Influence of crosslinker and ionic comonomer concentration on glass transition and demixing/mixing transition of copolymers poly(N-isopropylacrylamide) and poly(sodium acrylate) hydrogels

Hydrogels based on N-isopropylacrylamide and sodium acrylate as ionic comonomer were synthesized by free radical polymerization in water using N,N′-methylenebisacrylamide as crosslinker and ammonium persulfate as initiator. The glass transition of dried copolymers poly(N-isopropylacrylamide) (PNIPA) and poly(sodium acrylate) (SA) gels and demixing/mixing transition of PNIPA-SA hydrogels swollen with increasing amounts of water were studied using conventional differential scanning calorimetry. In the crosslinked polymers, the glass transition linearly increases, and the transition range becomes broader, with increasing crosslinker content. Increasing content of ionic comonomer also produces an increase of glass transition temperature, which moves to higher temperatures with higher sodium acrylate fraction. The influence of chemical structure of PNIPA-SA hydrogels on the lower critical solution temperature (LCST) of PNIPA-SA/water mixtures during heating and cooling was quantified as function of the content of the crosslinker and the ionic comonomer, as well as water content of the hydrogel in the range from 95 to 70 wt%. At parity of water content, the LCST occurs at higher temperatures for gels containing higher amounts of sodium acrylate. Similarly, the introduction of N,N′-methylenebisacrylamide causes an increase of the LCST, which grows with increasing of crosslinking degree of the hydrogel.     

Synthesis and functionalities of poly(N-vinylalkylamide). VI. A novel thermosensitive hydrogel crosslinked poly(N-vinylisobutyramide)

A novel thermosensitive poly(N-vinylisobutyramide)(polyNVIBA) hydrogel was prepared by the copolymerization of N-vinylisobutyramide (NVIBA) with butylene-bis-NVA(B-BNVA) as a crosslinker in a high yield. The swelling transition behavior was examined in comparison with poly(N-isopropylacrylamide)(polyNIPAAm) hydrogel. The resulting polyNVIBA hydrogel clearly showed a swelling transion in water at ca. 41°C. To control the transition temperature (T_t) of the gel, crosslinked copolymers of NVIBA and N-vinylacetamide (NVA) were prepared and compared with copolymers of N-isopropylacrylamide(NIPAAm) and NVA. The incorporation of NVA led to a higher swelling transition temperature. T_t of poly(NVIBA-co-NVA) gels was almost the same as those in water-soluble poly(NVIBA-co-NVA). The responses for a swelling transition of polyNVIBA and poly(NVIBA-co-NVA) gels were sharp in comparison to polyNIPAAm gels. PolyNVIBA and poly(NVIBA-co-NVA) gels desorbed 98% of water above T_t. The characteristic and the mechanism of the phase transition on the hydrogels were discussed. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3377–3384, 1997     

Studies on copolymerization of N-isopropylacrylamide with poly(ethylene glycol) methacrylate

The paper describes the preparation and characterization of cross-linked homopolymers and copolymers of N-isopropyl acrylamide (NIPAAm) with poly(ethylene glycol) methacrylate (PEGMA, M_n = 526 g/mol). Several copolymer samples were prepared by taking varying amounts of monomers i.e. NIPAAm and PEGMA in the initial feed using hydrophilic (IRGACURE-2959) and hydrophobic (DURACURE-1173) photoinitiator. In order to investigate the effect of reaction conditions, copolymers were prepared below or above the lower critical solution temperature (LCST) using water or water:ethanol (50:50) as solvent and by varying the amounts of cross-linker. Hydrogels prepared under varying reaction conditions were characterized for its swelling behaviour (using optical microscope), phase transition temperature (using DSC) and morphology (using SEM). As expected LCST increased from 35 to 39 °C as PEGMA content in copolymers increased from 1 to 20% (w/w). However, the morphology of hydrogels was found to be independent on the reaction conditions.Copolymer films having an optimum combination of swelling and performance properties were evaluated as switchable cell culture membranes. Hepatic cancer cell lines (Hep G-2) was used to study the cell growth and detachment. Cell growth and detachment were found to be dependent on the copolymer composition. Cell viability was found comparable to trypsin which also supports application of these films as cell culture membrane.     

