首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Poly(propylene isophthalate) (PPI), poly(propylene succinate) (PPS), and poly(propylene isophthalate/succinate) (PPI‐PPS) random copolymers were synthesized and characterized in terms of chemical structure and molecular weight. The thermal behavior was examined by TGA and DSC. All the polymers showed a good thermal stability. At room temperature, they appeared as semicrystalline materials, except 20PPI‐PPS and 30PPI‐PPS: the main effect of copolymerization was a lowering in the amount of crystallinity and a decrease of Tm with respect to homopolymers. A crystalline phase of PPI and PPS was evidenced at high content of PI or PS units, respectively. Amorphous samples were obtained after melt quenching and an increment of Tg, with the increment of PI units, was observed. This behavior was explained as due to the presence of stiff phenylene groups. The Wood equation described well Tg‐composition data. Lastly, the presence of a rigid‐amorphous phase was evidenced in copolymers, differently from the two homopolymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 310–321, 2007.  相似文献   

2.
The miscibility of poly(propylene succinate)/poly(propylene adipate) blends was investigated by means of DSC, WAXS and NMR techniques. Poly(propylene succinate) and poly(propylene adipate) were found to be completely immiscible in as blended-state. The miscibility changes upon extended mixing at elevated temperature: for enough long mixing time, the original two phases gradually merged into a single one because of transesterification reactions. The NMR analysis showed that the transesterifications led to block copolymers whose average sequence length decreased as the mixing time is increased at a fixed temperature. Upon very long mixing time (150 min), all PPS and PPA chains are fully transformed into a random copolymer characterized by a single amorphous phase.  相似文献   

3.
Poly(butylene oxalate) (PBO) and poly(butylene oxalate/butylene azelate) random copolymers (PBOBAz) of various compositions were synthesized in bulk and characterized in terms of chemical structure and thermal properties. The thermal behavior was examined by thermogravimetric analysis and differential scanning calorimetry. All copolymers were found to be partially crystalline and thermally stable up to about 290 °C. The main effect of copolymerization was a decrease in melting and glass transition temperatures with respect to PBO homopolymer. The pure crystalline phase characteristic of PBO was evidenced by means of X-ray measurements in all the copolymers under investigation. The fusion temperatures appeared to be well correlated to composition by Baur's equation.Amorphous samples were obtained after melt quenching and showed a monotonic decrease of glass transition temperatures as the content of the flexible butylene azelate units is increased. Fox equation described well the Tg-composition data. Lastly, the overall crystallization rate of PBO was found to decrease regularly with increasing butylene azelate unit content.  相似文献   

4.
Poly(propylene/neopenthyl terephthalate) random copolymers (PPT‐PNT) and poly(neopenthyl terephthalate) (PNT) were synthesized and subjected to molecular characterization. Afterwards, the polyesters were examined by TGA, DSC, andX‐ray. The copolymers, which displayed a good thermal stability, at room temperature appeared as semicrystalline materials: the main effect of copolymerization was a lowering in the amount of crystallinity and a decrease of the melting temperature with respect to homopolymer PPT. XRD measurements allowed the identification of the PPT crystalline structure in all cases. Amorphous samples were obtained after melt quenching, with the exception of PPT‐PNT5, and an increment of Tg as the content of NT units is increased was observed due to the effect of the side methylene groups in the polymeric chain. The Wood equation described well Tg‐composition data. Lastly, the presence of a rigid‐amorphous phase was evidenced in the copolymers, whose amount depended on composition and on thermal treatment. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 170–181, 2008  相似文献   

5.
In this work, three alipharomatic polyesters—poly(propylene terephthalate) (PPT), poly(propylene isophthalate) (PPI), and poly(propylene naphthalate) (PPN)—were prepared and studied with the aliphatic diol 1,3‐propanediol and the corresponding aromatic diacids. Their synthesis was performed by the two‐stage melt polycondensation method in a glass batch reactor. The thermal characterization of these polyesters was carried out with different thermal techniques such as simultaneous thermogravimetry/differential thermal analysis, thermomechanical analysis (TMA), and dynamic thermomechanical analysis. From the recorded values for the glass‐transition temperature (Tg) and melting temperature with all the aforementioned techniques, it could be said that they were in good agreement. According to the thermogravimetric results, PPT and PPI showed about the same thermal stability, whereas PPN seemed to be somewhere more thermostable. Remarkably, a transition existed immediately after Tg that was realized by the first derivative of TMA, and it was characterized as a midrange transition. For all polyesters, the average coefficient of linear thermal expansion was calculated with TMA. The secondary relaxations Tβ and Tγ, recorded with dynamic mechanical thermal analysis, were mainly affected by the kinds of monomers. Concerning the mechanical properties, PPN had the highest tensile strength at break, whereas PPT had the highest elongation at break. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3998–4011, 2005  相似文献   

