溶致液晶作模板水凝胶的制备及其表征

以表面活性剂Brij 58溶致液晶(LLC)为模板, 采用光聚合的方法合成了结构规整的新型溶致液晶型聚丙烯酰胺(PAAm)水凝胶, 并对其结构、形貌和性能进行了研究. 扫描电镜结果表明活性剂Brij 58用量为10%～40%时, 可形成结构规整、孔径均一的LLC型水凝胶, 其孔径为1～2 µm, 约为普通水凝胶的1/40. 当Brij 58浓度大于50%时, 体系发生相分离, 此时合成的水凝胶含水量及孔隙率下降. 傅立叶变换红外光谱(FTIR)显示, LLC型水凝胶中羰基和氨基的红外吸收向低波数方向移动, 表明其中形成了大量的分子间氢键. 同时, LLC型PAAm水凝胶还保持了普通水凝胶的pH敏感性, 相同条件下, 其溶胀比大于普通水凝胶.     

Optical and morphological characterization of polyacrylamide hydrogel and liquid crystal systems

In this work, the thermotropic liquid crystal MBBA (N-(4-methoxybenzilidene)-4-butylaniline), entrapped on hydrogels, based on cross-linked polyacrylamide (PAAm), was studied. The liquid crystalline phases of system were characterized by polarized optical microscopy (POM), refractive index, optical transmittance, scanning electron microscopy (SEM) and water loss. It was verified the presence of birefringence on hydrogel + liquid crystal. The dynamic of formation of such birefringence finished 40 days after the hydrogel synthesis. The effective birefringence Δn, i.e., the difference on refractive index of polyacrylamide hydrogel to refractive index of hydrogel + liquid crystal (Δn₁) and the difference on refractive index of liquid crystal (MBBA) to refractive index of hydrogel + liquid crystal (Δn₂) are dependent of content of acrylamide (AAm) and MBBA on hydrogel. The increase on Δn₁ and Δn₂ with the polyacrylamide content on hydrogel was attributed to decreasing of the mobility liquid crystal inside the hydrogel. Also, an increase on MBBA concentration in the polymeric matrix provides a reduction in the values of optical transmittance in the system. The morphology observed by SEM shows that hydrogel + liquid crystal is more compact that PAAm hydrogels. The presence of MBBA causes an increase in hydrophobicity. The water loss speed is favored by the increase in the amount of MBBA present in the hydrogels.     

Biomimetic Nucleation and Morphology Control of CaCO_3 in PAAm Hydrogels Synthesized from Lyotropic Liquid Crystalline Templates

Hydrogels have been thought to be the material which can provide appealing replacements of biological organisms. Pores of hydrogels synthesized from lyotropic liquid crystalline (LLC) templates were smaller in size and more uniform than those of traditional hydrogels. LLC poly‐acrylamide (PAAm) hydrogels were used as the growth media of CaCO₃. After copolymerized with acrylic acid and 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS), LLC hydrogels were modified with COOH and SO₃H, respectively. The effect of functional groups on the biomimetic mineralization of CaCO₃ was studied. Most of crystals from traditional hydrogels are rhombohedral and could not form aggregates. Only a few could aggregate and have a particular morphology with irregular orientation of subcrystal. Compared with crystals separated from traditional hydrogels, crystals growing in the LLC hydrogels were much more regulated and could form aggregates with particular morphology and regular orientation, that is, face (104) of rhombohedral subcrystals parallel to the surface of the macrocrystals. Modification of COOH and SO₃H groups made CaCO₃ subcrystal align more tightly. COOH had minor influences on the crystal orientation and small modification to the aggregate morphology. SO₃H groups could change the crystal orientation and morphology effectively. The aggregates are pseudo‐spherical and the face perpendicularity to the face (104) parallels to the surface of the aggregates.     

Collagen-based highly porous hydrogel without any porogen: Synthesis and characteristics

In this contribution we have developed a collagen-based highly porous hydrogel by neutralizing the grafted poly(acrylamide-co-acrylic acid) after gel formation. Preparation of the hydrogels involved free radical polymerization of a combination of hydrolyzed collagen, acrylic acid (AA), acrylamide (AAm) and distilled water, in appropriate amounts and contained a crosslinking agent called N,N′-methylene bisacrylamide (MBA). The chemical structure of the hydrogels was characterized by means of FTIR spectroscopy, DSC and TGA thermal methods. Morphology of the samples was examined by scanning electron microscopy (SEM). Systematically, the certain variables of the graft copolymerization were optimized to achieve maximum swelling capacity. The absorbency under load (AUL) and centrifuge retention capacity (CRC) were measured. The swelling ratio in various salt solutions was also determined and additionally, the swelling of hydrogels was measured in solutions with pH ranged 1-13. The synthesized hydrogel exhibited a pH-responsiveness character so that a swelling-collapsing pulsatile behavior was recorded at pH 2 and 8.     

