Amidoamine-based dendrimers with end-grafted Pd-Fe units: Synthesis, characterization and their use in the Heck reaction

The synthesis and characterization of novel amidoamine-based metallodendrimers with heterobimetallic end-grafted amidoferrocenyl-palladium-allyl chloride units is described. Dendrimer (Fe((η⁵-C₅H₄PPh₂)(η⁵-C₅H₄))C(O)HNCH₂CH₂NHC(O)CH₂CH₂)N[CH₂CH₂N(CH₂CH₂C(O)NHCH₂CH₂NH-C(O)(Fe(η⁵-C₅H₄)(η⁵-C₅H₄PPh₂)))₂]₂ (9-Fe) and the corresponding metal species (Fe((η⁵-C₅H₄PPh₂(Pd(η³-C₃H₅)Cl))(η⁵-C₅H₄))C(O)HNCH₂CH₂NHC(O)CH₂CH₂)N[CH₂CH₂N(CH₂CH₂C(O)NHCH₂CH₂NHC(O)(Fe(η⁵-C₅H₄)(η⁵-C₅H₄PPh₂(Pd(η³-C₃H₅)Cl))))₂]₂ (9-Fe-Pd) were prepared by a consecutive divergent synthesis methodology including addition-amidation cycles, standard peptide coupling, and coordination procedures. For comparative reasons also the monomeric and dimeric molecules (Fe(η⁵-C₅H₄PPh₂)(η⁵-C₅H₄C(O)NHⁿC₃H₇)) (5-Fe) and [Fe(η⁵-C₅H₄PPh₂)(η⁵-C₅H₄C(O)NHCH₂)]₂ (6-Fe) as well as N(CH₂CH₂C(O)NHCH₂CH₂NHC(O)(Fe(η⁵-C₅H₄)(η⁵-C₅H₄PPh₂)))₃ (7-Fe) and [CH₂N(CH₂CH₂C(O)NHCH₂CH₂NHC(O)(Fe(η⁵-C₅H₄)(η⁵-C₅H₄PPh₂)))₂]₂ (8-Fe) were prepared from Fe(η⁵-C₅H₄PPh₂)(η⁵-C₅H₄CO₂H) (3). Using [Pd(η³-C₃H₅)Cl]₂ (4) as palladium source heterobimetallic metallodendrimers (Fe(η⁵-C₅H₄PPh₂(Pd(η³-C₃H₅)Cl))(η⁵-C₅H₄C(O)NHⁿC₃H₇)) (5-Fe-Pd), [Fe(η⁵-C₅H₄PPh₂(Pd(η³-C₃H₅)Cl))(η⁵-C₅H₄C(O)NHCH₂)]₂ (6-Fe-Pd), N(CH₂CH₂C(O)NHCH₂CH₂NHC(O)(Fe(η⁵-C₅H₄)(η⁵-C₅H₄PPh₂(Pd(η³-C₃H₅)Cl))))₃ (7-Fe-Pd) and [CH₂N(CH₂CH₂C(O)NHCH₂CH₂NHC(O)(Fe(η⁵-C₅H₄)(η⁵-C₅H₄PPh₂(Pd(η³-C₃H₅)Cl))))₂]₂ (8-Fe-Pd) were synthesized. Additionally, seleno-phosphines of 5-Fe-Se and 9-Fe-Se, respectively, were prepared by addition of elemental selenium to 5-Fe or 9-Fe to estimate their σ-donor properties.The palladium-containing amidoamine supports are catalytically active in the Heck-Mizoroki cross-coupling of iodobenzene with tert-butyl acrylate. The catalytic data are compared to those obtained for the appropriate mononuclear and dinuclear compounds 5-Fe-Pd and 6-Fe-Pd. This comparison confirms a positive cooperative effect. The mercury drop test showed that (nano)particles were formed during catalysis, following on heterogeneous carbon-carbon cross-coupling.     

Mono and dinuclear complexes of half-sandwich platinum group metals (Ru, Rh and Ir) bearing a flexible pyridyl-thiazole multidentate donor ligand

The mononuclear cationic complexes [(η⁶-C₆H₆)RuCl(L)]⁺ (1), [(η⁶-p-ⁱPrC₆H₄Me)RuCl(L)]⁺ (2), [(η⁵-C₅H₅)Ru(PPh₃)(L)]⁺ (3), [(η⁵-C₅Me₅)Ru(PPh₃)(L)]⁺ (4), [(η⁵-C₅Me₅)RhCl(L)]⁺ (5), [(η⁵-C₅Me₅)IrCl(L)]⁺ (6) as well as the dinuclear dicationic complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (7), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (8), [{(η⁵-C₅H₅)Ru(PPh₃)}2(L)]²⁺ (9), [{(η⁵-C₅Me₅)Ru(PPh₃)}₂(L)]²⁺ (10), [{(η⁵-C₅Me₅)RhCl}₂(L)]²⁺ (11) and [{(η⁵-C₅Me₅)IrCl}₂(L)]²⁺ (12) have been synthesized from 4,4′-bis(2-pyridyl-4-thiazole) (L) and the corresponding complexes [(η⁶-C₆H₆)Ru(μ-Cl)Cl]₂, [(η⁶-p-ⁱPrC₆H₄Me)Ru(μ-Cl)Cl]₂, [(η⁵-C₅H₅)Ru(PPh₃)₂Cl)], [(η⁵-C₅Me₅)Ru(PPh₃)₂Cl], [(η⁵-C₅Me₅)Rh(μ-Cl)Cl]₂ and [(η⁵-C₅Me₅)Ir(μ-Cl)Cl]₂, respectively. All complexes were isolated as hexafluorophosphate salts and characterized by IR, NMR, mass spectrometry and UV-vis spectroscopy. The X-ray crystal structure analyses of [3]PF₆, [5]PF₆, [8](PF₆)₂ and [12](PF₆)₂ reveal a typical piano-stool geometry around the metal centers with a five-membered metallo-cycle in which 4,4′-bis(2-pyridyl-4-thiazole) acts as a N,N′-chelating ligand.     