ATRP synthesis and association properties of temperature responsive dextran copolymers grafted with poly(N-isopropylacrylamide)

Temperature responsive copolymers of dextran grafted with poly(N-isopropylacrylamide) (Dex-g-PNIPAAM) were prepared by atom transfer radical polymerization (ATRP) in homogeneous mild conditions without using protecting group chemistry. Dextran macroinitiator was synthesized by reaction of dextran with 2-chloropropionyl chloride at room temperature in DMF containing 2% LiCl. ATRP was carried out in DMF:water 50:50 (v/v) mixtures at room temperature with CuBr/Tris(2-dimethylaminoethyl)amine (Me₆TREN) as catalyst. Several grafted copolymers with well defined number and length of low polydispersity grafted chains were prepared. Temperature induced association properties in aqueous solution were studied as a function of temperature and polymer concentration by dynamic light scattering, fluorescence spectroscopy and atomic force microscopy (AFM). LCST, ranging from 35 to 41 °C, was significantly affected by number and length of grafted chains. The fine tuning of LCST around body temperature is an important characteristic not obtainable by conventional radical grafting of PNIPAAM. Well defined spherical nanoparticles were formed above the LCST of PNIPAAM. Hydrodynamic diameter was in the range 73-98 nm.     

Preparation of fast response superabsorbent hydrogels by radiation polymerization and crosslinking of N-isopropylacrylamide in solution

Macroporous temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogels with high equilibrium swelling and fast response rates were obtained by a ⁶⁰Co γ- and electron beam (EB) irradiation of aqueous N-isopropylacrylamide (NIPAAm) monomer solutions. The effect of irradiation temperatures, the dose, the addition of a pore-forming agent on the swelling ratio, and the kinetics of swelling and shrinking of the PNIPAAm gels was studied. The gels synthesized above the LCST exhibited the highest equilibrium swelling (300–400) and fastest response rate measured by minutes. Scanning electron microscope (SEM) pictures revealed that the gels synthesized above the LCST have larger pores than those prepared at temperatures below the LCST. The gels showed a reversible response to cyclical changes in temperature and might be used in a pulsed drug delivery device. The gels synthesized above the LCST exhibited the highest testosterone propionate release.     

Fast responsive poly(<Emphasis Type="Italic">N,N</Emphasis>-diethylacrylamide) hydrogels with interconnected microspheres and bi-continuous structures

We prepared thermo-responsive polymer hydrogels by γ-ray irradiation of aqueous solutions of N, N-diethylacrylamide at different temperatures below and above its lower critical solution temperature (LCST). Poly(N, N-diethylacrylamide) gel had a transparent and homogeneous structure when the radiation-induced polymerization and crosslinking were carried out below the LCST (25 °C) of the polymer. On the other hand, cloudy and heterogeneous gels were formed at temperatures above the LCST of the polymer (>35 °C). From environmental scanning electron microscopy observations, the gels prepared at 35 and 40 °C were seen to show sponge-like bi-continuous porous structures, while those prepared at 50 °C showed a porous structure consisting of interconnected microspheres. For temperature changes between 10 and 40 °C, gels with porous structures showed rapid volume transitions on a time scale of about a minute, not only for shrinking but also for swelling processes, which is in remarkable contrast to the porous poly(N-isopropylacrylamide) hydrogels.     

Synthesis and swelling behavior of thermosensitive hydrogels based on N-substituted acrylamides and sodium acrylate

A series of hydrogels based on N-isopropylacrylamide, sodium acrylate, and N-tert-butylacrylamide were synthesized by free radical polymerization in a mixture of dioxane and water with tetra(ethylene glycol) diacrylate as the crosslinker and benzoyl peroxide as the initiator. The swelling behavior including the swelling rate of the crosslinked gels in water was studied with gravimetric method. The swelling ratio of the gel (0.1 mol% crosslinking) can reach 420 g/g at 20 °C and such a gel can release 96% of the water absorbed at 40 °C. The lower critical swelling temperature (LCST) of the copolymers can be adjusted by changing the chemical composition of the polymers. Such crosslinked gels can be potentially used as thermosensitive superabsorbent because of their high water uptake and thermal sensitivity.     