Swelling behavior of strong polyelectrolyte poly(N-t-butylacrylamide-co-acrylamide) hydrogels

Temperature-sensitive ionic hydrogels based on N-t-butylacrylamide (TBA), acrylamide (AAm), 2-acrylamido-2-methylpropane sulfonic acid sodium salt (AMPS) and N,N^′-methylenebis(acrylamide) (BAAm) monomers were prepared. The molar ratio of TBA to the monomers AAm and AMPS was fixed at 60/40, while the AMPS content of the hydrogels was varied. The elastic modulus of the hydrogels was in the range of 347-447 Pa, much lower than the modulus of PAAm or poly(N-isopropylacrylamide) hydrogels due to the reduced crosslinking efficiency of BAAm in TBA/AAm copolymerization. The hydrogels exhibited swelling-deswelling transition in water depending on the temperature. Increasing ionic group (AMPS) content resulted in shifting of the transition temperature interval in which the deswelling takes place. The higher the ionic group content, the broader the temperature interval at the phase transition. Ionic hydrogels exhibited first-order reentrant conformational transitions in ethanol-water and in dimethylsulfoxide (DMSO)-water mixtures. The higher the ionic group content of the hydrogels the narrower the ethanol (or DMSO) range in which the reentrant phenomena occur. By taking into account the difference of the solvent mixture composition inside and outside the gel, the equilibrium swelling theory provided a satisfactory agreement to the experimental swelling data of the hydrogels immersed in the solvent mixtures.     

Synthesis and lyotropic liquid crystal properties of chiral helical polycarbodiimides

Chiral helical polymers have been expected to exhibit optical activity with a significantly large optical rotation power. In this paper polymethylphenylethylcarbodiimides (Poly-PhEMCDI) with helical structure were synthesized by the insertion polymerization of a corresponding chiral monomeric carbodiimide initiated by a copper complex. The circular dichroism spectra and optical rotation power induced by the ordered rigid main chain helical structure of polycarbodiimides, in solution and as cast films, were studied. Polycarbodiimides have a rigid rod helical structure and form lyotropic liquid crystal (LLC) in organic solvents such as dichloromethane (DCM), chloroform and THF. The LLC phase was studied using polarizing optical microscopy and X-ray diffraction. A chiral nematic phase was formed in DCM and chloroform in the concentration range 20–36%. Spherulites were formed in more concentrated solution. The formation of a LLC phase in polycarbodiimides organic solutions makes it possible to align the polymer helical chain to form an ordered film for electro-optical applications.     

Synthesis and lyotropic liquid crystal properties of chiral helical polycarbodiimides

Chiral helical polymers have been expected to exhibit optical activity with a significantly large optical rotation power. In this paper polymethylphenylethylcarbodiimides (Poly-PhEMCDI) with helical structure were synthesized by the insertion polymerization of a corresponding chiral monomeric carbodiimide initiated by a copper complex. The circular dichroism spectra and optical rotation power induced by the ordered rigid main chain helical structure of polycarbodiimides, in solution and as cast films, were studied. Polycarbodiimides have a rigid rod helical structure and form lyotropic liquid crystal (LLC) in organic solvents such as dichloromethane (DCM), chloroform and THF. The LLC phase was studied using polarizing optical microscopy and X-ray diffraction. A chiral nematic phase was formed in DCM and chloroform in the concentration range 20-36%. Spherulites were formed in more concentrated solution. The formation of a LLC phase in polycarbodiimides organic solutions makes it possible to align the polymer helical chain to form an ordered film for electro-optical applications.     

Preparation of homogeneous polyacrylamide hydrogels by free-radical crosslinking copolymerization

Network microstructures of acrylamide (AAm)-based hydrogels were investigated by static and dynamic light scattering techniques. The hydrogels were prepared by free-radical crosslinking copolymerization of the monomers acrylamide (AAm), N,N-dimethylacrylamide (DMA) and N-isopropylacrylamide (NIPA) with N,N′-methylenebis(acrylamide) as a crosslinker in aqueous solutions. It was observed that the addition of DMA or NIPA into the comonomer feed suppresses the extent of frozen concentration fluctuations in polyacrylamide (PAAm) hydrogels. The cooperative diffusion coefficient increases while both the static and dynamic correlation lengths decrease as the amount of DMA in the comonomer feed is increased. Formation of homogeneous PAAm hydrogels by introduction of hydrophobic moieties was explained as a result of the steric effect of the bulky side groups on DMA or NIPA segments.     

