Coinage metal complexes of tris(pyrazolyl)methanide [C(3,5-Me2pz)3]-: kappa3-coordination vs. backbone functionalisation

Tris(pyrazolyl)methanides, [C(3,5-R2pz)3]-, contain an unassociated tetrahedral carbanionic centre in the bridgehead position. In addition to nitrogen donor centres for transition metal coordination, an accessible reactive site for further manipulations is available in the backbone of the ligand. The coordination variability of the ambidental C-/N ligand [C(3,5-Me2pz)3]- was elucidated by investigating its coinage metal complexes. Two principle coordination modes were found for complexes of general formula [LMPR3] (with M = Cu(I), Ag(I), Au(I); L =[C(3,5-Me2pz)3]-; R = Ph, OMe). While for Cu(I) (2,3) and Ag(I) (4) complexes the anionic ligand acts as a face-capping, six electron N3-donor, gold(I) (5) is coordinated by the bridging carbanion yielding a two coordinate Au(I) complex comprising a covalent Au-C bond. The complexes featuring the kappa3-coordinated N3-donor ligand were investigated by 31P CP (MAS) NMR in the solid state.     

Copper(I) Nitro Complex with an Anionic [HB(3,5-Me(2)Pz)(3)](-) Ligand: A Synthetic Model for the Copper Nitrite Reductase Active Site

The new copper(I) nitro complex [(Ph(3)P)(2)N][Cu(HB(3,5-Me(2)Pz)(3))(NO(2))] (2), containing the anionic hydrotris(3,5-dimethylpyrazolyl)borate ligand, was synthesized, and its structural features were probed using X-ray crystallography. Complex 2 was found to cocrystallize with a water molecule, and X-ray crystallographic analysis showed that the resulting molecule had the structure [(Ph(3)P)(2)N][Cu(HB(3,5-Me(2)Pz)(3))(NO(2))]·H(2)O (3), containing a water hydrogen bonded to an oxygen of the nitrite moiety. This complex represents the first example in the solid state of an analogue of the nitrous acid intermediate (CuNO(2)H). A comparison of the nitrite reduction reactivity of the electron-rich ligand containing the CuNO(2) complex 2 with that of the known neutral ligand containing the CuNO(2) complex [Cu(HC(3,5-Me(2)Pz)(3))(NO(2))] (1) shows that reactivity is significantly influenced by the electron density around the copper and nitrite centers. The detailed mechanisms of nitrite reduction reactions of 1 and 2 with acetic acid were explored by using density functional theory calculations. Overall, the results of this effort show that synthetic models, based on neutral HC(3,5-Me(2)Pz)(3) and anionic [HB(3,5-Me(2)Pz)(3)](-) ligands, mimic the electronic influence of (His)(3) ligands in the environment of the type II copper center of copper nitrite reductases (Cu-NIRs).     

A Six-Coordinate Tris(3,5-dimethyl-1-pyrazolyl)methane-Thallium(I) Complex with a Stereochemically Inactive Lone Pair: Syntheses and Solid State Structures of {[HC(3,5-Me(2)pz)(3)](2)Tl}PF(6) and {[HC(3,5-Me(2)pz)(3)]Tl}PF(6) (pz = Pyrazolyl)

