Mechanical and fracture behavior of polypropylene/poly(ethylene-co-vinyl alcohol) blends compatibilized with ionomer Na

In this work the deformation and fracture behavior of PP/EVOH blends compatibilized with ionomer Na⁺ at room and low temperature was studied. Uniaxial tensile tests on dumb-bell samples and fracture tests on single-edge notched bending (SENB) specimens were performed for 10 wt.% and 20 wt.% EVOH blends with different ionomer content at 23 °C and −20 °C. The incorporation of EVOH to PP led to less ductile materials in tension as judged by the lower values of the ultimate tensile strain displayed by all PP/EVOH blends in comparison to neat PP. In contrast, the ionomer Na⁺ addition partially counteracted this effect. The compatibilizing effect of ionomer Na⁺ was also evident in fracture results since higher values of the fracture parameter were obtained for the ternary blends. SEM observations also confirmed this effect. On the other hand, PP/EVOH blends exhibited different fracture behavior with test temperature. All blends showed “pseudo stable” behavior at room temperature characterized by apparently stable crack growth that could not be externally controlled. On the contrary, blends behaved as semi-brittle at −20 °C with some amount of stable crack growth preceding unstable brittle fracture. Finally, irrespectively of the temperature or the ionomer content all PP/EVOH blends exhibited more ductile fracture behavior with a higher tendency to stable crack propagation than neat polypropylene.     

Thermal degradation studies in poly(vinyl chloride)/poly(methyl methacrylate) blends

The miscibility, morphology, and thermal properties of poly(vinyl chloride) (PVC) blends with different concentrations of poly(methyl methacylate) (PMMA) have been studied. The interaction between the phases was studied by FTIR and by measuring the glass transition temperature (T_g) of the blends using differential scanning calorimetry. Distribution of the phases at different compositions was studied through scanning electron microscopy. The FTIR and SEM results show little interaction and gross phase separation. The thermogravimetric studies on these blends were carried out under inert atmosphere from ambient to 800 °C at different heating rates varying from 2.5 to 20 °C/min. The thermal decomposition temperatures of the first and second stage of degradation in PVC in the presence of PMMA were higher than the pure. The stabilization effect on PVC was found most significant with 10 wt% PMMA content in the PVC matrix. These results agree with the isothermal degradation studies using dehydrochlorination and UV-vis spectroscopic results carried out on these blends. Using multiple heating rate kinetics the activation energies of the degradation process in PVC and its blends have been reported.     

Physical behavior of biodegradable alginate–poly(vinyl alcohol) blend films

Films of biodegradable blends based on sodium alginate for applications in agriculture, as films for the solarization of soils, were prepared and characterized in terms of the mechanical parameters and optical properties. The films analyzed in this study were transparent in the visible region and opaque in the infrared region. This ensured a micro greenhouse effect on the soil. One of the films was also characterized optically in the ultraviolet–visible–infrared region. The optical data were analyzed with a theoretical model, which was able to predict the temperature of the soil at different depths and at different times of the day. The susceptibility time of the film was compatible with its use in agriculture as a film for solarization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1205–1213, 2005     

Preparation of polypropylene (PP)/ethylene octene copolymer (EOC) thermoplastic vulcanizates (TPVs) by high energy electron reactive processing

Thermoplastic vulcanizates (TPVs) based on 50/50 composition of PP/EOC blend were prepared by electron induced reactive processing. To facilitate dynamic crosslinking in the PP/EOC blend, a 1.5 MeV electron accelerator was directly coupled to an internal mixer to induce chemical reactions via high energy electrons under dynamic conditions of melt mixing process. This kind of setup has been conceptualized for the first time in our laboratory and termed as electron induced reactive processing (EIReP) technique. Mechanical, morphological, and rheological properties of PP/EOC TPVs were studied with special reference to the exposure time (16–64 s) keeping absorbed dose (100 kGy) and electron energy (1.5 MeV) invariable. Chain scission dominates over chain crosslinking in both EOC as well as PP phases with the increase in exposure time. The primary factor is found to be the predominance of oxidative degradation during electron induced reactive processing in air atmosphere. The above observation was supported by Fourier Transform Infrared analyses and gel content values. Furthermore, it was found that mechanical properties depend not only on the extent of degradation in the blend system but also on the state and the mode of dispersion of the blend components.     

