Design of surface properties of PET films: effect of fluorinated block copolymers

This paper demonstrates that the addition of fluorinated block copolymers to PET solutions can be used to prepare PET films with controlled surface morphology, porosity and chemical composition, by exploiting the phenomenon known as breath figures (BF) formation during a spin-coating procedure. Surface features, such as number, depth and diameter of pores and chemical composition, can be tuned by varying the experimental conditions: relative humidity, solution composition and amount of the fluorinated block copolymer added to the PET solutions (in the range of 0.5-10 wt% with respect to PET). BF patterns are more evident at relatively high concentrations of PET (3 wt%) and content of fluorinated block copolymer (10 wt% with respect to PET) in the solution. According to the obtained results, the fluorinated block copolymer seems to play a role in different steps of the mechanism of BF formation. XPS measurements showed a surface composition much richer in fluorinated segments than expected from bulk composition. The combined surface roughness and surface segregation of fluorinated segments have only a limited effect on the macroscopic wettability of the surfaces.     

Synthesis of new fluorinated Tebufenpyrad analogs with acaricidal activity through regioselective pyrazole formation

In previous studies, our group has shown that the use of fluorinated alcohols such as trifluoroethanol (TFE) and hexafluoroisopropanol (HFIP) as solvents dramatically increases the regioselectivity in the pyrazole formation from 1,3-diketone with methylhydrazine. We have now applied this synthetic method to the preparation of new fluorinated pyrazoles, which have then been used as synthetic intermediates in the preparation of fluorinated analogs of Tebufenpyrad, a commercial acaricide. These compounds display a strong acaricidal activity that is either comparable to or better than that of the commercial compound.     

Fabrication and superhydrophobic behavior of fluorinated microspheres

We describe the preparation of fluorinated microspheres by precipitation polymerization and their use to fabricate superhydrophobic surfaces. For that purpose, two different approaches have been employed. In the first approach, a fluorinated monomer (either 4-fluorostyrene or 2,3,4,5,6-pentafluorostyrene) was added to the initial mixture of monomers constituted by styrene (S) and divinylbenzene (DVB). The second approach is based on the encapsulation of a block copolymer, polystyrene-b-poly(2,3,4,5,6-pentafluorostyrene), during the polymerization of the monomers (S and DVB), thus enabling the formation of particles with perfluorinated chains instead of single functional groups at the interface. Both approaches led to narrow polydisperse particles with fluoro-functional groups at the interface as demonstrated by scanning electron microscopy (SEM), infrared (IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). Surface array of particles obtained by simple solvent casting presented superhydrophobic behavior with contact angles of water droplets of ca. 160-165°.     

Effect of soft segment length on properties of fluorinated polyurethanes

The effects of soft segment length on the variations in morphology, surface composition, and hydrophilicity have been studied in fluorinated polyurethanes (FPUs) and correlated with their preliminary blood compatibility as evidenced by in vitro platelet adhesion experiments. The fluorinated polyurethanes were obtained using hexamethylene diisocyanate (HDI) and chain extender of 2,2,3,3-tetrafluoro-1,4-butanediol (TF) as the hard segment as well as various soft segments—polytetramethyl oxides (PTMO) with molecular weights of 650, 1000, 1400, and 2000. The increased phase separation in hard-segment domains with lengthening soft segment was observed by FT-IR, which is believed to result in enhanced strength of hydrogen bonds and good hard-segment order arrangement. Thin-film XRD results indicate at least three lateral distances existing between adjacent hard segments in the crystallized hard segment. Their distribution depends strongly on the length of soft segment. Lengthening soft segment promotes the formation of dense arrangement of crystallized hard segments. Compared with the effect of phase separation, surface composition was found to exert a major influence on the preliminary blood compatibility of fluorinated polyurethanes. Increasing fluorine content by decreasing soft segment length promotes reduction in platelet adhesion and activation on polyurethane surfaces.     

Reactions of enamines with fluorinated acyl chlorides----Synthesis of fluorinated 1,3-diketones and 1,3-keto-aldehydes

The reactions of enamines (1a-b,4,6) with fluorinated acyl chlorides (2a-d) produced fluorinated 1,3-diketones (3a-f) and 1,3-keto-aldehydes (7a-c) in good yields as well as byproducts fluorinated acylamides (5a-c).It is proposed that the reactions involve nucleophilic attack by the C-atora and/or N-atom of the enamines on acyl carbon of the fluorinated acyl chlorides.     

