Dinuclear ruthenium(I) complexes of the type [Ru2(CO)4L2] with carboxylate or 2-pyridonate ligands: Evaluation as catalysts for olefin cyclopropanation with diazoacetates

Dinuclear ruthenium(I,I) carboxylate complexes [Ru₂(CO)₄(μ-OOCR)₂]_n (R = CH₃ (1a), C₃H₇ (1b), H (1c), CF₃ (1d)) and 2-pyridonate complex [Ru₂(CO)₄(μ-2-pyridonate)₂]_n (3) catalyze efficiently the cyclopropanation of alkenes with methyl diazoacetate. High yields are obtained with terminal nucleophilic alkenes (styrene, ethyl vinyl ether, α-methylstyrene), medium yields with 1-hexene, cyclohexene, 4,5-dihydrofuran and 2-methyl-2-butene. The E-selectivity of the cyclopropanes obtained from the monosubstituted alkenes and the cycloalkenes decreases in the order 1b > 1a > 1d > 1c. The cyclopropanation of 2-methyl-2-butene is highly syn-selective. Several complexes of the type [Ru₂(CO)₄(μ-L¹)₂]₂ (4) and (5), [Ru₂(CO)₄(μ-L¹)₂L²] (L² = CH₃OH, PPh₃) (6)–(9) and [Ru₂(CO)₄(CH₃CN)₂(μ-L¹)₂] (10) and (11), where L¹ is a 6-chloro- or 6-bromo-2-pyridonate ligand, are also efficient catalysts. Compared with catalyst 3, a halogen substituent at the pyridonate ligand affects the diastereoselectivity of cyclopropanation only slightly.     

Synthesis,characterization and fluorescence properties of hexanuclear zinc(II) complexes

Two hexanuclear zinc(II) complexes, [Zn₆(L¹)₂(μ₂-OH)₂(μ₂-CH₃COO)₈] · CH₃CN (1 · CH₃CN) and [Zn₆(L²)₂(μ₂-OH)₂(μ₂-CH₃COO)₈] · 4CH₃CN (2 · 4CH₃CN), where HL¹ = 4-methyl-2,6-bis(cyclohexylmethyliminomethyl)-phenol and HL² = 4-methyl-2,6-bis(1-naphthalylmethyliminomethyl)-phenol, have been synthesized and characterized by elemental analysis, FT-IR and fluorescence spectroscopic methods, and by X-ray diffraction analysis. In the asymmetric unit of complex 1, two of the three zinc atoms have pentacoordinate geometries and the other is tetrahedrally coordinated, whereas the three distinct Zn atoms in complex 2 adopt three different coordination environments, namely distorted octahedral, trigonal bipyramidal and tetrahedral. The fluorescence properties of the ligands and complexes have been investigated.     

Syntheses and properties of NCN-bridged tri- and tetranuclear complexes of cobalt and rhodium

The reaction of [Cp¹CoI₂]₂ (1b) with 2 equiv of NaNCNH affords the 16-membered macrocyclic NCNH-bridged tetracobalt(III) complex [Cp¹CoI(μ₂-NCNH-N,N′)]₄ (2b), while that with 2 equiv of Na₂NCN yields the C₃-elongated cubane-like NCN-bridged tetracobalt(III) complex [Cp¹Co(μ₃-NCN-N,N,N′)₃(CoCp¹)₃(μ₃-NCN-N,N,N)] (4b). Treatment of [Cp¹RhCl₂]₂ (1c) with 2 equiv of NaNCNH gives the C₃-elongated cubane-like tetrarhodium(III) complex [Cp¹Rh(μ₃-NCN-N,N,N′)₃(RhCp¹)₃(μ₃-NCN-N,N,N)] (4c) via the macrocyclic complex [Cp¹RhCl(μ₂-NCNH-N,N′)]₄ (2c). On the other hand, the reaction of [Cp¹CoCl]₂ (7) with Na₂NCN affords the anionic bis(NCN)-capped tricobalt(II) complex Na[(Cp¹Co)₃(μ₃-NCN-N,N,N)₂] (6). The molecular structures of complexes 2b · CH₂Cl₂ and 4c · 2C₆H₆ have been confirmed by X-ray analyses. The electrochemical properties of these types of NCN-bridged group 9 metal complexes have also been examined.     