Synthesis and Properties of Poly(AAm‐KMA‐MA) Hydrogels

In this investigation, poly(acrylamide‐co‐potassium methacrylate‐co‐maleic acid) hydrogels, poly(AAm‐KMA‐MA) were synthesized by redox copolymerization in aqueous solution. The effect of reaction parameters, such as concentration of maleic acid, crosslinking agent, initiator and activator, on the swelling behavior was investigated in detail. The swelling/diffusion characteristics were also evaluated for 1,4‐butanediol diacrylate (BDDA) and 1,2‐ethyleneglycol dimethacrylate (EGDMA) crosslinked hydrogels having different amounts of maleic acid. The results indicate that the water diffusion of hydrogels was of a non‐Fickian type. The hydrogels were characterized by IR spectroscopy and thermogravimetric analysis (TGA). Their surface characteristics were observed by using scanning electron microscopy (SEM). Furthermore, their swelling phenomena in different pH and salt solutions and simulated biological fluids was also studied.     

Green synthesis and swelling behavior of Ag-nanocomposite semi-IPN hydrogels and their drug delivery using Dolichos biflorus Linn

Acrylic-based hydrogels with great potentials for usage in medical area were principally synthesized as per two strategies. The first involved reaction containing silver nitrate to yield silver nanoparticles (AgNPs) where Dolichos biflorus Linn acted as both reducing agent and stabilizing for green synthesized AgNPs was added to the reaction medium to establish reduction of Ag+ to AgNPs. The second strategy entailed preparation of nanosilver composite hydrogel that is carried out by free radical polymerization reaction in presence of Sodium Alginate and acrylamide (AAm) under the same conditions. In both strategies, factors affecting the characterization of AgNPs-loaded hydrogels were studied. Analysis and characterization of the so obtained hydrogels were performed through monitoring swelling behavior, FTIR spectroscopy, SEM, EDX, UV–Vis spectrophotometer, XRD, and TEM. Results indicate that modifying AAm and silver ion can improve swelling properties of the resultant nanocomposite hydrogel. pH response of this nanocomposite hydrogel in different pH made it suitable for drug delivery applications.     

溶致液晶中金属纳米粒子的掺杂及其作用机制研究

在用琥珀酸二异辛酯磺酸钠(AOT)构建的具有长程有序结构的层状溶致液晶内, 用不同方式导入预制的亲油或亲水贵金属纳米粒子, 可得到纳米粒子分布在不同介观空间内的无机/有机杂合体. 依据小角X射线散射和偏光显微镜结果, 通过分析掺杂纳米粒子与液晶模板的相互作用, 对掺杂前后体系结构的变化及制得杂合体的稳定性进行了表征. 结果表明, 除考虑掺杂粒子与层状模板空间的匹配外, 体系中静电斥力、范德华引力和Helfrich涨落力之间的平衡是维持液晶结构稳定的基本条件.     

Temperature Sensitive Superabsorbent Hydrogels from Poly(N-t-butyl acrylamide-co-acrylamide) Grafted on Sodium Alginate

Temperature-sensitive hydrogels based on N-t-butylacrylamide (TBA), acrylamide (AAm), and sodium alginate were prepared by free radical polymerization method. Methylenebisacrylamide (MBA) and amonium persulfate (APS) were applied as water soluble crosslinker and initiator, respectively. The chemical structure of the hydrogels was confirmed by FT-IR spectroscopy and thermogravimetric analysis (TGA) methods. Morphology of the samples was examined by scanning electron microscopy (SEM). By changing the initial TBA/AAm mole ratios, hydrogels with different swelling properties were obtained. The rate parameters were found to be 2.0, 2.4, and 3.5 min for the superabsorbents with AAm/TBA weight ratio of 1.0, 1.3 and 2.0 respectively. The swelling behavior in distilled water and different pH solutions was investigated. A preliminary swelling kinetics and the absorbency under load (AUL) were also studied. At the applied pressure (2.07 kPa), maximum swelling was found to be 17, 19, and 21 (g/g) for the superabsorbent hydrogels with AAm/TBA weight ratios of 1.0, 1.5 and 2.0, respectively.     