Syntheses and characterization of ferrocenylthiocarboxylate-containing coordination compounds for nonlinear optics

Four metal-organic coordination compounds containing ferrocenylthiocarboxylate components, [Cd₂(η²-SOCFc)₂(η¹-μ₂-SOCFc)₂(4,4′-bpy)]_n (1), [Cd(SOCFc)₂(tmp)]_n (tmp = 4,4′-trimethylene-dipyridine) (2) [Zn(SOCFc)₂(2,2′-bpy)] (3), and {[Hg(SOCFc)₂(phen)] · (0.5CH₃OH)} (4) (Fc = (η⁵-C₅H₅)Fe(η⁵-C₅H₄)), have been prepared in search of good nonlinear optical (NLO) materials. Investigation of the NLO properties shows that Hg-containing compound 4 exhibits very strong third-order NLO absorptive and refractive effects. The NLO absorptive coefficient α₂ value (2.11 × 10⁻¹⁰ m W⁻¹) is larger than those of all the reported ferrocenylcarboxylate-containing coordination compounds and comparable to the well-performing Hg-containing complexes. Additionally, we further analyzed their NLO behaviors through studying electrochemical properties of the four compounds.     

Versatility in the mode of coordination {(N), (N,O), (C,N) or (C,N,O)} of [(η-C5H5)Fe{(η-C5H4)-CHN-(C6H4-2OH)}] to palladium(II)

The study of the reactivity of the ferrocenyliminoalcohol [(η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-CHN-(C₆H₄-2OH)}] (1b) with Na₂[PdCl₄] or Pd(OAc)₂ has allowed the isolation and characterization of the heterotrimetallic complexes: trans-[Pd{(η⁵-C₅H₅)Fe[(η⁵-C₅H₄)-CHN-(C₆H₄-2OH)]}₂Cl₂] (2b), [Pd{[(η⁵-C₅H₃)-CHN-(C₆H₄-2O)]Fe(η⁵-C₅H₅)}{(η⁵-C₅H₅)Fe[(η⁵-C₅H₄)-CHN-(C₆H₄-2OH)]}] (3b) and trans-[Pd{(η⁵-C₅H₅)Fe[(η⁵-C₅H₄)-CHN-(C₆H₄-2O)]}₂] (4b). Ligand 1b acts as a (N) (in 2b) or a (N,O)⁻ (in 4b) ligand; while in 3b the two units of the iminoalcohol exhibit simultaneously different modes of binding {(N) and [C(sp², ferrocene),N,O]²⁻}. The crystal structures of 2b · 3H₂O and 3b · 1/2CHCl₃ are also reported and confirm the mode of binding of the ligand in these compounds. The relative importance of the factors affecting the preferential formation of products (2b-4b) is also discussed. The study of the reactivity of 3b with PPh₃ has enabled the obtention of the cyclopalladated complexes [Pd{[(η⁵-C₅H₃)-CHN-(C₆H₄-2O)]Fe(η⁵- C₅H₅)}(PPh₃)] (6b) and [Pd{[(η⁵-C₅H₃)-CHN-(C₆H₄-2OH)]Fe(η⁵-C₅H₅)}Cl(PPh₃)] (7b), in which 1b behaves as a [C(sp², ferrocene),N,O]²⁻ (in 6b) or [C(sp², ferrocene),N]⁻ (in 7b) ligand. Treatment of 3b with MeO₂C-CC-CO₂Me produces [Pd{[(MeO₂C-CC-CO₂Me)₂(η⁵-C₅H₃)-CHN-(C₆H₄-2O)]Fe(η⁵-C₅H₅)}] (8b), that arises from the bis(insertion) of the alkyne into the σ[Pd-C(sp², ferrocene)] bond. The comparison of the results obtained for 1b and [C₆H₅-CHN-(C₆H₄-2OH)] (1a) has allowed to establish the influence of the substituents on the imine carbon on their reactivity in front of palladium(II) as well as on the lability of the Pd-ligands bond. ⁵⁷Fe Mössbauer studies of 2b-4b and 6b provide conclusive evidence of the effect induced by the mode of binding of 1b on the environment of the iron(II).     

