沉淀聚合法制备三聚氰胺分子印迹聚合物微球

以三聚氰胺为模板分子,以甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在乙腈-乙二醇(20∶1,V/V)混合溶剂中沉淀聚合制备了分子印迹聚合物微球.利用1H-NMR和紫外光谱方法研究了模板与功能单体相互作用情况.结果表明,三聚氰胺与甲基丙烯酸(MAA)分子通过协同氢键作用形成1∶2型氢键配合物.利用扫描电镜和红外光谱对聚合物微球的结构进行了表征.结果表明,印迹聚合物近似圆球形,粒径约为400～500 nm,且大于非印迹聚合物微球,表面存在大量的结合位点.通过静态平衡吸附实验研究了聚合物微球对模板分子的结合能力,印迹聚合物微球在4 h后逐渐达到吸附平衡,Scatchard分析表明,印迹聚合物微球主要存在两类不同的结合位点,最大表观结合量(Qmax)和平衡离解常数(Kd)分别为Qmax1=22.97μmol/g,Kd1=0.14×10-3 mol/L;Qmax2=157.65μmol/g,Kd2=2.55×10-3 mol/L,计算得出表观印迹效率和有效印迹效率分别为68%和58%.此方法合成的印迹聚合物微球对三聚氰胺有较好的结合性能,可应用于三聚氰胺的分离检测.     

沉淀聚合法制备右旋邻氯扁桃酸分子印迹聚合物微球

以右旋邻氯扁桃酸为模板,丙烯酰胺、乙二醇二甲基丙烯酸酯分别为功能单体和交联剂,采用沉淀聚合法制备了分子印迹聚合物微球,讨论了反应介质用量、聚合温度、引发剂的种类和用量对印迹微球的影响。实验表明：分子印迹微球与传统本体聚合法制备的聚合物相比具有更高的特异识别能力,通过Scatchard分析研究了聚合物的选择结合性能,结果表明分子印迹聚合物微球在识别右旋邻氯扁桃酸分子的过程中存枉两类结合位点,而空白聚合物微球只存在一类结合位点。     

TNT分子印迹聚合物微球的合成与性能研究

以三硝基甲苯(TNT)为模板分子,EDMA为交联剂,采用沉淀聚合法制备了TNT分子印迹微球.讨论了溶剂用量、模板分子用量、功能单体种类等对分子印迹微球的形貌及吸附性能的影响;利用紫外吸收光谱和BET表征了印迹聚合物微球的结合位点相互作用与印迹孔穴结构;通过平衡吸附和选择性吸附实验,研究了印迹聚合物微球的吸附性能和选择性识别性能.结果表明,以丙烯酰胺为功能单体制备的分子印迹聚合物为规则的球形,内部含有分子印迹孔穴,微球的粒径为1～2μm.印迹聚合物微球可在30 min内达到吸附平衡,在1 mmol/L的TNT乙醇溶液中,印迹聚合物微球的平衡吸附量为32.5 mmol/kg,对TNT分离系数为25.19,具有较好的特异性吸附能力,并可选择性识别TNT分子.     

炔雌醇类似物分子印迹聚合物的制备及性能研究

采用沉淀聚合法合成了以炔雌醇类似物17-乙基雌二醇为名义模板分子,甲基丙烯酸为功能单体,三羟甲基丙烷三甲基丙烯酸酯为交联剂的分子印迹聚合物微球。采用Gaussian 03计算机软件模拟了名义模板与功能单体的相互作用,优选功能单体及配比。利用透射电子显微镜观察了聚合物微球的形貌,通过静态平衡吸附试验研究了此聚合物对自身模板、炔雌醇及雌二醇的结合能力和选择性。结果表明印迹聚合物微球大小比较均匀,外形圆整,对炔雌醇及其类似物均表现出了较高的亲和性和特异性识别能力。     

鹅去氧胆酸分子印迹聚合物微球的制备及选择性分子识别

以鹅去氧胆酸(CDCA)为印迹分子, 甲基丙烯酸为功能单体, 丙烯酸乙二醇二甲基酯和三羟甲基丙烷三甲基丙烯酸酯为交联剂, 在氯仿中采用沉淀聚合法制得平均粒径为200~300 nm的分子印迹聚合物微球(MIPMS). 用红外光谱研究了印迹分子与功能单体之间的作用类型, 用透射电镜对聚合物的形貌进行了表征. 结果表明, 聚合物微球在合成过程中形成了两类结合位点, 该分子印迹聚合物对CDCA具有良好的特异吸附性能, 可用于胆汁酸的分离、纯化, 交联剂的种类可以影响分子印迹聚合物的形貌和吸附性能.     