The addition of the tris(pyrazolyl)methane ligand HC(3,5-Me(2)pz)(3) (pz = pyrazolyl ring) to a THF solution of TlPF(6) results in the immediate precipitation of {[HC(3,5-Me(2)pz)(3)](2)Tl}PF(6). The structure has been determined crystallographically. The arrangement of the nitrogen donor atoms about the thallium is best described as a trigonally distorted octahedron. The thallium atom sits on a crystallographic center of inversion; thus the planes formed by the three nitrogen donor atoms of each ligand are parallel. The Tl-N bond distances range from 2.891(5) to 2.929(5) ? (average = 2.92) ?. The lone pair on thallium is clearly stereochemically inactive and does not appear to influence the structure. The pyrazolyl rings are planar, but are tilted with respect to the thallium atom so as to open up the N.N intraligand bite distances. The thallium(I) complex with a ligand to metal ratio of 1/1, {[HC(3,5-Me(2)pz)(3)]Tl}PF(6), is prepared in acetone by the reaction of equimolar amounts of HC(3,5-Me(2)pz)(3) and TlPF(6). The structure of the cation is a trigonal pyramid, with Tl-N bond distances that range from 2.64(1) to 2.70(1) ? (average = 2.67) ?. Pyrazolyl ring tilting is also observed in this complex, but the degree of tilting is smaller. Crystal data for {[HC(3,5-Me(2)pz)(3)](2)Tl}PF(6): monoclinic, P2(1)/c, a = 9.210(6) ?, b = 13.36(1) ?, c = 16.067(8) ?, beta = 92.48(5) degrees, V = 1975(2) ?(3), Z = 2, R = 0.029. For {[HC(3,5-Me(2)pz)(3)]Tl}PF(6): monoclinic, P2(1)/n, a = 10.685(2) ?, b = 16.200(5) ?, c = 13.028(3) ?, beta = 94.02(2) degrees, V = 2249.6(8) ?(3), Z = 4, R = 0.042.     

Solid-state structural and magnetic investigations of [M[HC(3,5-Me(2)pz)(3)](2)](BF(4))(2) (M = Fe,Co, Ni,Cu): observation of a thermally induced solid-state phase change controlling an iron(II) spin-state crossover

The reaction of M(BF(4))(2).xH(2)O (M = Co, Ni, and Cu) and HC(3,5-Me(2)pz)(3) in a 1:2 ratio yields [Co[HC(3,5-Me(2)pz)(3)](2)](BF(4))(2) (2), [Ni[HC(3,5-Me(2)pz)(3)](2)](BF(4))(2) (3), and [Cu[HC(3,5-Me(2)pz)(3)](2)](BF(4))(2) (4). Over the temperature range from 5 to 350, 345, or 320 K, Curie law behavior is observed for microcrystalline samples of all three compounds showing them to have three, two, and one unpaired electrons, respectively, with no spin-crossover observed for 2. Crystalline samples of these compounds torque in the applied magnetic field the first time the sample is cooled to 5 K. The solid-state structures of all three are isomorphous at 220 K, monoclinic in the space group C2/c. The metal is located on a unique crystallographic site and has a trigonally distorted octahedral structure, with 4 showing the expected Jahn-Teller distortions. Cooling crystals of all three to low temperatures leads to the observation of the same phase change to triclinic in the new space group P(-)1 with nonmerohedral twinning. This change is reversible and yields two crystallographically unique metal sites at low temperature. The bond angles and distances for the two different metal sites for each compound in the low temperature structures are very similar to each other and to those in the 220 K structures. The same phase change, monoclinic to triclinic, has been observed previously for [Fe[HC(3,5-Me(2)pz)(3)](2)](BF(4))(2) (1), except in this case, the phase change results in half of the cations changing over from the high-spin state to the low-spin state while the other half of the cations remain high-spin, with the low-spin form decreasing its Fe-N bond distances by 0.19 A. The new results with 2-4 show that it is the phase transition, which occurs in complexes of the type [M[HC(3,5-Me(2)pz)(3)](2)](BF(4))(2) with first row transition metals, that is driving the unusual spin-crossover behavior of [Fe[HC(3,5-Me(2)pz)(3)](2)](BF(4))(2).     

Synthesis and catalytic properties of molybdenum(VI) complexes with tris(3,5-dimethyl-1-pyrazolyl)methane