Carbon-rich organometallic materials derived from 4-ethynylphenylferrocene

Using 4-ethynylphenylferrocene (1) as the building block, a new series of rigid-rod alkynylferrocenyl precursors consisting of fluoren-9-one unit, 2-bromo-7-(4-ferrocenylphenylethynyl)fluoren-9-one (2a), 2,7-bis(4-ferrocenylphenylethynyl)fluoren-9-one (2b), 2-trimethylsilylethynyl-7-(4-ferrocenylphenylethynyl)fluoren-9-one (3) and 2-ethynyl-7-(4-ferrocenylphenylethynyl)fluoren-9-one (4) have been prepared in moderate to good yields. The acetylene complex 4 is a useful precursor for the synthesis of well-defined carbon-rich ferrocenyl heterometallic complexes, trans-[(η⁵-C₅H₅)Fe(η⁵-C₅H₄)C₆H₄CCRCCPt(PEt₃)₂Ph] (5), trans-[(η⁵-C₅H₅)Fe(η⁵-C₅H₄)C₆H₄CCRCCPt(PBu₃)₂CCRC≡CC₆H₄(η⁵-C₅H₄)Fe(η⁵-C₅H₅)] (6), trans-[(η⁵-C₅H₅)Fe(η⁵-C₅H₄)C₆H₄CCRCCM(dppm)₂Cl] (M=Ru (7), Os (8)) (R=fluoren-9-one-2,7-diyl). All new complexes have been characterized by FTIR, NMR and UV-Vis spectroscopies and fast atom bombardment mass spectrometry (FABMS). The molecular structures of 1, 2a, 4, 6 and 8 have been determined by single-crystal X-ray studies where an ironiron through-space distance of nanosized dimension (ca. 42 Å) is observed in the trimetallic molecular rod 6. The electronic absorption, luminescence and electrochemical properties of these carbon-rich molecules were investigated and the data were correlated with the theoretical results obtained by the method of density functional theory.     

Synthesis and characterization of triosmium and triruthenium pyrene clusters

The reaction between 1-pyrenecarboxaldehyde (C₁₆H₉CHO) and the labile triosmium cluster [Os₃(CO)₁₀(CH₃CN)₂] gives rise to the formation of two new compounds by competitive oxidative addition between the aldehydic group and an arene C-H bond, to afford the acyl complex [Os₃(CO)₁₀(μ-H)(μ-COC₁₆H₉)] (1) and the compound [Os₃(CO)₁₀(μ-H) (C₁₆H₈CHO)] (2), respectively. Thermolysis of [Os₃(CO)₁₀(μ-H)(μ-C₁₆H₉CO)] (1) in n-octane affords two new complexes in good yields, [Os₃(CO)₉(μ-H)₂(μ-COC₁₆H₈)] (3) and the pyryne complex [Os₃(CO)₉(μ-H)₂(μ₃-η¹:η¹:η²-C₁₆H₈)] (4).In contrast, when 1-pyrenecarboxaldehyde reacts with [Ru₃(CO)₁₂] only one product is obtained, [Ru₃(CO)₉(μ-H)₂(μ₃-η¹:η¹:η²-C₁₆H₈)] (5), a nonacarbonyl cluster bearing a pyrene ligand. All compounds were characterized by analytical and spectroscopic data, and crystal structures for 1, 2, 4 and 5 were obtained.     

Synthesis and property of BrCCH- and BrCCBr-coordinated tetrairon clusters

The reaction of (η⁵-C₅H₄Me)₄Fe₄(HCCH)₂ (1) with 1 equiv. of N-bromosuccinimide (NBS) gives the one-electron oxidized form in 83% yield. Further treatment of [1]⁺ with NBS results in the stepwise bromination of four acetylenic protons to give [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(HCCBr)]⁺ ([2]⁺), [(η⁵-C₅H₄Me)₄Fe₄(HCCBr)₂]⁺ ([3a]⁺), [(η⁵-C₅H₄Me)₄Fe₄(HCCBr)(BrCCBr)]⁺ ([4]⁺), and [(η⁵-C₅H₄Me)₄Fe₄(BrCCBr)₂]⁺ ([5]⁺) in moderate yields, with the isomer of [3a]⁺, [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(BrCCBr)]⁺ ([3b]⁺), formed as a minor product. These compounds are characterized by analytical and spectroscopic techniques, and the molecular structures of [2](PF₆), [4](TFPB), and [5](TFPB) are established by X-ray diffraction analysis [TFPB = tetrakis{bis(3,5-trifluoromethyl)phenyl}borate]. The compounds are confirmed to retain the butterfly core of four iron atoms as in [1](TFPB). The bromoacetylene part in [2]⁺ exhibits high reactivity toward various nucleophiles: Cluster[2]⁺ is moisture-sensitive and is converted to a mixture of [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(μ₃-CH)(μ₃-CO)]⁺ ([6]⁺) and [1]⁺. Reactions of [2]⁺ with ZnR₂ (R = Me, Et) give [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(HCC-R)]⁺ in good yields (R = Me ([9]⁺, 88%), Et ([10]⁺, 91%)). Accordingly, treatment of [2]⁺ with HC CMgBr and LiS^pTol leads to the introduction of the ethynyl and thiolate groups to give [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(HCC-CCH)]⁺ ([11]⁺, 95%) and [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(HCC-S^pTol)]⁺ ([12]⁺, 78%), respectively. Substitution of the bromo group in [2]⁺ with pyridine affords [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(HCC-Py)]²⁺ ([13]²⁺) in 90% yield. The reaction with 4,4′-bipyridyl (bpy) requires the severer conditions (70 °C, 2 days), probably due to the relative low basicity of bpy, giving [(η⁵-C₅H₄Me)₄Fe₄(HCCH)(HCC-bpy)]²⁺ ([14]²⁺) in 54% yield. The substitution reaction with 4,4′-bipyridyl is strongly accelerated by treatment with silver salt to give [14]²⁺ in 90% yield. The products derived from [2]⁺ and nucleophiles are unequivocally determined by elemental, spectroscopic, and X-ray diffraction analyses.     