Mono(amidinate) rare earth metal bis(alkyl) complexes: Synthesis,structure and their activity for l-lactide polymerization

Alkane elimination reaction between Ln(CH₂SiMe₃)₃(THF)₂ (Ln = Y, Lu) with one equivalent of the amidines with different steric demanding HL ([CyC(N-2,6-ⁱPr₂C₆H₃)₂]H (HL₁), [CyC(N-2,6-Me₂C₆H₃)₂]H (HL₂), [PhC(N-2,6-Me₂C₆H₃)₂]H (HL₃)) in THF afforded a series of mono(amidinate) rare earth metal bis(alkyl) complexes [CyC(N-2,6-ⁱPr₂C₆H₃)₂]Ln(CH₂SiMe₃)₂(THF) (Ln = Y (1), Lu (3)), [CyC(N-2,6-Me₂C₆H₃)₂]Ln(CH₂SiMe₃)₂(THF)₂ (Ln = Y (4), Lu (6)), and [PhC(N-2,6-Me₂C₆H₃)₂]Y(CH₂SiMe₃)₂(THF)₂ (7) in 75–89% isolated yields. For the early lanthanide metal Nd, THF slurry of NdCl₃ was stirred with three equiv of LiCH₂SiMe₃ in THF, followed by addition of one equiv of the amidines HL₁ or HL₂ gave an “ate” complex [CyC(N-2,6-ⁱPr₂C₆H₃)₂]Nd(CH₂SiMe₃)₂(μ-Cl)Li(THF)₃ (2) in 48% yield and a neutral [CyC(N-2,6-Me₂C₆H₃)₂]Nd(CH₂SiMe₃)₂(THF)₂ (5) in 52% yield, respectively. They were characterized by elemental analysis, FT-IR, NMR spectroscopy (except for 2 and 5 for their strong paramagnetic property). Complexes 2, 3, 4 and 5 were subjected to X-ray single crystal structure determination. These neutral mono(amidinate) rare earth metal bis(alkyl) complexes showed activity towards l-lactide polymerization to give high molecular weight and narrow molecular weight distribution polymers.     

Mono- and di-nuclear complexes of thiosemicarbazones with copper(I): Synthesis,spectroscopy and structures

Reactions of copper(I) halides with a series of thiosemicarbazones, namely, benzaldehyde thiosemicarbazone (R¹R²CN–NH–C(S)–NH₂, R¹ = Ph, R² = H; Hbtsc), 2-benzoylpyridine thiosemicarbazone (R¹ = Ph, R² = py; Hbpytsc), and acetone thiosemicarbazone (R¹ = R² = Me; Hactsc), in the presence of PPh₃ has formed dimeric complexes, viz. sulfur bridged [Cu₂(μ-S-Hbtsc)₂Br₂(PPh₃)₂]·2H₂O (1), iodo-bridged [Cu₂(μ-I)₂(η¹-S-Hbtsc)₂(PPh₃)₂] (2), and heterobridged [Cu₂(μ₃-S,N³-Hactsc)(η¹-Br)(μ-Br)(PPh₃)₂] (3), as well as mononuclear complexes [CuX(η¹-S-Hbpytsc)(PPh₃)₂]·CH₃CN (X = Br, 4; Cl, 5). Complexes 1, 2, 4 and 5 involve thiosemicarbazone ligands in η¹-S bonding mode while in compound 3, ligand acts in N³, S-chelation-cum-S-bridging mode (μ₃-S,N³ mode). The intermolecular interactions such as, N²H?X, HN¹H?X (X = S, Br, Cl), CH?π interactions lead to 2D networks. All the complexes have been characterized with the help of elemental analyses, IR, ¹H, and ³¹P NMR spectroscopy, and single crystal X-ray crystallography. The role of a solvent in alteration of nuclearity and bonding modes of complexes has been highlighted.     

