Synthesis, structure and mesomorphic properties of side-chain chiral liquid crystalline polysiloxanes based on (S)-(+)-2-methyl-1-butanol derivatives

The synthesis of five chiral liquid crystalline monomers (M₁-M₅), and their corresponding side-chain polymers (P₁-P₅) based on (S)-(+)-2-methyl-1-butanol derivatives is described. The chemical structures of the monomers were confirmed by FT-IR, ¹H NMR, and elemental analyses. The structure-property relationships of the monomers and polymers obtained are discussed. The mesomorphic properties were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), polarizing optical microscopy (POM), and X-ray diffraction (XRD) measurements. All monomers showed a cholesteric phase. For M₂, M₃, and M₅, besides a cholesteric phase and a smectic A (S_A) phase, M₂ also revealed an enantiotropic chiral smectic C phase and a monotropic smectic B (S_B) phase, and M₃ also showed a S_B phase. The polymers P₁-P₅ exhibited a S_A phase, moreover, P₂, P₃ and P₅ also revealed a phase. The experimental results demonstrated that a flexible siloxane backbone and a long flexible spacer tended to exhibit a low glass transition temperature, high thermal stability, and wide mesophase temperature range.     

Mesomorphic properties of side-chain cholesteric liquid-crystalline elastomers

New monomer cholesteryl 4-(10-undecylen-1-yloxybenzoyloxy)-4′-ethoxybenzoate (M₁), crosslinking agent biphenyl 4,4′-bis(10-undecylen-1-yloxybenzoyloxy-p-ethoxybenzoate) (M₂) and a series of side-chain cholesteric elastomers were prepared. The chemical structures of the monomers and elastomers obtained were confirmed by element analyses, FT-IR, and ¹H NMR. The mesomorphic properties and thermal stability were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction measurements. The influence of the content of the crosslinking unit on the phase behavior of the elastomers was examined. M ₁ showed cholesteric phase, and M ₂ displayed nematic phase. The elastomers containing less than 12 mol% of the crosslinking units revealed reversible mesomorphic phase transition, wide mesophase temperature ranges, and high thermal stability.     

Preparation and phase behavior of side‐chain cholesteric liquid‐crystalline elastomers

A series of new side‐chain cholesteric elastomers derived from cholesteryl 4‐(10‐undecylen‐1‐yloxy)‐4′‐ethoxybenzoate and phenyl 4,4′‐bis(10‐undecylen‐1‐yloxybenzoyloxy‐p‐ethoxybenzoate) was synthesized. The chemical structures of the monomers were confirmed by elemental analyses, Fourier transform infrared, and ¹H NMR and ¹³C NMR spectra. The mesomorphic properties of elastomers were investigated with differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X‐ray diffraction measurements. The influence of the content of the crosslinking unit on the phase behavior of the elastomers was examined. Monomer M₁ showed a cholesteric phase, and M₂ displayed smectic and nematic phases. The elastomers containing <15 mol % of the crosslinking units revealed reversible mesomorphic phase transition, wide mesophase temperature ranges, and high thermal stability. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3315–3323, 2005     

Synthesis, structure and mesomorphism of new cholesteric monomers and smectic comblike polymers

Seven new cholesteric monomers (M-1−M-7) and the corresponding smectic comblike polymers containing cholesteryl groups (P-1−P-7) were synthesized. The chemical structures and purity were characterized by FT-IR, ¹H NMR, and elemental analyses. The specific optical rotations were evaluated with a polarimeter. The mesomorphism was investigated by polarizing optical microscopy, differential scanning calorimetry, thermogravimetric analysis, and X-ray diffraction. The specific optical rotation values of these monomers and polymers with the same numbers of phenyl ring and terminal groups were nearly equal, however, they decreased with increasing the aryl numbers in the mesogenic core. M-1−M-7 showed oily streak texture and focal conic texture, or fingerprint texture, or spiral texture of cholesteric phase. P-1−P-7 showed the smectic A phase. The melting, clearing, and glass transition temperatures increased, and the mesophase temperature ranges widened with increasing the aryl number in the mesogenic core. Surprisingly, although the molecular structures of M-6 and M-7 were similar to those of M-4, namely the mesogenic cores contained three phenyl rings, their phase behavior had a considerable difference, and T_m and T_i of M-6 and M-7 were less than those of M-4. In addition, M-6 and M-7 also showed an obvious glass transition. TGA showed that all the polymers had good thermal stabilities.     