Study of the miscibility of poly(vinyl pyridines) with poly(vinyl acetate), poly(vinyl alcohol) and their copolymers

Miscibility of poly(4-vinyl pyridine) (P4VP) and poly(2-vinyl pyridine) (P2VP) with poly(viny acetate) (PVAc), poly(vinyl alcohol) PVA and poly(vinyl acetate-co-alcohol) (ACA copolymers) has been investigated over a wide composition range. Differentiaal scanning calorimetry (DSC) results indicate that P2VP is immiscible with PVAC, PVA, and their copolymers over the whole composition range. In turn, P4VP appears to be immiscible with PVAC and PVA, but miscible with some ACA copolymers in certain range of composition. The P4VP-ACA phase diagram for different copolymer compositions has been determined. The variation of the glass transition temperature with composition for miscible mixtures was found to follow the Gordon-Taylor equation, with the parameter κ dependent upon copolymer composition. FTIR analysis of blends reveal the existence of specific interactions via hydrogen bonding between hydroxyl groups and the nitrogen of the pyridinic ring, which appear to be decisive for miscibility. © 1994 John Wiley & Sons, Inc.     

Dynamic and Isothermal Thermogravimetric Degradation of Poly(vinyl Chloride)/Chlorinated Poly(ethylene) Blends

The thermal degradation of poly(vinyl chloride)/chlorinated poly(ethylene) (PVC/CPE) blends of different compositions was investigated by means of dynamic and isothermal thermogravimetric analysis in flowing atmosphere of nitrogen. Kinetic parameters (the apparent activation energy E, and pre-exponential factor Z) were calculated after Flynn-Wall-Ozawa method for the first stage of dynamic degradation of PVC/CPE blends, and after Flynn method for the isothermal degradation. In both cases, there is the compensation dependence between the values E and logZ. The values of compensation ratios as well as the characteristics of TG and DTG curves, confirm the stabilizing effect of CPE on PVC dehydrochlorination. This revised version was published online in July 2006 with corrections to the Cover Date.     

Solid‐state 13C and 129Xe NMR study of poly(vinyl alcohol) and poly(vinyl alcohol)/lactosilated chitosan gels

Dry and hydrated poly(vinyl alcohol) (PVA) gels with 55% (a‐PVA) and 61% (s‐PVA) syndiotacticity and related PVA/lactyl chitosan (LC) blends have been investigated with ¹²⁹Xe and cross‐polarization/magic‐angle‐spinning ¹³C NMR techniques. Although the dry gels exhibit two broad ¹²⁹Xe resonances in the slow‐to‐intermediate exchange limit, both hydrated gels show three resonances. The corresponding dry blends exhibit two signals, the chemical shifts and line widths of which change with respect to those of pure PVA, whereas one (a‐PVA/LC) or two (s‐PVA/LC) signals appear in the spectra of the hydrated blends. A comparative analysis of the data demonstrates that LC rearranges the domains of the polymeric matrix in both the dry and hydrated blends according to the syndiotacticity of the PVA chains. Information on the molecular motions of the amorphous and swollen polymeric domains in the kilohertz range has been obtained from an analysis of the spin‐lattice relaxation times. These data indicate that the dynamics and arrangement of the PVA chains in the gels are strongly affected by their tacticity and the addition of the copolymer LC. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3123–3131, 2003     

Characterization of blends of poly(vinyl chloride) and poly(N‐vinyl pyrrolidone) by FTIR and 13C CP/MAS NMR spectroscopy

Blends of poly(vinyl chloride) (PVC) with Poly(N‐vinyl pyrrolidone) (PVP) were investigated by Fourier infrared spectroscopy (FTIR) and high‐resolution solid‐state ¹³C cross‐polarization/magic angle spinning (CP/MAS) nuclear magnetic resonance (NMR) spectroscopy. The intermolecular interactions between PVP and PVC are weaker than the self‐association of PVP and the inclusion of the miscible PVC results in the decreased self‐association of PVP chains, which was evidenced by the observation of high‐frequency shift of amide stretching vibration bands of PVP with inclusion of PVC. This result was further substantiated by the study of ¹³C CP/MAS spectra, in which the chemical shift of carbonyl resonance of PVP was observed to shift to a high field with inclusion of PVC, indicating that the magnetic shielding of the carbonyl carbon nucleus is increased. The proton spin‐lattice relaxation time in the laboratory frame (T₁ (H)) and the proton spin‐lattice relaxation time in the rotating frame (T_1ρ(H)) were measured as a function of the blend composition to give the information about phase structure. It is concluded that the PVC and PVP chains are intimately mixed on the scale of 20–30Å. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2412–2419, 1999     