Synthesis and characterization of thiosemicarbazone derivatives of 2-chloro-4-hydroxy-benzaldehyde and their rhenium(I) complexes

N-Thioamide thiosemicarbazone derived of 2-chloro-4-hydroxy-benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in chloroform gave the adducts [ReX(CO)₃(HL)] (1a X = Cl, R = H; 1a′ X = Br, R = H; 1b X = Cl, R = CH₃; 1b′ X = Br, R = CH₃; 1c X = Cl, R = Ph; 1c′ X = Br, R = Ph) in good yield. Complexes 1a′ and 1b’ were also obtained by the reaction of HL¹ and HL³ with [ReBr(CO)₅] in toluene.All the compounds have been characterized by elemental analysis, mass spectrometry (FAB), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³ and 1a·H₂O were also established by X-ray diffraction. In 1a, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms, forming a five-membered chelate ring, as well as three carbonyl carbon and chloride atoms. The resulting coordination polyhedron can be described as a distorted octahedron.The study of the crystals obtained by slow evaporation of methanol and DMSO solutions of the adducts 1a′ and 1b, respectively, showed the formation of dimer structures based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆]·3H₂O (2a)·3H₂O and [Re₂(L²)₂(CO)₆]·(CH₃)₂SO (2b)·2(CH₃)₂SO. Amounts of these thiosemicarbazonate complexes [Re₂(L)₂(CO)₆] (2) were obtained by reaction of the corresponding free ligands with [ReCl(CO)₅] in dry toluene.In 2a·3H₂O and 2b·2(CH₃)₂SO the dimer structures are established by Re–S–Re bridges, where S is the thiolate sulphur from a N,S-bidentate thiosemicarbazonate ligand. In both structures the rhenium coordination sphere is similar; the dimers are in the same diamond Re₂S₂ face.     

Synthesis and X-ray structures of heptanuclear and decanuclear mixed-metal sulfido clusters containing noble metals and Group 15 metals

Reactions of incomplete cubane-type clusters [(Cp°RuCl)₂(μ-SH)(μ-SM′Cl₂)] (M′ = Sb (2a), Bi; Cp° = η⁵-C₅Me₄Et) with 0.5 equiv of [PdCl₂(cod)] (cod = 1,5-cyclooctadiene) afforded the corner-shared double cubane-type clusters [{(Cp°Ru)(Cp°RuCl)(μ-SM′Cl₂)}₂(μ₃-S)₂(μ-Cl)₂Pd] (3a: M′ = Sb, 3b: M′ = Bi) in moderate yields, whereas treatment of 2a with 0.75 equiv of [PdCl₂(cod)] gave the corner-shared triple cubane-type cluster [{(Cp°Ru)(Cp°RuCl)(μ-SSbCl₂)(μ₃-S)₂(μ-Cl)₂Pd}₂(Cp°Ru)₂] (4). Single-crystal X-ray analyses have disclosed the detailed structures of novel heptanuclear and decanuclear mixed-metal cores for 3a and 4, respectively.     