Metallomesogens derived from benzoxazoles-salicylaldimine conjugates

The synthesis, characterization, and mesomorphic properties of a new series of Schiff bases 2a-h and metal complexes 1a-h-M are prepared and their mesomorphic properties studied. Two single crystallographic structures of 2d (n=12, m=1) and 1g-Pd (n=m=12) were determined by X-ray analysis. Both compounds crystallize in a triclinic space group P−1. A dimeric structure formed by intermolecular H-bonds in 2d was observed, giving nematic phase due to a better aspect ratio. The central geometry at Pd²⁺ ion is nearly perfect square plane. All Schiff bases 2a-h formed N or/and SmC phases. The formation of mesophases of complexes 1a-h-M was strongly dependent on metal ions incorporated. All Cu²⁺, Ni²⁺ and Pd²⁺ complexes exhibited N or/and SmC phase, respectively. However, Zn²⁺ and Co²⁺ complexes were not mesogenic. The lack of mesomorphism was probably attributed to a preferred tetrahedral geometry at Zn²⁺ and Co²⁺ over a square-planar geometry at Cu²⁺ and Pd²⁺.     

Preparation, thermal properties, morphology, and microstructure of phosphorus-containing epoxy/SiO2 and polyimide/SiO2 nanocomposites

A phosphorus-containing tri-ethoxysilane (dopo-icteos) reacting from the nucleophilic addition reaction of 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (dopo) and 3-(trieoxysilyl) isocyanate (icteos) was synthesized. The structure of dopo-icteos was confirmed by ¹H, ¹³C, ³¹P NMR and IR spectra. A triethylamine catalyzed mechanism for the dopo-icteos synthesis was proposed and verified by NMR spectra. The phosphorus-containing epoxy/SiO₂ and polyimide/SiO₂ nanocomposites were prepared from the in-situ curing of diglycidyl ether of bisphenol A (DGEBA)/4,4-diaminodiphenylmethane(DDM)/dopo-icteos, and imidization of poly(amic acid) of pyromellitic dianhydride (PMDA)/4,4′-oxydianiline (ODA)/dopo-icteos, respectively. The microstructure and morphology were investigated by ²⁹Si NMR, scanning electron microscope (SEM), EDS (Si and P mapping) analysis and atomic force microscope (AFM). The thermal properties, flame retardancy and dielectric properties of the organic-inorganic hybrids were investigated by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), limiting oxygen index (LOI), thermal gravimetric analysis (TGA) and dielectric analyzer (DEA).     

Unsymmetric 1,3,4-oxa(thia)diazoles of quinoxaline–naphthalene conjugates

Two new series of unsymmetric 1,3,4-oxa(thia)diazoles 1a,b containing both quinoxaline and naphthalene moieties were prepared and their mesomorphic properties were investigated. The mesomorphic behavior of compounds 1a,b and 2 was studied by DSC analysis and polarized optical microscopy. All compounds 1a and 2 exhibited hexagonal columnar phases (Col_h), which were also confirmed by powder XRD diffractometer. N_cell and R_ar values equal to 5.23 and 22.73 Å² within a slice of 9.0 Å thick were also obtained for 1a (n=16), indicating that a more disc-like structure constructed by two molecules lying side-by-side was correlated in Col_h phases. In contrast, all compounds 1b were not mesogenic, and the lack of mesomorphic properties in 1b might be due to their unfavorable conformations. The PL spectra of all compounds 1a,b showed one intense peak at λ_max=509–512 nm, and these photoluminescent emissions originated from quinoxaline moiety.     

A novel strapped porphyrin receptor for molecular recognition

A novel strapped porphyrin receptor Zn1, in which two electron-rich bis(p-phenylene)-34-crown ether-10 units are incorporated, has been designed and synthesized from the newly developed intermediate 7 for investigating new chemistry of molecular recognition. ¹H NMR and UV-Vis studies revealed that Zn1 displays relatively weak binding abilities to neutral electron deficient naphthalene-1,8,4,5-tetracarboxydiimide (NDI) derivatives 13 (no simple complexing stoichiometry was observed), 19 (K_a=48(±5) M⁻¹) and 30 (K_a=46(±5) M⁻¹) in chloroform-d, strong binding ability to pyridine derivative 25, (K_a=1.5(±0.12)×10³ M⁻¹) in chloroform, moderately strong binding ability to tetracationic compound 35·4PF₆ (K_a=475(±50) M⁻¹) in acetone-d₆, and very strong binding affinity to compound 22 (K_a=6.5(±0.7)×10⁵ M⁻¹), which consists of one pyridine and two NDI units, in chloroform. Remarkable cooperative effect of the intermolecular metal-ligand coordination and donor-acceptor interactions in complex Zn1·22 was observed by comparing the complexing behaviors between Zn1 and the appropriately designed guests. Complex Zn1·22 possesses an unique three-dimensional tri-site binding feature. For comparison, the complexing affinity of 1 toward compounds 13, 19, and 30 in chloroform-d and 35·4PF₆ in acetone-d₆ has also been investigated and the binding patterns in different complexes were explored. The results demonstrate that strapped porphyrin derivatives are ideal precursors for constructing new generation of three-dimensional multi-site artificial receptors for molecular recognition and host-guest chemistry.     