FTIR study of water clusters in water–triethylamine solutions

The FTIR study presented in this work, on water dissolved in triethylamine (TEA), reveals the formation of water clusters in the TEA liquid phase at tenths of water molar concentrations. In the OH stretching region, the FTIR spectra of water in TEA show, at high frequencies, a narrow band at 3682 cm⁻¹ and, at low frequencies, a wide band that can be resolved into four peaks with maxima at 3249 cm⁻¹, 3348 cm⁻¹, 3440 cm⁻¹ and 3545 cm⁻¹. The results have been rationalised assuming the formation of clusters containing tens of three- and four-coordinated water molecules. TEA molecules surrounding the clusters are hydrogen bonded to one OH of the water molecules at the surface, leaving dangling protons. Further, the analyses of the spectra suggest that, in the used range, the water cluster mean size does not depend strongly on the water concentration.     

PP-g-(St-co-MMA)/PP/PVC共混物相容性研究

利用扫描电子显微镜(SEM)和X射线能谱仪(EDS)对聚丙烯／聚氯乙烯(PP80／PVC20)二元体系,以及聚丙烯多单体接枝物[PP-g-(St-co-MMA)]／PP／PVC三元体系的相容性进行了研究。由X射线能谱微区分析得到了共混物中氯元素面分布图。对氯元素面分布进行了粒径分布统计和面积计算。实验结果表明：在PP80／PVC20共混物100份中加入6份PP-g-(St-co-MMA)增容剂时,增容效果最好;进一步增加PP-g-(St-co-MMA)含量时,PP／PVC的相容性反而降低。差示扫描量热仪(DSC)的实验结果也佐证了SEM和EDS的实验结果。     

Viscometric study of poly(vinyl chloride)/poly(vinyl acetate) blends in various solvents

The intermolecular interactions between poly(vinyl chloride) (PVC) and poly(vinyl acetate) (PVAc) in tetrahydrofuran (THF), methyl ethyl ketone (MEK) and N,N^′-dimethylformamide (DMF) were thoroughly investigated by the viscosity measurement. It has been found that the solvent selected has a great influence upon the polymer-polymer interactions in solution. If using PVAc and THF, or PVAc and DMF to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+THF) or (PVAc+DMF) is less than in corresponding pure solvent of THF or DMF. On the contrary, if using PVAc and MEK to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+MEK) is larger than in pure solvent of MEK. The influence of solvent upon the polymer-polymer interactions also comes from the interaction parameter term Δb, developed from modified Krigbaum and Wall theory. If PVC/PVAc blends with the weight ratio of 1/1 was dissolved in THF or DMF, Δb<0. On the contrary, if PVC/PVAc blends with the same weight ratio was dissolved in MEK, Δb>0. These experimental results show that the compatibility of PVC/PVAc blends is greatly associated with the solvent from which polymer mixtures were cast. The agreement of these results with differential scanning calorimetry measurements of PVC/PVAc blends casting from different solvents is good.     

Studies of photooxidative degradation of poly(vinyl chloride)/poly(ethylene oxide) blends

The photooxidative degradation of blends (in a full range of compositions) of amorphous poly(vinyl chloride) (PVC) with semicrystalline poly(ethylene oxide) (PEO) in the form of thin films is investigated using absorption spectroscopy (UV–visible and Fourier transform infrared) and atomic force microscopy (AFM). The amount of insoluble gel formed as a result of photocrosslinking is estimated gravimetrically. It is found that the PVC/PEO blendsí susceptibility to photooxidative degradation differs from that pure of the components and depends on the blend composition and morphology. Photoreactions such as degradation and oxidation are accelerated whereas dehydrochlorination is retarded in blends. The photocrosslinking efficiency in PVC/PEO blends is higher than in PVC; moreover, PEO is also involved in this process. AFM images showing the lamellar structure of semicrystalline PEO in the blend lead to the conclusion that the presence of PVC does not disturb the crystallization process of PEO. The changes induced by UV irradiation allow the observation of more of the distinct PEO crystallites. This is probably caused by recrystallization of short, more mobile chains in degraded PEO or by partial removal of the less stable amorphous phase from the film surface. These results confirm previous information on the miscibility of PVC with PEO. The mechanism of the interactions between the components and the blend photodegradation are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 585–602, 2004     