Synthesis,spectroscopy and structures of halogen and sulfur-bridged dinuclear silver(I) complexes with N1-substituted thiophene-2-carbaldehyde thiosemicarbazone

The reactions of silver(I) halides (Cl or Br) with thiophene-2-carbaldehyde N¹-methyl thiosemicarbazone (HttscMe) in the presence of Ph₃P (1:1:1 molar ratio) yield halogen-bridged dimers, [Ag₂(μ-X)₂(η¹-S-HttsMe)₂(PPh₃)₂] (X = Cl, 1; Br, 2). The use of 2,2′-bipyridine in lieu of Ph₃P in the reaction of silver(I) chloride with HttscMe yields the sulfur-bridged dimer, [Ag₂(μ-S-HttscMe)₂(η¹-HttsMe)₂] · 2CHCl₃ 3. The substituents have altered the nature of bridge between the two silver atoms. The Ag···Ag separation (3.4867(5) Å) in complex 3 is less than that in the halogen-bridged dimers (3.734(4) Å 1; 3.746(5) Å 2). Unlike PPh₃ the co-ligand 2,2′-bipyridine did not coordinate to the silver center, but was necessary for crystallization in the reaction with the thio-ligand. NMR spectroscopy revealed that the complexes remained unchanged in the solution state (CDCl₃).     

Trinuclear copper(I) complex of 1,3-bis(2-pyridinylmethyl)imidazolylidene as a carbene-transfer reagent for the preparation of catalytically active nickel(II) and palladium(II) complexes

Reactions of 1,3-bis(pyridin-2-ylmethyl)-1H-imidazol-3-ium hexafluorophosphate, ([HL1](PF₆), L1 = 1,3-bis(pyridin-2-ylmethyl)imidazolylidene) and 1,3-bis(pyridin-2-ylmethyl)-1H-benzimidazol-3-ium hexafluorophosphate ([HL2](PF₆), L2 = 1,3-bis(pyridin-2-ylmethyl)benzoimidazolylidene) with cuprous oxide in acetonitrile readily yielded trinuclear complexes [Cu₃(L1)₃(PF₆)₃] (1) and [Cu₃(L2)₃(PF₆)₃] (2). Treatment of 1 with Ni(PPh₃)₂Cl₂ and Pd(cod)Cl₂ gave [Ni(L1)Cl](PF₆) (3) and [Pd(L1)Cl](PF₆) (4), respectively, due to transmetalation. [Ni(L1)₂](PF₆)₂ (5) was obtained from the reaction of [Cu₃(L1)₃(PF₆)₃] and Raney nickel in acetonitrile. All these complexes have been fully characterized. Both 1 and 2 consist of a triangular Cu₃ core with each Cu–Cu bond capped by an imidazolylidene group. Each imidazolylidene acts as a bridging ligand in a μ₂ mode and is bonded equally to two Cu(I) ions. The pincer nickel and palladium complexes are square-planar and contain a tridentate NCN ligand. Complexes 3 and 4 are efficient catalyst precursors for Kumada–Corriu and Suzuki–Miyaura coupling reactions of aryl halides with organometallic reagents.     

Spectroscopy,thermal and structural studies of new ZnII coordination polymer, [Zn3(μ-bpa)4.5(AcO)3](ClO4)3·4.26H2O

Three Zn^II coordination polymers with acetate and perchlorate anions, [Zn₃(μ-bpa)_4.5(AcO)₃](ClO₄)₃·4.26H₂O (1), [Zn₂(μ-bpe)₃(AcO)₂](ClO₄)₂ (2) and [Zn₂(bpe)(AcO)₄] (3), bpa = 1,2-bis(4-pyridyl)ethane and bpe = 1,2-bis(4-pyridyl)ethene, have been synthesized and characterized by elemental analysis, IR, ¹H NMR, and ¹³C NMR spectroscopies, and the structure of compound 1 was determined by single-crystal X-ray diffraction. The thermal stabilities of compounds 1–3 were studied by thermal gravimetric (TG) and differential thermal analyses (DTA). The structural studies of compound 1 show that the structure may be considered as a three-dimensional coordination polymer of zinc(II) with large voids filled with disordered water molecules. The stability of the porous networks after removal of the guest water molecules is confirmed by X-ray powder diffraction.     