The complex [MoO(2)Cl{HC(3,5-Me(2)pz)(3)}]BF(4) (1) (HC(3,5-Me(2)pz)(3) = tris(3,5-dimethyl-1-pyrazolyl)methane) has been prepared and examined as a catalyst for epoxidation of olefins at 55 °C using tert-butyl hydroperoxide (TBHP) as the oxidant. For reaction of cis-cyclooctene, epoxycyclooctane is obtained quantitatively within 5 h when water is rigorously excluded from the reaction mixture. Increasing amounts of water in the reaction mixture lead to lower activities (without affecting product selectivity) and transformation of 1 into the trioxidomolybdenum(VI) complex [{HC(3,5-Me(2)pz)(3)}MoO(3)] (4). Complex 4 was isolated as a microcrystalline solid by refluxing a suspension of 1 in water. The powder X-ray diffraction pattern of 4 can be indexed in the orthorhombic Pnma system, with a = 16.7349(5) ?, b = 13.6380(4) ?, and c = 7.8513(3) ?. Treatment of 1 in dichloromethane with excess TBHP led to isolation of the symmetrical [Mo(2)O(4)(μ(2)-O){HC(3,5-Me(2)pz)(3)}(2)](BF(4))(2) (2) and unsymmetrical [Mo(2)O(3)(O(2))(2)(μ(2)-O)(H(2)O){HC(3,5-Me(2)pz)(3)}] (3) oxido-bridged dimers, which were characterized by single-crystal X-ray diffraction. Complex 2 displays the well-known (Mo(2)O(5))(2+) bridging structure where each dioxidomolybdenum(VI) center is coordinated to three N atoms of the organic ligand and one μ(2)-bridging O atom. The unusual complex 3 comprises dioxido and oxidodiperoxo molybdenum(VI) centers linked by a μ(2)-bridging O atom, with the former center being coordinated to the tridentate N-ligand. The dinuclear complexes exhibit a similar catalytic performance to that found for mononuclear 1. For complexes 1 and 2 use of the ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate and N-butyl-3-methylpyridinium tetrafluoroborate as solvents allowed the complexes to be completely dissolved, and in each case the catalyst and IL could be recycled and reused without loss of activity.     

Formation of a tetranuclear copper (II) cluster assembled by metal-assisted hydrolysis and desulfurization of bis(3,5-dimethylpyrazolyl)methylphosphine sulfide, MeP(S)(3,5-Me2Pz)2

The reaction of methylphosphine sulfide, MeP(S)(3,5-Me2Pz)2, 1, with anhydrous CuCl2 affords a tetranuclear copper cluster[Cu2Cl2(3,5-Me2Pz)3(MePO3)]2, 2, and a dinuclear compound Cu2Cl4(3,5-Me2Pz)4, 3. This reaction involves a metal-assisted desulfurization along with concomitant hydrolysis of P-N bonds. The X-ray structures of 1-3 have been determined, and the crystal parameters for these are the following. 1: space group = C2/c, a = 15.2552(1) A, b = 8.7364(2) A, c = 21.4490(3) A, beta = 93.349(1) degrees, V = 2853.74(8) A3, and Z = 8. 2: space group = P2(1)/n, a = 12.5964(4) A, b = 15.7773(4) A, c = 13.9781(4) A, beta = 116.6280(10) degrees, V = 2483.32(12) A3, and Z = 2. 3: space group = P2(1)/c, a = 8.7137(8) A, b = 13.5493(14) A, c = 11.8847(12) A, beta = 106.179(2) degrees, V = 1347.6(2) A3, and Z = 2. The structure of 2 shows that it comprises two dinuclear copper cores bridged together by two tripodal methylphosphinate, MePO3, ligands. 2 is weakly antiferromagnetically coupled, as revealed by variable temperature magnetic susceptibility measurements.     

1-(3,5-二甲基苯基)-1-[(1S,4S)-1,7,7-三甲基双环[2.2.1]庚烷-2-基]肼的合成工艺改进

以3,5-二甲基苯胺和2-莰酮为起始原料,在微波促进下,经缩合反应制得N-(3,5-二甲基苯基)-1-(1S,4S)-1,7,7-三甲基二环[2.2.1]庚烷-2-亚胺(1);1经硼氢化钠还原后再与羟胺-O-磺酸经胺化反应合成了1-(3,5-二甲基苯基)-1-[(1S,4S)-1,7,7-三甲基双环[2.2.1]庚烷-2-基]肼,总收率70.4%,其结构经1H NMR和ESI-MS确证。     

Molecular and crystal structure of 3,3-dimethyl-5-(2-naphthyl)-1-(4-nitrophenyl)-3,5a-dihydro-1H-azireno[1,2-c]imidazole

An X-ray study of 3,3-dimethyl-5-(2-naphthyl)-1-(4-nitrophenyl)-3,5a-dihydro-1H-azireno[1,2-c]imidazole revealed that the pyrazoline cycle has an envelope conformation. The endocyclic C=N double bond is slightly twisted. Quantum chemical calculations showed that this ring conformation is due to intramolecular interactions and is typical for substituted bicyclic aziridines.     