Helix propensity of highly fluorinated amino acids

Highly fluorinated amino acids have been used to stabilize helical proteins for potential application in various protein-based biotechnologies. To gain further insight into the effect of these highly fluorinated amino acids on helix formation exclusively, we measured the helix propensity of three highly fluorinated amino acids: (S)-5,5,5,5',5',5'-hexafluoroleucine (Hfl), (S)-2-amino-4,4,4-trifluorobutyric acid (Atb), and (S)-pentafluorophenylalanine (Pff). We have developed a short chemoenzymatic synthesis of Hfl with extremely high enantioselectivity (>99%). To measure the helix propensity (w) of the amino acids, alanine-based peptides were synthesized, purified, and investigated by circular dichroism spectroscopy (CD). On the basis of the CD data, the helix propensity of hydrocarbon amino acids can decrease up to 24-fold (1.72 kcal.mol-1.residue-1) upon fluorination. This difference in helix propensity has previously been overlooked in estimating the magnitude of the fluoro-stabilization effect (which has been estimated to be 0.32-0.83 kcal.mol-1.residue-1 for Hfl), resulting in a gross underestimation. Therefore, the full potential of the fluoro-stabilization effect should provide even more stable proteins than the fluoro-stabilized proteins to date.     

Micellization of fluorinated amphiphiles

New cationic fluorinated surfactants and new types of fluorinated surfactants having fluorocarbon–hydrocarbon hybrids, dimeric and polymeric structure have been synthesized recently. Their synthesis requires many steps and consequently requires much time and high expense. Since the fluorinated surfactants have unusual molecular aggregation properties, ¹⁹F-NMR, novel fluorescence probes and cryo-transmission electron microscope techniques have been applied to study their aggregation behaviour in aqueous systems. Their unique characteristics are summarized as follows: (1) the dissolution process from solid state to dissolved aggregate state requires a very long time for the long chain fluorinated surfactants under thermodynamic equilibrium. The equilibration time can be reduced at higher temperatures; (2) interfacial properties and critical micelle concentration (CMC) are influenced by the nature of the hydrophobic terminal groups (CF₃− or HCF₂−); (3) the fluorocarbon functionality can make it possible even for single-chain amphiphiles to form vesicles or lamellar structures; (4) the hybrid surfactant made of both hydrocarbon and fluorocarbon chains showed a life time of 2.0×10⁻³ s for the exchange rate between the monomeric and the micellar states at the CMC and moreover, these detergents can cosolubilize fluorocarbon–hydrocarbon mixed solubilizates.     

Alpha-helix formation in melittin and beta-lactoglobulin A induced by fluorinated dialcohols

Extensive study of the effect of fluorinated alcohols on protein conformations, notably the induction of alpha-helix formation, is important because of its wide range of applications. Circular dichroism (CD) was used to show that the enhancement of helix induction in beta-lactoglobulin A and melittin by the fluorinated diols 2,2,3,3-tetrafluoro-1,4-butanediol (TFBD), 2,2,3,3,4,4-hexafluoro-1,6-pentanediol (HFPD), and 2,2,3,3,4,4,5,5-octafluoro-1,6-hexanediol (OFHD) increases in the order TFBD < HFPD < OFHD. For fluorinated diols and monoalcohols the effectiveness of helix induction was found to increase exponentially with increasing number of fluorine atoms per alcohol molecule, and OFHD was found to be more effective than any previously reported fluorinated alcohol. Formation of standard micelles was ruled out as the cause of the enhanced helix induction by the fluorinated diols. The negligible red-edge excitation shift in the fluorescence of melittin indicated that the fluorinated diol/water solvent shell surrounding the tryptophan chromophore is less immobilized than are molecules in a lamellar vesicle.     