Synthesis and properties of Zr-Co heterodinuclear complexes with a bridging bis(cyclopentadienyl) ligand

[(η⁵-C₅H₅)ZrCl₂(η⁵-C₅H₄)CMe₂(C₅H₅)] reacted with Co₂(CO)₈ to produce a heterodinuclear Zr(IV)-Co(I) complex [(η⁵-C₅H₅)ZrCl₂(η⁵-C₅H₄)CMe₂(η⁵-C₅H₄)Co(CO)₂] (3). Complex 3 underwent oxidative addition of I₂ to give [(η⁵-C₅H₅)ZrCl₂(η⁵-C₅H₄)CMe₂(η⁵-C₅H₄)CoI₂(CO)] (4) having Zr(IV) and Co(III) centers. The carbonyl ligand of 4 was easily replaced with P(OMe)₃ and PPh₃ to afford [(η⁵-C₅H₅)ZrCl₂(η⁵-C₅H₄)CMe₂(η⁵-C₅H₄)CoI₂(L)] (5: L = P(OMe)₃, 6: L = PPh₃). Structures of 5 and 6 were determined by X-ray crystallography. These Zr-Co heterodinuclear complexes catalyzed polymerization of ethylene and propylene.     

Trimetallic FePd2 and FePt2 4-ferrocenyl-NCN pincer complexes

Ferrocene-bridged NCN pincer complexes of structural type Fe(η⁵-C₅H₄-4-NCN-1-MX)₂ (X = I: 6, M = Pd; 7, M = Pt; X = Cl: 8, M = Pt; NCN = [4-C₆H₂(CH₂NMe₂)₂-2,6]⁻) are accessible by the subsequent reaction of Fe(η⁵-C₅H₄-4-NCNH)₂ (4) with ⁿBuLi and [PtCl₂(SEt₂)₂] (synthesis of 8) or treatment of Fe(η⁵-C₅H₄-4-NCN-1-I)₂ (5) with [Pd₂(dba)₃] (synthesis of 6) or [Pt(tol)₂(SEt₂)]₂ (synthesis of 7) (dba = dibenzylidene acetone, tol = 4-tolyl). In addition, the Sonogashira cross-coupling of Fe(η⁵-C₅H₄I)₂ (1) with HCC-4-NCNH (2) gives Fe(η⁵-C₅H₄-CC-4-NCNH)₂ (3). The reaction behavior of 3 towards ^tBuLi is reported as well.Cyclovoltammetric studies show that the ferrocene entity can be oxidized reversibly. The Fe(II)/Fe(III) potential decreases with increasing electron density at the NCN pincer units due to the presence of the M-halide moiety (M = Pd, Pt).The solid state structure of Fe(η⁵-C₅H₄-4-NCN-1-PdI)₂ (6) is presented. In 6 the Fe(η⁵-C₅H₄)₂ unit connects two NCN-PdI pincer entities with palladium in a square-planar environment. The cyclopentadienyl ligands show a staggered conformation. The C₆H₂ rings are tilted by 23.5(3)° towards the C₅H₄ entities and the C₆H₂ plane is almost coplanar with the coordination plane (10.3(3)°).     

Cyclopalladation of N-phenyl-4-ferrocenylmethylpyrazoles: Crystal structure of [Pd{κ-C,N-C6H4-1-[(3,5-Me2-C3N2)-CH2-(η-C5H4)Fe(η-C5H5)]}Cl(PPh3)] · CH2Cl2

The synthesis and characterization of pyrazole derivatives of general formula [C₆H₄-4-R-1-{(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)}] [R = OMe (1a) or H (1b)] with a ferrocenylmethyl substituent are described.The study of the reactivity of compounds 1 with palladium(II) acetate has allowed the isolation of complexes (μ-AcO)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (2) [R = OMe (2a) or H (2b)] that contain a bidentate [C(sp², phenyl), N]⁻ ligand and a central “Pd(μ-AcO)₂Pd” unit.Furthermore, treatment of 2 with LiCl produced complexes (μ-Cl)₂[Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}]₂ (3) [R = OMe (3a) or H (3b)] that arise from the replacement of the acetato ligands by the Cl⁻.Compounds 2 and 3 also react with PPh₃ giving the monomeric complexes [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}X(PPh₃)] {X⁻ = AcO⁻ and R = OMe (5a) or H (5b) or X⁻ = Cl⁻ and R = OMe (6a) or H (6b)}, where the phosphine is in a cis-arrangement to the metallated carbon atom. Treatment of 3 with thallium(I) acetylacetonate produced [Pd{κ²-C,N-C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}(acac)] (7) [R = OMe (7a) or H (7b)]. Electrochemical studies of the free ligands and the cyclopalladated complexes are also reported. The dimeric complexes 3 also react with MeO₂C-CC-CO₂Me (in a 1:4 molar ratio) giving [Pd{(MeO₂C-CC-CO₂Me)₂C₆H₃-4-R-1-[(3,5-Me₂-C₃N₂)-CH₂-(η⁵-C₅H₄)Fe(η⁵-C₅H₅)]}Cl] (8) [R = OMe (8a) or H (8b)], which arise from the bis(insertion) of the alkyne into the σ{Pd-C(sp², phenyl)} bond of 3.     