Synthesis,structure and characterization of new 1D and 2D Ni(II) coordination polymers

Two new Ni(II) coordination polymers, namely [Ni₃(Hsdac)₂(sdac)₂(2,2′-bipy)₂] (1) and [Ni₂(sdac)₂(4,4′-bipy)₂]·2H₂O (2) (sdba = 4,4′-sulfonyldibenzoate, 2,2′-bipy = 2,2′-bipyridine, 4,4′-bipy = 4,4′-bipyridine), have been prepared under hydrothermal conditions and characterized by single crystal X-ray diffraction analyses. Compound 1 possesses an interesting chain structure. Adjacent chains are further linked through H-bond interactions between Hsdac ligands to give a two-dimensional (2D) supramolecular architecture. Compound 2 displays an unusual 2D polyrotaxane-like network.     

Trinuclear copper(I) complex of 1,3-bis(2-pyridinylmethyl)imidazolylidene as a carbene-transfer reagent for the preparation of catalytically active nickel(II) and palladium(II) complexes

Reactions of 1,3-bis(pyridin-2-ylmethyl)-1H-imidazol-3-ium hexafluorophosphate, ([HL1](PF₆), L1 = 1,3-bis(pyridin-2-ylmethyl)imidazolylidene) and 1,3-bis(pyridin-2-ylmethyl)-1H-benzimidazol-3-ium hexafluorophosphate ([HL2](PF₆), L2 = 1,3-bis(pyridin-2-ylmethyl)benzoimidazolylidene) with cuprous oxide in acetonitrile readily yielded trinuclear complexes [Cu₃(L1)₃(PF₆)₃] (1) and [Cu₃(L2)₃(PF₆)₃] (2). Treatment of 1 with Ni(PPh₃)₂Cl₂ and Pd(cod)Cl₂ gave [Ni(L1)Cl](PF₆) (3) and [Pd(L1)Cl](PF₆) (4), respectively, due to transmetalation. [Ni(L1)₂](PF₆)₂ (5) was obtained from the reaction of [Cu₃(L1)₃(PF₆)₃] and Raney nickel in acetonitrile. All these complexes have been fully characterized. Both 1 and 2 consist of a triangular Cu₃ core with each Cu–Cu bond capped by an imidazolylidene group. Each imidazolylidene acts as a bridging ligand in a μ₂ mode and is bonded equally to two Cu(I) ions. The pincer nickel and palladium complexes are square-planar and contain a tridentate NCN ligand. Complexes 3 and 4 are efficient catalyst precursors for Kumada–Corriu and Suzuki–Miyaura coupling reactions of aryl halides with organometallic reagents.     

Supramolecular chemistry and the control of the crystallization behavior by the choice of the counter-ion. Part 11. The stereochemistry and crystallization architecture of [(tren)Co(NO2)2]A (I), [(tren)Co(ox)]A (II), [(en)2Co(ox)]A (III) and [trans-(pn)2Co(NO2)2]A (IV), with A = [trans-(NH3)2Co(NO2)4]