Random copolymers of N-isopropylacrylamide and methacrylic acid monomers with hydrophobic spacers: pH-tunable temperature sensitive materials

Two series of random copolymers of N-isopropylacrylamide (NIPAAm) and comonomers derived from methacrylic acid with a different number of methylene units as hydrophobic spacers (n=4, 7 and 10) were synthesized via free radicals. The first series was prepared having the acid groups methoxy-protected while the second series have the acid groups free. The NIPAAm-copolymers of both series were prepared varying the comonomer content from 5 to 20 mol%. All the copolymers were characterized by FTIR, DSC, ¹H NMR and SLS. The aqueous solution behaviour of the copolymers having methoxy-protected acid groups shows that the comonomer increases the hydrophobicity of the copolymer chain and decreases its lower critical solution temperature (LCST). For the copolymers having free acid groups, hydrogen-bonding is responsible for a further decrease in the LCST of these copolymers in pure water. In buffer solutions, every acid comonomer have a critical ionization degree (α_crit) above which the LCST increases with increasing comonomer content while at an ionization degree lower than α_crit the LCST decreases with increasing comonomer content. In dependence of comonomer content, number of methylene units in the spacer and the pH of the buffer solution, the LCST of the copolymers can be varied widely, showing that these random copolymers have pH-tunable temperature sensitivity.     

DNA mutation analysis based on capillary electrochromatography using colloidal poly(N-isopropylacrylamide) particles as pseudostationary phase

Poly(N-isopropylacrylamide) (PNIPAM) is an interesting class of temperature sensitive, water soluble polymer that has a lower critical solution temperature (LCST) of 32 °C. Above the LCST, PNIPAM gets phase-separated and precipitates out from water. The fascinating temperature-sensitive property of PNIPAM has led to a growing interest in diverse fields of applications. Recently, capillary electrochromatography (CEC) has gained attention due to the wide range of applications based on the use of open tubular capillaries. In this paper, the use of phase-separated PNIPAM as a pseudostationary phase for CEC is demonstrated for the detection of single nucleotide polymorphisms (SNPs). Owing to the dynamic coating, the phase-separated PNIPAM particles did not require any immobilization technique and could exist as a mobile stationary phase in the open tubular capillary. The heteroduplex analyses of mutation samples could be successfully performed based on the phase-separated PNIPAM particles in the constructed CEC system. The CEC system, based on PNIPAM particles capable of having a narrow size distribution, shows great potential as an alternative to conventional DNA mutation systems.     

Microphase separation of cationic poly(N-isopropylacrylamide) copolymers in water: Effect of the migration of charges

The structures of aqueous copolymer solutions have been examined through small angle neutron scattering. The copolymers contained mostly N-isopropylacrylamide (NIPAM) monomers. Poly (NIPAM) solutions have a lower critical solution temperature (LCST), above which the macromolecules separate from water. A small fraction of ionizable N,N-[(dimethylamino) propyl] methacrylamide (MADAP) monomers was introduced into the macromolecules. This had dramatic consequences on the solution behavior at temperatures above the LCST of PNIPAM, where phase separation would have been expected for the homopolymer. When all MADAP monomers were ionized, it was found that the solutions resisted the phase separation. At short spatial scales, the chains were collapsed but at large scales they formed branched aggregates that did not separate out of water. When only half of the MADAP monomers are ionized, the electrical charges were able to redistribute themselves along the chains. In this case, the rise in temperature caused a microphase separation where the electrical charges were relocated on a fraction of the chains that remained in solution.The other chains (or section of chains) formed large nodules of a polymer rich phase.     

Lower critical solution temperature control and swelling behaviour of physically crosslinked thermosensitive copolymers based on N-isopropylacrylamide

In this contribution we have developed thermosensitive polymer matrices based on N-isopropylacrylamide (NIPAAm). Preparation of the hydrogels involved photopolymerisation of a combination of NIPAAm, 1-vinyl-2-pyrrolidinone (NVP) and distilled water, in appropriate amounts and contained a UV-light sensitive initiator called 1-hydroxycyclohexylphenylketone. As NIPAAm monomer could be readily dissolved in mixtures of liquid NVP and distilled water, the use of organic solvents was not required in the polymerisation process. Furthermore, chemical crosslinking agents are not needed in the synthesis. By alternating the feed ratio, hydrogels were synthesised to have lower critical solution temperatures (LCST) in the vicinity of 37 °C. This ability to shift the phase transition temperature of the gels provides excellent flexibility in tailoring transitions for specific uses. The transition temperature of the pseudo gels was established using cloud point measurement and modulated differential scanning calorimetry (MDSC). The chemical structure of the xerogels was characterised by means of Fourier transform infrared spectroscopy (Ftir), while swelling experiments in distilled water indicate that the swelling and dissolution behaviour of the gels is strongly temperature dependent.     