Hydration and dewetting near fluorinated superhydrophobic plates

The water dynamics near nanoscale fluorinated (CF(3)(CF(2))(7)(CH(2))(2)SiH(3)) monolayers (plates) as well as possible dewetting transitions in-between two such plates have been studied with molecular dynamics simulations in this paper. A "weak water depletion" is found near the single fluorinated surface, with an average water density in the first solvation shells 6-8% lower than its hydrogenated counterpart. The fluorinated molecules are also found to be water impermeable, consistent with experimental findings. More surprisingly, a dewetting transition is found in the interplate region with a critical distance D(c) of 10 A (3-4 water diameters) for double plates with 8 x 8 molecules each (plate size approximately 4 nm x 4 nm). This transition, although occurring on a microscopic length scale, is reminiscent of a first-order phase transition from liquid to vapor. The unusual superhydrophobicity of fluorocarbons is found to be related to their larger size (or surface area) as compared to hydrocarbons, which "dilutes" their physical interactions with water. The water-plate interaction profile shows that the fluorinated carbons have a 10-12% weaker water-plate interaction than their hydrogenated counterparts in the nearest solvation shell, even though the fluorocarbons do have a stronger electrostatic interaction with water due to their larger partial charges. However, the van der Waals interactions dominate the water-plate interaction within the nearest shell, with up to 90% contributions to the total interaction energy, and fluorocarbons have a noticeably weaker (by 10-15%) van der Waals interaction with water in the nearest shell than do hydrocarbons. Both the slightly weaker water-plate interaction and larger surface area contribute to the stronger dewetting transition in the current fluorinated carbon plates.     

Helical self-assembly and co-assembly of fluorinated, preorganized discotics

The synthesis and self-assembly properties of a fluorinated C(3)-symmetrical 3,3'-bis(acylamino)-2,2'-bipyridine discotic (1) in the mesophase and in solution are described. First, 3,4,5-tris-(1H,1H,2H,2H,3H,3H-perfluoroundecyl-1-oxy)benzoyl chloride was coupled to mono-t-BOC protected 2,2'-bipyridine-3,3'-diamine to afford after deprotection the corresponding fluorinated aromatic amine on a multigram scale. Then, three-fold reaction of this amine with trimesyl chloride yielded the target C(3)-symmetrical fluorinated disc. The latter displayed columnar liquid crystallinity over a temperature range of more than 350 K in which helical rectangular and hexagonal columnar mesophases were detected by X-ray diffraction measurements. (1)H-NMR spectroscopy showed a preorganized structure due to strong intramolecular hydrogen bonding between the amide N-H's and bipyridine nitrogen atoms, even in the presence of a large excess of hexafluoroisopropanol. This preorganized structure allows the formation of helical self-assemblies in fluorinated solvents, as was established using UV-Vis spectroscopy. The fluorinated disc and two chiral hydrocarbon analogues (a C(3)-symmetrical and a desymmetrized disc) were mixed in a 1:10 v:v mixture of methoxynonafluorobutane (MNFB) and 1,1,2-trichloro-1,2,2-trifluoroethane (Freon 113). Importantly, the C(3)-symmetrical hydrocarbon disc dissolves only in the presence of fluorinated disc in the latter solvent mixture, proving a mutual interaction. CD spectroscopy performed on these mixtures points to a preference for alternating self-assemblies of fluorinated and chiral hydrocarbon discotics.     

Phase behavior of CO2-expanded fluorinated microemulsions

The formation of CO2-expanded, fluorinated reverse microemulsions is demonstrated for the system of perfluoropolyether (PFPE) surfactant (ClPFPE-NH4, MW = 632) and PFPE oil (PFPE, MW = 580). The phase behavior of this system is examined as a function of temperature (25-45 degrees C), pressure, CO2 concentration, and water to surfactant molar ratios (W0 = 10 and 20). Visual observations of one-phase behavior consistent with reverse microemulsion formation are further supported by spectroscopic measurements that establish the existence of a bulk water environment within the aqueous core. Microemulsion formation is not observed in the absence of CO2 for this PFPE surfactant/PFPE oil system, and a CO2 content greater than 70 mol % is required to induce microemulsion formation. Over the range of water loadings and temperatures investigated, the lowest cloud point pressure is observed at 46 bar (5 wt % ClPFPE-NH4 in PFPE oil, W0 = 20, xCO2 = 0.7, T = 25 degrees C). In the regions where one-phase behavior is observed, the cloud point pressures increase with temperature, water loadings, and CO2 content. The driving forces of microemulsion formation in the CO2-expanded fluorinated solvent are discussed relative to traditional reverse microemulsions and CO2-continuous microemulsions.     