6.
Poly(dithiotriethylene terephthalate) (PSSTET), poly(dithiotriethylene adipate) (PSSTEA), poly(triethylene terephthalate) (PTET) and poly(triethylene adipate) (PTEA), these two last for comparison, were synthesized and characterized in terms of chemical structure and molecular weight. The thermal behaviour was examined by thermogravimetric analysis and differential scanning calorimetry. All the polymers showed a good thermal stability, even though lower for the sulphur-containing polyesters. At room temperature they appeared as semicrystalline materials, except PTEA, which was an oil; the effect of substitution of ether oxygen atoms with sulphur ones was found to be a lowering in the Tg value, an increment of the melting temperature and an increase of the crystallization rate. The results were explained as due to the presence of flexible C-S-C bonds in the polymeric chain. Lastly, the absence of a rigid-amorphous phase was evidenced in PSSTET and PTET.  相似文献   

7.
A series of α,ω-dihydroxy polyarylene sulfones (PAES) were synthesized comprising bisphenol A (PAES1, Mn=1800, 4900, and 9500 daltons), 4,4-biphenol (PAES2, Mn=4100 daltons), and hexafluorobisphenol A (PAES3, Mn=3300 daltons). These were reacted with α,ω-dibromo poly(vinylidene fluoride) (PVDF, Mn=1200 daltons) prepared by telomerization, to yield block copolymers possessing rigid and flexible segments. Block copolymers were characterized by FTIR, NMR, GPC, DSC, TGA and TEM. In several cases the block copolymers exhibited distinct thermal transitions, i.e. Tm and Tg for PVDF and PAES segments, respectively. Where observable, Tg of PAES domains in the block copolymers occurred at a temperature lower than the corresponding PAES homopolymer due to the flexible nature of the surrounding PVDF domains. Block copolymers exhibited a similar thermal stability to the corresponding PAES homopolymers but higher stability than the PVDF homopolymer, and much higher still than α,ω-dibromo PVDF. TEM analyses indicate that phase separation of PAES and PVDF domains occurs on the nanometer scale.  相似文献   

8.
Poly(neopenthyl azelate) (PNAz) and poly(propylene/neopenthyl azelate) random copolymers (PPAz-PNAz) (NAz unit content from 5 to 20 mol%) were synthesized and characterized in terms of chemical structure and molecular weight. Afterwards, the polyesters were examined by TGA, DSC and X-ray diffractometry. Good thermal stability was found for each sample. The thermal analysis showed that the Tm of the copolymers decreased with the increment in NAz unit content, differently from Tg, which on the contrary increased. X-ray diffraction measurements allowed the identification of the PPAz crystalline structure in all the copolymers. Multiple endotherms were shown in the PPAz-PNAz samples, due to melting and recrystallization processes, similarly to PPAz. The of the copolymers was derived from the application of the Hoffman-Weeks’ method. Baur’s equation described well the Tm-composition data. The isothermal crystallization kinetics were analyzed according to Avrami’s treatment. The introduction of NAz units decreased the crystallization rate compared to pure PPAz. Values of the Avrami’s exponent n close to 3 were obtained in all cases, regardless of Tc, in agreement with a crystallization process originating from predeterminated nuclei and characterized by a three dimensional spherulitic growth.  相似文献   

9.
Poly(ricinoleic acid) (PRA), coming from the self-polycondensation of ricinoleic acid (RA), which derives from castor oil, is a very interesting polymer because of its intrinsic antimicrobial activity. However, its mechanical properties are insufficient for whatever application, thus copolymerization is required. In this work, two polyesters based on 1,3 propanediol (PD), such as poly(propylene terephthalate) (PPT) and poly(propylene isophthalate) (PPI), were chosen to prepare random copolyesters containing ricinoleate units. Different content of RA have been tested, such as 10 and 25 mol% respect to the comonomer (terephthalic or isophthalic dimethylester), to evaluate the lowest composition able to confer antibacterial activity. The materials were tested against Staphylococcus aureus and Escherichia coli, and 25 mol% of RA unit resulted to impart antimicrobial activity. Furthermore, thermal properties (DSC and TGA) as well as the elastomeric response of films were investigated. The copolymer PPI/PRA containing 10 mol% of RA presents very high elongation at break, around 1300%. Therefore, by tuning the RA amount it is possible to obtain outstanding elastomeric or antibacterial materials, suitable for textiles and/or film engineering applications.  相似文献   