Alkynyl Ti-M complexes based on M(CO)4 and MO2 building blocks (M = Mo, W)

The synthesis and properties of heterobimetallic Ti-M complexes of type {[[Ti](μ-η¹:η²-CCSiMe₃)][M(μ-η¹:η²-CCSiMe₃)(CO)₄]} (M = Mo: 5, [Ti] = (η⁵-C₅H₅)₂Ti; 6, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti; M = W: 7, [Ti] = (η⁵-C₅H₅)₂Ti; 8, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) and {[Ti](μ-η¹:η²-CCSiMe₃)₂}MO₂ (M = Mo: 13, [Ti] = (η⁵-C₅H₅)₂Ti; 14, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti). M = W: 15, [Ti] = (η⁵-C₅H₅)₂Ti; 16, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) are reported. Compounds 5-8 were accessible by treatment of [Ti](CCSiMe₃)₂ (1, [Ti] = (η⁵-C₅H₅)₂Ti; 2, [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti) with [M(CO)₅(thf)] (3, M = Mo; 4, M = W) or [M(CO)₄(nbd)] (9, M = Mo; 10, M = W; nbd = bicyclo[2.2.1]hepta-2,5-diene), while 13-16 could be obtained either by the subsequent reaction of 1 and 2 with [M(CO)₃(MeCN)₃] (11, M = Mo; 12, M = W) and oxygen, or directly by oxidation of 5-8 with air. A mechanism for the formation of 5-8 is postulated based on the in-situ generation of [Ti](CCSiMe₃)((η²-CCSiMe₃)M(CO)₅), {[Ti](μ-η¹:η²-CCSiMe₃)₂}-M(CO)₄, and [Ti](μ-η¹:η²-CCSiMe₃)((μ-CCSiMe₃)M(CO)₄) as a result of the chelating effect exerted by the bis(alkynyl) titanocene fragment and the steric constraints imposed by the M(CO)₄ entity.The molecular structure of 5 in the solid state were determined by single crystal X-ray diffraction analysis. In doubly alkynyl-bridged 5 the alkynides are bridging the metals Ti and Mo as a σ-donor to one metal and as a π-donor to the other with the [Ti](CCSiMe₃)₂Mo core being planar.     

Formation of ferraboranes from pentaborane(9) or BH3 · thf and an electron-rich cyclopentadienyl iron phosphine hydride

[(η⁵-C₅R₅)Fe(PMe₃)₂H] (R = H, Me) can be made in good yields in a simple one-pot reaction between FeCl₂, PMe₃, C₅R₅H (R = H, Me) and Na/Hg in thf. Reaction of [(η⁵-C₅H₅)Fe(PMe₃)₂H] with pentaborane(9) gives the known metallaborane [(η⁵-C₅H₅)-nido-2-FeB₅H₁₀] (1) in improved yield as well as the new metallaboranes [(η-C₅H₅)-nido-2-FeB₅H₈{μ-5,6-Fe(η⁵-C₅H₅)(PMe₃)(μ-6,7-H)}] (2), [(η-C₅H₅)(PMe₃)-arachno-2-FeB₃H₈] (3), [(η⁵-C₅H₅)₂-capped-nido-2,3-Fe₂B₄H₈] (4), [(η⁵-C₅H₅)-nido-2-FeB₄H₇(PMe₃)] (5) and [(η⁵-C₅H₅)-nido-2-FeB₅H₈(PMe₃)] (6). Reaction of [(η⁵-C₅Me₅)Fe(PMe₃)₂H] with pentaborane(9) gives predominantly [(η⁵-C₅Me₅)-nido-2-FeB₅H₁₀] (7) and [(η⁵-C₅Me₅)(PMe₃)-arachno-2-FeB₃H₈] (8). Reaction of [(η⁵-C₅H₅)Fe(PMe₃)₂H] with 2 equiv. of BH₃ · thf gives low yields of ferrocene and compound 3. Compound 7 thermally isomerises to the apical isomer [(η⁵-C₅H₅)-nido-2-FeB₅H₁₀] (9) in low yield. Compounds 1 and 7 deprotonate cleanly in the presence of KH at the unique B-H-B bridge to give [(η⁵-C₅H₅)-nido-2-FeB₅H₉⁻][K⁺] (10) and [(η⁵-C₅Me₅)-nido-2-FeB₅H₉⁻][K⁺] (11) respectively, whilst 6 deprotonates more slowly at one of two equivalent B-H-B bridges to give the fluxional anion [(η⁵-C₅H₅)-nido-2-FeB₅H₇(PMe₃)⁻] (12).     