Oil-induced anomalous thermoresponsive viscoelasticity in fluorinated surfactant systems

We have studied the rheology and structure of a mixed nonionic fluorinated surfactant, perfluoroalkyl sulfonamide ethoxylate, C(8)F(17)SO(2)N(C(3)H(7))(CH(2)CH(2)O)(n)H abbreviated as C(8)F(17)EO(10), and perfluorodecalin (C(10)F(18)) or perfluoropolyether oil, (C(3)F(6)O)(n)COOH, in an aqueous system using rheometry and small-angle X-ray scattering (SAXS) techniques. In the absence of oil, the viscosity of surfactant solutions (10 and 15 wt %) first decreases slightly and then more strongly with temperature. Addition of a small amount of fluorinated oil to the wormlike micellar solution disrupts the network structure and decreases the viscosity sharply at lower temperature indicating a rod-sphere transition. The trend of the viscosity curve changes gradually and an anomalous viscosity maximum as a function of temperature appears. It is found that perfluoropolyether oil decreases the viscosity more effectively than perfluorodecalin. The generalized indirect Fourier transformation (GIFT) analysis of the SAXS data confirmed the formation of long rod-like particles in an oil-free, surfactant/water system at 20 degrees C. Addition of a trace amount of fluorinated oils induces modulation in the structure of the micelles and eventually short rods or spherical particles are formed. The decreasing trend in the viscosity with oil concentration is thus attributed to the microstructure changes induced by the added oils.     

Synthesis and characterization of novel fluorinated poly(oxomolybdates)

Two novel poly(oxofluoromolybdate) clusters, [Mo6O18F6]6- and [Mo7O22F3]5-, have emerged from systematic field studies on the hydrothermal fluorination of poly(oxometalates). They are accessible via the hydrothermal treatment of Mo(VI)-based precursors in the presence of MF additives (M = Li, Na, Cs, NMe4). The new fluorinated polyanions are stabilized by specific alkali-cation combinations, and their packing motifs can be tuned through the careful choice of cations and synthetic parameters. The [Mo6O18F6]6- anion can be described as a cored and fluorinated form of the Anderson-Evans cluster type. It is stabilized by the interaction of two alkali cations with the fluorinated faces of the ring-shaped anion. The partial replacement of these capping alkali cations by the bulky, organic NMe4(+) cation leads to the formation of [Mo7O22F3](5-)-based compounds. Thus, the extent of fluorination can be controlled through the polarizability of the cationic environment: in the [Mo7O22F3]5- anion, half of the fluoride atoms of the [Mo6O18F6]6- anion are replaced by a capping MoO4 tetrahedron, thereby rendering this anion a fluorinated, lacunar derivative of the alpha-[Mo8O26]4- octamolybdate anion. All compounds have been structurally characterized by single-crystal X-ray diffraction and solid-state NMR spectroscopy. The templating role of the alkali cations is discussed and explained with the help of electrostatic calculations.     

含氟膦、胂叶立德的质谱研究

本文报道37个含氟膦.胂羰基的叶立德衍生物的电子轰击(EI)和8个含氟胂羟基叶立德的甲烷化学电离(Cl)正.负离子质谱. 研究其断裂规律,氧和氟原子重排以及不同取代基对一些特征离子强度的影响.     

Phase behavior and preparation of mesoporous silica in aqueous mixtures of fluorinated surfactant and hydrophobic fluorinated polymer

The phase behavior and formation of self-assemblies in the ternary water/fluorinated surfactant (C(8)F(17)EO(10))/hydrophobic fluorinated polymer (C(3)F(6)O)(n)COOH system and the application of those assemblies in the preparation of mesostructured silica have been investigated by means of phase study, small angle X-ray scattering, and rheology. Hexagonal (H(1)), bicontinuous cubic (V(1)) with Ia3d symmetry, and polymer rich lamellar (L(alpha)(')) are observed in the ternary diagram. C(8)F(17)EO(10) molecules are dissolved in polymer rich aggregates, whereas (C(3)F(6)O)(n)COOH molecules are practically insoluble in the surfactant lamellar phase due to packing restrictions. Hence, two types of lamellar phases exist: one with surfactant rich (L(alpha)) and the other with polymer rich (L(alpha)(')) in the water/C(8)F(17)EO(10)/(C(3)F(6)O)(n)COOH system. As suggested by rheological measurements, worm-like micelles are present in C(8)F(17)EO(10) aqueous solutions but a rod-sphere transition takes place by solubilization of (C(3)F(6)O)(n)COOH. C(8)F(17)EO(10) acts as a structure directing agent for the preparation of hexagonal mesoporous silica by the precipitation method. The addition of (C(3)F(6)O)(n)COOH induces the formation of larger but disordered pores.     