10.
Poly(propylene carbonate) (PPC) showed predominantly degradation under electron-beam irradiation, accompanied by deterioration of its mechanical performance due to sharp decrease of the molecular weight. Crosslinked PPC was prepared by addition of polyfunctional monomer (PFM) to enhance the mechanical performance of PPC. When 8 wt% of PFM like triallyl isocyanurate (TAIC) was added, crosslinked PPC with a gel fraction of 60.7% was prepared at 50 kGy irradiation dose, which showed a tensile strength at 20 °C of 45.5 MPa, whereas it was only 38.5 MPa for pure PPC. The onset degradation temperature (Ti) and glass transition temperature (Tg) of this crosslinked PPC was 246 °C and 45 °C, respectively, a significant increase related to pure PPC of 211 °C and 36 °C. Therefore, thermal and mechanical performances of PPC could be improved via electron-beam irradiation in the presence of suitable PFM.  相似文献   

11.
Poly(propylene carbonate) (PPC) is a new biodegradable aliphatic polycarbonate. However, the poor thermal stability and low glass transition temperatures (Tg) have limited its applications. To improve the thermal properties of PPC, organophilic montmorillonite (OMMT) was mixed with PPC by a solution intercalation method to produce nanocomposites. An intercalated-and-flocculated structure of PPC/OMMT nanocomposites was confirmed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The thermal and mechanical properties of PPC/OMMT nanocomposites were investigated by thermal gravimetric analysis (TGA), differential scanning calorimetric (DSC), and electronic tensile tester. Due to the nanometer-sized dispersion of layered silicate in polymer matrix, PPC/OMMT nanocomposites exhibit improved thermal and mechanical properties than pure PPC. When the OMMT content is 4 wt%, the PPC/OMMT nanocomposite shows the best thermal and mechanical properties. These results indicate that nanocomposition is an efficient and convenient method to improve the properties of PPC.  相似文献   

12.
Poly(trimethylene terephthalate) (PTT)/poly(ethylene naphthalate) (PEN) blends were miscible in the amorphous state in all of the blend compositions studied, as evidenced by a single, composition-dependent glass transition temperature (Tg) observed for each blend composition. The variation in the Tg value with the blend composition was well predicted by the Gordon-Taylor equation, with the fitting parameter being 0.57. The cold-crystallization peak temperature decreased with increasing PTT content, while the melt-crystallization peak temperature decreased with increasing amount of the minor component. The subsequent melting behavior after both cold- and melt-crystallization exhibited melting point depression, in which the observed melting temperatures decreased with increasing amount of the minor component. During melt-crystallization, both components in the blends crystallized concurrently just to form their own crystals. The blend with 60% w/w of PTT exhibited the lowest total apparent degree of crystallinity.  相似文献   

13.
The thermal behavior of poly(ethylene‐co‐2,2‐bis[4‐(ethylenoxy)‐1,4‐phenylene]propane terephthalate) (PET/BHEEBT) copolymers was investigated by thermogravimetric analysis and differential scanning calorimetry. A good thermal stability was found for all the samples. The thermal analysis carried out using DSC technique showed that the Tm of the copolymers decreased with increasing BHEEBT unit content, differently from Tg, which on the contrary increased. Wide‐angle X‐ray diffraction measurements permitted identifying the kind of crystalline structure of PET in all the semicrystalline samples. The multiple endotherms similar to PET were also evidenced in the PET/BHEEBT samples, due to melting and recrystallization processes. By applying the Hoffman–Weeks' method, the Tm° of PET and its copolymers was derived. The isothermal crystallization kinetics was analyzed according to Avrami's treatment and values of the exponent n close to 3 were obtained, independently of Tc and composition. Moreover, the introduction of BHEEBT units was found to decrease PET crystallization rate. Lastly, the presence of a crystal‐amorphous interphase was evidenced. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1441–1454, 2005  相似文献   

14.
Copolyesters containing rigid aromatic units based on 4,4′-sulfonylbisphenol (bisphenol S) have been prepared by melt mixing poly(propylene terephthalate) (PPT) with an ethoxylated bisphenol S (sulfonyldiphenol). The insertion of the bisphenol units inside the polymer chain occurred quantitatively and no side reaction has been observed. The copolymers displayed good thermal stability. The main effect of copolymerization was a lowering in the degree of crystallinity and a decrease of the melting temperature with respect to PPT. On the contrary, an increment of T g as the content of bisphenol S units increased due to the stiffening effect of the moieties deriving from bisphenol S. The Wood equation described well the correlation between T g and composition.  相似文献   