Synthesis and reactivity of homo-bimetallic Rh and Ir complexes containing a N,O-donor Schiff base

Binuclear complexes [{(η⁵-C₅Me₅)RhCl}₂(μ-bsh)] (1) and [{(η⁵-C₅Me₅)IrCl}₂(μ-bsh)] (2) containing N,N′-bis(salicylidine)hydrazine (H₂bsh) are reported. The complexes 1 and 2 reacted with EPh₃ (E = P, As) to afford cationic complexes [(η⁵-C₅Me₅)Rh(PPh₃)(κ²-Hbsh)]PF₆ (3), [(η⁵-C₅Me₅)Rh(AsPh₃)(κ²-Hbsh)]PF₆ (4), [(η⁵-C₅Me₅)Ir(PPh₃)(κ²-Hbsh)]PF₆ (5), and [(η⁵-C₅Me₅)Ir(AsPh₃)(κ²-Hbsh)]PF₆ (6) which were isolated as their hexafluorophosphate salts. Representative complexes 3 and 5 have been used as a metallo-ligand in the synthesis of binuclear complexes [(η⁵-C₅Me₅)RhCl(μ-bsh)Ru(η⁶-C₁₀H₁₄)Cl]PF₆ (7) and [(η⁵-C₅Me₅)IrCl(μ-bsh)Ru(η⁶-C₁₀H₁₄)Cl]PF₆ (8). The complexes under study have been fully characterized by analytical and spectral (FAB/ESI-MS, IR, NMR, electronic and emission) studies. Molecular structures of 1, 2, 3 and 5 have been determined crystallographically. Structural studies on 1 and 2 revealed the presence of extensive inter- and intra-molecular C-H···O and C-H···π weak bonding interactions. The complexes 1, 2, 3 and 5 moderately emit upon excitation at their respective MLCT bands.     

Reactions of benzothiazolide triosmium clusters with tetramethylthiourea

The valence saturated benzothiazolide triosmium cluster [Os₃(CO)₁₀(μ-η²-C₇H₄NS)(μ-H)] (1) reacts with tetramethylthiourea in refluxing toluene to give [Os₃(CO)₈(μ-η²-C₇H₄NS)(η²-SCNMe₂NMeCH₂)(μ-H)₂] (5), which exists as a mixture of two isomers in solution, whereas the electron-deficient cluster [Os₃(CO)₉(μ₃-η²-C₇H₄NS)(μ-H)] (2) reacts with tetramethylthiourea in refluxing cyclohexane to give two new compounds [Os₃(CO)₈(μ-η²-C₇H₄NS)(η²-SCNMe₂NMeCH₂)(μ-H)₂] (6) and [Os₃(CO)₉(μ-η²-C₇H₄NS)(η¹-SC(NMe₂)₂)(μ-H)] (7). In contrast, the reaction of [Os₃(CO)₉(μ₃-η²-C₇H₃(2-CH₃)NS)(μ-H)](3) with tetramethylthiourea in refluxing cyclohexane at 81 °C, gives only [Os₃(CO)₉(μ-η²-C₇H₃(2-CH₃)NS)(η¹-SC(NMe₂)₂)(μ-H)] (8) in 15% yield. Compound 7 converts into 6 in refluxing toluene whereas a similar thermolysis of 8 results non-specific decomposition. All the compounds have been characterized by elemental analysis, IR, ¹H NMR and mass spectroscopic data together with single crystal X-ray diffraction analysis for 5 and 7. Both compounds 5 and 6 contain a cyclometallated tetramethylthiourea ligand which is chelating at the rear osmium atom and are structurally very similar. In 5, the benzothiazolide ligand is coordinated to Os₃ triangle via the nitrogen lone pair and C(2) carbon atom of the heterocyclic ring whereas in 6 the ligand is coordinated to the Os₃ triangle via the nitrogen lone pair and the C(7) carbon atom of carbocyclic ring. In 7 and 8, the tetramethylthiourea ligand is coordinated at an equatorial site of the osmium atom which is also bound to the nitrogen atom of the benzothiazolide ligand.     

Syntheses and characterization of mono and dinuclear complexes of platinum group metals bearing benzene-linked bis(pyrazolyl)methane ligands

Reaction of the benzene-linked bis(pyrazolyl)methane ligands, 1,4-bis{bis(pyrazolyl)-methyl}benzene (L1) and 1,4-bis{bis(3-methylpyrazolyl)methyl}benzene (L2), with pentamethylcyclopentadienyl rhodium and iridium complexes [(η⁵-C₅Me₅)M(μ-Cl)Cl]₂ (M = Rh and Ir) in the presence of NH₄PF₆ results under stoichiometric control in both, mono and dinuclear complexes, [(η⁵-C₅Me₅)RhCl(L)]⁺ {L = L1 (1); L2 (2)}, [(η⁵-C₅Me₅)IrCl(L)]⁺ {L = L1 (3); L2 (4)} and [{(η⁵-C₅Me₅)RhCl}₂(μ-L)]²⁺ {L = L1 (5); L2 (6)}, [{(η⁵-C₅Me₅)IrCl}₂(μ-L)]²⁺ {L = L1 (7); L2 (8)}. In contrast, reaction of arene ruthenium complexes [(η⁶­arene)Ru(μ-Cl)Cl]₂ (arene = C₆H₆, p-ⁱPrC₆H₄Me and C₆Me₆) with the same ligands (L1 or L2) gives only the dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(μ-L)]²⁺ {L = L1 (9); L2 (10)}, [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(μ-L)]²⁺ {L = L1 (11); L2 (12)} and [{(η⁶-C₆Me₆)RuCl}₂(μ-L)]²⁺ {L = L1 (13); L2 (14)}. All complexes were isolated as their hexafluorophosphate salts. The single-crystal X-ray crystal structure analyses of [7](PF₆)₂, [9](PF₆)₂ and [11](PF₆)₂ reveal a typical piano-stool geometry around the metal centers with six-membered metallo-cycle in which the 1,4-bis{bis(pyrazolyl)-methyl}benzene acts as a bis-bidentate chelating ligand.     