Mixed ligand complexes of AEE hexafluoroacetylacetonates with diglyme: Synthesis,crystal structure and thermal behavior

The novel mixed ligand complexes [Ca(hfa)₂(diglyme)(H₂O)] (I), [Sr(hfa)₂(diglyme)(H₂O)] (II) and [Ba(hfa)₂(diglyme)₂] (III) (Hhfa = 1,1,1,5,5,5-hexafluoropentane-2,4-dione, diglyme = 2,5,8-trioxanonane) were synthesized by the reactions of the alkaline earth element (AEE) carbonates in n-hexane with a mixture of Hhfa and diglyme, and they were characterized by elemental analysis, ¹H and ¹³C NMR, and FTIR spectroscopy. The crystal structures of I–III, consisting of mononuclear isolated molecules, have been determined. The thermal behavior and composition of the vapor phase have been studied for I–III by thermal analysis at low pressure and mass spectrometry using a Knudsen cell. The stability of the mixed ligand complexes [M(hfa)₂(diglyme)_n] to the removal of diglyme molecules under heating decreases in the row I > II ≈ III, and only I evaporates as the mixed ligand complex after water removal.     

A combined experimental and theoretical study of metallic salts of thiapentadienyl, sulfinylpentadienyl and butadienesulfonyls

Alternative methods for the synthesis of the following acyclic salts (CH₂CHCHCHS)M [M = K, 1(K); Na, 1(Na); Li, 1(Li)], (CH₂CHCHCHSO)M [M = K, 2(K); Na, 2(Na)], (CH₂CHCHCHSO₂)M [M = K, 3(K); Na, 3(Na); Li, 3(Li)], (CH(Me)CHC(Me)CHSO₂)M [Me5-syn, M = K, 9(K); Na, 9(Na); Li, 9(Li), (CH(Me)CHCHC(Me)S)M [Me5-syn, M = K, 10(K); Na, 10(Na); Me5-anti, M = K, 11(K); Na, 11(Na)] are described, as a result of the activation of C-S bond in dihydrothiophenes by deprotonation with different bases. The effect of methyl substituents in the dihydrothiophenes is significant, which modifies considerably the choice of the base. The influence of the reaction conditions, type of solvent, base and dihydrothiophenes is analyzed. The NMR spectroscopy, including NOESY, ROESY and difference NOE establish the preferred U conformation for all derivatives, and support a delocalization of charge on the thiapentadienyl (1M) and sulfinylpentadienyl (2M) complexes. However, a conjugated diene structure is proposed on the butadienesulfonyl compounds (3M), in which the negative charge is delocalized in the SO₂ fragment and stabilized with the corresponding cations (M = K, Na and Li). In presence of traces of base, compounds 3M suffer a rearrangement, to the most stable S conformer, 13M. The stability of 3M depends on the size of the cation, the greater the size, the greater stability. Furthermore, a theoretical study shows that electronic and geometrical properties (energy conformers, charge distributions and relative stabilities) of the thiapentadienyl, sulfinylpentadienyl and butadienesulfonyl anions and their corresponding metal salts 1M-3M (M = Li, Na and K) shows to be in good agreement with the experimental findings.     

Highly stable pseudo[2]rotaxanes co-driven by crown ether-ammonium and donor-acceptor interactions

Bis-p-phenylene-34-crown-10 derivatives 1 and 2, bearing one and two dibenzo[24]crown-8 units, respectively, and 4,4′-dipyridinium derivatives of 3·3PF₆ and of 4·4PF₆, bearing one and two ammonium groups, respectively, have been synthesized from readily available starting materials. ¹H NMR and UV-vis studies reveal that in polar acetonitrile 1 binds 3·3PF₆ to produce pseudo[2]rotaxane 1·3·3PF₆ by making use of one donor-acceptor and one electrostatic interaction, whereas 2 binds 4·4PF₆ to form pseudo[2]rotaxane 2·4·4PF₆ through one donor-acceptor and two electrostatic interactions. The association constants of the two pseudorotaxanes have been determined by the UV-vis titration method to be 9.1 (±1.0)×10³ M⁻¹ and 6.5 (±0.7)×10⁵ M⁻¹, respectively. The high stability of the new pseudo[2]rotaxanes has been ascribed to the cooperative interaction of the two different non-covalent forces.     