In continuation of studies carried out previously [I. Bernal, Inorg. Chim. Acta 96 (1985) 99; I. Bernal, Inorg. Chim. Acta (1986) 121; I. Bernal, E.O. Schlemper, C.K. Fair, Inorg. Chim. Acta 115 (1986) 25; I. Bernal, Inorg. Chim. Acta 101 (1985) 175; I. Bernal, J. Cetrullo, J. Coord. Chem. 20 (1989) 237], we have now expanded the nature and number of cations associated with the [trans-(NH₃)₂Co(NO₂)₄] anion in order to better document when, and how, this helical propeller species crystallizes as a conglomerate.[(tren)Co(NO₂)₂][trans-(NH₃)₂Co(NO₂)₄] (I) crystallizes as a racemate in space group P2₁/n with cell constants of a = 15.8900(2), b = 19.7800(3), c = 26.6200(4) Å, β = 101.970(3)°, z = 15.[(tren)Co(ox)][trans-(NH₃)₂Co(NO₂)₄] (II) crystallizes as a racemate in space group I2/a with cell constants of a = 21.592(11), b = 7.050(4), c = 26.46(2) Å, β = 93.09(6)°, z = 8.[(en)₂Co(ox)][trans-(NH₃)₂Co(NO₂)₄] (III) crystallizes as a racemate in space group P2₁/n with cell constants of a = 6.4740(1), b = 22.8950(6), c = 13.1660(3) Å, β = 97.3310(10)°, z = 4.[trans-(pn)₂Co(NO₂)₂][trans-(NH₃)₂Co(NO₂)₄] (IV) also crystallizes as a racemate in space group P(¯1; no. 2) with cell constants of a = 6.508(2), b = 8.829(5), c = 9.851(5) Å, α = 72.84(2), β = 80.15(3), and γ = 81.45(6)°, z = 1.The most notable results are as follows: (1) all four compounds studied are racemates unlike the previously studied [cis-Co(en)₂(NO₂)₂][trans-(NH₃)₂Co(NO₂)₄] [I. Bernal, Inorg Chim Acta 101 (1985) 175] (V) and K[trans-(NH₃)₂Co(NO₂)₄] (VI) that crystallize as conglomerates. Nevertheless, they share certain crystalline features, which are readily observed in their packing diagrams.In all the four cases the new data were collected at 295 K and 120 K, using Mo Kα radiation; the former with a Nonius CAD-4 diffractometer and the latter with a Nonius CCD instrument. Of primary interest to us are the changes in packing caused by repeated changes in the charge compensating cations. Comparisons with the packing observed previously in [cis-Co(en)₂(NO₂)₂][trans-(NH₃)₂Co(NO₂)₄] (V) and K[trans-(NH₃)₂Co(NO₂)₄] (VI) are made since, at the time of publications of those early papers, no detailed study of the packing characteristics of these anions was published and the existing graphic software were primitive compared with the current packages. This oversight is remedied below.     

New thioether–dithiolate complexes of Cp1Ir and some reactivity features

The reaction of [Cp1IrCl₂]₂ (Cp* = η⁵ ? C₅Me₅) with the tridentate 3-thiapentane-1,5-dithiolate ligand, S(CH₂CH₂S^?)₂ (tpdt), led to the formation of [Cp1Ir(η³ ? tpdt)] (1) in 81% isolated yield. Subsequent reactions of 1 with [Cp1IrCl₂]₂ in 2:1 and 1:1 molar equiv ratios resulted in the formation of [Cp1Ir(μ ? η²:η³ ? tpdt)Cp1IrCl][PF₆] (2) and [Cp1Irμ ? η²:η³ ? tpdt)Cp1IrCl][Cp1IrCl₃] (3) in 86 and 79% yields, respectively, based on 1, whereas the reactions of 1 with [(COD)IrCl]₂ (COD = 1,5-cyclooctadiene) in 2:1 and 1:1 molar equiv ratios resulted in the formation of the homo-bimetallic derivatives Cp1Ir(μ ? η¹:η³ ? tpdt)(COD)IrCl (4) (92% yield) and [Cp1Ir(μ ? η²:η³ ? tpdt)(COD)Ir] [(COD)IrCl₂] (5) (82% yield). Reactions between 1 and [(COD)RhCl]₂, yielded the hetero-bimetallic derivatives Cp1Ir(μ ? η¹:η³ ? tpdt)(COD)RhCl (6) and [Cp1Ir(μ ? η²:η³ ? tpdt)(COD)Rh][(COD)RhCl₂] (7), in 92 and 93% yields, respectively. The reaction of 1 with methyl iodide gave mono-methylated derivative [Cp1Ir(η³-C₄H₈S₃Me)]I (8) (93% yield). All these compounds have been comprehensively characterized.     