[4+2]-Cycloaddition of 3,6-bis(3,5-dimethyl-4-R-pyrazol-1-yl)-1,2,4,5-tetrazines with alkenes

A number of 1,4-dihydropyridazines and pyridazines were prepared by the Diels-Alder reaction with an inverse electron demand from cyclic heterodiene systems, 3,6-bis(3,5-dimethyl-4-R-pyrazol-1-yl)-1,2,4,5-tetrazines, and some enamines as well as from 4-vinylpyridine, butyl vinyl ether, phenylacetylene, and acrylamide. The reaction of 3,6-bis(3,5-dimethylpyrazol-1-yl)-1,2,4,5-tetrazine with styrene afforded 4,5-dihydropyridazine, which was readily oxidized by atmospheric oxygen to form the corresponding pyridazine. Electron-withdrawing substituents (Br or Cl) in the pyrazole rings accelerate [4+2]-cycloaddition. When heated, 1,4-dihydropyridazines, which were synthesized from tetrazines and enamines, eliminated amine to give pyridazines. The reactivities of tetrazines were evaluated by quantum-chemical methods. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 354–360, February, 2000.     

1,1-bis(3,5-dimethyl-1-pyrazolyl)- and 1-Amino-1-(3,5-dimethyl-1-pyrazolyl)-4,4-dichloro-1-buten-3-ones

Reaction of 1,1,4,4-tetrachloro-3-buten-2-one with 3,5-dimethylpyrazole gave 1,1-dichloro- 4,4-bis-(3,5-dimethyl-1-pyrazolyl)-3-buten-2-one. Treatment of the latter with amines resulted in replacement of one pyrazole ring by the amine residue with formation of the corresponding 4-amino-1,1-dichloro-4-(3,5- dimethyl-1-pyrazolyl)-3-buten-2-ones.Translated from Zhurnal Organicheskoi Khimii, Vol. 40, No. 10, 2004, pp. 1557–1560.Original Russian Text Copyright © 2004 by Potkin, Petkevich, Kaberdin, Kurman.     

Structural-electronic correlation in the first-order phase transition of [FeH2L2-Me](ClO4)2 (H2L2-Me = bis[((2-methylimidazol-4-yl)methylidene)-3- aminopropyl]ethylenediamine)

The synthesis and detailed study of the new mononuclear spin crossover complex [Fe(II)H2L(2-Me)](ClO4)2 (where H2L(2-Me) = bis[((2-methylimidazol-4-yl)methylidene)-3-aminopropyl]ethylenediamine) are reported. Variable-temperature magnetic susceptibility measurements show the occurrence of a steep spin crossover centered at 171.5 K with a hysteresis loop of ca. 5 K width (T(/2)(increasing) = 174 K and T(1/2)(decreasing) = 169 K, for increasing and decreasing temperatures, respectively). The crystal structure has been resolved for the high-spin (HS) and low-spin (LS) states at 200 and 123 K, respectively, revealing a crystallographic phase transition that occurs concomitantly to the spin crossover: at 200 K, the complex crystallizes in the monoclinic system, space group P2(1)/n, while the space group is P2(1) at 123 K. The mean Fe-N distances are shortened by 0.2 A, but the thermal spin crossover is accompanied by significant structural changes: the rearrangement of the central atom C12 of a six-membered chelate ring of [Fe(II)H2L(2-Me)]2+ to two positions (C12A and C12B) and, consequently, the lack of an inversion center at 123 K (P2(1) space group). Both HS and LS supramolecular structures involve all possible hydrogen bonds between imidazole and amine NH functions, and perchlorate anions; however, the HS supramolecular structure is a one-dimensional (1D) network, and the LS phase may better be described as a two-dimensional (2D) extended structure of A and B molecules. The structural phase transition of [FeH2L(2-Me)](ClO4)2 seems to trigger the steep and hysteretic spin crossover. Discontinuities in the temperature dependence of the M?ssbauer parameters (isomer shift and quadrupole splitting) at the spin crossover temperature confirmed the occurrence of a structural phase transition. The experimental enthalpy and entropy variations were determined by differential scanning calorimetry (DSC) as 7.5 +/- 0.4 kJ/mol and 45 +/- 3 J K(-1) mol(-1), respectively. The regular solution theory was applied to the experimental data, yielding an interaction parameter of Gamma = 3.36 kJ/mol, which is larger than 2RT(1/2), which fulfills the condition for observing hysteresis.     