Specific interactions in blends of poly(ethylene oxide) and poly(bisphenol A-co-epichlorohydrin): FTIR and thermal study

Blends of poly(ethylene oxide) (PEO) of high molecular weight with poly(bisphenol A-co-epichlorohydrin) (PBE) with high epoxy equivalent were studied spectroscopically, thermally and morphologically. As similar systems of low molecular weight, a single T_g was observed for all blends, indicating miscibility. A progressive decrease in the degree of crystallinity and in the size of the PEO spherulites as the PBE is added is also observed. Quantitative analysis from FTIR spectra provided determination of specific interactions between the constituents and their variation with PEO content. Simulations were performed utilising the spectra of the pure polymers to confirm that the observed changes in the experimental spectra of the blends were due to interaction between the polymers.     

Biodegradable hybrid polymer films based on poly(vinyl alcohol) and collagen hydrolyzate

Hybrid blends of poly(vinyl alcohol) (PVA) and collagen hydrolyzate (CH), an added value waste from leather indutry, have been converted by blown molding extrusion, to environmentally degradable films. Blown extruded films comprising 5-15% of CH, were tested as sel fertilizing mulching films and analyzed for their propensity to enviromental degradation. PVA/CH films rapidly disintegrate when buried in soil, and resulted promising for application such as transplanting films, with additional fertilizing action of CH.     

Effect of poly(ethylene oxide) on the structure and properties of poly(vinyl alcohol)

To improve the drawability of poly(vinyl alcohol) (PVA) thermal products, poly(ethylene oxide) (PEO), a special resin with good flexibility, excellent lubricity, and compatibility with many resins, was applied, and the Fourier transform infrared spectroscopy, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and wide‐angle X‐ray diffraction (WXRD) were adopted to study the hydrogen bonds, water states, thermal properties, crystal structure, and nonisothermal crystallization of modified PVA. It was found that PEO formed strong hydrogen bonds with water and PVA, thus weakened the intra‐ and inter‐hydrogen bonds of PVA, changed the aggregation states of PVA chains, and decreased its melting point and crystallinity. Moreover, the interactions among PVA, water, and PEO retarded the water evaporation and made more water remain in the system to plasticize PVA. The existence of PEO also slowed down the melt crystallization process of PVA, however, increased the nucleation points of system, thus made more and smaller spherulites formed. The weakened crystallization capability of PVA and the lubrication of PEO made PVA chains to have more mobility under the outside force and obtain high mechanical properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1946–1954, 2010     

Thermo-oxidative dehydrochlorination of rigid and plasticised poly(vinyl chloride)/poly(methyl methacrylate) blends

The aim of this work was to study the thermo-oxidative dehydrochlorination of rigid and plasticised poly(vinyl chloride)/poly(methyl methacrylate) blends. For that purpose, blends of variable compositions from 0 to 100 wt% were prepared in the presence (15, 30 and 50 wt%) and in the absence of diethyl-2-hexyl phthalate as plasticiser. Their miscibility was investigated by using differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR). Their thermo-oxidative degradation at 180 ± 1 °C was studied and the amount of HCl released from PVC was measured by a continuous potentiometric method. Degraded samples were characterised, after purification, by FTIR spectroscopy and UV-visible spectroscopy. The results showed that the two polymers are miscible up to 60 wt% of poly(methyl methacrylate) (PMMA). This miscibility is due to a specific interaction of hydrogen bonding type between carbonyl groups (CO) of PMMA and hydrogen (CHCl) groups of PVC as shown by FTIR analysis. On the other hand, PMMA exerted a stabilizing effect on the thermal degradation of PVC by reducing the zip dehydrochlorination, leading to the formation of shorter polyenes.     