New thioether–dithiolate complexes of Cp1Ir and some reactivity features

The reaction of [Cp1IrCl₂]₂ (Cp* = η⁵ − C₅Me₅) with the tridentate 3-thiapentane-1,5-dithiolate ligand, S(CH₂CH₂S⁻)₂ (tpdt), led to the formation of [Cp1Ir(η³ − tpdt)] (1) in 81% isolated yield. Subsequent reactions of 1 with [Cp1IrCl₂]₂ in 2:1 and 1:1 molar equiv ratios resulted in the formation of [Cp1Ir(μ − η²:η³ − tpdt)Cp1IrCl][PF₆] (2) and [Cp1Irμ − η²:η³ − tpdt)Cp1IrCl][Cp1IrCl₃] (3) in 86 and 79% yields, respectively, based on 1, whereas the reactions of 1 with [(COD)IrCl]₂ (COD = 1,5-cyclooctadiene) in 2:1 and 1:1 molar equiv ratios resulted in the formation of the homo-bimetallic derivatives Cp1Ir(μ − η¹:η³ − tpdt)(COD)IrCl (4) (92% yield) and [Cp1Ir(μ − η²:η³ − tpdt)(COD)Ir] [(COD)IrCl₂] (5) (82% yield). Reactions between 1 and [(COD)RhCl]₂, yielded the hetero-bimetallic derivatives Cp1Ir(μ − η¹:η³ − tpdt)(COD)RhCl (6) and [Cp1Ir(μ − η²:η³ − tpdt)(COD)Rh][(COD)RhCl₂] (7), in 92 and 93% yields, respectively. The reaction of 1 with methyl iodide gave mono-methylated derivative [Cp1Ir(η³-C₄H₈S₃Me)]I (8) (93% yield). All these compounds have been comprehensively characterized.     

Synthesis,structures and magnetic properties of two novel tetranuclear iron(III) single-molecule magnets: Enhanced energy barriers in solution

[Fe^III₄(acac)₆(Br-mp)₂] (1) and [Fe^III₄(acac)₆(tmp)₂] (2) were obtained from the reaction of Fe(acac)₂ with the appropriate tripodal alcohol. Both magnetic clusters show clear signatures for ferrimagnetic super exchange coupling. A fit of the DC susceptibility of 1 with the Kambe model gives J = ?8.2 ± 0.2 cm^?1, with g = 1.96 ± 0.02. Powder AC susceptibility data display significant frequency dependence for both compounds. The observation of an out-of-phase component demonstrates that these molecules may be single-molecule magnets (SMMs). AC susceptibility data for frozen solutions of 1 and 2 in toluene also show an out-of-phase signal proving these molecules are SMMs in solution. Going from powder to solution, the χ″ signals shift to higher temperatures which points towards an increase in energy barrier for the magnetization relaxation.     

New triosmium–iridium clusters: Synthesis and molecular structure of [Os3Ir2(Cp1)2(μ-OH)(μ-CO)2(CO)8Cl] (1), [Os3IrCp1(μ-OH)(CO)10Cl] (2), [Os3IrCp1(μ-H)(μ-Cl)(η3,μ3-C5H2N(NH2)Br)(CO)9] (3) and [Os3IrCp1(μ-Cl)2(η2,μ3-C5H3N(NH)Br)(CO)7] (4)

The trinuclear osmium carbonyl cluster, [Os₃(CO)₁₀(MeCN)₂], is allowed to react with 1 equiv. of [IrCp¹Cl₂]₂ (Cp¹ = pentamethylcyclopentadiene) in refluxing dichloromethane to give two new osmium–iridium mixed-metal clusters, [Os₃Ir₂(Cp¹)₂(μ-OH)(μ-CO)₂(CO)₈Cl] (1) and [Os₃IrCp¹(μ-OH)(CO)₁₀Cl] (2), in moderate yields. In the presence of a pyridyl ligand, [C₅H₃N(NH₂)Br], however, the products isolated are different. Two osmium–iridium clusters with different coordination modes of the pyridyl ligand are afforded, [Os₃IrCp¹(μ-H)(μ-Cl)(η³,μ₃-C₅H₂N(NH₂)Br)(CO)₉] (3) and [Os₃IrCp¹(μ-Cl)₂ (η²,μ₃-C₅H₃N(NH)Br)(CO)₇] (4). All of the new compounds are characterized by conventional spectroscopic methods, and their structures are determined by single-crystal X-ray diffraction analysis.     