沉淀聚合法制备水杨酸分子印迹微球及其性能研究

以水杨酸(SA)为模板分子,丙烯酰胺(AM)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,利用沉淀聚合法制备了对水杨酸具有较高选择性与较高亲和性的分子印迹聚合物微球(MIPs)。用傅里叶红外光谱和环境扫描电镜表征印迹聚合物微球的结构和形貌,采用静态吸附法考察了水杨酸分子印迹聚合物微球的吸附性能。结果表明,当SA:AM:EDMA摩尔比为1:4:20时,得到的分子印迹聚合物微球粒径均一,球形度较好,对水杨酸具有较好的选择吸附性,最大表观结合量可达到52.42mg/g。     

苏丹红Ⅰ分子印迹聚合物分子识别特性的波谱分析

以苏丹红Ⅰ为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,通过沉淀聚合法合成了高选择性的分子印迹聚合物。通过静态吸附实验研究了聚合物的吸附性能,采用紫外光谱(UV)和核磁共振氢谱(1 H NMR)法研究了聚合物的识别机理。实验结果表明:模板分子和功能单体之间的作用为分子间氢键;红外(IR)光谱研究进一步表明,印迹聚合物通过非共价氢键作用特异性地识别模板分子。     

基于金属卟啉的甲基磷酸二甲酯分子印迹聚合物微球的合成及性能

合成了分别以5-(4-甲基丙烯酰氧苯基)-10,15,20-三苯基锌卟啉(ZnMOTPP)和5-(4-甲基丙烯酰氧苯基)-10,15,20-三苯基钆卟啉(GdMOTPP)为功能单体, 甲基丙烯酸(MAA)为辅助功能单体的甲基磷酸二甲酯(DMMP)分子印迹聚合物微球. 扫描电子显微镜(SEM)表征结果表明, 微球平均粒径为50～100 μm, 粒度均匀. 与甲基丙烯酸作为功能单体的分子印迹聚合物微球的吸附性能和特异性进行对比发现, ZnMOTPP分子印迹微球的吸附性能优于 GdMOTPP分子印迹微球, 金属卟啉分子印迹微球的吸附性能优于仅以甲基丙烯酸作为功能单体的分子印迹微球, 并且微球对其印迹分子DMMP具有特异性吸附. Scatchard分析表明, DMMP分子印迹空穴中只存在一类结合位点, MIPMs-Zn+MAA的最大吸附量Q_max=148 μmol/g, MIPMs-Gd+MAA的Q_max=78.9 μmol/g, MIPMs-MAA的Q_max=13.57 μmol/g.     

乳液聚合法制备亚微米级分子印迹聚合物微球

以西咪替丁为印迹分子，2-丙烯酰胺-2-甲基丙磺酸(AMPS)为功能单体，三羟甲基丙烷三甲基丙烯酸甲酯(TRIM)为交联剂，采用乳液聚合法制备了亚微米级分子印迹聚合物微球．利用扫描电镜对此聚合物微球的形貌进行了观察，探讨了影响乳液稳定性、粒径大小与分布的主要因素，重点对聚合工艺和配方进行了优化，并将所得的聚合物用作吸附剂研究了其分子识别与选择性能．研究表明，乳液聚合法能够制得单分散性较好的、平均粒径在0．169μm～0．407μm的分子印迹聚合物微球，且该微球对其印迹分子呈现出较好的特异识别与选择性能，当以苯丙氨酸为竞争分子时，分离因子可达1．70．     

大黄酸分子印迹聚合物微球的制备及特性

以聚苯乙烯微球为种球,大黄酸为模板分子,采用单步溶胀聚合法在N,N-二甲基甲酰胺体系中制备了单分散分子印迹聚合物微球.用扫描电镜对微球的结构和形貌进行了表征,并研究了微球的制备条件和吸附特性.微球的凹槽可有效地增加微球的比表面积和结合位点,从而提高了模板分子的结合速率及微球的印迹容量.     