Thermal degradation of poly(vinyl chloride)/poly(ethylene oxide) blends: Thermogravimetric analysis

Thermal stability of poly(vinyl chloride)/poly(ethylene oxide) (PVC/PEO) blends has been investigated by thermogravimetric analysis (TGA) in dynamic and isothermal heating regime. PVC/PEO blends were prepared by hot-melt extrusion (HME). According to TG analysis, PEO decomposes in one stage, while PVC and PVC/PEO blends in two degradation stages. In order to evaluate the effect of PEO content on the thermal stability of PVC/PEO blends, different criteria were used. It was found that thermal stability of PVC/PEO blends depends on the blend composition. The interactions of blends components with their degradation products were confirmed. By using multiple heating rate kinetics the activation energies of the PVC/PEO blends thermal degradation were calculated by isoconversional integral Flynn–Wall–Ozawa and differential Friedman method. According to dependence of activation energy on degree of conversion the complexity of degradation processes was determined.     

Dynamics of a poly(isoprene)/poly(vinyl ethylene) blend revisited: Component polymer relaxation and blend behavior

Motivated by recent molecular dynamics simulation studies of miscible blends of dynamically disparate polymers, we have revisited the experimentally measured dielectric relaxation in a 50/50 blend of poly(isoprene) and poly(vinyl ethylene) (PI/PVE). In contrast to efforts to explain the dielectric loss in PI/PVE blends in terms of a distribution of local environments leading to a broad distribution of segmental relaxation times (the so-called concentration fluctuation model), our analysis indicates that there is no evidence for significant broadening of the relaxation processes in the component polymers upon blending. Rather, we find that the dielectric loss of the 50/50 PI/PVE blend can be represented as a sum of α- and β-relaxation processes for the component polymers represented with Havriliak-Negami functions whose shape and relaxation strength are consistent with those obtained for the pure PI and PVE melts. The α-relaxation process for the PVE component was found to be dramatically influenced by blending, moving to much higher frequency with moderate narrowing, while the α-relaxation process for the PI component shifted to somewhat lower frequency with slight broadening, consistent with our MD simulations of a model blend and 2D NMR measurements on PI/PVE blends. In contrast, the β-processes in the PVE and PI components were found to be essentially uninfluenced by blending, with the latter accounting for the significant high-frequency loss observed in the PI/PVE blend.     

Effect of the molecular weight of poly(vinyl alcohol) on the water stability of a syndiotactic poly(vinyl alcohol)/iodine complex film

To precisely identify the effect of the molecular weight of syndiotactic poly(vinyl alcohol) (s-PVA) on the water stability of a s-PVA/iodine complex film, we prepared four s-PVAs with similar syndiotactic diad (s-diad) contents of about 63% and with different number-average degrees of polymerization, P_n, of 900, 6,000, 10,000, and 17,000, respectively. The desorption behavior of iodine in the s-PVA/iodine complex film in water was investigated in relation to the solubility of s-PVA in water. The degree of solubility of a s-PVA film having different P_n in water at 80 °C was limited to about 0.3-10%, whereas the degrees of solubility of atactic PVA films with P_n of 6,000 and 10,000 were 100% at the same conditions. The degree of iodine desorption of the complex film decreased with increasing P_n of s-PVA. Especially, the degree of iodine desorption of a PVA drawn film having P_n of 17,000 was limited to 2%, regardless of soaking temperature from 40 to 80 °C. The desorption of iodine in water was strongly affected by the dissolution of PVA. In addition, the degree of iodine desorption of the drawn s-PVA/iodine film was larger than that of the undrawn one.     

Positron annihilation and differential scanning calorimetry investigations in poly(methylmethacrylate)/low molecular weight poly(ethylene oxide) polymer blends

Positron annihilation lifetime spectroscopy (PALS) and differential scanning calorimetry (DSC) measurements were performed in atactic poly(methylmethacrylate) and low molecular weight poly(ethylene oxide) (PEO) polymer blends, prepared by codissolution in acetonitrile, covering the full range of composition. Results from the two techniques indicate that a “window of miscibility” is attained at around 20–30 wt % of the semicrystalline PEO. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1045–1052, 2000