Reactions of [ReX5(NO)]2− with triphenylstibine. Spectroscopic investigations of [ReX2(NO)(SbPh3)3], X-ray structures of [ReCl2(NO)(SbPh3)3] and [ReBr2Cl(SbPh3)3] and DFT calculations for [ReCl2(NO)(SbPh3)3]

The reactions of [NBu₄]₂[ReX₅(NO)] (X = Cl, Br) with triphenylstibine have been examined and three new rhenium complexes – [ReCl₂(NO)(SbPh₃)₃] (1), [ReBr₂(NO)(SbPh₃)₃] (2) and [ReBr₂Cl(SbPh₃)₃] (3) – have been obtained. The last one has been isolated in a low yield during slow recrystallization of the complex 2 from a mixture of chloroform and ethanol. The stibine rhenium nitrosyls have been characterized by IR and UV–vis spectroscopy. The X-ray structures of 1 and 3 have been determined. The geometric parameters of 1 have been examined using the density functional theory (DFT) method.     

Synthesis and properties of iron (II) quinoline-2-carboxylates,crystal structure of trans-diaquabis(quinoline-2-carboxylato)iron (II) bis(dichloromethane) solvate

Two mononuclear iron complexes with the quinoline-2-carboxylate ion (quin-2-c ion) have been obtained by the reaction of iron powder with quinoline-2-carboxylic acid in dichloromethane. The compounds [Fe(quin-2-c)₂] (1), [Fe(quin-2-c)₂(H₂O)₂] · 2CH₂Cl₂ (2) and [Fe(quin-2-c)₂(H₂O)₂] · 2EtOH · 2H₂O (3) have been investigated by IR and UV–Vis spectroscopy, magnetic susceptibility and field-dependent magnetization measurements. The structure of 2 has been characterised by X-ray diffraction. The 2D bilayered frameworks of 2 and 3 are constructed by extensive hydrogen bonding interactions between water and the organic ligand coordinated to iron (II). The magnetic properties of 2 and 3 were interpreted on the basis of a spin Hamiltonian that included axial and rhombic crystal field components. The weak antiferromagnetic (2) and ferromagnetic (3) interactions are evident in the low temperature data and possibly occur via strong hydrogen bonds.     

Synthesis,crystal structure and thermal behaviour of [La(hfa)3(Phen)2] (hfa = hexafluoroacetylacetonate,Phen = o-phenanthroline)

The mixed ligand complex [La(hfa)₃(Phen)₂] (I) was obtained by the interaction of La(hfa)₃ and Phen; its composition does not depend on the stoichiometry of the reagents. According to the X-ray single crystal analysis data, complex I crystallizes in the monoclinic space group P2₁/n, with a = 13.583(3) Å, b = 16.959(3) Å, c = 18.860(4) Å, β = 94.71(3)° and Z = 4. The structure of I consists of isolated mononuclear molecules, the coordination number of La being 10. Thermal behaviour and composition of the vapor phase have been studied for I by thermal analysis and mass-spectrometry using a Knudsen cell. The mixed ligand complex I was found to sublime congruently in the temperature range 370–460 K: [La(hfa)₃(Phen)₂]_(s) = [La(hfa)₃(Phen)]_(g) + Phen_(g), Δ_rH⁰(T) = 316.2 ± 1.8 kJ/mol.