Phase transition of aqueous solutions of poly(N,N-diethylacrylamide-co-acrylic acid) by differential scanning calorimetric and spectrophotometric methods

 The phase transition of aqueous solutions of poly(N,N-diethylacrylamide-co-acrylic acid) (DEAAm–AA) is studied by differential scanning calorimetry (DSC) and UV–vis spectrophotometry. The copolymer aqueous solutions are shown to have well-defined lower critical solution temperatures (LCSTs). The LCST values obtained from the maximum of the first derivatives of the DSC and optical transition curves agree well. DSC can be used to measure the phase-transition temperature of more dilute polymer solutions. On increasing the AA composition in the copolymers, the LCST values of the copolymer increase, then decrease at higher AA composition. For the aqueous solution of the copolymers, the transition curve obtained by the spectrophotometric method is highly wavelength dependent. The LCST values are found to be concentration-dependent. The changes in the heat of the phase transition of the copolymer solutions measured from DSC are lower than that of the homopolymer PDEAAm solution. This is consistent with the suggestion that the polymer chains of the copolymers collapsed only partially at temperatures above the LCST. The added salt (sodium chloride) decreases the transition temperature of the polymer solution. Received: 14 November 2000 Accepted: 15 January 2001     

Synthesis and characterization of thermosensitive copolymers for oral controlled drug delivery

Poly(N-isopropylacrylamide) (PNIPAAm) copolymers were synthesized in order to obtain co-polymers with a phase transition temperature slightly higher than the physiological temperature, as required by a new drug delivery concept described in a previous paper. Six hydrophilic comonomers bringing about a rise of the phase transition temperature were evaluated. The synthesized copolymers were characterized and the influence of the type and of the amount of the used comonomer on the phase transition temperature was discussed. Among the comonomers, Acrylamide (AAm), N-methyl-N-vinylacetamide (MVA), N-vinylacetamide (NVA), and N-vinyl-2-pyrrolidinone (VPL) were found to be capable to raise the phase transition temperature to a value slightly higher than 37 °C and to have adequate phase transition behavior. The selected four copolymers were subjected to an additional purification step that should make them fit to use as a controlling agent in drug delivery systems.     

Thermo-responsive block copolymers based on linear-type poly(ethylene glycol): Tunable LCST within the physiological range

Thermo-responsive block copolymers poly（ethylene glycol）-block-poly（N-acryloyl-2,2-dimethyl-1,3-oxazolidine）, PEG-b-PADMO,based on linear PEG were prepared via a versatile reversible addition-fragmentation chain transfer（RAFT） polymerization.PEG₂₂（M_w = 1000） was used as the hydrophilic component,whose dehydration was the main driving force for the phase transition of these copolymers,as demonstrated by the ¹H-NMR spectra.Their lower critical solution temperatures（LCSTs） could be tuned in the range of 20℃to 35℃,by adjusting the degree of polymerization（DP） of PADMO between 14-27.Furthermore,a sharp phase transition at ca.33℃,close to the physiological temperature with minimal hysteresis,was observed for the PEG₂₂-b-PADMO₁₄ copolymer.Moreover,excellent reversibility and reproducibility were displayed for the same copolymer over 10 cycles of repeated temperature change between 25℃（below the LCST） and 40℃（above the LCST）.     

Effect of urea on the conformational behavior of poly(N-isopropylacrylamide)

The effect of urea on the conformational behavior of poly(N-isopropylacrylamide) (PNIPAM) in dilute aqueous solution has been investigated using fluorescence spectroscopy, fluorescence quenching and fluorescence anisotropy measurements via pyrene (Py) probe and acenaphthylene (ACE) label studies. It was demonstrated that urea promotes the partitioning of the hydrophobic probe, Py, towards the bulk aqueous phase at temperatures above the lower critical solution temperature (LCST) of the polymer due to swelling of the compact coil conformation. However, the compact coil structure of the polymer at temperatures greater than its LCST is not completely destroyed, even for urea concentrations up to 3 M, at which the phase transition is hardly observed. As expected, urea has little effect on the conformational behavior of PNIPAM at temperatures below its LCST. Received: 9 February 2000/Accepted: 13 June 2000     