Synthesis and properties of new Mo(II) complexes with N-heterocyclic and ferrocenyl ligands

New Mo(II) complexes with 2,2′-dipyridylamine (L1), [Mo(CH₃CN)(η³-C₃H₅)(CO)₂(L1)]OTf (C1a) and [{MoBr(η³-C₃H₅)(CO)₂(L1)}₂(4,4′-bipy)](PF₆)₂ (C1b), with {[bis(2-pyridyl)amino]carbonyl}ferrocene (L2), [MoBr(η³-C₃H₅)(CO)₂(L2)] (C2), and with the new ligand N,N-bis(ferrocenecarbonyl)-2-aminopyridine (L3), [MoBr(η³-C₃H₅)(CO)₂(L3)] (C3), were prepared and characterized by FTIR and ¹H and ¹³C NMR spectroscopy. C1a, C1b, L3, and C2 were also structurally characterized by single crystal X-ray diffraction. The Mo(II) coordination sphere in all complexes features the facial arrangement of allyl and carbonyl ligands, with the axial isomer present in C1a and C2, and the equatorial in the binuclear C1b. In both C1a and C1b complexes, the L1 ligand is bonded to Mo(II) through the nitrogen atoms and the NH group is involved in hydrogen bonds. The X-ray single crystal structure of C2 shows that L2 is coordinated in a κ²-N,N-bidentate chelating fashion. Complex C3 was characterized as [MoBr(η³-C₃H₅)(CO)₂(L3)] with L3 acting as a κ²-N,O-bidentate ligand, based on the spectroscopic data, complemented by DFT calculations.The electrochemical behavior of the monoferrocenyl and diferrocenyl ligands L2 and L3 has been studied together with that of their Mo(II) complexes C2 and C3. As much as possible, the nature of the different redox changes has been confirmed by spectrophotometric measurements. The nature of the frontier orbitals, namely the localization of the HOMO in Mo for both in C2 and C3, was determined by DFT studies.     

Sulfur and oxygen functionalized cyclopentadienyl half-sandwich cobalt complexes with 1,2-dicarba-closo-dodecaborane-1,2-dichalcogenolato ligands

Sulfur and oxygen functionalized cyclopentandienyl half-sandwich cobalt dicarbonyl complexes [η⁵-C₅H₄(CH₂)₂SCH₂CH₃]Co(CO)₂ (3) and [η⁵-C₅H₄(CH₂)₂OCH₃]Co(CO)₂ (7) were prepared. Oxidation of 3 or 7 with I₂ led to formation of 18-electron complexes [η⁵-C₅H₄(CH₂)₂SCH₂CH₃]CoI₂ (4) and [η⁵-C₅H₄(CH₂)₂OCH₃]Co(CO)I₂ (8). The reactions of diiodide complex (4) with dilithium 1,2-dicarba-closo-dodecaborane(12)-1,2-dichalcogenolates [(THF)₃LiE₂C₂B₁₀H₁₀Li(THF)]₂ [E=S (1a), Se (1b)] afforded 18-electron mononuclear complexes [η⁵-C₅H₄(CH₂)₂SCH₂CH₃]Co(E₂C₂B₁₀H₁₀) [E=S (5a), Se (5b)] in which sulfur atoms of side-chain were attached via an intramolecular coordination. Complex 7 reacted with 1a and 1b to give the binuclear complexes {[η⁵-C₅H₄(CH₂)₂OCH₃]Co(E₂C₂B₁₀H₁₀)}₂ [E=S (10a), Se (10b)]. The molecular structures of 5a and 10b were determined by X-ray crystallographic analysis. According to the X-ray structure analyses, 10b contains two o-carborane diselenolate bridges, and each Cp^′Co fragment is attached to one terminal and two bridging selenolato ligands. The central Co₂Se₂ four-membered ring is planar, and the direct metal-metal interaction is absent.     

A synthetic, structural and reactivity study of [(η-C4R4)Co(η-C5H4X)] complexes, R = Me or Et; X = CHO, CHCHFc, CHCH(η-C5H4)Co(η-C4Ph4), CHC(CN)2: Unexpected formation of [(η-cyclopentadienyl)(η-3,4,5,6-tetraethyl-α-pyrone)cobalt]