Coordination properties of N2S (1,5-bis(3,5-dimethyl-1-pyrazolyl)-3-thiapentane) or N2S2 (1,8-bis(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane or 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene) donor ligands toward Rh(I)

The 1,5-bis(3,5-dimethyl-1-pyrazolyl)-3-thiapentane ligand (bdtp) reacts with [Rh(COD)(THF)₂][BF₄] to give [Rh(COD)(bdtp)][BF₄] ([1][BF₄]), which is fluxional in solution on the NMR time scale. Its further treatment with carbon monoxide leads to a displacement of the 1,5-cyclooctadiene ligand, generating a mixture of two complexes, namely, [Rh(CO)₂(bdtp)][BF₄] ([2][BF₄]) and [Rh(CO)(bdtp-κ³N,N,S)][BF₄] ([3][BF₄]). In solution, [2][BF₄] exists as a mixture of two isomers, [Rh(CO)₂(bdtp-κ²N,N)]⁺ ([2a]⁺) and [Rh(CO)₂(bdtp-κ³N,N,S)]⁺ ([2b]⁺; major isomer) rapidly interconverting on the NMR time scale. At room temperature, [2][BF₄] easily loses one molecule of carbon monoxide to give [3][BF₄]. The latter is prone to react with carbon monoxide to partially regenerate [2][BF₄]. The ligands 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene (bddf) and 1,8-bis(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane (bddo) are seen to react with two equivalents of [Rh(COD)(THF)₂][BF₄] to give the dinuclear complexes [Rh₂(bddf)(COD)₂][BF₄]₂ ([4][BF₄]₂) and [Rh₂(bddo)(COD)₂][BF₄]₂ ([5][BF₄]₂), respectively. In such complexes, the ligand acts as a double pincer holding two rhodium atoms through a chelation involving S and N donor atoms. Bubbling carbon monoxide into a solution of [4][BF₄]₂ results in loss of the COD ligand and carbonylation to give [Rh₂(bddf)(CO)₄][BF₄]₂ ([6][BF₄]₂). The single-crystal X-ray structures of [3][CF₃SO₃], [5][BF₄]₂ and [6][BF₄]₂ are reported.     

1-(2-Quinoxalyl)-, 1-[3,5-Di(trifluoromethyl)phenyl]-, 1-(2-Carboxyphenyl)-, and 1-Ethoxycarbonyl-4-oxo-4,5,6,7-tetrahydroindazoles

The corresponding 1-(2-quinoxalyl)-, 1-[3,5-di(trifluoromethyl)phenyl]-, and 1-ethoxycarbonyl-3-methyl-4-oxo-4,5,6,7-tetrahydroindazoles have been obtained from reactions of 2-acetyl-1,3-cyclohexanedione, its 5,5-dimethyl and 5-(2-furyl) derivatives, with 2-hydrazinoquinoxaline, 3,5-di(trifluoromethyl)phenylhydrazine, and ethoxycarbonylhydrazine. On interaction with ethoxycarbonylhydrazine the intermediate 2-[1-(-ethoxycarbonyl)hydrazino]ethylidene-1,3-cyclohexanediones were also isolated. From the potassium salt of 2-formyldimedone and 2-carboxyphenylhydrazine hydrochloride, 2-(2-carboxyphenyl)hydrazinomethylene-5,5-dimethyl-1,3-cyclohexanedione was obtained, the cyclization of which in ethanol in the presence of HCl led to 1-(2-carboxyphenyl)- and 1-(2-ethoxycarbonylphenyl)-6,6-dimethyl-4-oxo-4,5,6,7-tetrahydroindazole.     