Isolating fluorinated carbocations

Using carboranes as counterions, fluorinated benzyl-type carbocations such as (p-FC(6)H(4))(2)CF(+), (p-FC(6)H(4))(CH(3))CF(+) and fluorinated trityl ions are readily isolated for X-ray and IR structural characterization.     

Synthesis and characterization of fluorinated polyurethane with fluorine-containing pendent groups

A novel fluorinated polyurethane （FPU） with fluorine-containing pendent groups was prepared by using fluorinated polyether glycol （PTMG-g-HFP） as a soft segment, 1,6-hexamethylene diisocyanate （HDI） or toluene diisocyanate （TD1） as a hard segment and 1,4-butanodiol （BDO） as a chain extender. FTIR, ^1H NMR, ^13C NMR and GPC were used to characterize the structure of the fluorinated polyurethane. Thermal stabilities of the fluorinated polyurethane and the corresponding hydrogenated polyurethane were studied by TGA. XPS analysis at two different sampling depths for the fluorinated polyurethane was used to investigate the surface compositions of FPU. The results showed the fluorine enrichment on the surface of FPU.     

Enantioselective Pd-catalyzed hydrogenation of fluorinated imines: facile access to chiral fluorinated amines

An enantioselective hydrogenation of simple fluorinated imines has been developed using Pd(OCOCF(3))(2)/(R)-Cl-MeO-BIPHEP as a catalyst, and up to 94% ee was achieved. This method provides an efficient route to enantioenriched fluorinated amines.     

Langmuir-Blodgett films of fluorinated glycolipids and polymerizable lipids and their phase separating behavior

This paper describes the phase separating behavior of Langmuir monolayers from mixtures of different lipids that (i) either carry already a glycopeptide recognition site or can be easily modified to carry one and (ii) polymerizable lipids. To ensure demixing during compression, we used fluorinated lipids for the biological headgroups and hydrocarbon based lipids as polymerizable lipids. As a representative for a lipid monomer, which can be polymerized in the hydrophilic headgroup, a methacrylic monomer was used. As a monomer, which can be polymerized in the hydrophobic tail, a lipid with a diacetylene unit was used (pentacosadiynoic acid, PDA). The fluorinated lipids were on the one hand a perfluorinated lipid with three chains and on the other hand a partially fluorinated lipid with a T(N)-antigen headgroup. The macroscopic phase separation was observed by Brewster angle microscopy, whereas the phase separation on the nanoscale level was observed by atomic force microscopy. It turned out that all lipid mixtures showed (at least) a partial miscibility of the hydrocarbon compounds in the fluorinated compounds. This is positive for pattern formation, as it allows the formation of small demixed 2D patterned structures during crystallization from the homogeneous phase. For miscibility especially a liquid analogue phase proved to be advantageous. As lipid 3 with three fluorinated lipid chains (very stable monolayer) is miscible with the polymerizable lipids 1 and 2, it was mostly used for further investigations. For all three lipid mixtures, a phase separation on both the micrometer and the nanometer level was observed. The size of the crystalline domains could be controlled not only by varying the surface pressure but also by varying the molar composition of the mixtures. Furthermore, we showed that the binary mixture can be stabilized via UV polymerization. After polymerization and subsequent expansion of the barriers, the locked-in polymerized structures are stable even at low surface pressures (10 mN/m), where the unpolymerized mixture did not show any segregation.     

Synthesis of fluorinated indazoles through ANRORC-like rearrangement of 1,2,4-oxadiazoles with hydrazine

A series of 6-substituted fluorinated indazoles has been obtained through an ANRORC-like rearrangement (Addition of Nucleophile, Ring-Opening and Ring-Closure) of 5-tetrafluorophenyl-1,2,4-oxadiazoles with hydrazine. The initial addition of the bidentate nucleophile to the electrophilic C(5) of the 1,2,4-oxadiazole ring, followed by ring opening and ring closure, leads to the formation of fluorinated indazoles in high yield under mild experimental conditions. Functionalization of the C(6) in the final indazole nucleus was preliminarily achieved through a nucleophilic aromatic substitution on the starting 5-pentafluorophenyl-1,2,4-oxadiazole.