Occurrence of Both Sinusoidal and Zigzag Supermolecular Structures Associated with Band Textures in a Liquid Crystalline Polymer

Band textures are observed in a precipitation film from a presheared poly(1,4-phenylene terephthalamide) solution, a typical lyotropic main-chain polymeric liquid crystal. By polarized optical microscopy (POM) studies and in the same specimen system, both sinusoidal and zigzag supermolecular structures associated with band textures are found, according to the comparison between the experimental micrographs and the theoretical birefringence patterns. As a consequence, the present paper describes how to distinguish these two supermolecular structures merely by POM and demonstrates that both structure models are reasonable. © 1997 John Wiley & Sons, Ltd.     

Electrodeposition of mesoporous semimetal and magnetic metal films from lyotropic liquid crystalline phases

Mesoporous semimetal bismuth film and magnetic metal nickel and cobalt thin films have been electrodeposited from hexagonal or lamellar structured lyotropic liquid crystalline phases with polyoxyethylene surfactant. The liquid crystalline templates are characterized by low-angle X-ray diffraction (XRD) and polarized-light optical microscopy (POM). The metal films are characterized by low-angle and wide-angle XRD, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The magnetic measurements on the mesoporous nickel and cobalt films are shown to have higher coercivity (Hc) than the nonporous polycrystalline films.     

(Sodium Alginate/Acrylamide) Semi‐Interpenetrating Polymer Networks and their Usability on Removal of Lead,Cadmium, Nickel Ions

In this study, (sodium alginate (NaAlg)/acrylamide (AAm)) interpenetrating polymer networks (IPN) have been prepared at three different compositions, where the sodium alginate composition varies 1, 2, and 3% (w/v) in 50% (w/v) acrylamide solutions. These solutions have been irradiated with a ⁶⁰Co‐γ source at different doses. The percent conversion was determined gravimetrically and 100% gelation was achieved at the 10.0 kGy dose. The swelling results at pH 7.0 and 9.0 indicated that (NaAlg/AAm)3IPN hydrogel, containing 3% NaAlg showed maximum % swelling in water, with swelling increasing in the order of Ni²⁺>Cd²⁺>Pb²⁺. Diffusion in aqueous solutions of metal ions within (NaAlg/AAm)IPN hydrogels was found to be Fickian character. Diffusion coefficients of (NaAlg/AAm)IPN hydrogels in water and aqueous solutions of metal ions were calculated. The maximum weight loss temperature and half life temperature for NaAlg, PAAm, (NaAlg/AAm)IPN and (NaAlg/AAm)IPN‐metal ion systems were found from thermal analysis studies. In the adsorption experiments, the efficiency of (NaAlg/AAm)IPN hydrogels to adsorb nickel, cadmium and lead ions from water was studied. (NaAlg/AAm)IPN hydrogels showed different adsorption for different aqueous solution of metal ion at pH 7.0. Adsorption isotherms were constructed for the (NaAlg/AAm)IPN‐metal ion systems. S type adsorption in the Giles classification system was found.     

Swelling equilibria and dye adsorption studies of chemically crosslinked superabsorbent acrylamide/maleic acid hydrogels

Superswelling acrylamide (AAm)/maleic acid (MA) hydrogels were prepared by free radical polymerization in aqueous solution of AAm with MA as comonomer with some multifunctional crosslinkers such as trimethylolpropane triacrylate and 1,4-butanediol dimethacrylate. AAm/MA hydrogels were used in experiments on swelling and adsorption of a water-soluble monovalent cationic dye such as Basic Blue 17 (Toluidin Blue). As a result of dynamic swelling tests, the influence of relative content of MA on the swelling properties of the hydrogel systems was examined. AAm/MA hydrogels were swollen in the range 1660-6050% in water, while AAm hydrogels swelled in the range 780-1360%. Equilibrium water content of AAm/MA hydrogels were calculated in the range 0.8873-0.9837. Water intake of hydrogels followed a non-Fickian type diffusion. The uptake of the cationic dye, BB-17 to AAm/MA hydrogels is studied by batch adsorption technique at 25 °C. In the experiments of the adsorption equilibrium, S-type adsorption in Giles's classification system was found. The binding ratio of hydrogel/dye systems was gradually increased with the increase of MA content in the AAm/MA hydrogels.     