Synthesis and Anti-HIV-1 Activity of 2-[2-(3,5-Dimethylphenoxy)ethylthio]pyrimidin-4(3H)-ones

New 2-[2-(3,5-dimethylphenoxy)ethyl]thio derivatives of pyrimidin-4(3H)-one containing various substituents at positions 5 and 6 of the pyrimidine ring were synthesized. It was shown that alkylation of 2-thiouracils with 1-bromo-2-(3,5-dimethylphenoxy)ethane in DMF takes place exclusively at the sulfur atom. The obtained 6-benzyl and 6-(2,6-difluorobenzyl) derivatives have clearly defined virus-inhibiting properties with respect to type 1 human immunodeficiency virus in vitro and suppress its reproduction by 50% at concentrations of 1.3 and 11.2 mM respectively.     

Synthesis of triamidoamine ligands of the type (ArylNHCH(2)CH(2))(3)N and molybdenum and tungsten complexes that contain an [ArylNCH(2)CH(2))(3)N]3- ligand

Aryl bromides react with (H(2)NCH(2)CH(2))(3)N in a reaction catalyzed by Pd(2)(dba)(3) in the presence of BINAP and NaO-t-Bu to give the arylated derivatives (ArylNHCH(2)CH(2))(3)N [Aryl = C(6)H(5) (1a), 4-FC(6)H(4) (1b), 4-t-BuC(6)H(4) (1c), 3,5-Me(2)C(6)H(3) (1d), 3,5-Ph(2)C(6)H(3) (1e), 3,5-(4-t-BuC(6)H(4))(2)C(6)H(3) (1f), 2-MeC(6)H(4) (1g), 2,4,6-Me(3)C(6)H(2) (1h)]. Reactions between (ArNHCH(2)CH(2))(3)N (Ar = C(6)H(5), 4-FC(6)H(4), 3,5-Me(2)C(6)H(3), and 3,5-Ph(2)C(6)H(3)) and Mo(NMe(2))(4) in toluene at 70 degrees C lead to [(ArNHCH(2)CH(2))(3)N]Mo(NMe(2)) complexes in yields ranging from 64 to 96%. Dimethylamido species (Ar = 4-FC(6)H(4), 3,5-Me(2)C(6)H(3)) could be converted into paramagnetic [(ArNHCH(2)CH(2))(3)N]MoCl species by treating them with 2,6-lutidinium chloride in tetrahydrofuran (THF). The "direct reaction" between 1a-f and MoCl(4)(THF)(2) in THF followed by 3 equiv of MeMgCl yielded [(ArNHCH(2)CH(2))(3)N]MoCl species (3a-f) in high yield. If 4 equiv of LiMe instead of MeMgCl are employed in the direct reaction, then [(ArNHCH(2)CH(2))(3)N]MoMe species are formed. Tungsten species, [(ArNHCH(2)CH(2))(3)N]WCl, could be prepared by analogous "direct" methods. Cyclic voltammetric studies reveal that MoCl complexes become more difficult to reduce as the electron donating ability of the [ArylNCH(2)CH(2))(3)N]3- ligand increases, and the reductions become less reversible, consistent with ready loss of chloride from ([(ArNHCH(2)CH(2))(3)N]MoCl)(-). Tungsten complexes are more difficult to reduce, and reductions are irreversible on the CV time scale.     

Synthesis,characterisation and structural aspects of some symmetrical organotellurium halides based on Bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride

Bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride (2) has been synthesised in good yield by reacting 1-(2-chloroethyl)-3,5-dimethylpyrazole with in situ prepared sodium telluride, Na₂Te in an aqueous solution. A number of new organotellurium halides from bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride have been synthesised by using different halogenating reagents. Reaction of 2 with bromine gave bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride dibromide (5a) in addition to unexpected product bis(2-(4-bromo-3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride dibromide (5b). All compounds were characterized by different spectroscopic techniques viz., ¹H, ¹³C, ¹²⁵Te NMR, Mass spectroscopy, IR and CHN analysis. EDXRF studies have also been employed to confirm the identity of 5a and 5b. Thermal gravimetric analysis of bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride (IV) chloride (4) and bis(2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl)telluride (IV) iodide (5c) reveals the thermal stability of these molecules above 100°C. The X-ray studies of 5c shows trigonal bipyramidal geometry around tellurium atom and intermolecular secondary interaction viz., C-H π stacking between H23A and C22 showing a supramolecular packing between two molecules.     