Control of molecular weight distribution in polycondensation polymers 2. Poly(ether ketone) synthesis

Synthesis of aromatic poly(ether ketone) (3) with a narrow molecular weight distribution (M_w/M_n) was investigated via polycondensation. M_ns of 3 could be controlled varying the feed ratio of monomer (1) and initiator (2) maintaining relatively narrow M_w/M_ns (<1.3). The kinetics of polycondensation obeyed a first-order relationship between polycondensation time and -(1/[2]₀) ln([1]/[1]₀), and the rate of polycondensation was estimated as 2.57 mol⁻¹ L h⁻¹. MALDI-TOF mass analysis of 3 indicated that polycondensation should proceed via chain growth manner to give 3 having an initiator unit in each chain end.     

Dynamic behaviour of 1,n′-disubstituted ferrocenes

1,n′-Disubstituted ferrocenes with ketone/phthalimido (2) and ketone/amine substituents (3) were synthesised and characterised by IR, ¹H NMR, ¹³C NMR, VT ¹H NMR, UV/Vis spectroscopy, mass spectrometry and cyclic voltammetry. The molecular structure of 2 was confirmed by X-ray crystal structure determination. The dynamic behaviour was experimentally studied in solution and theoretically by DFT calculations. The thermal stability of the ketone/amine derivative 3 was investigated using thermal analyses.     

Diastereoselective syntheses and oxygenation of silyl fulleroids

The addition of silyl diazomethane (1a-d) to fullerene C₆₀ at room temperature provided the mono-adducts, the bis- and tris-adducts of silyl fulleroid (3a-d) in moderate yields. The structures of the silyl fulleroids were characterized by mass spectroscopy, as well as ¹H and ¹³C NMR. The gated ¹H NMR and ¹³C-¹H COLOC analyses of 3a-d showed a correlation between the methine proton resonances and three fullerene carbons. These observations, as well as the ¹H NMR chemical shifts of the methine protons, suggest a remarkable diastereoselectivity, with the silyl groups located above a five-membered ring. Two transition states of the thermal nitrogen-extrusion of pyrazoline intermediate (2a) were theoretically obtained, the structures of which disclosed that the diastereoselectivity is a consequence of minimization of the repulsive interaction between the silyl groups and the N₂ moiety. The bridgehead CC double bond of the silyl fulleroid is thought to be reactive by POAV analyses. The silyl fulleroids (3a,b) were found to react with singlet oxygen to afford the silyl enol ether (9a,b) via 1,3-silyl migration of a diketone (8a,b). This is the first example of ¹O₂ oxygenation of fulleroids.     

Multiple hydrogen-bond-induced supramolecular nanostructure from a pincer-like molecule and a [60]fullerene derivative

A new supramolecular self-assembled system between a perylene bisimide bearing diaminopyridine-substituted isophthalamide groups (PP) and a [60]fullerene containing barbituric acid moiety (C₆₀bar) through a complementary six-point hydrogen-bonding interaction was constructed. The formation of hydrogen bonding was confirmed by ¹H NMR spectra studies in CDCl₃. Fluorescence quenching experiments indicated that the fluorescence of PP was greatly quenched by the hydrogen-bonded C₆₀bar (K_sv=2.71×10⁴ M⁻¹). A steady and rapid cathodic 0.15 μA cm⁻² photocurrent response of the PP/C₆₀bar film deposited onto an ITO electrode was produced under the irradiation of 20 mW cm⁻² white light, indicating the presence of photo-induced electron transfer between PP and C₆₀bar. TEM images showed that spherical particles were fabricated by the self-assembly of PP and C₆₀bar through hydrogen-bonding interaction.     