左氧氟沙星印迹聚合物微球及其特异吸附研究

以甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用沉淀聚合法制备了左氧氟沙星印迹聚合物(MIP)微球,用SEM和IR分别对微球形貌和结构进行表征,用静态吸附法和Scatchard分析考察了聚合物微球对模板及其结构类似物的吸附行为和选择性识别能力.结果表明,MIP对模板分子的吸附平衡速度快,40min即可达到吸附...     

An amobarbital molecularly imprinted microsphere for selective solid-phase extraction of phenobarbital from human urine and medicines and their determination by high-performance liquid chromatography

A 40-60 microm amobarbital molecularly imprinted microsphere, used as a solid-phase selective sorbent for extracting phenobarbital from human urine and medicines, was prepared by a suspension polymerization method. A series of binding studies was performed in order to find optimal loading, washing and eluting conditions for solid-phase extraction. Under optimal conditions, good recoveries of phenobarbital in samples were obtained. Normally, molecularly imprinted polymers, prepared in bulk, require laborious work. Significant losses occur during the procedure of grinding and washing. In this work all molecularly imprinted polymers made into microsphere could be utilized, and the cost of the template was reduced too (the price of phenobarbital is twice that of amobarbital). As the phenobarbital to be extracted was different from the template molecule amobarbital, the interference caused by template leaking could be avoided in the assay.     

Analytical followup of the gamma initiated synthesis of a molecularly imprinted polymer

A molecularly imprinted polymer (MIP) for the template phenytoin has been prepared by gamma initiated copolymerization of methacrylamide and ethylene glycol dimethacrylate. The progress of polymerization was studied by measuring the monomer conversions and the template binding properties of the resulting polymers, respectively. The consumption rate of the two monomers showed different course. There was no difference observed in the polymerization rates of the MIP and the control polymer (NIP). The template binding properties of the MIP and the NIP changed considerably with the progress of the polymerization process and became similar to those of the thermally initiated polymers after full conversion.     

苯甲酸分子印迹聚合物的制备及其吸附性能

以苯甲酸为模板分子,4-乙烯基吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用本体聚合法制备了高选择性识别的分子印迹聚合物。利用合成的聚合物作为吸附剂填充制备气体浓缩针装置,并用于挥发性有机化合物(VOCs)的气相色谱分析。实验结果表明:60℃下恒温聚合反应6h,模板分子、功能单体、交联剂的物质量比为1∶4∶20,预聚合时间为3h,溶剂为乙腈,模板分子为苯甲酸时,合成的分子印迹聚合物对苯系物的吸附量最大。     

Carprofen-imprinted monolith prepared by reversible addition–fragmentation chain transfer polymerization in room temperature ionic liquids

To obtain fast separation, ionic liquids were used as porogens first in combination with reversible addition–fragmentation chain transfer (RAFT) polymerization to prepare a new type of molecularly imprinted polymer (MIP) monolith. The imprinted monolithic column was synthesized using a mixture of carprofen (template), 4-vinylpyridine, ethylene glycol dimethacrylate, [BMIM]BF₄, and chain transfer agent (CTA). Some polymerization factors, such as template-monomer molar ratio, the degree of crosslinking, the composition of the porogen, and the content of CTA, on the column efficiency and imprinting effect of the resulting MIP monolith were systematically investigated. Affinity screening of structurally similar compounds with the template can be achieved in 200 s on the MIP monolith due to high column efficiency (up to 12,070 plates/m) and good column permeability. Recognition mechanism of the imprinted monolith was also investigated.     

葡萄球菌肠毒素B分子印迹聚合物的制备及其与蛋白质的结合性能

以葡萄球菌肠毒素B(SEB)蛋白为模板分子,以聚苯乙烯微球为基质,采用表面分子印迹法制备了SEB分子印迹聚合物.利用平衡吸附试验分析了SEB聚合物对目标蛋白的吸附能力及对类似底物的选择性;分析了该聚合物的吸附动力学,并利用扫描电镜观察了其形貌特征和颗粒尺寸.结果表明,经Scatchard模型分析求得的标题聚合物的最大表观结合量Qmax为3.23mg/g;所制备的SEB分子印迹聚合物呈微球形,粒径约为1²μm,对SEB蛋白具有较好的吸附性和特异选择性.     