15.
16.
Phase behavior of blends of a liquid-crystalline (LC) polymer with a non-LC polymer and of a series of copolymers containing mesogenic and nonmesogenic units was studied by thermal, optical, and dynamic mechanical methods. The polymers composing the blends and the copolymers had the same constituent monomers. The blends exhibited phase separation over the whole range of compositions studied as observed by DSC and dynamic mechanical analysis. Two glass transition temperatures (Tg) corresponding to the two components and independence of melting (Tm) and isotropization temperatures (Ti) to changes in composition were observed for the blends. The copolymers did not show phase separation over most of the composition range studied. Only one Tg corresponding to that of the major component could be detected for the copolymers, and the Tg was found to increase with an increase in the amount of nonmesogenic monomer in the copolymers. The difference in phase behavior was explained on the basis of the chemical environment of the constituent units in the blends and in copolymers. Phase inversion in the blends was observed by microscopy when the blends contained 60 mol% or more of the non-LC polymer.  相似文献   

17.
Modified graphite oxide (MGO)/Poly (propylene carbonate) (PPC) composites with excellent thermal and mechanical properties have been prepared via a facile solution intercalation method. An intercalated structure of MGO/PPC composites was confirmed by X-ray diffraction and scanning electron microscope. The thermal and mechanical properties of MGO/PPC composites were investigated by thermal gravimetric analysis, differential scanning calorimetric, dynamic mechanical analysis, and electronic tensile tester. Due to the nanometer-sized dispersion of layered graphite in PPC matrix and the strong interfacial interaction between MGO and PPC, the prepared MGO/PPC composites exhibit improved thermal and mechanical properties in comparison with pure PPC. Compared with pure PPC, the MGO/PPC composites show the highest thermal stability and the Tg is 13.8 °C higher than that of pure PPC, while the tensile strength (29.51 MPa) shows about 2 times higher than that of pure PPC when only 3.0 wt.% MGO is incorporated. These results indicate that this approach is an efficient method to improve the properties of PPC.  相似文献   

18.
A series of new poly(amide-hydrazide)s were obtained by the direct polycondensation of 5-amino 5′-carbohydrazido-2,2′-bipyridine with commercially available diacids by means of triphenyl phosphite and pyridine in the N-methyl-2-pyrrolidone (NMP) solutions containing dissolved LiCl. The resulting hydrazide containing polymers exhibited inherent viscosities in the 0.42-0.64 dL/g range. All copolymers were soluble in polar solvents such as NMP and dimethyl sulfoxide (DMSO). Most of the amorphous hydrazide copolymers formed flexible and tough films by solvent casting. The poly(amide-hydrazide)s had glass-transition temperatures (Tg) between 178 and 206 °C. All hydrazide copolymers could be thermally converted into the corresponding poly(amide-oxadiazole) approximately in the region of 300-400 °C, as evidenced by the DSC thermograms. The oxadiazole polymers and copolymers showed a dramatically decreased solubility and higher Tg when compared to their respective hydrazide prepolymers. They exhibited Tgs of 197-248 °C and were stable up to 450 °C in air or nitrogen.  相似文献   

19.
Polyether(ester amide)s with poly(propylene oxide) (PPO) and monodisperse poly(hexamethylene terephthalamide) segments were synthesized, and their structure–property relations were investigated. The length of the amide segments was varied from diamide to tetraamide to hexaamide segments, and therefore the number hydrogen bonds per amide segment increased from two to four to six. PPO was end‐capped with 20 wt % ethylene oxide and had number‐average molecular weights of 1000, 2300, and 4000 g/mol (including ethylene oxide tips). The morphology of the poly‐ether(ester amide)s was studied with transmission electron microscopy and atomic force microscopy, the thermal properties were studied with differential scanning calorimetry and dynamic mechanical thermal analysis, and the tensile properties were studied with dumbbell samples. The elastic behavior of the block copolymers was investigated with tensile and compression tests. These segmented copolymers had two sharp transitions: a glass‐transition temperature (Tg) of the PEO–PPO–PEO phase [where PEO is poly(ethylene oxide)] and a melting temperature (Tm) of the amide segments. The amide segments crystallized in nanoribbons with a high aspect ratio 1000. Tm increased with the amide segment length and with decreasing PEO–PPO–PEO content (solvent effect). The modulus increased strongly with the amide content. This modulus increase could be described by the Halpin–Tsai fiber composite model. Increasing the amide segment length surprisingly also improved the elasticity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4769–4781, 2006  相似文献   

20.
The hydrolytic degradation of a series of homo- and co-polyesters analogous to poly(ethylene terephthalate) (PET) and poly(ethylene isophthalate) (PEI), prepared from carbohydrate-based monomers, was studied. The degradation process was carried out at temperatures of approximately 10 °C above the Tg of the polymers. All the studied polyesters were found to degrade at significant rates, and degradability showed a clear dependence on the configuration of the sugar units present in the polymer chain. No weight loss was detected upon degradation, apparently due to the non-solubility of the degraded products in the aqueous incubation medium. Hydrolysis of co-polyesters took place preferentially by cleavage of the ester groups of the sugar units.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号