The tetraethyl- and tetramethyl-cyclobutadiene complexes [(η⁴-C₄R₄)Co(η⁵-C₅H₄CHO)] R = Et, 5, R = Me, 7, and [(η⁴-C₄R₄)Co(η⁵-C₅H₄CO₂Me)] R = Et, 6, R = Me, 8, are conveniently prepared by photolysis of the corresponding isocobaltocenium cations [(η⁴-C₄R₄)Co(η⁶-C₆H₅Me)]⁺ in acetonitrile, and subsequent treatment with Na[C₅H₄CHO] or Na[C₅H₄CO₂Me]. The aldehydes 5 and 7 undergo Wittig and Knoevenagel reactions with [FcCH₂PPh₃]I and CH₂(CN)₂, to form [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH=CHFc)] and [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH=C(CN)₂], 11 and 15, respectively. The Horner-Wittig reaction of [(η⁴-C₄R₄)Co(η⁵-C₅H₄CH₂P(O)(OEt)₂] with [(η⁴-C₄Ph₄)Co(η⁵-C₅H₄CHO)] yields [(η⁴-C₄R₄)Co(η⁵:η⁵-C₅H₄CHCH-C₅H₄)Co(η⁴-C₄Ph₄)], 12 and 13. [(η⁴-C₄Me₄)Co(η⁵-C₅H₄CHO)] also reacts with t-BuLi and FcLi to furnish the corresponding secondary alcohols, 16 and 17, respectively. Surprisingly, the attempted direct synthesis of 5 by reaction of Na[C₅H₅] and ethyl formate with [(η⁴-C₄Et₄)Co(CO)₂I], 1, instead yielded [(η⁵-C₅H₅)Co(η⁴-3,4,5,6-tetraethyl-α-pyrone)], 18, and a mechanistic proposal is advanced. The X-ray crystal structures of 1, 7, 8, 11(Z), 15 and 18, and also the isocobaltocenium salts [(η⁴-C₄Et₄)Co(η⁶-C₆H₅Me)][PF₆], 2, and [(η⁴-C₄Et₄)Co(η⁶-1,3,5-C₆H₃Me₃)][PF₆], 4, are reported.     

Trimethylsilyl-functionalised bis(indenyl)iron(II) complexes: solid-state structure of [η-1,3-(SiMe3)2C9H5]2Fe

The synthesis of the bis(η⁵-indenyl)iron sandwich complexes (η⁵-1-SiMe₃-C₉H₆)₂Fe (3a), (η⁵-2-SiMe₃-C₉H₆)₂Fe (3b), [η⁵-1,2-(SiMe₃)₂C₉H₅]₂Fe (4a) and [η⁵-1,3-(SiMe₃)₂C₉H₅]₂Fe (4b), by the reaction of the appropriate lithium indenide salts [prepared from 1-SiMe₃-C₉H₇ (2a), 2-SiMe₃-C₉H₇ (2b), 1,2-(SiMe₃)₂C₉H₆ (2c) or 1,3-(SiMe₃)₂C₉H₆ (2d)] with ferrous chloride (1) in a 2:1 molar ratio is discussed. The solid-state structure of 4b was determined by single-crystal X-ray diffractometry. Complex 4b exists in a gauche conformation, showing that the indenyl ligands are sterically imposed by the bulk of the Me₃Si substituents. The average Fe-C distance is 2.091(3) Å. Cyclovoltammetric studies indicate that 3 and 4 are redox-active with one-electron oxidations [E^1/2=−270 to −360 mV versus Fc/Fc⁺, Fc=(η⁵-C₅H₅)₂Fe].     

Mono and dinuclear rhodium, iridium and ruthenium complexes containing chelating 2,2′-bipyrimidine ligands: Synthesis, molecular structure, electrochemistry and catalytic properties

The mononuclear cations [(η⁵-C₅Me₅)RhCl(bpym)]⁺ (1), [(η⁵-C₅Me₅)IrCl(bpym)]⁺ (2), [(η⁶-p-PrⁱC₆H₄Me)RuCl(bpym)]⁺ (3) and [(η⁶-C₆Me₆)RuCl(bpym)]⁺ (4) as well as the dinuclear dications [{(η⁵-C₅Me₅)RhCl}₂(bpym)]²⁺ (5), [{(η⁵-C₅Me₅)IrCl}₂(bpym)]²⁺ (6), [{(η⁶-p-PrⁱC₆H₄Me)RuCl}₂(bpym)]²⁺ (7) and [{(η⁶-C₆Me₆)RuCl}₂(bpym)]²⁺ (8) have been synthesised from 2,2′-bipyrimidine (bpym) and the corresponding chloro complexes [(η⁵-C₅Me₅)RhCl₂]₂, [(η⁵-C₅Me₅)IrCl₂]₂, [(η⁶-PrⁱC₆H₄Me)RuCl₂]₂ and [(η⁶-C₆Me₆)RuCl₂]₂, respectively. The X-ray crystal structure analyses of [3][PF₆], [5][PF₆]₂, [6][CF₃SO₃]₂ and [7][PF₆]₂ reveal a typical piano-stool geometry around the metal centres; in the dinuclear complexes the chloro ligands attached to the two metal centres are found to be, with respect to each other, cis oriented for 5 and 6 but trans for 7. The electrochemical behaviour of 1-8 has been studied by voltammetric methods. In addition, the catalytic potential of 1-8 for transfer hydrogenation reactions in aqueous solution has been evaluated: All complexes catalyse the reaction of acetophenone with formic acid to give phenylethanol and carbon dioxide. For both the mononuclear and dinuclear series the best results were obtained (50 °C, pH 4) with rhodium complexes, giving turnover frequencies of 10.5 h⁻¹ for 1 and 19 h⁻¹ for 5.