Poly(N-isopropylacrylamide) thermoresponsive cross-linked conjugates containing polymeric soybean oil and/or polypropylene glycol

Synthesis, characterization and solution properties of a new series of the PNIPAM-soybean oil and/or polypropylene glycol, PPG, conjugates (conjugates also referred to as co-networks) have been described. For this purpose free radical polymerization of NIPAM monomer was initiated by macroinitiators based on PSB and/or PPG in order to obtain PSB-g-PNIPAM, PPG-g-PNIPAM and PSB-g-PPG-g-PNIPAM cross-linked graft copolymers. The autooxidation of soybean oil under air at room temperature rendered waxy soluble polymeric soybean oil peroxide associated with cross-linked parts. The soluble polymeric oil macro-peroxide isolated from the cross-linked part was used to initiate the free radical polymerization of NIPAM to give PSB-g-PNIPAM cross-linked copolymer. To obtain PPG-macromonomeric initiator, PPG-MIM, PPG-bis amino propyl ether with Mn 400 (or 2000) Dalton was reacted with 4,4′-azo bis cyanopentanoyl chloride and methacryloyl chloride, respectively. PPG-MIM also initiated the free radical polymerization of NIPAM at 80 °C to yield PPG-g-PNIPAM cross-linked thermoresponsive product. In order to obtain PSB-g-PPG-g-PNIPAM cross-linked triblock copolymer, NIPAM was polymerized by using the mixture of two macroinitiators, PSB and PPG-MIM. PSB contents in the graft copolymers were calculated via elemental analysis of nitrogen in graft copolymers. Thermal analysis, SEM, FTIR and ¹H NMR techniques were used in the characterization of the products. The effect of polymeric soybean oil, PSB, and/or PPG on the thermal response rate of poly(N-isopropylacrylamide, PNIPAM, cross-linked-graft copolymers swollen in water has been investigated by means of swelling-deswelling and drug release behaviors against to temperature change. Lower critical solution temperatures (LCST) of the cross-linked PNIPAM conjugates (conjugates also referred to as co-networks) were determined from the curves of swelling degrees versus solution temperatures. The response temperature of the hydrophobically modified PNIPAM conjugates was reduced to 27 °C, 23 °C and 27 °C for PSB-g-PNIPAM, PPG-g-PNIPAM and PSB-g-PPG-g-PNIPAM, respectively. We have found that the graft copolymers were not pH-responsive. In addition, higher pH ranges cause the hydrolysis of the PSB ester linkages, quickly and makes the cross-linked graft copolymers soluble.The fastest shrinking of the gels was observed by loosing water between 65% and 98% at 50 °C.Methyl orange (MO), was used as a model drug, loaded into cross-linked graft copolymers to examine and compare the effects of controlled release at lower and higher temperatures of lower critical solution temperature (LCST).     

The use of hydrophobic spacers in the development of new temperature- and pH-sensitive polymers

The preparation and characterization of two series of methacrylic acid derivative polymers is described. One series contains aliphatic spacers with one to ten methylene units, while the other series includes an aromatic ring with changes in the position of the acid, as spacer. Both series of polymers were obtained as methoxy-ester protected acid polymers and as polymers containing free acid groups in different amounts. pH-sensitive gels and temperature-sensitive N-isopropylacrylamide (NIPAAm) copolymers were prepared by using some of the monomeric structures described. The pH of the swelling transition of the gels changed from 3.5 up to 9.0 as a function of the spacer length and type. The lower critical solution temperature (LCST) of NIPAAm copolymers in water was lowered from 33.6°C to 6°C as a function of the co-monomer content and type. The observed changes in the pH of the swelling transition of gels and in the LCST of NIPAAm copolymers can only be explained if hydrophobic-hydrophobic and hydrogen-bonding interactions are considered in connection with the specific chemical structure of the monomers used.     