Titanium-based mixed oxides from a series of titanium(IV) citrate complexes

The isostructural hexaaquatransition-metal/titanium citrate complexes (NH₄)₂[M(H₂O)₆][Ti(H₂cit)₃]₂·6H₂O [M(II)=Mn 1, Fe 2, Co 3, Ni 4, Cu 5, and Zn 6] (H₄cit=citric acid), which were synthesized by reacting titanium(IV) citrate with divalent metal salts in the 1.0-3.5 pH range, adopt hydrogen-bonded chain motifs. The crystal structures feature three bidentate citrate anions that chelate to the titanium atom through their negatively charged α-alkoxy and α-carboxy oxygen atoms; the chelation is consistent with the large downfield shifts of ¹³C NMR for carbon atoms for complex 6. The thermal decomposition of the complexes furnishes mixed metal oxides. The main-group magnesium analog when heated at 600 °C yielded MgTi₂O₅ that is of the pseudobrookite type; the particle size is approximately 30 nm.     

NMR, potentiometric and ESI-MS combined studies on the zinc(II) magnesium(II) and calcium(II) complexation by (morpholin-1-yl)methane-1,1-diphosphonic acid and its thio-analog

The crystal structures of the two derivatives of aminomethane-1,1-diphosphonic acid with morpholinyl- (1) and thiomorpholinyl- (2) side chains were determined by single crystal X-ray diffraction and discussed with respect to molecular geometry and solid state organization. The protonation equilibria, solution behavior and complex-formation equilibria in solutions of 1 and 2 with the Zn(II), Mg(II) and Ca(II) ions were studied by means of NMR, pH-potentiometry and ESI-MS methods.As the pK_(NH⁺) protonation constants of 1 and 2 are high (11.65 and 11.91, respectively) two different approaches were used to evaluate the pH-potentiometric data. The first approach disregarded the proton-dissociation from the NH⁺ group. In the second one, all the pK_a values were considered in the M(II):ligand formation equilibria. For 1, the accuracy of the pK_(NH⁺) determination was shown to be sufficient to calculate reliable stability constants of metal complexes with the use of both approaches. For 2, only approach neglecting the pK_(NH⁺) protonation constant was shown to be correct.The studied acids form dinuclear, [M₂L₃H_x], [M₂L₂H_x] and mononuclear MLH_x and ML₂H_x complexes with different degree of ligand protonation. Tendency to undergo some oligomerization with the increase in the metal and ligand concentration was demonstrated for the [CaLH] complex of 1 and 2. As far as 1 and 2 remain protonated, the Zn(II), Mg(II) and Ca(II) ions are coordinated exclusively through oxygen atoms of the phosphonate groups. The metal promoted proton dissociation from the NH⁺ ring atom takes place in alkaline pH.     

Synthesis and characterisation of Pd(II) complexes with a derivative of aminoazobenzene: Dynamic H-NMR study of cyclopalladation reactions in DMF

Three new Pd(II) complexes, i.e. [PdCl₂L]₂ (A), PdCl₂L₂ (B) and [Pd(μ-Cl)(L-H)]₂ (C), each with two diethyl [α-(4-benzenazoanilino)-2-hydroxybenzyl]phosphonates (L) bound to either one or two palladium atoms, are synthesized and characterized by elemental analysis, by IR, UV-vis and solid-state ¹³C-NMR spectra. Complexes B and C are additionally characterized by ¹H-, ¹³C- and ³¹P-NMR and electrospray mass spectrometry (ESMS) studies using dimethylformamide (DMF) as a solvent. In DMF solution adducts A and B undergo spontaneous rearrangement into the cyclopalladated complex C. Dynamic ¹H-NMR study of this rearrangement as well as of the reactions of L with PdCl₂ and Na₂PdCl₄ revealed a complex equilibrium in DMF solutions and enabled the formation mechanism of all involved species to be resolved. The complex A is immediately solvolyzed producing two molecules of intermediate M [PdCl₂(L)(DMF)]. Complex M was also the first intermediate in the reaction of L with PdCl₂. Once present in concentration above 10⁻⁵ mol dm⁻³M dimerizes very fast into chloro-bridged dimer [PdCl(μ-Cl)(L)]₂ (D) which undergoes cyclopalladation and converts into the complex C. The formation of C from the intermediate D is clearly demonstrated by the concentration dependence of the cyclopalladation reaction which has order greater than one. Chloride ions, released by cyclopalladation, react with D by splitting chloro-bridge and binding to metal atoms to produce byproduct [PdCl₃(L)]⁻ (T). The same species T are formed in the reaction of L with Na₂PdCl₄ whereby a chloride ion is replaced by the ligand L. The complex B undergoes similar, but slower, solvolytic reaction producing M and L while further reaction steps are identical as in the solvolysis of A.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.