Synthesis and Molecular Structure of 3-[N-Acetyl(3,5-dimethylphenyl)amino]-5,7-di(tert-butyl)-2-{5,8-dimethyl-4-[(3,5-dimethylphenyl)amino]quinolin-2-yl}tropone

Russian Journal of General Chemistry - Acylation of 5,7-di(tert-butyl)-2-{5,8-dimethyl-4-[(3,5-dimethylphenyl)amino]quinolin-2-yl}-3-[(3,5-dimethylphenyl)amino]tropone leads to...     

Cleavage of NpzCH2 -OP and unexpected formation of bis(3,5-dimethyl-1H-pyrazol-1-yl)methane (dmbpm): X-ray crystal structure of [PdCl2(dmbpm)]

In the reaction of (3,5-dimethyl-1H-pyrazol-1-yl)methyldiphenylphosphinite (dmpmp) with [PdCl₂(CH₃CN)₂], we have obtained hydrolysis and phosphorus oxidation products and the unexpected complex cis-[PdCl₂(dmbpm)] (dmbpm = bis(3,5-dimethyl-1H-pyrazol-1-yl)methane). Modifications in the synthesis of dmpmp (high temperature, strong base, and the presence of Ph₂P(O)Cl) show that dmbpm is a by-product from the synthetic route to dmpmp. The complex cis-[PdCl₂(dmbpm)] is isolated and fully characterized by mass spectrometry, analytical, and spectroscopy techniques and the crystal structure is obtained by X-ray diffraction methods.     

Synthesis and Crystal Structure of 2-Hydroxybenzoic Acid [1-（3,5-Dibromo-2-hydroxyphenyl）methylidene]hydrazide Methanol

A new Schiff base compound, 2-hydroxybenzoic acid [1-(3,5-dibromo-2-hydroxy- phenyl) methylidene]hydrazide methanol (C14H10Br2N2O3·CH3OH), has been synthesized by the condensation of equimolar 3,5-dibromosalicylaldehyde and 2-hydroxybenzoic acid hydrazide in a methanol solution. The compound was characterized by elemental analysis, IR spectra, and single- crystal X-ray diffraction. The compound consists of a Schiff base moiety 2-hydroxybenzoic acid [1-(3,5-dibromo-2-hydroxyphenyl)methylidene]hydrazide and a lattice methanol molecule. The crystal belongs to the monoclinic system, space group P21/n with a = 7.183(1), b = 15.673(2), c = 15.001(2) , β = 98.345(2)o, Z = 4, V = 1670.9(4) 3, Dc = 1.773 g/cm3, Mr = 446.10, λ(MoKα) = 0.71073 , μ = 4.872 mm-1, F(000) = 880, R = 0.0458 and wR = 0.0963. A total of 3445 unique reflections were collected, of which 2236 with I > 2σ(I) were observed. As expected, the molecule adopts a trans configuration about the C=N double bond. The two benzene rings are nearly coplanar (mean deviation from the combined plane is 0.061(4) ), with the dihedral angle of 7.9(3)o. The preliminary biological tests show that the compound has moderate antibacterial activities.     

Monocarbaborane anion chemistry. An interesting encapsulation of the Pd2I2(P(C6H(4)-4-Me)3)4]2+ cation by a pair of [PhCB9H4I(C6H4Me)4]- anions

Reaction of the [1-Ph-closo-1-CB9H(4)-6,7,8,9,10-I5]- anion with 4-MeC6H4MgBr in the presence of [PdCl2(PPh3)2] gives the [Pd2I2(P(C6H(4)-4-Me)3)4]2+ salt of the [1-Ph-closo-1-CB9H(4)-10-I-6,7,8,9-(C6H(4)-4-Me)4]- anion, which exhibits an unusual neutral supramolecular assembly in the solid state, in which the dipalladium dication is encapsulated by two four-armed 'tetrapus' anionic units; the anion also has potentialities for four-fold dendrimer construction.