Thermal analyses of poly(N-isopropylacrylamide) in aqueous solutions and in nanocomposite gels

The coil-to-globule transition of poly(N-isopropylacrylamide) (PNIPA) prepared by free-radical redox polymerization in aqueous solutions and its nanocomposite (NC) gels were investigated by differential scanning calorimetery. The lower critical solution temperatures (LCST) of aqueous solutions of PNIPA of different molecular weights were not significantly affected by molecular weight (M _w: 0.19?×?10⁶?4.29?×?10⁶?g?×?mol^?1) or polymer concentration (1?10?wt%), although the enthalpy of transition increased with molecular weight, at M _w (<1.2?×?10⁶ g?×?mol^?1). The glass-transition temperature of PNIPA in the dried state also remained constant (138?°C), regardless of molecular weight. On the other hand, the enthalpy of the coil-to-globule transition of PNIPA in NC gels consisting of a PNIPA/clay network decreased with increasing clay concentration (C _clay), while the onset temperature (≡LCST) was almost constant, regardless of C _clay. The PNIPA chains in NC gels could be classified into the following three types: P-1, which exhibits a normal LCST transition, similar to that of linear PNIPA; P-2, exhibiting restricted transition at higher temperatures as a result of interactions with the clay; and P-3, which does not undergo that transition because of stronger restrictions. It was found that the proportion of P-3 increases with increasing C _clay. However, some P-1 and P-2 was still observed, even in NC gels with high C _clay. That the transition to the hydrophobic globular state was restricted by interactions with the clay was confirmed by measurements on PNIPA after removal of the clay from NC gels.     

Swelling and drug releasing properties of poly(N-isopropylacrylamide) thermo-sensitive copolymer gels

A series of N-isopropylacrylamide (NIPAAm) copolymer gels with different hydrophilicities were prepared from NIPAAm, hydrophilic acrylamide (AAm) and hydrophobic butyl methacrylate (BMA). The swelling and thermo-responsive properties of PNIPAAm P (NIPAm-co-BMA) and P(NIPAm-co-AAm) copolymer hydrogels were investigated. The drug loading and releasing behaviors for two kinds of model drug with different hydrophilicities were studied. The result shows that the copolymer gels present negative thermo-sensitivities. The lower critical solution temperature (LCST), equilibrium swelling degree and the initial swelling rate increase as the hydrophilicity of gels increases when the temperature is below the LCST. With increasing gel hydrophilicity the loading ratio for sodium salicylate increases, while for salicylic acid, the reverse is observed. The initial drug releasing rate of sodium salicylate and salicylic acid also increase with increasing gel hydrophilicity. The initial drug releasing rate of sodium salicylate is significantly higher than that of salicylic acid. For salicylic acid which is less hydrophilic, the equilibrium releasing ratio at high temperature is lower than that at low temperature while for sodium salicylate which is more hydrophilic, the equilibrium releasing ratio at high temperature is almost the same as that at low temperature. Equilibrium releasing ratios of the three gels are significantly different from each other for salicylic acid when the temperature is below LCST while the equilibrium releasing ratios of the three gels are all 100% for sodium salicylate. __________ Translated from Journal of Central South University (Science and Technology), 2007, 38(5): 906–911 [译自: 中南大学学报(自然科学版)]     

Synthesis, characterization, and temperature-dependent colloidal stability of poly(N-isopropylacrylamide)-grafted polystyrene/poly(styrene-co-4-vinylbenzyl N, N-diethyldithiocarbamate) hairy particles

Poly(N-isopropylacrylamide)-grafted polystyrene/poly(styrene-co-4-vinylbenzyl N, N-diethyldithiocarbamate) [PNIPAM-grafted PS/P(St-co-VBDC)] hairy particles were synthesized by photo-polymerizing N-isopropylacrylamide monomer in the presence of PS/P(St-co-VBDC) core particles. Here, the VBDC unit, which was incorporated into the surface of core particles by seeded soap-free emulsion copolymerization, acted as a photo-iniferter. By varying the polymerization conditions, a series of hairy particles having different grafting heights and grafting densities was successfully obtained. The hairy particles exhibited well-defined core/shell morphology. PS/P(St-co-VBDC) formed the core which was surrounded by PNIPAM shell. The determination of critical coagulation concentration (CCC) indicated that the hairy particles were stabilized via both electrostatic and steric mechanisms (i.e., electrosteric mechanism) at a temperature lower than LCST of PNIPAM. However, these particles gave much lower CCCs when heated to the temperature higher than LCST, exhibiting temperature-dependent colloidal stability.