米颗粒/多孔硅复合材料的制备与气敏性能研究

采用双槽电化学腐蚀法以电阻率为10-15 Ω·cm的p型<100>晶向的单晶硅片制备了孔径约为1.5 μm, 孔深约为15-20 μm的p型多孔硅, 并以此多孔硅作为基底采用无电沉积法通过调控沉积时间在其表面沉积了不同厚度的银纳米颗粒薄膜. 采用扫描电子显微镜和X 射线衍射仪表征了银纳米颗粒/多孔硅复合材料的形貌和微观结构, 结果表明银纳米颗粒较均匀的分布于多孔硅的表面上且沉积时间对产物的形貌有重要影响. 采用静态配气法在室温下研究了银纳米颗粒/多孔硅复合材料对NH₃的气敏性能. 气敏测试结果表明沉积时间对产物的气敏性能影响较大. 当沉积时间较短时, 适量银纳米颗粒掺杂的多孔硅复合材料由于其较高的比表面积以及特殊的形貌和结构, 对NH₃气体表现出较高的灵敏度、优良的响应/恢复性能. 室温下, 其对50 ppm 的NH₃气体的气敏灵敏度可以达到5.8左右.     

Influence of functionalization on mechanical and electrical properties of carbon nanotube-based silver composites

In this study, we have extended the molecular-level mixing method to fabricate multiwall carbon nanotube (CNT)-reinforced silver nanocomposites. The multiwall nanotubes used in the synthesis process were dispersed by two ways viz. covalent and non-covalent functionalization techniques. To elucidate the comparative effects of functionalization, structural, mechanical and electrical properties of nanocomposites were evaluated before and after sintering. The structural characterization revealed that the nanotubes were embedded, anchored and homogenously dispersed within the silver matrix. Hardness and Young’s modulus of nanotube-reinforced nanocomposite were increased by a factor of 1–1.6 times than that of pure silver, even before and after the sintering. Covalently functionalized nanotube-based composites have shown more enhanced mechanical properties. The CNT reinforcement also improved the electrical conductivity of low-conducting nanosilver matrix before sintering. Non-covalently functionalized nanotube-based nanosilver composites showed more increased electrical conductivity before sintering. But a negative reinforcement effect was observed in high-conducting bulk silver matrix after the sintering. Thus, covalent functionalization might be appropriate for mechanical improvement in low-strength materials. However, non-covalent functionalization is suitable for electrical enhancement in low-conducting nanomaterials.     

Nonlinear optical properties of nanometer-size silver composite azobenzene containing polydiacetylene film

Diacetylene monomer containing p-nitrophenyl azobenzene moiety (NADA) was synthesized. Silver nanoparticles with different concentrations were adulterated in the above polymerized NADA (PNADA) films and the third-order nonlinear optical properties were investigated in detail. UV–vis spectra and transmission electron microscopy were used to confirm the formation of PNADA/Ag nanocomposite films. The silver nanoparticles (average size of 10 nm) were well dispersed in the polymer films. The value of the nonlinear refractive index n ₂ for PNADA films (8.48×10⁻¹⁵ cm²/W) was much higher than that of pure polydiacetylene films. Further, the introduction of silver nanoparticles into the PNADA polymer films led to the further enhancement of nonlinear optical properties. The maximum value of n ₂ for PNADA/Ag nanocomposite films could be 11.6×10⁻¹⁵ cm²/W. This enhancement should be ascribed to the surface plasmon resonance of silver nanoparticles.