Synthesis and Characterization of pH‐sensitive Poly(IA‐co‐AAc‐co‐AAm) Hydrogels via Frontal Polymerization

In this work, we report a series of poly(itaconic acid‐co‐acrylic acid‐co‐acrylamide) (poly(IA‐co‐AAc‐co‐AAm)) hydrogels via frontal polymerization (FP). FP starts on the top of the reaction mixture with aid of heating provided from soldering iron gun. Once polymerization initiated, no further energy is required to complete the process. The influences of IA/AAc weight ratios on frontal velocities, temperatures, and conversions on the reaction time are thoroughly investigated and discussed where the amount of AAm monomer remains constant. Fourier transform‐infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscope (SEM), dynamic mechanical analysis, and the swelling measurement are applied to characterize the as‐synthesized poly(IA‐co‐AAc‐co‐AAm) hydrogels. Interestingly, the swelling ratios of the hydrogels are changed with different IA/AAc contents, and the maximum swelling ratios are ~4439% in water. SEM images describe highly porous morphologies and explain good swelling capabilities. Moreover, the poly(IA‐co‐AAc‐co‐AAm) hydrogels exhibit superior pH‐responsive ability. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2214–2221     

Lyotropic Liquid Crystal to Soft Mesocrystal Transformation in Hydrated Salt–Surfactant Mixtures

Hydrated CaCl₂, LiI, and MgCl₂ salts induce self‐assembly in nonionic surfactants (such as C₁₂H₂₅(OCH₂CH₂)₁₀OH) to form lyotropic liquid‐crystalline (LLC) mesophases that undergo a phase transition to a new type of soft mesocrystal (SMC) under ambient conditions. The SMC samples can be obtained by aging the LLC samples, which were prepared as thin films by spin‐coating, dip‐coating, or drop‐casting of a clear homogenized solution of water, salt, and surfactant over a substrate surface. The LLC mesophase exists up to a salt/surfactant mole ratio of 8, 10, and 4 (corresponding to 59, 68, and 40 wt % salt/surfactant) in the CaCl₂, LiI, and MgCl₂ mesophases, respectively. The SMC phase can transform back to a LLC mesophase at a higher relative humidity. The phase transformations have been monitored using powder X‐ray diffraction (PXRD), polarized optical microscopy (POM), and FTIR techniques. The LLC mesophases only diffract at small angles, but the SMCs diffract at both small and wide angles. The broad surfactant features in the FTIR spectra of the LLC mesophases become sharp and well resolved upon SMC formation. The unit cell of the mesophases expands upon SMC transformation, in which the expansion is largest in the MgCl₂ and smallest in the CaCl₂ systems. The POM images of the SMCs display birefringent textures with well‐defined edges, similar to crystals. However, the surface of the crystals is highly patterned, like buckling patterns, which indicates that these crystals are quite soft. This unusual phase behavior could be beneficial in designing new soft materials in the fields of phase‐changing materials and mesostructured materials, and it demonstrates the richness of the phase behavior in the salt–surfactant mesophases.     

Synthesis and properties of a novel double network nanocomposite hydrogel

A novel polyacrylamide/polyacrylic acid (PAAm/PAA) double network (DN) nanocomposite (NC) hydrogel had been synthesized by two‐step solution polymerization. The PAAm network was crosslinked by inorganic clay while the PAA network was crosslinked by a chemical crosslinker. The chemical structure of the network was confirmed by Fourier transform infrared (FTIR), X‐ray diffraction (XRD), and transmission electron microscopy (TEM). The swelling and mechanical strength properties of PAAm/PAA hydrogels were examined. The results showed that a DN hydrogel achieved both a high swelling capacity of 1219 g/g in deionized water and 124 g/g in 0.9 wt% NaCl solution and high compressive stress of 21.5 kPa in a high water content of 99.58%. Copyright © 2008 John Wiley & Sons, Ltd.     

New hydrogels based on the interpenetration of physical gels of agarose and chemical gels of polyacrylamide

In this paper we report a novel method for preparing interpenetrating polymer hydrogels of agarose and polyacrylamide (PAAm) in three steps. The procedure consists in (i) formation of physical hydrogels of agarose, (ii) diffusion of acrylamide, N,N′-methylene-bis-acrylamide and potassium persulfate (the initiator) from aqueous solutions inside the gel of agarose, and (iii) cross-linking copolymerization reaction of the aforementioned reactants to produce PAAm chemical gels interpenetrated with the agarose physical gels. Viscoelasticity measurements and thermal analysis have been performed in order to follow the kinetics of copolymerization. The viscoelastic, swelling and thermal properties of the resulting hydrogels confirm the formation of an interpenetrated system. Further evidence of interpenetration is obtained from inspection with atomic force microscopy. The improvement of the agarose and PAAm gel properties in the resulting interpenetrated hydrogel is analyzed in view of the results.