Preparation and Characterization of Prometryn Molecularly Imprinted Solid‐Phase Microextraction Fibers

Abstract

A novel reproducible solid‐phase microextraction (SPME) coating was prepared on the surface of silanized silica fibers by molecularly imprinted polymerization using prometryn as template molecule. The structure and extraction performance of molecularly imprinted polymer (MIP) coating was studied with the scanning electron microscope and high performance liquid chromatography (HPLC). Specific selectivity was found with the prometryn MIP‐coated fiber to prometry and its structural analogues such as atrazine, simetryn, terbutylazin, ametryn, propazine and terbutryn. In contrast, these triazines could not be selectively extracted by the non‐imprinted polymer fiber or commercial polydimethylsiloxane (PDMS), polydimethylsiloxane/divinylbenzene (PDMS/DVB), polyacrylate (PA) fibers.     

Selective Solid‐phase Extraction of Bisphenol A Using a Novel Stir Bar Based on Molecularly Imprinted Monolithic Material

In this paper, a novel monolithic stir bar based on molecularly imprinted polymer (MIP) was firstly developed by filling modified neodymium magnet (Nd₂Fe₁₄B) powders into a glass tube (60 × 4 mm), followed by the imprinted grafting with bisphenol A (BPA) as the template molecule by thermal polymerization. It has been successfully used for the stir bar sorptive extraction (SBSE) and its extraction performance illustrated that the MIP‐encapsulated stir bar had stronger affinity to the template molecule, compared with the stir bar based on the non‐imprinted molecularly polymer (NIP). Under the optimal extraction conditions, a simple method based on the coupling of MIP‐SBSE with high performance liquid chromatography (HPLC) was used for the selective determination of the model mixtures of BPA, 4‐phenylphenol (PP) and phenol (P) in bottled water. The recoveries of BPA, PP and P were in the range of 88.5‐96.1%, 78.2‐89.7%, 81.3‐89.5% at three spiked levels, respectively, demonstrating that higher extraction and the specific absorption occurred between the template molecule and the prepared MIP stir bar.     

Synthesis and characterization of a novel quercetin magnetic molecularly imprinted polymer via reversible addition fragmentation chain transfer strategy

Molecularly imprinted polymer (MIP) will be modified on the surface of the core-shell structure silica magnetic nanoparticles, during which quercetin is used as a template molecule, acrylamide as a functional monomer, azo-bisisobutyronitrile as an initiator and ethylene glycol dimethacrylate as a cross-linker, to synthesize highly efficient and selective quercetin magnetic molecularly imprinted nanoparticles via Reversible Addition-Fragmentation chain Transfer (RAFT) polymerization. FT-IR and X-ray diffraction (XRD) patterns are used to monitor the reaction and show the characteristic groups of each reaction step. Compared with the conventional bulk polymerization (2.7029 mg/g), the adsorption test showed that the MMIP by RAFT activity controlled polymerization had better absorption capacity for quercetin which the saturated adsorption amount was 4.8471 mg/g. Kinetic studies indicate that pseudo first order model is suitable to describe the adsorption mechanism. Thermodynamics experiment revealed that Langmuir model was more applied for explains the adsorption of quercetin onto magnetic molecularly imprinted polymer.     

一种新型分子印迹聚合物基的化学发光阵列传感器

建立了一种分子印迹-化学发光阵列传感器测定甘氨酸的新方法. 该方法以甘氨酸为模板分子, 合成了分子印迹聚合物微球, 将该聚合物微球固定在96孔板上, 用它来识别丹磺酰氯标记的甘氨酸(Dns-Gly). 最后加入化学发光试剂(TCPO-H2O2-咪唑), 测量相对化学发光强度定量检测甘氨酸. 在最佳试验条件下, 相对化学发光强度和甘氨酸的浓度在0.2～60 μmol/L范围内成良好的线性关系, 相关系数为r＝0.9972, 方法的检出限为0.07 μmol/L, 对1 μmol/L甘氨酸溶液进行11次平行测定, 相对标准偏差为3.3% (n＝11). 由于以甘氨酸为模板分子合成出来的分子印迹聚合物空腔比较小, 避免了非特异性吸附, 使它在识别丹磺酰氯标记的甘氨酸时特异性、响应速度和灵敏度都有所增强.